January 2013 - Misc. For Sale

All Classified Ads

1000 gallon water tank; David Santoro nnn-nnn-nnnn or Erlin Santoro nnn-nnn-nnnn (Hillsboro OR)

16 inch four jaw chuck with T slots, D1-6 back, good condition; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

All-Crop forage Harvester pto with windrow attachment, $550; Philip S. Robustellini nnn-nnn-nnnn or nnn-nnn-nnnn (Montague CA)

Anvil & base: Clean 400 lb Peter Wright anvil and 400 lb Cast Base, 800 lbs total. Anvil is 36-1/4" long has a 23" X 5-1/2" face and is 15" tall. Cash only, $2650; Bernie Swetz nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Rosa CA)

Baler: Massey Harris twine with V4 Wisconsin engine, 1950's paint & decals still mostly there, not running, $450; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Blacksmith equipment: Power hammer - hammer was made in the 1920's from plans in the Blacksmith journal. Made from weldments but looks like a casting, $1200. Blacksmith cone - 4' cast iron cone, $375. Swage blocks - 2 cast iron blocks, $125 ea. Email for pictures; Norman Folger nnn-nnn-nnnn or xxxx@xxxx.xxx (Estacada OR)

Combine: Allis Chalmers All-Crop 66 combine, complete, self-powered, restore or for parts, otherwise going to scrap, $150 obo; Tom Winterrowd nnn-nnn-nnnn (Canby OR)

Combines: All-Crop 60 combine, with motor, bulker, $450; All-Crop 60 combine w/pto and bulker, $375; Philip S. Robustellini nnn-nnn-nnnn or nnn-nnn-nnnn (Montague CA)

Crucible, used for melted metals. 10" tall, 8" diameter. Walls are 3/4" thick. Has markings on it: AES5293 Aug 15 No. 20, $75; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Drill Press Radial: American Radial Drill, 3' arm with a 9" column, made by American Tool Works Co. in Cincinnati, Ohio. Speed range from 70 rpm to 308 in low--352 rpm to 1500 in high. #4 Morse taper with a box table. This is a 3 phase machine. Working unit, weighs about 4000 pounds, $1700; Bernie Swetz nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Rosa CA)

Ersted 5000 lb 2 drum building hoist, weighs about 1000 lbs, very clean, Ersted is the forerunner of the Hyster Company, made in Portland around 1925, $1000; Bob Qualey nnn-nnn-nnnn (Silverton OR) [link to photo]

Fire hydrant from City of Heppner, OR. Real nice. Has the riser pipe still on it, $200; JH Keith nnn-nnn-nnnn (Hermiston OR)

Forklift: Clark rebuilt gas engine with new clutch. Lift 3000 lbs or more. Side shift on forks. Pneumatic tires. Everything works good, $2350; Dan McCullough nnn-nnn-nnnn or nnn-nnn-nnnn (Klamath Falls OR)

Fresno (?) horse-drawn scraper box, missing wheels, very cool to restore or for a yard ornament, $150; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx for photos (Geyserville CA)

Front loader: John Deere 45R, quick connect, hydraulics & mounting brackets. Fits JD 50, 60, 70, 55, 65, 75 tractors; Bruce Alexander nnn-nnn-nnnn or nnn-nnn-nnnn (Spirit Lake ID)

Generator: 85 KW International engine, 240 volts, 3 phase 4 wire can be changed to higher voltage with auto transfers; $1200 obo; Larry Busack nnn-nnn-nnnn (Longview WA)

Generator: Homelite LR5000T, 5000 watt, 120/240 volt, like new with book, $450; Ray Koenig nnn-nnn-nnnn (Klamath Falls OR)

Grader: Russell Hiway Patrol horse-drawn road grader, $600 obo; Paul Hadden nnn-nnn-nnnn (Desert Hot Springs CA)

Grain auger: 6"x20 ft, mounted on wheels, and pto driven; David Santoro nnn-nnn-nnnn or Erlin Santoro nnn-nnn-nnnn (Hillsboro OR)

Grain drill: Massey Harris 8 ft on steel wheels, yard art, $150; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Harrow, spring tooth, 7' wide, 3 point hitch, very good condition, ready to work, $225 obo; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Hay baler: Case, on steel spoked wheels, flatbelt driven, looks complete, needs new wood parts. Appears to me to be very restorable, or makes nice yard ornament, $450; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx for photos (Geyserville CA)

Horse-drawn mail cart, put in service in 1871 in Cornelius OR. Needs restoration. Price reduced to $1500; Mert Griffin nnn-nnn-nnnn (Clatskanie OR) [link to photo]

Implements: John Deere M slant bottom plow; John Deere M disk; Jerry Isakson nnn-nnn-nnnn (Sandy OR)

John Deere cultivator, 1 row walk-behind in wood handles with front depth wheel. Excellent original condition from the ‘20’s, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere Lindeman LS200 Land Shaper. 20' Long. Very rare. Complete except for tires. Have book. Best offer; nnn-nnn-nnnn cell (Clatskanie OR) [link to photo]

John Deere Lindeman LS400 Land Shaper. 40' Long. Very rare. Complete except for tires. Have book. Best offer; nnn-nnn-nnnn cell (Clatskanie OR) [link to photo]

John Deere model 940 land plane 12' wide 40' long, all in good working condition and ready for work. This is a very nice and complete piece of equipment, $5000; Ervin Thompson nnn-nnn-nnnn (Battle Mountain NV)

Lathe: 14 in Ryerson overhead line shaft driven lathe with accessories, nice condition for its age, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Lathe: Craftsman 6 in lathe, made by AAA with chucks, back gears, tool post hardware, etc, nice condition; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Mailbox: Caterpillar mail box, comes with steel post, $400; Mert Griffin nnn-nnn-nnnn (Clatskanie OR) [link to photo]

Mailbox: tractor mailbox, comes with steel post, $300; Mert Griffin nnn-nnn-nnnn (Clatskanie OR) [link to photo]

Maytag washing machine, square tub model. Has the original elec. motor. All there, castors and complete wringer, all work. Needs to be taken apart and reassembled. Make a nice project, $75; Ken nnn-nnn-nnnn (Clarksburg CA)

Mower: John Deere Big 4 horse drawn mower, fully restored; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Oliver Superior Seeder or seed drill. Pull-type on steel spoked wheels, with yellow painted metal hoppers on top that say "Oliver Superior". I think it is a 10'. Appears to be complete, rolls OK, makes a very nice display. Bottom of boxes rotted some, $400; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx for photos (Geyserville CA)

Orchard sprayer, always covered, model A wheels, $600; Bud Johnson nnn-nnn-nnnn (San Jose CA) [link to photo]

Plow: Ferguson 2-bottom 3pt plow, complete, $250; Paul Hadden nnn-nnn-nnnn (Desert Hot Springs CA)

Propane tank: 82 gallons, 60% full, think it’s a D.O.T. tank, $300; JH Keith nnn-nnn-nnnn (Hermiston OR)

Rotex indexing sheet metal punch, 18 in throat, 1/8 in to 2 in capacity, nice condition, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Sasgen hoist crane, swings, hand winch with brake, $200; Buck Evans nnn-nnn-nnnn (Greenville IL)

Scales: Fairbanks Morse 2500 lb scales. Two column, pat 1909, $300; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)

Scraper, Gannon roll over with rippers, 3 point hitch, 66" wide, very good condition, ready to work, $650 obo; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Sewing machine for closing grain sacks, complete and not a rusty wreck, $250; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Tires: Two good 12.4-42 BF Goodrich, one 12.4-40 Goodyear, one13.6-36 Galaxy, and one 9.5-24 turf type tire; Merf nnn-nnn-nnnn (Hemet CA)

Trailer: Heavy duty set up for large engine, $600 obo; Tom Beery nnn-nnn-nnnn (Mi-Wuk Village CA) [link to photo]

Trailers: have two 4’x8’, 12” tires. One is a tilt bed, in good shape with new tires, $350. Box trailer, good shape, $250; Ray Koenig nnn-nnn-nnnn (Klamath Falls OR)

Trash burner/wood stove, made by Frigidaire Co. Stove is in good condition, $300; JH Keith nnn-nnn-nnnn (Hermiston OR)

Trash-burner stove, nice old one made by Frigidaire Co, $300; JH Keith nnn-nnn-nnnn (Hermiston OR)

Valve grinding machine, with stem chuck and grinding wheel, vintage useable condition. Can accept valve stems up to 5/8 in, $300; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Walnuts: Black walnuts, all washed and clean, 5 pounds for $15 plus shipping; JH Keith nnn-nnn-nnnn (Hermiston OR)

Windmill: Aermotor 28 ft windmill, $850 obo; Paul Hadden nnn-nnn-nnnn (Desert Hot Springs CA)

Wooden horse-drawn wagon parts, several pallets of misc, $100 for all; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx for photos (Geyserville CA)