April 2013 - Vehicles

All Classified Ads

Estate sale of entire collection of mostly Ford Model A and some T parts. Selling all automotive parts in building to single buyer. Must take everything automotive related. Includes 5 Model A engines (don’t know if any are Model B or not), lots of transmissions, bell housings, axles, steering columns, some flathead V8 parts, lots of wire wheels and used tires, some grille shells and fenders, carburetors, generators, starters, etc. too much stuff to list. Some non-Ford items like 41 Plymouth parts, and other manufacturers. Photos will be available on internet later. Would be several pickup and trailer loads of stuff. Stored in a shed on the Oregon coast between Seaside and Astoria. Engines must go in the last load as the object is to empty the building of all car parts and not just the most valuable items. $3000 for everything, if a person buys it all based on photos then first $3000 gets it, if a person needs to look it over a date will have to be set when George is available and everyone interested can

view at same time and highest offer gets it. This is a great deal for someone that sells old car parts; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)

1927 Model TT, stakebed, restored, runs, $11,500; Don Meakin cell nnn-nnn-nnnn (Flagstaff AZ)

1931 Ford model A 4-door Town Car. 2000 miles on engine overhaul. Recently reupholstered. Excellent condition, ready to drive, $13,950; Dennis Flint nnn-nnn-nnnn (Goldendale WA) [link to photo]

1936 International truck wanted; Dave Gallant nnn-nnn-nnnn (Boring OR)

1940’s Ford truck hood; Dave Gallant nnn-nnn-nnnn (Boring OR)

1947 International KB5, 1-1/2 ton, 12’ IHC stake bed, solid truck restoration project, $1000; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)

1948 Dodge 1-1/2 ton truck, 6 cylinder, 4 speed, good 14ft flat bed. 9:00-20 tires, ran when parked. Have pink & non-op, price reduced to $1000 obo; John Strecker nnn-nnn-nnnn (Kingsburg CA)

1949 Chev one half ton pickup. Clean WA title, rust free body, truck is apart and bed has been sandblasted. Excellent three window cab, good fenders, hood and doors. Truck is an older conversion to Chev 350 motor which is now stuck. Extra flatbed goes with truck. Fifteen hundred dollars. Bob Gauntt nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

1950 Chevy 1-1/2 ton big truck, nice shape, has pink slip, no smog! $500; Augie nnn-nnn-nnnn (Atwater CA)

1950 GMC Series 250, 228 engine w/ 4 spd. Very good runner and tires. Completely re-furbished inside and out. Delivery possible, $3,250; Russ Shorten nnn-nnn-nnnn (Dayton WA) [link to photo]

1953 International L-120 engine & transmission, $100 each; Buck Evans nnn-nnn-nnnn (Greenville IL)

1953 Van Pelt fire engine. Open cab pumper. The pump is rated at 1008 gallons per minute at 150 lbs pressure. It is mounted on a 1953 GMC model 634 chassis with a 503 cubic inch 6 cylinder gas engine. It runs and drives and the paint is in good condition for its age. $4750; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or Bob Burnett nnn-nnn-nnnn or e-mail xxxx@xxxx.xxx (Klamath Falls OR)

1956 Willys Jeep with 1966 318, not running but not stuck. $1500. Email for a picture or call nnn-nnn-nnnn xxxx@xxxx.xxx; Jack Fusari nnn-nnn-nnnn (Madera CA)

1959 Desoto, Four Door, auto trans, engine is short blocked tore down in frame with parts in trunk, it has been in my yard for over 15 years no title, will give a bill of sale. $900. Email for pictures xxxx@xxxx.xxx; Jack Fusari nnn-nnn-nnnn (Madera CA)

1966 Ford 330 cid pistons (9) 4 ring standard Badger pistons O.D. 3.8750, 1 set of Hastings standard rings, Ford 6607S; $200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1966 Mustang six cylinder car, engine out of car with two cracked pistons, $1900. Email for pictures xxxx@xxxx.xxx or nnn-nnn-nnnn; Jack Fusari nnn-nnn-nnnn (Madera CA)

1969 Ford W1000 Semi tractor with Detroit in-line 671 with less than 100 miles since overhaul. Complete truck with sleeper style cab, 2nd day cab included for parts. Used as a lot vehicle to move trailers, at a well-known Silverton Oregon truck repair shop until owner died in 2008. This is

a complete restorable original Ford "Crackerbox" Semi. $1500; Brian Sparks nnn-nnn-nnnn or xxxx@xxxx.xxx (Monmouth OR)

1977 Chevrolet pickup 4x4, 350 engine, 4 speed, one owner. Glass is all good, $1000; JH Keith nnn-nnn-nnnn (Hermiston OR)

1990 Kenworth motor home, matching enclosed trailer, $35,000; Dave Williams nnn-nnn-nnnn (Norco CA) [link to photo]

1992 Ford F250, extended cab, 7.5 litre gas V8, runs well, decent condition inside and out, automatic transmission needs rebuilding, $700; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)

Auto cruise electronic speed control by Sears model 218-20314 with lever type control switch & 318-20312 with clamp type control switch, $50; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Books: 1971 Chevrolet Passenger Chevelle Nova Camaro Parts & Accessories Catalog, Sept 1970, $20; 1971 Chevrolet LUV Series 6 shop manual, $15; 1968 Sears replacement parts for Jeep utility vehicles, 50 pgs, $20;Montgomery Ward Riverside military and civilian Jeep replacement parts, 50 pgs, $20;; Prices listed plus S&H. Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Canopy frame, aluminum. Came off a 1947 Ford pickup originally, was canvas covered. Frame only, $175; Jim or Bill nnn-nnn-nnnn (lv msg) (Centralia WA)

Dodge 1-1/2 ton truck gallion gravel box, runs good oil presser, no smoke, good tires. Old civilian conservation corps truck, $1250; Donald Kravik nnn-nnn-nnnn (Whitehall MT)

Ford Model T turtleback trunks, have two, one $275, one $75; Dave Gallant nnn-nnn-nnnn (Boring OR)

Jaguars 1991 & 1994 both cars for $3000. The 1991 is road worthy and non opped, it just has a problem with the accumulator for the brakes. The 1994 is just for parts, has no hood or outer front fenders. It runs and drives but cannot be put back into service, therefore no title. Jack Fusari nnn-nnn-nnnn or xxxx@xxxx.xxx (Madera CA)

Land Rover, series 2A engine, all there except for correct carb. Engine free and in good shape, paid $400, will sell for $400 with some extra parts; Don Weburg nnn-nnn-nnnn (Arcata CA)

Morris Minor doors, have pair in good shape, $50 each; Don Weburg nnn-nnn-nnnn (Arcata CA)

Radiators: Radiator from 1959 International $185, $100 cash. Radiator from 1957 Dodge 700, $100 cash. Each with their mounting frame; Mike nnn-nnn-nnnn (Puyallup WA)

Tailgate door for ’60 or ’70 Chevrolet pickup; Dave Gallant nnn-nnn-nnnn (Boring OR)

Tires: 7:00x15LT Power King ties, super traction, presently on VW rims, two tires, $50 each; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Vehicles: Ford Model A bodies, 1942 Dodge Military, 1934 Dodge 1 ton, 1944 Dodge COE, 1946 Chev with COE cab, 1928 Model A truck; C Wallace nnn-nnn-nnnn (Toledo WA)

VW powered on road/off road vehicle, 4 seats, clear Washington state title. Froze rebuilt engine not running, $3000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Wanted for a 1967 or 68 International 1/2 to 1 ton truck, a radiator valance and grill, and head light housing; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Wanted: 1941 to 1952 Chevrolet 1.5 ton truck ring & pinion set or complete dually rear end. Must be 5.43 gear ratio. Will pay top dollar; Tango88 nnn-nnn-nnnn or xxxx@xxxx.xxx (Houston TX)

Wanted: 1941-45 Jeep, Willys MB / Ford GPW parts or project; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Issaquah WA)

Wanted: Ford Model A, coupe or sedan; Larry Christenson nnn-nnn-nnnn (Newberg OR)

Wanted: Hemi motor; Charlie Parish nnn-nnn-nnnn or nnn-nnn-nnnn (Merced CA)

Wanted: Old VW bus or pickup; Charlie Parish nnn-nnn-nnnn (Merced CA)

Wanted: tandem twin screw complete setup for KB7,L170,R170 or maybe a R 180 International trucks; Donald Kravik nnn-nnn-nnnn (Whitehall MT)