March 2013 - Vehicles

All Classified Ads

1927 Model T Roadster looks and runs great, nice top, Ruckstell, extra parts, wire wheels, older restoration but very nice car, $7500; E. Phillips nnn-nnn-nnnn (Coquille OR)

1930s-1940s Chevrolet 9' pickup bed for sale; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Geyserville CA)

1931 Ford model A 4-door Town Car. 2000 miles on engine overhaul. Recently reupholstered. Excellent condition, ready to drive, $13,950; Dennis Flint nnn-nnn-nnnn (Goldendale WA) [link to photo]

1940s Ford truck hood; Dave Gallant nnn-nnn-nnnn (Boring OR)

1946 Chevrolet Truck cab & Chassis (no bed) not running, have old title that came with it. Sheet metal is rusty but very straight, truck is very complete, but getting weathered. Frame is approx. 10' long behind cab. It had a flatbed on it when I got it, I believe it was a 12' bed. A 7-1/2' wide bed would just cover the duals, $2,200; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Geyserville CA)

1947 International KB5, 1-1/2 ton, 12 IHC stake bed, solid truck restoration project, $1000; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)

1948 Dodge 1-1/2 ton truck, 6 cylinder, 4 speed, good 14ft flat bed. 9:00-20 tires, ran when parked. Have pink & non-op, $1200 obo; John Strecker nnn-nnn-nnnn (Kingsburg CA)

1950 Chevy 1-1/2 ton big truck, nice shape, has pink slip, no smog! $500; Augie nnn-nnn-nnnn (Atwater CA)

1950 GMC Series 250, 228 engine w/ 4 spd. Very good runner and tires. Completely re-furbished inside and out. Delivery possible, $3,250; Russ Shorten nnn-nnn-nnnn (Dayton WA) [link to photo]

1950 REO 10 wheel Dump truck, parts only no engine, $1000; John Caufield nnn-nnn-nnnn (Ridgecrest CA)

1951 M38 Jeep, It's all apart with body just setting on frame, frame and diffs are cleaned and ready, all tires are great, body needs a little repair but it's not that bad, have two F head engines, one is 85% completed. Not parting out, it's for sale complete. I have pictures that can be emailed, $1800; Gary Bridges nnn-nnn-nnnn (Paradise CA)

1953 International L-120 engine & transmission, $100 each; Buck Evans nnn-nnn-nnnn (Greenville IL)

1954 Autocar tractor (6 wheel) 4 and 4 transmission w/ Cummins NH220; rough condition-running when parked $2000; John Caufield nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

1955 Autocar. 262 Cummins with jake brake, 40lbs. idle, 70lbs. at 1500, runs great, 5+3 SQDD on Rockwell Camelback, 12 yd dump box, no tailgate. Sheet metal and glass all very good. Box is rough. Has 16.5 X 22.5 Duplex tires on front. e-mail xxxx@xxxx.xxx for pictures. Price reduced to $3750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

1956 Chevrolet parts: 265 engine with two-speed power glide. Includes five 16" rims, misc trim parts, etc, $500; Ed Bring nnn-nnn-nnnn (Molalla OR)

1966 Ford 330 cid pistons (9) 4 ring standard Badger pistons O.D. 3.8750, 1 set of Hastings standard rings, Ford 6607S; $200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1977 Chevrolet pickup 4x4, 350 engine, 4 speed, one owner. Glass is all good, $1000; JH Keith nnn-nnn-nnnn (Hermiston OR)

1992 Ford F250, extended cab, 7.5 litre gas V8, runs well, decent condition inside and out, automatic transmission needs rebuilding, $700; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)

1996 Dodge 1 ton for sale or trade The engine is 6 cyl. turbo diesel, freshly rebuilt. It has a five speed transmission, four wheel drive, ABS, air conditioning, sliding rear window, power windows, door locks and seats, cruise control, power steering & brakes, good quality AM/FM and cassette, bed liner, tow package and gooseneck receiver, dual rear wheels. $11,500. Photo available on request; Ron Nevins nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

Auto cruise electronic speed control by Sears model 218-20314 with lever type control switch & 318-20312 with clamp type control switch, $50; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Books: 1971 Chevrolet Passenger Chevelle Nova Camaro Parts & Accessories Catalog, Sept 1970, $20; 1971 Chevrolet LUV Series 6 shop manual, $15; 1968 Sears replacement parts for Jeep utility vehicles, 50 pgs, $20;Montgomery Ward Riverside military and civilian Jeep replacement parts, 50 pgs, $20;; Prices listed plus S&H. Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Canopy frame, aluminum. Came off a 1947 Ford pickup originally, was canvas covered. Frame only, $175; Jim or Bill nnn-nnn-nnnn (lv msg) (Centralia WA)

Land Rover, series 2A engine, all there except for correct carb. Engine free and in good shape, paid $400, will sell for $400 with some extra parts; Don Weburg nnn-nnn-nnnn (Arcata CA)

Morris Minor doors, have pair in good shape, $50 each; Don Weburg nnn-nnn-nnnn (Arcata CA)

Tailgate door for 60 or 70 Chevrolet pickup; Dave Gallant nnn-nnn-nnnn (Boring OR)

Tires: 7:00x15LT Power King ties, super traction, presently on VW rims, two tires, $50 each; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Tires: Six 8.00x16.5 M/S tires with 85% tread on Chevy dual wheels. These are in very good condition. $350 or trade for equivalent 7.50x16.; Russ Shorten nnn-nnn-nnnn (Dayton WA)

VW powered on road/off road vehicle, 4 seats, clear Washington state title. Froze rebuilt engine not running, $3000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Wanted: 1941 to 1952 Chevrolet 1.5 ton truck ring & pinion set or complete dually rear end. Must be 5.43 gear ratio. Will pay top dollar; Tango88 nnn-nnn-nnnn or xxxx@xxxx.xxx (Houston TX)

Wanted: 1949-1951 Ford convertible wanted to restore or buy; Don Cysiewski nnn-nnn-nnnn (Apache Junction AZ)

Wanted: 1956 Chevrolet 2-door; Charlie Parish nnn-nnn-nnnn or nnn-nnn-nnnn (Merced CA)

Wanted: 1967 or earlier Volkswagen Bus. Hoping to fix it up as a graduation present for my daughter; Steve Johnston nnn-nnn-nnnn or xxxx@xxxx.xxx (Meridian ID)

Wanted: Ford Model A, coupe or sedan; Larry Christenson nnn-nnn-nnnn (Newberg OR)

Wanted: Hemi motor; Charlie Parish nnn-nnn-nnnn or nnn-nnn-nnnn (Merced CA)

Wanted: Old VW bus or pickup; Charlie Parish nnn-nnn-nnnn (Merced CA) [link to photo]

Wanted: pre-1940 Ford/Dodge/Chevy 1/2 ton truck; Steve Johnston nnn-nnn-nnnn or xxxx@xxxx.xxx (Meridian ID)

Wanted: Willys Overland station wagon, with 6 cylinder engine, 4 wheel drive, in restorable condition; Jesse Mason Jr nnn-nnn-nnnn (Tillamook OR)

Wanted-Pre 1966 Kenworth small window cab trucks/parts/pieces. Please send pix and prices. We also have some parts for sale including emblems, hoods, doors, cabs, engines, transmissions; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Wheels: four 16" alloy wheels, 6-hole, Chev 1500, late '90's~early 2000's. with LT245/R75-16 tires @ 80%, $250; Ed Bring nnn-nnn-nnnn (Molalla OR)