July 2013 - Tractors & Parts For Sale

All Classified Ads

50+ tractors and parts including Rumley, Bull, Heider, Emerson Brantingham, The Minneapolis, Twin City, Allis Chalmers, Caterpillar, Hart Parr, Graham Bradley, Cletrac, Gibson, Wallis, Oliver, John Deere, BO Lindeman wide gauge, Farmall, McCormick Deering, Case. Most all on steel wheels, and priced to sell; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Allis Chalmers 1949, sn c64679 rebuilt engine, starter Gen 6 volt system 95% tires, has hydraulics, sheet metal is straight and fresh paint. Farm or parade ready; Bob Bowman nnn-nnn-nnnn (Sheridan OR)

Allis Chalmers G with cultivators. Runs good. Easy restoration, good sn, $3000 or obo; Pay Boyle nnn-nnn-nnnn (Washougal WA)

Allis Chalmers G, 1955. Restored. Engine completely rebuilt. New rubber. $3000; Duane Friend nnn-nnn-nnnn or xxxx@xxxx.xxx (Zillah WA)

Allis Chalmers HD7 w/blade and Carco F6 winch. Engine rebuilt but left final drive bearings out. Looking to sell or start parting out or cutting up for scrap soon. If you want a piece give me a call; Brian Clark nnn-nnn-nnnn or xxxx@xxxx.xxx (Scappoose OR)

Allis Chalmers tractor, $800; Norma Savell nnn-nnn-nnnn (San Bernadino CA)

Allis Chalmers WC, 1940, runs great, painted 9 years ago, $900; Wes nnn-nnn-nnnn (Goldendale WA)

Allis Chalmers WD, 1952, restored, new tires, with hand clutch, 2 pt, live pto, $2500 or offer; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastopol CA)

Allis Chalmers WD, runs great, excellent tin, narrow front, has built in hydraulics and front end loader. Tires are like new, spin-out rear wheels, paint is good, $1500. Bud Davis nnn-nnn-nnnn (Arlington WA)

Allis Chalmers WD/ WD45: High crop wide front axle: $250. Standard wide front: $100. Other WD45 parts available such as complete engine (not stuck, but was run low on oil)$250. Other good mechanical parts but sheet metal rough, no wheels or tires; Len Hoops nnn-nnn-nnnn (Estacada OR)

Axle shafts, complete set of steel wheels front and back with lugs for F 20 & F 30 tractor; Jerry nnn-nnn-nnnn (Gaston OR)

Best 60, 1925. Disassembled and needs restoration. Complete. Caterpillar 60, 1926. Disassembled and needs restoration. Complete with extra radiator. Both for $8000; Dick Watson nnn-nnn-nnnn (Gridley CA)

Case 400, 1959. Freeman loader, hydraulics, case-o-matic, $2500, interesting trade may be possible; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case D parts: cast iron grill, manifold, radiator (like new), etc. Call for prices & details; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastopol CA)

Case D, 1947, runs good, needs tires, paint, $1000; Sam Turley nnn-nnn-nnnn or xxxx@xxxx.xxx (Clyde Park MT)

Case DC, 1949, good, needs paint, $1200; Sam Turley nnn-nnn-nnnn or xxxx@xxxx.xxx (Clyde Park MT)

Case SC wide front, new front tires, engine junk, $500; Harry Lindahl nnn-nnn-nnnn (Richvale CA)

Case SC, 1953. Good metal, paint oxidized, $1900, trade?; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case SO, 1950, runs, needs restoration. Decent tires. Older restoration, asking $1100; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastopol CA)

Case VA 1944, wide front, hydraulics work, runs good and good tires all around. Complete additional VA parts tractor, $800 for all; Bud Davis nnn-nnn-nnnn (Arlington WA)

Case VAC, 1950, with eagle hitch, sn 5451171. Front tires new, rears don't match but are about 90%, $800; Claire Berg nnn-nnn-nnnn or xxxx@xxxx.xxx (Randle WA)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10, 20 & 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 10, ran and worked well when last run several years ago. I can take pictures. If seriously interested and give a couple days’ notice, and I expect to be able to have it out for a test drive, $1800; Len Hoops nnn-nnn-nnnn or xxxx@xxxx.xxx (Estacada OR)

Caterpillar 10, sn PT 2413. Standard gauge, runs excellent, steers great, excellent undercarriage, nice tractor, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 15 wide gauge, 1930. Engine stuck, nice original, all 3 brass tags correct carb & belt pulley, $1425 cash firm; Bob nnn-nnn-nnnn (Rhododendron OR)

Caterpillar 28 with blade and live hydraulics. Side covers included. I've pushed dirt around with it and believe it to be in good shape. Gas tank is rusty. Haven't run it for several years. Can take pictures. $2500; Len Hoops nnn-nnn-nnnn or xxxx@xxxx.xxx (Estacada OR)

Caterpillar 30. Tail seat, good undercarriage. It has cracked water jackets which I discovered 25 years ago after buying it and getting it running. I've picked up 2 sets of good jugs (included), but have too many projects, $2000; Len Hoops nnn-nnn-nnnn or xxxx@xxxx.xxx (Estacada OR)

Caterpillar 35 Diesel 1933 wide gauge, sn 6E896. Good under carriage. Steering clutch is good. Engine stuck. Starting motor is off and in pieces, $1000; Mike Cristler nnn-nnn-nnnn or xxxx@xxxx.xxx (Zamora CA)

Caterpillar 6 cable blade; C. Wallace nnn-nnn-nnnn (Toldeo WA)

Caterpillar blade for D2 crawler or the like, $450; Bob nnn-nnn-nnnn (Eagle Point OR) [link to photo]

Caterpillar D2 5U 15600 DE start, 3490 original hours, 540 PTO, rock guards, all original, very nice, one of a kind $9,500; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D4, 7U16736, 9' angle, winch, (Hyster d4n), 65% undercarriage. Engines run very good. Can send pics on request + manuals, $6000 obo; Bryan Rudow nnn-nnn-nnnn or xxxx@xxxx.xxx (Lake Co CA)

Caterpillar D6-9U, hydraulic blade, winch, electric pony, Johnson bar, $3500; Mert Griffin nnn-nnn-nnnn or Carroll nnn-nnn-nnnn (Gaston OR) [link to photo]

Caterpillar PTO unit, complete with control parts for D-2, $250; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Cletrac W, 1919, $5000; Buck Evans nnn-nnn-nnnn (Greenville IL)

Cockshutt 30, 1947, restored, $2650; Al Barkl nnn-nnn-nnnn (Elko NV)

Complete BeGe hyd. pump, controls and tank assembly w/PTO shaft for D-2 Cat for rear remotes, $500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Co-Op E-3, 1946, restored, $2850; Al Barkl nnn-nnn-nnnn (Elko NV)

Earthmaster C, 1948. Recent restoration, runs & looks great, very good tires. Ready to show, with parts book, very nice, $3400 obo; M Beld (after 6PM) nnn-nnn-nnnn (Lynden WA)

Ensign carbs for Cat 20, 30 and 60 all rebuilt. Ensign models AAE, AE, AEL, $450-$650. D2-D6 battery box covers with thumb screws $80 D2 engine side panels $195 per pair; BCE Farm nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 200 with manure loader, fast hitch plow, disc. and blade. Very nice tractor with new paint. 6V system and good tires. Wide front, $3500. Can email pictures; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Farmall 200, 1955, fast hitch, single front wheel, rubber is good, tin straight. Everything works as it should. Runs well, $2300; Dan Gerth nnn-nnn-nnnn (Oroville WA)

Farmall 560 diesel with wide front end. Will run, but in rough shape and tired. Needs 1 front wheel and tire to move, $750 obo; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

Farmall AV high crop, Complete with decent sheet metal, good wheels, fair tires, $1250. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or (Woodland CA)

Farmall Cub 1956 s/n 195077 rebuilt engine, fresh starter + gen., 6 volt system. has fresh paint and straight sheet metal. Parade or farm ready, $2000; Robert Bowman nnn-nnn-nnnn (Sheridan OR)

Farmall Cub w/hydraulics, lights, has sickle bar mower-good tires, excellent sheet metal. Runs great; ready for paint, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub with sickle bar mower, very straight and clean, very good rubber, runs perfectly, $1850 obo; Don Chappell 503-679- 2726 (St Helens OR)

Farmall Cub with sickle mower, plow, cultivator and flat belt pulley, $1500; Jonathan Jude nnn-nnn-nnnn (Dorena OR)

Farmall Cub, bare bones, no hydro, no lift, dirty leaky carb should clean up pretty good. One new back tire, other rear tire good, fronts need to be changed (car tread); Chuck Kaufman nnn-nnn-nnnn (Hood River OR)

Farmall Cub, recent valve job, rebuilt mag, new rear tires, $2000; Mert Griffin nnn-nnn-nnnn or Carroll nnn-nnn-nnnn (Gaston OR) [link to photo]

Farmall Cub. Runs & looks good. Hydraulics with toolbar & cultivators, wheel weights. New front tires, $950; Ed Laudert nnn-nnn-nnnn (Washougal WA)

Farmall F-20, 1937, barn fresh, runs good, French & Hecht rear wheels, $1500; Sam Turley nnn-nnn-nnnn or xxxx@xxxx.xxx (Clyde Park MT)

Farmall H, 1940, ran when parked, good parts, etc, $650; Sam Turley nnn-nnn-nnnn or xxxx@xxxx.xxx (Clyde Park MT)

Farmall H, propane, tricycle, was running 2 years ago, $800; Norma Savell nnn-nnn-nnnn (San Bernadino CA)

Farmall M, good running. Just rebuilt the carb. Come and get it; Brian Tate nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

Farmall SM, 1953, with F-11 Farmhand, $2500; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall SMTA, 1954, restored, new rubber, PS, $6500; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall SMTA, runs good, TA works, good serial number, good sheet metal, live PTO, factory wide front, 13.6-38 rear rubber in good condition, fast hitch. Has correct casting code letters, $4500; Merf Hixson 951 526 4103 (Hemet CA)

Farmall Super A, 1952, sn 325567, C-123 engine. Starts and runs good. Very good sheet metal (almost perfect grille). Front tires new, rear tires about 60-70%. Wheel weights front and rear. Dual Touch Control hydraulic lift system. Has both belt pulley and PTO. New battery, coil, sediment bowl and professionally rebuilt carb (Burrey Carb). Headlights and mountings included (not installed) and needs work on electrical/charging systems. Comes with operators’ manual and parts book. Could be a show tractor with finish paint and decals. $1,950 obo; James Bingman nnn-nnn-nnnn (Bremerton WA) [link to photo]

Farmall Super C rear end, trans, & axles, 1953, $200; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super H, 1954, restored, $5500; Al Barkl nnn-nnn-nnnn (Elko NV)

Ferguson 30. Needs rear wheels. Engine turns over, has a good loader front , hydraulic bucket & lift. Tires are old but look good, $750; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn (Chehalis WA)

Ferguson F-35. Six speed, overhead valves, $3150; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ferguson older tractor hood, top opening and side panels, $225; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ferguson T-30. Restored. Tires and paint in excellent condition, 3 speed, $3000; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ferguson TO-30 (?), was running when parked 2 years ago, $1500; Norma Savell nnn-nnn-nnnn (San Bernadino CA)

Ford 2N, runs great, is equipped with Ferguson mower (bar missing). Has headlights and worn but useable tires, straight tin. Photos available. $800; Bud Tuttle nnn-nnn-nnnn (Solano Co CA)

Ford 600 has good tires and the original paint is in good shape, $3100; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 8N (late style) engine complete with side mount distributor, $500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N parts: Seat, battery platform, manifold, water pump and fan, side mount distributor, and fender mount tool box. Any part $25 or buy all for $125; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Ford 8N with Sherman $1,600; Brian Tate nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

Ford 8N, 1950, side distributor, factory tach, recent restoration, runs & looks like new. Has new tires & front bumper, new headlights & tail light, belt pulley. Ready to show, very nice, $3150 obo; M Beld (after 6PM) nnn-nnn-nnnn (Lynden WA)

Ford 8N, as is. Metal is good. Runs, with a manure loader, $2000, leave message; nnn-nnn-nnnn (Centralia WA)

Ford 8N, sn 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original) Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N, with Howard 2-speed differential attachment. Tractor has headlights and runs but overheats. Photos available. $800; Bud Tuttle nnn-nnn-nnnn (Solano Co CA)

Ford 8N. Excellent paint and rear tires, automotive front tires, $2900; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 8N-9N front wheels with tires, $100; Warren Harger nnn-nnn-nnnn (Central Point OR)

Ford 901 has good tires, paint is good, front loader, power steering, 5 speed, $4900; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 9N & 2N can be restored or parts, $1000 obo, donate money to 4H Building Fund; Rudy nnn-nnn-nnnn or nnn-nnn-nnnn (Tillamook OR)

Ford 9N, 1940, sn 237460, one of a kind. Kept in dry storage, very little use, no rust or dents, blue & white, original lights front & rear, seat, hour meter, Sherman 2-speed overdrive, 95% 12.4x28 on 10" rims, grille guard, foot boards, new 7.5Lx15 tri-ribs, original hubs, OR clutch, HD 6 volt, new ignition, $3750; Iver nnn-nnn-nnnn (Vancouver WA)

Ford Golden Jubilee, runs well. Has nice Nason full-thane paint that was applied in 2009. Shines really nice. Changed to 12 volt with alternator, and all new wiring. Front tires do not match. Rear tires are 50%. Many added features, remote hydraulics, adjustable front axle, power steering, and original grease gun holder on the left fender. Has been stored in a barn since it was painted in 2009. $3500 obo; Mike Cristler nnn-nnn-nnnn (Zamora CA)

Ford N series parts, rebuildable engines; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford tractor parts: 172 cu. in. gasoline engines, one new rebuild, zero hours, $2000; one strong running take out, $675; one Industrial engine out of swather, $350; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Ford/Funk 6 cylinder. I think it is about a 1948. It works good and looks good. I can email pictures, $3,200 obo; Brian Tate nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

Fordson Dexta, 1958, with 3 cylinder diesel. Works good and looks pretty good. I can email pictures. $2,800 obo; Brian Tate nnn-nnn-nnnn (Redmond WA)

Fordson F, 1920, with mounted 16” plow, runs, looks & drives good, has front mount buzz saw frame & belt pulley, some extra parts. Wheels banded for parades, $3600; E Phillips nnn-nnn-nnnn (Coquille OR) [link to photo] (was in May issue)

Fordson: 1927 English Fordson. Engine is stuck, fuel tank & radiator are good. Shows signs of original orange paint. Has a magneto & governor. This tractor last ran about 5-6 years ago, $475; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn (Chehalis WA)

Front axle w/spoke wheels for early John Deere D, $500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Gambles Farmcrest 30, restored, $2750; Al Barkl nnn-nnn-nnnn (Elko NV)

Hydraulic diverter valve off Ford model 3000, $50; Alan Forrette nnn-nnn-nnnn (Stayton OR)

Hydraulic pump with drive shaft assembly off of Ford model 3930. Mounting plate and coupler included, like new, $250; Alan Forrette nnn-nnn-nnnn (Stayton OR)

International 3514 Industrial front end loader with 4 cylinder diesel with 0 hours since rebuild. This tractor was bought new by a Port district and used to mow grass. PTO and three point, one yard bucket, ROPS all in very good condition. Original hours on machine is 882 hours, per hour meter. Rear rims and tubes new. Machine has power steering and is ideal machine for a bark yard, top soil loading, gravel, sand or manure loading. Machine has never been used for manure loading and not rusted out. This is a very heavy lift front loader and entire machine is guarded with sheet steel. All fluids and filters have been changed at a cost of $600. The radiator rebuilt same time as engine for $1000. This machine shows very little use as hour meter indicates. Bottom of bucket has heavy welding for yard blacktop or concrete scrape. No hydraulic oil or engine oil leaks. Transmission is 5 speed with forward/reverse shuttle. Price FOB Olympia is $8500; David Pearsall nnn-nnn-nnnn (special note owner very hard of hearing

) or email to xxxx@xxxx.xxx (Olympia WA) [link to photo]

International crawler tractor with adjustable blade, runs good, $1800 email for pictures; Michael Engstrom nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR)

International Harvester T20 crawler tractor. Does not run, has a hole in the block. Parts tractor or restoration. Weighs 7100# as is. Pretty complete. Can email pictures. Can assist in loading, $899; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

John Deere 420, 430, 440, 1010 pto M 2915t, 1010 pto extension t15468t; Ralph Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Wolf Creek OR)

John Deere 420T, Fully restored, runs and looks great, good tires, working hydraulics, pto, and three point. $4200. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or (Woodland CA)

John Deere 50. Low serial number first year. Motor gone through, tractor is partially dis assembled. Call for price; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere 520, runs good. 3 pt hitch, narrow front; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 60. Good runner. Decent sheet metal, $1500; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere 720 diesel standard, 1958, completely restored, new rubber, many new parts. Needs nothing. Runs and looks as good as new like new, $16,000; Myron nnn-nnn-nnnn (Richland WA) [link to photo]

John Deere A, 1945. Long hood / slant dash. Motor rebuilt with NOS .045 oversized pistons. New front tires, nice rear tires. Stored inside, needs restoration, $2000; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere A, NOS clutch pulley, $300; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere AN 1938, sn 480335, restored to like-new condition. Single front new tire 9.00 x 10, diamond tread 42” rear tires & new rear rims. Very good runner, hand crank, starts easy. 3-point. $3500; Jerry Lane 360 600-3158 (La Center WA)

John Deere AO Streamline tractor, only 824 made, running and unrestored, $7500. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or (Woodland CA)

John Deere AO, 1945. New front tires, oversize rear 80% tread, hand start, rebuilt carb & mag. New radiator core, fenders & shutters. Clean, some paint, $2750 obo; Bob nnn-nnn-nnnn (Independence OR)

John Deere AO's, have two, 1 electric start, 1 hand start. Have been in covered storage for years, not stuck, on good rubber, $2500 each or both for $4500; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)

John Deere AR/AO rear wheels/tires(13.6/26), $400 for the pair. Goodyear 13.6/26 4 ply tire/tube, solid, $150. Will be at the Brooks Swap Meet; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere AW High Clearance, 1948. 42" rear wheels. Engine was rebuild with .045 oversized pistons. Used to ted hay for a season. Unrestored, nice running tractor. Call to discuss price; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere AW, BW, 50W, 5 tractors all with round tube wide front ends, various conditions, $1000-$2700. Email for photos.

John Deere B complete but stuck has electric start, $1000 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1943, on steel wheels. Tip Toe rear wheels with lugs. Front round spoked wheels with extensions. War time tractor with no 5th or 6th gear. Original nice running tractor, $3500; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere B, 1946? Runs, drives, electric start, lights, very good sheet metal, rear tires old and checked, one needs section but both have good tread. Very easy restorable tractor, $1250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1947. 42" rear wheels, 16" single front. High Clearance model. Older restoration. Stored inside but has not run for a while, $1600; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere B, 1950, tricycle front, good paint, very good condition, $1595; Al Norwood nnn-nnn-nnnn or nnn-nnn-nnnn (Indio CA)

John Deere B. Good sheet metal, good paint, needs rear tire, wide front end, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere BN, 1943, new rubber rear flat spoke cutoffs, (nice) power-lift works, runs fine, good tin, $1400; Bud Davis nnn-nnn-nnnn (Arlington WA)

John Deere BNH, 1947, with spoked 40 inch rear wheels and spoke front wheel. Only 448 styled BNH's made, complete, stuck, needs tires, $3900. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or (Woodland CA)

John Deere BW with loader. 1946. running original tractor. Ant-eater style front end. new front tires, rears hold air but badly weathered. Call to discuss price; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere D, 1926, sn 42737. Nut and bolt restoration 10 years ago. Spent the last 9 years in the John Deere show room in Dixon Ca. New finders, gas tank, valves, rings, radiator, air cleaner, clutch and throw out bearing. Was bored 0.090 over in 1937. Was re-sleeved to 0.090. Do not have the bands and cleats. Currently has rubber road bands. $10,000; Wayne Percival nnn-nnn-nnnn (Dixon CA)

John Deere D, 1947, sn 149782. Styled. Tires and metal good. Was running but my arthritis I can’t roll it over for a while. Small, small dent in one fender but was restored 10yrs ago. $3500 obo; Dean Yankee nnn-nnn-nnnn (Battleground WA)

John Deere D's 1937 and 1938 I believe, two unstyled. One on steel one on rubber. Make 1 out of 2. $2200; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere Early AO/AR rear steel wheels with lugs and extensions. Found in a barn, probably never installed on a tractor. Make offer; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere G, 1947. Nice running original tractor. Early 47, so not battery box under the seat, $2500; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA) –

John Deere G, 1951. Working tractor with 800 series 3 point, good rear rubber, single front wheel. Wide front and/or R-O-M available, $2500; Merf Hixson nnn-nnn-nnnn (Hemet CA)

John Deere H, 1940. Hand start, restored. New Firestone Field & Road rear tires and tubes. Looks good, starts easy, $3195; John Johnston nnn-nnn-nnnn (Medford OR)

John Deere H, 1941, flywheel start, runs & starts good, strong mag, carb rebuilt, new tires front & rear, new clutch, steering worm, brakes, axle bearings & seals, no calcium in tires. Price firm $3500; Vaughn Parker nnn-nnn-nnnn (Bellevue WA)

John Deere H, 1945, tricycle front, very good condition, new paint, $1895; Al Norwood nnn-nnn-nnnn or nnn-nnn-nnnn (Indio CA)

John Deere H, 1946, electric start, restored, very nice, $4250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere H, electric start, runs good, $3970; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere HN hand start. New rear tires, older restoration. Call and we can discuss a price; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere L engine, electric start, clutch, (needs front cylinder sleeved), $200; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere LA, 1944, running condition, ready for restoration. Excellent sheet metal, $2000 obo; Patrick Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA) [link to photo]

John Deere LA, restored. Electric start belt pulley, good tires, very nice, $3700 obo or trade for 1946 John Deere H electric start tractor; M Beld (after 6PM) nnn-nnn-nnnn (Lynden WA)

John Deere Lindeman Crawler, excellent condition, runs, hand start, good tracks. No blade. Sn 336407, no blade, $9800 or offer. Call after 3pm; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere M, have two. 1949. Ran when parked. Have 1 sickle mower, 2 plows, 1 cover crop disk, 1 spring tooth, 1 digger spring tooth, $5000 obo; Wallace Lewis nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Oregon City OR)

John Deere M, runs, needs seat on good rubber, $1400; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)

John Deere M-40 radiator, repaired? checked, $100. M fenders, $35 each. M front wheel weights, heavy, for cast wheels, $100 pair. Will be at Brooks Swap Meet.; Larry Schwarz nnn-nnn-nnnn or

xxxx@xxxx.xxx (Centralia WA)

John Deere MC-40C 420C final drive parts, cases, bull/pinion gears, rollers, etc. Much more, call. Will be at Brooks Swap Meet; Larry Schwarz nnn-nnn-nnnn (Centralia WA)

John Deere MO or MU: complete kit to lower your M tractor into an orchard or utility tractor, $500. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or (Woodland CA)

John Deere MT, restored. Runs & looks like new, very nice, new tires & lights. $2500 obo or trade for 1946 John Deere H electric start tractor; M Beld (after 6PM) nnn-nnn-nnnn (Lynden WA)

John Deere R, 1954 (last year) both motors run good, good tires, original pain, reduced to $4000; Bill nnn-nnn-nnnn or cell nnn-nnn-nnnn (Tangent OR)

John Deere R, 1954, with 23.1 x 26 rears, tires are all good and both engines run good. It has fender extensions and comes with the correct hydraulic cylinder. Tractor is in its working clothes (original paint) and is in nice shape. I have moved to the big city and am motivated to sell, price is now only $3000 and is a real steal at this price; Bill nnn-nnn-nnnn (Tigard OR)

Massey Harris 44, 1949. Tin pretty good with very light surface rust, $750; Warren Harger 54-261-3168 (Central Point OR)

McCormick Deering 1929 model 20 TracTractor and 1935 orchard T-20. Both unpainted but engines & drives rebuilt. Some spare parts for both types; Bob Peterson nnn-nnn-nnnn (Hollister CA)

McCormick Deering 22-36 on rubber. Runs well, looks good, ready to restore, $1950 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

McCormick Deering T-20 tractractor, sn ST1530, 1931-32? very straight, will run & drives, $2500; Warren Hetterly nnn-nnn-nnnn (Lynden WA)

McCormick Deering W30, 1936, sn WB11052E. Running. Straight tin, rebuilt magneto, refurbished fuel tank. New exhaust and intake manifold, new front rubber. Spoked front wheels. 50% rear rubber, $1800; Duane Friend nnn-nnn-nnnn or xxxx@xxxx.xxx (Zillah WA)

McCormick Farmall F-14, 1937. On full steel. Older restoration. Still has the original steering brakes set- up. Has rear PTO and belt pulley. Stored inside. Ran when parked. There are not very many of the 1937 F-14's around. $1250 obo; Jim nnn-nnn-nnnn or Ray nnn-nnn-nnnn or xxxx@xxxx.xxx. Please no calls after 8:00 pm. (Olympia WA)

McCormick IH O4, runs great, has good rubber and wheels, hood and grill are good, needs rest of orchard metal, $1100; Bud Davis nnn-nnn-nnnn (Arlington WA)

Minneapolis Moline 1956 UTS special. Full fender big tractor, no rust outs, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)

Minneapolis Moline. Runs. Resse loader. Hydraulics work, $1100 obo; Stuart Carrico nnn-nnn-nnnn (Prospect OR) [link to photo]

Oliver 60 Industrial, 1947, very rare tractor. Runs great, tires are good always been stored inside. Needs some brake work. NO rust. $2000 obo; Tim Bollinger nnn-nnn-nnnn (Kenmore WA)

Oliver 80, have 2 parts tractors, $350 each obo; Sam Turley nnn-nnn-nnnn or xxxx@xxxx.xxx (Clyde Park MT)

Oliver HG 68 wide track crawler. Rebuild mag. Starts, runs and steers good. Has a blade. Very desirable and collectible, $1750 obo; Jim Beeler nnn-nnn-nnnn (Tacoma WA)

Oliver OC3 crawler, 1959, for sale or parting out; Rick & Tery Bodette nnn-nnn-nnnn (Olympia WA) [link to photo]

Parting out: Monarch 35; Minnie M5 diesel; Massey 65; Buck Evans nnn-nnn-nnnn (Greenville IL)

Power steering kit for a Ford model 4000 or 5000 tractor. Brand new (still in the crate). Paid over $600, will sell for $295; Alan Forrette nnn-nnn-nnnn (Stayton OR)

Rare single wheel tricycle front end off of model 6000 Ford tractor. Not many single wheel tractors produced. Very good condition, $395 obo; Alan Forrette nnn-nnn-nnnn (Stayton OR)

Rim: John Deere 34” rear rim off of 3020, $75; Buck Evans nnn-nnn-nnnn (Greenville IL)

Schramm Pneumatractor OUHB, 1972. Six cylinder gas ˝ engine ˝ compressor, 160 CFM @ 100 PSI. Complete, runs, but needs TLC. Rear tires excellent, front poor, $2,500 obo, will consider trade. Greg nnn-nnn-nnnn or xxxx@xxxx.xxx for information & pictures. (Lakeport CA) [link to photo]

Tires with tubes and wheels: one set 13.6X 28 on spin out rims, $275; one set 9.5 X 36 with or without 9N centers, $300; one set 13.6 X 28 with or without 8N centers, $325; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Tires: 6 hole 28" rim with tire, fits N series tractor, 11x28 tire. 8 hole 13"x24" rim, possible Kabota tractor; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Tires: two 6ply 950x16 tires and wheels for front of four wheel drive tractor. Tires are at least 50%. No cuts or weather checking; Robert C Pierce nnn-nnn-nnnn (Omak WA)

Topeka Highway Mower tractor (needs 162 Continental engine), 4x4, sideboom mower (rotary), $1000 or trades; Buck Evans nnn-nnn-nnnn (Greenville IL)

Tractor tires: two 14.9x24 tires & wheels, tires are 90%, $450; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Tractors, parting out: Minneapolis Moline M-5 diesel. Massey 65; Allis Chalmers Monarch 35 or “K”; Caterpillar 10, 30, 20. New old stock John Deere A clutch pulley, $300; Buck Evans nnn-nnn-nnnn (Greenville IL)

Tractors: John Deere AR, 1934, restorable. 1929 D semi-restored, have steel wheels rears. Farmall, F14, nice complete tractor and also parts tractor; O-4, complete should run; T-20, complete. John Deere A & B, have 8, some restorable, early 1940-50's. Case SC narrow front, S wide front, Case 310 crawler loader bucket, 580 backhoe. Fordson yard art, very early model, vented radiator. Oliver 77 narrow front, should run; C. Wallace nnn-nnn-nnnn (Toldeo WA)

Used parts for Styled John Deere D; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or (Woodland CA)

Weight: Original front triangular weight off of 1951 Allis Chalmers G cultivating tractor, $600; Alan Forrette nnn-nnn-nnnn (Stayton OR)

Weights: eight tractor suitcase weights, $100 for all; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Wheel weights: Large Minnie rear wheel weights, $200. Case V rear wheel weights, $200. David Bradley, $100. Minnie 4-star front weight bracket, $100. Front weights, $50 each; Buck Evans nnn-nnn-nnnn (Greenville IL)

Wheels: 3 industrial front wheels w/hard rubber and cast centers for Case L or LA, $100 each or 3 for $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Wheels: Two 18.4x26 10-ply turf JD wheels, $480; one 14.9x26 6-ply RI 90% WC, $240; two 14.9x26 6-ply turf,80% FS, $600; one 18.4x26 10 ply steel skidder, 60%, $400; two 18.4x26 6-ply FS 90% RI Kubota, $600; two 13.6x16 turf 75% WC, $240; two 11.2x16L 6-ply new T&W, $320; two 6x14RI, 1 new, 1 used wheels, $200; 2 6x12RI, 1 new, 1 used wheels, $200; Iver nnn-nnn-nnnn (Vancouver WA)

Will the person with the 50 John Deere tractors that I bought 2 carbs from, please call me at nnn-nnn-nnnn or drop me a note of your phone number so we can talk again. Thanks so much; J Paul Burkert, 32375 S Burkert Rd, Woodburn OR 97071

Windolph mini-dozer, model C. Built in Portland OR around 1950. 2 Cylinder Wisconsin engine, hydraulic blade, with Windolph roto-tiller-included, but not attached. Runs well, but still needs some work, $1950; Mike Heinlein nnn-nnn-nnnn or xxxx@xxxx.xxx (El Dorado CA)