January 2013 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B parts. Lots of small parts, hard to find stuff. If you need, call, as I must have it; Mike's Tractor Ranch nnn-nnn-nnnn or nnn-nnn-nnnn (Scio OR)

Allis Chalmers B, 1952, converted to 12V. Engine, clutch, carburetor, starter, generator rebuilt. New water pump, voltage regulator, starter solenoid, gauges and wiring. Good tires and sheet metal. Has working hydraulics, belt pulley, shop built rear blade, tandem disc, original saddle weights, adjustable wide front end. Starts and runs great,$1800; Jim Temple nnn-nnn-nnnn (Noti OR)

Allis Chalmers CA project or parts tractor. Complete, partially disassembled. Tin and fenders in great shape, motor disassembled, $350; Mike's Tractor Ranch nnn-nnn-nnnn or nnn-nnn-nnnn (Scio OR)

Allis Chalmers D17, sn D-17 10727. Starts, runs, and will still work. Three almost-new tires. The rear oil pan seal is leaking and needs replacing. Left rear tire old and starting to crack. Shop made 3 point hitch but have all the original hitch parts. Email for pictures, $1500; Norman Folger nnn-nnn-nnnn or xxxx@xxxx.xxx (Estacada OR)

Allis Chalmers M crawler, sn 2869, free, complete to original seat cushions, barn stored for 60 years, reduced to $1500 obo; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Allis Chalmers Monarch 35 or K belt pulley & attachment, $800; Buck Evans nnn-nnn-nnnn (Greenville IL)

Allis Chalmers WD, 1952, all new tires, restored 5 years ago, looks great, runs great, $3300; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastapol CA)

Case C, 1929, complete and stuck on cut downs to rubber. 1 has rare flat belt water pump, $750 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case CI, 1934, restored, tires like new, new rings, manifold, needs water pump, $2300 obo; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastapol CA)

Case DC tractor, rear half only. Transmission & axles, fenders & wheel centers with weights, pto, fuel tank with dash & vin tag, hydraulic pump, rare extra wide axles for 98 tread. Please dont make me scrap this. Too many good parts, $280; Erlin Santoro nnn-nnn-nnnn (Hillsboro OR)

Case SC, 1944, restored, runs great, tires excellent. Good for parade, pulling or whatever, $2000 obo; Mike's Tractor Ranch nnn-nnn-nnnn or nnn-nnn-nnnn (Scio OR)

Case SO, 1947, (orchard model) older restoration. Good sheet metal. New front tires, $1500; James Ward nnn-nnn-nnnn (Medford OR)

Case SO, 1950, older restoration, tires good, runs but needs rings, $1500; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastapol CA)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10, 1930. Photos on my website: hitnmiss.lonax.com $5500 obo; Glenn Crockett nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Caterpillar 10, 20 & 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 10, sn PT 2413. Standard gauge, runs excellent, steers great, excellent undercarriage, nice tractor, reduced to $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 15s, have two: PV7430, PV575 both run, good UC, needs restoration, your choice $1950. Check our web site www.omnitrac.com. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar 22, sn 2F-7100W, stored inside, clean, stuck, reduced to $1500 obo; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Caterpillar Carburetors for sale: 2 ea Ensign AEL for Cat 20, 2 ea Ensign AAE all brass for Cat 60, 1 ea Ensign AAE for Cat 60 with standard bowl, 2 ea Zenith K5A for Cat 22, 1 ea Ensign AEL for Cat 30, 1 ea fuel pump for Cat 22. All rebuilt Check our web site www.omnitrac.com. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar D2-5U with Holt straight dozer, electric start pony, runs excellent, good UC, $2750. Check our web site www.omnitrac.com. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar D7 3T series, sn 3T 22104 SP, built in 1952. Starts right up and is ready to go to work or a great candidate for an easy restoration. Has the rare hard nose. Also has a BG 750 two-value hydraulic pump. Undercarriage is in good condition, $2500 obo; Joe Terra nnn-nnn-nnnn (Escalon CA)

Caterpillar RD4 4G2780 with toolbar dozer runs good, blade needs a little TLC, $1500. Check our web site www.omnitrac.com. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar tractors Cat 15 thru 65, some restored, some ready to restore. All tractors are being discounted as much as 50%. If you want a collector tractor now is the time. Check our web site www.omnitrac.com. Email xxxx@xxxx.xxx, or call for a discounted price; Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Cletrac 20 or AG transmission housing and other parts; Cletrac 20, top seat tractor, nice, nearly complete, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Cletrac 55, 1936, with Garwood dozer. Very few made. Running when stored; Mike Tyler nnn-nnn-nnnn (Moore MT)

Cletrac AG Crawler Tractor. 4-cylinder gas engine. It rolls, and it does start, but it has not been run and driven in years. Looks to me to be in very restorable condition; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx for photos (Geyserville CA)

Cletrac DGH, 1946, with original lights and battery box. Running when stored; Mike Tyler nnn-nnn-nnnn (Moore MT)

Cletrac W, complete, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Cleveland H, 1918, with Weidely motor. Running when stored; Mike Tyler nnn-nnn-nnnn (Moore MT)

Complete BeGe hyd. pump, controls and tank assembly w/PTO shaft for D-2 Cat for rear remotes, reduced to $500; Don Chappell nnn-nnn-nnnn (St Helens OR)

DECALS: The correct valve cover, oil filter, fuel mixture, and now the correct air cleaner decal for the unstyled McCormick and Farmall tractors, 1940 and older. These decals are commercial grade vinyl that are oil and gasoline resistant. They apply to the 10-20, 15-30, 22-36, Regular, T-series, F-series, and W-series tractors. I'll pay the postage; $5 each or the set of four, $18; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

Farmall 350 side panels, center strip; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall B, 1945, running, fair to good tin. Extra rear tires available, $1250 obo; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Farmall Cub 1952, sn 160459. Good running tractor. Sheet metal straight, tires fair, $1500; Burle Rodgers nnn-nnn-nnnn (Sonora CA)

Farmall Cub Lo-Boy, 1957, sn 19893. Runs good, metal good, paint fair, turf tires, radiator leak, belly mower needs assembly, $1500; Don Tikka nnn-nnn-nnnn (Woodland WA)

Farmall Cub parts: Wagner Cub loader complete $400; cultivator $50; mounting plate and arm for rear lift $25; 6V generator $50; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Farmall Super M motor & shifter, stuck, great project, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Ferguson hood, older model, top opening, front decal, $100; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ferguson TO-30, recent overhaul front to back end. Good tires, good lights, $1100; Erlin Santoro nnn-nnn-nnnn (Hillsboro OR)

Ferguson, pto, mower, loader, post hole digger, scraper, weights, perfect, $3000; Bud Johnson nnn-nnn-nnnn (San Jose CA) [link to photo]

Ford 2N, 1943. Fresh valve jobs, rebuilt magneto, new tires and 12 volt starting. Ready to work or restore, $1195; Lee deVries nnn-nnn-nnnn (Crawfordsville OR)

Ford 2N, good running tractor, Wagner loader available, $1650 obo; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Ford 8N motor, sn 89310479. Not stuck, turns over; Joseph Brick nnn-nnn-nnnn (Klamath Falls OR)

Ford 8N - one 11x28 rear rim, adjustable in width, $50; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1949, sn 157349. Engine rebuilt, other parts reconditioned. Willing to take your tired 8N on trade, plus cash. Present rear tires weather-checked so keep your rear tires on exchange if in better condition. Not a show tractor; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1952, 3 point hitch, good tires and runs perfectly, $2,500. Call days only; Bob Babcock nnn-nnn-nnnn (Orange CA)

Ford 8N, series #177 makes this a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original) Much more-come see-make offer. Don Chappellnnn-nnn-nnnn (St Helens OR)

Ford 9N orchard model. tractor runs, 3 pt not working, has orchard fenders, original tool box, Ford emblem, pat. emblem asking $2400 or trade? for other steel wheel tractor? Can email pics; Dennis Rutherford nnn-nnn-nnnn or xxxx@xxxx.xxx (Norco CA)

Ford 9N with 8N engine, good runner, ready to restore, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 9N, all original, with 3pt hitch overriding clutch on PTO. Starts and runs well tires and sheet metal good, $1200; Jim Temple nnn-nnn-nnnn (Noti OR)

Ford 9N-2N-8N parts: Air cleaner, $45; Cyl head, $70; Distributor with coil & cap, $90; Hardy McFarland nnn-nnn-nnnn (Sutter CA)

Ford Ferguson 52-54?, 4 cyl overhead gas, 1/2 yd front bucket (750lb), pto, 3 pt hitch, good tires, extra wheel, 1 wheel weight, $1000; Richard Beloit nnn-nnn-nnnn (Palo Cedro CA)

Ford Jubilee, 1953, runs and drives great (no smoke). This tractor is in great shape for working or is an excellent candidate for restoration. Sheet metal is sound and straight, $2700; Eric nnn-nnn-nnnn or xxxx@xxxx.xxx. (Escondido CA)

Ford NAA 1954, runs great, good tires, a little ruff to look at, I use it every day, $2400; Jody Stover nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)

Ford new and used Ford N tractor parts, new and used, I may have just what you need, call for prices; Jody Stover nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)

Ford parts: Sherman transmission step down with clutch shaft, missing a gear tooth, cover shift fork broken, I have 1 new cluster gear, 1 new shift fork and new shift lever, $650. Sherman transmission shift levers, 10A724, have five, $50 each; Ford 2N 3106LH front spindle, new, $50; Ford 8N new steering gear sector gears, have two, $125 each; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Fordson Trackson, 1927. Running when stored; Mike Tyler nnn-nnn-nnnn (Moore MT) [link to photo]

Harris Power Horse early skid steer built in Stockton CA. Make offer; Calvin Clement nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Molinos CA)

IHC M, sn FBK234148X1, engine stuck, rear wheel weights, wide front, $1250; Wayne Tippet nnn-nnn-nnnn (Clarkston WA)

IHC M, sn FBK242723XIA, runs, tin good, 3pt, front wheel weights, wide front, $3000; Wayne Tippet nnn-nnn-nnnn (Clarkston WA)

International 350 Hi-Utility Rare 800 built gas runs 2000 hrs. fast hitch 1 hyd. remote all lights, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 684, 4-wheel drive, 4-cylinder diesel, manual transmission, category II 3-point hitch, (3) auxiliary hydraulic valves, live PTO, very good front tires, rear tires aren't much. This is a beefy, reliable farm/ranch tractor, very hard to find in 4-wheel drive! I added a very heavy front weight. I do not know real hours, as the tach has not worked for a long time; but this is a late '70s, early '80s tractor, and I have owned it for probably nearly 20 years. I additionally have available: a very heavy-duty and hard to find Rhino 1400 7' hydraulic 3-point blade, and a 7' Rhino 3-point double-blade chopper/mower/mulcher; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx for photos (Geyserville CA)

International TD6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International TD6 orchard tail seat, runs good, steers good, tinware is nice and straight. Good undercarriage, has hydraulics and one remote, $5,000; Dennis Gullick nnn-nnn-nnnn (Redwood Valley CA)

John Deere 1010, 1964, sn 1010U-46960. Has dual tires in the rear, pto, 7ft. blade. 36 Hp 4 Cyl. 5ft. Bucket loader in front. Cage over driver seat. Original paint color of orange. This tractor worked well, but did not have anti-freeze in radiator past winter, now water in oil, will run with some encouragement. Possible/probable cracked ?, $1800; Mike nnn-nnn-nnnn (Auburn WA)

John Deere 18 spoke rims, have 2. Sandblasted and primed, ready to paint, $100; Les Wallace nnn-nnn-nnnn (Milwaukie OR)

John Deere 40, 1953. Excellent shape and nice running, $2,800; Leo Bethje nnn-nnn-nnnn (La Center WA)

John Deere 40U, sn 63633. Runs well, has real good tires, good seat & 3 pt hitch, $3000 cash; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 440 CI with blade, good shape, $5,000; Jerry Isakson nnn-nnn-nnnn (Sandy OR)

John Deere 5010 rebuilt pump excellent runner, $5000. John Deere 730 diesel electric start, wide front good tractor used for baling, $5000. I have over 100 restorable tractors of most makes. E-mail me with your wants I may have it. Prefer to sell whole tractors; Jerry Nash nnn-nnn-nnnn (Bridger MT)

John Deere 520, sn 5202779. Single front wheel, 3 pt hitch, $4000 cash; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 524 9 foot front blade. Will fit 40 series JD tractors or others with modification, $1000 obo; Tom Butterfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Joseph OR)

John Deere 60 parted out, lots left: crank, block, head, flywheel, grill, hood, governor, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere A, 1938. Running when stored; Mike Tyler nnn-nnn-nnnn (Moore MT)

John Deere AO parts tractor, 1945, not complete, $450; Dave Itel nnn-nnn-nnnn (Aurora OR)

John Deere AO, 1953, electric start, totally restored, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1938, on spokes, rebuilt engine, $4950; Don Chappell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

John Deere B, 1939 parts: head, block, pistons complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939, fair shape, $1200; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere BO, electric start very nice, $5000; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1928, with extra rims. Running when stored; Mike Tyler nnn-nnn-nnnn (Moore MT)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere Factory Dual 9-Bolt Hubs (with wedges) and Rims. The part numbers on the hubs is R28490R which will fit many tractors from the John Deere 60 -730 and many new generation tractors including 3010s, 4010s, 4020s, etc. The part number for the wedges are A4384R and R32224 and are specifically for a 3 1/8 axle (3010, 3020, 4000, 4010, etc.) No cracks in the hubs or sleeves! Rims will fit 15.5x38 tires, part number JD3222. Hubs would be great for tractor pulling as well. Hard to find!! Price reduced to $550; Matthew Terra nnn-nnn-nnnn (Escalon CA)

John Deere Factory Dual 9-bolt hubs (with wedges) and rims. The part numbers on the hubs is R28490R which will fit many tractors from the John Deere 60 -730 and many new generation tractors including 3010s, 4010s, 4020s, etc. The part number for the wedges are A4384R and

R32224 and are specifically for a 3 1/8 axle (3010, 3020, 4000, 4010, etc.) No cracks in the hubs or sleeves! Rims will fit 15.5x38 tires, part number JD3222. Hubs would be great for tractor pulling as well. Hard to find!! $700 obo; Matthew Terra nnn-nnn-nnnn (Escalon CA)

John Deere GP, 1930, rebuilt engine, on rubber, reduced to $2750; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere H, 1946, electric start, restored, very nice, reduced to $3500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere H, electric start, runs good, $3970; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere L engine, electric start, clutch, $400; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere L, 1940. Excellent shape and runs great, $3,500; Leo Bethje nnn-nnn-nnnn (La Center WA)

John Deere LA, 1941, nice tractor, no tag, $2500; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere late model B R.O.M front end, $250; hood uncut, $100; other parts available; Steve Zane nnn-nnn-nnnn (Paynes Cr. CA)

John Deere M, sn 679718. Tin good with some damage around radiator cap. Narrow front. Tires good with some weather check, runs strong. Been using it farming summer fallow and at plowing bees, $2500; Wayne Tippett nnn-nnn-nnnn (Clarkston WA)

John Deere MC, totally restored, as new, $5000; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere NOS clutch pulley, $300; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere R, 1953. Both engines start and run well. Sheet metal good minor grill dents. Tires hold air. Have 1953 parts tractor. Will sell running tractor for $3000, or all for $3800; Jim Temple nnn-nnn-nnnn (Noti OR)

John Deere tractors: JD 40U, sn 63633 and JD 520, sn 520 2779 (?), $7000 for both; JH Keith nnn-nnn-nnnn (Hermiston OR)

John-Deere A, 1935, on spoke wheels, older Wards Riverside rear tires, single front end with dual tires, good running condition, $2,850. Also have a John-Deere 116W Baler with a four cylinder Wisconsin motor (loose). It's all there, just needs restored, $1,950. Will separate or deal for both, can email photos; Russ Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Vale OR)

Massey Ferguson 98 tractor, restored, 371 GM engine, all new rubber, $18000; Dave Itel nnn-nnn-nnnn (Aurora OR)

Massey Harris 101 Jr. Standard, runs, needs side panels, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 444 gas standard, 1 finger power steering, live pto hydraulic remote, runs good, great sheet metal hard to find, $1600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massy Harris 81, 1941. Runs good, has been converted to 12 volt. Good rubber, new battery, Rebuilt master cylinders fresh grease in transmission and rear axle. Everything works as it should, $1000 obo; Mark Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)

McCormick Deering I-4, have 2. One complete, turns over, good shape. Other is a parts tractor. Both for $1650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4: Runs, missing some orchard sheet metal, $1250; McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $2000 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Minneapolis Moline GVI, 1960, 476 cu in engine. 6 cyl, factory L.P. Priced fair obo. This is a powerful unit. Barn fresh in excellent condition, low hrs; Stu Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)

Minneapolis Moline Z 1952, sn 00800253. Wide front end, nice tin, needs tires, needs restoration $500; Augie Scoto nnn-nnn-nnnn (Atwater CA)

Minneapolis Moline, 1944, 4 spd, 4 cyl gas, tricycle front, row crop, one flat rear tire, hasnt run in 2 years, good steering, 12.38 tires on back, $600; Richard Beloit nnn-nnn-nnnn (Palo Cedro CA)

Oliver 60 row crop, restoration started, good sheet metal, rear tires good, fronts poor. Missing one side panel, $950; Steve Zane nnn-nnn-nnnn (Paynes Cr. CA)

Oliver 66 row crop narrow front end, $275; Steve Zane nnn-nnn-nnnn (Paynes Cr. CA)

Oliver 70 motor parts disassembled, $75; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver HG 42 blade & parts Cat, $900; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

Parting out: Monarch 35; Minnie M5 diesel; Massey 65; Buck Evans nnn-nnn-nnnn (Greenville IL)

Reproduction parts: Solid brass fuel shutoffs $55.00, primer petcocks $65.00, compression relief petcocks $67.50. Shift knobs 2 oval $12.60, 1-3/8 round knobs $9.10. Battery box covers for D2-D6 $30.00, battery box thumb screws $18.00 per pair. Cat 30 and 60 brass radiator tubes with fins $27.50 and $29.50.Brass fuel inlet bowls for most Ensign carbs $48 with acorn nut $60, Cat 60 fender kits and track frame covers. New reproduction ID plates, Cat 60-75 fan Shrouds $490, Durabla High temp gasket material 18x18 sheets $32, crank recoil springs $12; Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Rim: 1 center drop 42in rim, $75; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Rumely K, 12-20 engine gears. Crankshaft, camshaft and governor gears, nice machined new gears, have 2 sets $1500 per set; Dennis Rutherford nnn-nnn-nnnn or xxxx@xxxx.xxx (Norco CA)

Tires: two Power Mark Rear Tires - 12.4x28 - 4 ply, Made in USA, $200 for the pair; Bob Babcock nnn-nnn-nnnn (Orange CA)

Tractors, parting out: Minneapolis Moline M-5 diesel. Massey 65; Allis Chalmers Monarch 35 or K; Caterpillar 10, 30, 20. New old stock John Deere A clutch pulley, $300; Buck nnn-nnn-nnnn (Greenville IL)

Used parts for Cat 10, 15, 20, 22, 30, 40, 60, D2, D4, 2 Ton, D2, D4, JD Lindeman and JD crawlers, some TD6 and TD9 parts. Check our web site www.omnitrac.com; Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Wheel weights: for 16" wheels, $200 for the set; JH Keith nnn-nnn-nnnn (Hermiston OR)

Wheel weights: Large Minnie rear wheel weights, $200. Case V rear wheel weights, $200. David Bradley, $100. Minnie 4-star front weight bracket, $100. Front weights, $50 each; Buck Evans nnn-nnn-nnnn (Greenville IL)

Wheel weights: Large Minnie rear wheel weights, $200. Case V rear wheel weights, $200. David Bradley, $100. Minnie 4-star front weight bracket, $100. Front weights, $50 each; Buck Evans nnn-nnn-nnnn (Greenville IL)

Wheels: 3 industrial front wheels w/hard rubber and cast centers for Case L or LA, $100 each or 3 for $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Wheels: One factory front round-spoke wheel for John Deere BO-BR, good spokes & hub, needs new rim, $100. One rear factory flat-spoke wheel for John Deere A or B. Takes bolt in hub. One factory 10-spline round-spoke rear wheel for unstlyed JD B. One steel wheel with extension for JD A. Pair of Tip-Toe steel wheels for JD B, hubs bad, good lugs; Dave Itel nnn-nnn-nnnn (Aurora OR)