September 2013 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B tractors, have 2, 1 with sic. mower, 1 with plow, All Crop 50 comb. with engine, all need engine work, restored, I have 1 good engine and misc. parts; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)

Allis Chalmers D12, with sickle bar mower, ready for collector to restore; Jerry nnn-nnn-nnnn (Gaston OR)

Allis Chalmers M, 1934. Honed cylinders, ground valves, replaced final drive main bearing, 15 inch track pads approx 60%. sand blasted and painted, $3200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers M, 1937. New steering clutch discs, valves ground, honed cylinders, sand blasted, painted. Good undercarriage, $3750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers model B, 1942, restorable, with 2 good tires to be included, $300; Philip S. Robustellini nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Montague CA)

Allis Chalmers WD, 1952, restored, new tires, with hand clutch, 2 pt, live pto, $2500 or offer; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastopol CA)

Allis Chalmers WM wide gauge, electric start, F/M magneto 7-26-1940, $1200 obo; Stan nnn-nnn-nnnn (Gardnerville NV)

Allis Chalmers, 1949. Rebuilt engine and starter, gen 6 volt system, 95% tires, has hydraulics, straight sheet metal with fresh paint, $1800 obo; Robert Bowman nnn-nnn-nnnn (Sheridan OR)

American Fordson tractor parts including really nice fenders, $450 pr obo, rare drag line double drum winch fits the American Fordson tractor, $650; Don Decker nnn-nnn-nnnn (Ridgecrest CA)

Axle shafts, complete set of steel wheels front and back with lugs for 10-20 or 15-30 tractor; Jerry nnn-nnn-nnnn (Gaston OR)

Brake band, new, for John Deere 420 or 440 crawler, $100. Rear belly pan for same, $100; JH Keith nnn-nnn-nnnn (Hermiston OR)

Case 125 4-cylinder air-cooled engines. I have 2. One stuck off combine, $250. One off Swather (not stuck), $400; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

Case 188 diesel rebuilt fuel pump & 4 injectors (non-pencil type), $800; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

Case 400, 1959. Freeman loader, hydraulics, Case-o-matic, $2500, interesting trade may be possible; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case 431, 1962 project tractor, 188 diesel. Rebuilt head, new water pumps, internal coolant leak in block. Optimal power steering, good front tires, good rear tires (about 85%), $750; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

Case C, parting out, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, 1929, complete and stuck on cut downs to rubber has rare flat belt water pump, $650 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, 1929, on steel, flat belt water pump, recent restoration job. Runs good, nice orig. tractor; $2200; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case C, S or R F&H hc245 Rear round spoke wheels 9x24 very nice and rare $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case CC, 1938 tricycle, runs good original cond. Tires OK. Hard to find this one, $2500; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case DI parts: cast iron grill, manifold, radiator (like new), etc. Call for prices & details; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastopol CA)

Case L, 1938, runs good, $5000; Lew nnn-nnn-nnnn or nnn-nnn-nnnn (Brush Prairie WA) [link to photo]

Case LA, 1947, new tires, very orig. Has flat lens headlights, runs good. This is a nice tractor to restore, $2200 (about the price of the tires); Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case RC, 1936, recent restoration, new tires, paint. Runs and looks good, $2200; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case RC, 1936. Have two. One is single wheel, loose & good spark. The other is narrow front & stuck. $500 for both; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Case RC, 1939, has all new tires, sunburst grill & fenders, older restoration, $2750; Dave Itel nnn-nnn-nnnn (Aurora OR)

Case S, 1941. Have two with deep dish fenders, one has good tires, $500 for the pair; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Case S, sn4713xxx, older paint, tires 90%, runs good, can email photo, $1200; Jack Maki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Case SC, 1953. Good metal, paint oxidized, $1900, trade?; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case SO, 1950, runs, needs restoration. Decent tires. Older restoration, asking $1100; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastopol CA)

Case VA series parts, many, call with needs; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

Case VAO, 1946, 3 pt hitch, runs good, decent sheet metal & tires, $1000; Ray Gossett nnn-nnn-nnnn (Hermiston OR)

Cat Pony motor magneto. Made by Bosch for Cat. MJK-4/2360-D 409, sn3A 400464. Fuel tank cap, 4 3/4" x 12 threads, casting #481451. Best Offer. Lynn nnn-nnn-nnnn (Philomath OR)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10, sn PT 2413. Standard gauge, runs excellent, steers great, excellent undercarriage, nice tractor, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 15 wide gauge, 1930. Engine stuck, nice original, all 3 brass tags correct carb & belt pulley, $1425 cash firm; Bob nnn-nnn-nnnn (Rhododendron OR)

Caterpillar D2 5J series with La Plant-Chaote hyd. blade, running pony motor and diesel. New seat, mostly complete except track adj. covers, $2000; Dave Jorgensen nnn-nnn-nnnn (Oak Harbor WA) [link to photo]

Caterpillar D2 dozer blade, brush rake, Hyster winch, sn5u. Very clean machine, all new under carriage rollers sprockets idlers pivot shaft rams pony motor, etc. Machine has a house on it. Killifer 8 ft disk goes with it, and a few more extras - grease pumps, some extra rigging. Can send pics if interested $11000 obo; Gary Goulart nnn-nnn-nnnn or xxxx@xxxx.xxx (Citrus Heights CA)

Caterpillar D2 track adjuster covers new $450 pair; BCE Farm nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D2 with blade. Call for details; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar parts: Small pallet of misc Caterpillar parts. Hoping to find a collector that will have a better use for these than me. Best guess at application -check your casting numbers: D6 2-speed Starter clutch, gear case and pinion. Looks good. Casting 5F9465. Pinion looks like it would fit other Pony starters - even D2, $50. Old D8? Water pump with drive gear. Casting 4B1699, $25. A few pony engine carbs, sediment bowls and gas tanks. You can take the whole pallet for $75; Tony Zabinski nnn-nnn-nnnn (Lyle WA)

Caterpillar Thirty top seat tractor, stuck but clean and straight, nearly complete including carburetor, has a nice history; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Centaur Tractor 2-G, 1929. Frame is 1927, engine and transmission are 1929. Previous owner wanted to increase the hp to run a large water pump in working a gold placer sluice operation. Tractor runs well and a lot of fun to drive. $2800 obo. For more information or pictures, call; Terry Christner nnn-nnn-nnnn (Molalla OR)

Cletrac 25 crawler, 1934. Hercules JXC 6 cylinder engine stuck, 98% complete (missing governor linkage), undercarriage in good condition, a great restoration project. Reducing my inventory to make room for my latest purchase(s), $1,800 obo or trade? Photos available; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Lakeport CA) [link to photo]

Cletrac AD, 1936. Fuel system worked on. Valves ground, starter overhauled, hydraulic dozer. Sand blasted and painted. Good undercarriage, $3800 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1937. Fuel injection system overhauled, valves ground, brake bands relined. Starter overhauled. Sandblasted and painted. Good undercarriage, $3000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cockshutt 30, 1947, restored, $2500; Al Barkl nnn-nnn-nnnn (Elko NV)

Complete adjustable wide front end assembly to fit John Deere MT, 40T, 420T, 430T tractors. $1000. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

Complete BeGe hyd. pump, controls and tank assembly w/PTO shaft for D-2 Cat for rear remotes, $500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Co-op E3, 1946, restored, $2700; Al Barkl nnn-nnn-nnnn (Elko NV)

Cub Cadet Hydro 147, $200; Al Barkl nnn-nnn-nnnn (Elko NV)

Early double drum LeTourneau control unit for Caterpillar Sixty, $450 obo; Other Sixty and Thirty parts; Don Decker nnn-nnn-nnnn (Ridgecrest CA)

Ensign carbs for Cat 20, 30 and 60 all rebuilt. Ensign models AAE, AE, AEL $450-$650. D2-D6 battery box covers with thumb screws $80. D2 engine side panels $195 per pair; BCE Farm nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 300, wide front end, tin in good condition, tires good, runs very good. Needs painting. Dual hyd front & back, $2500; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [link to photo]

Farmall 350 side panels, center strip; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall AV high crop, Complete with decent sheet metal, good wheels, fair tires. $1250. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

Farmall B, 1941, show ready, $3500 obo. Will send pic via email; Mark nnn-nnn-nnnn (Oakdale CA)

Farmall Cub w/hydraulics, lights, has sickle bar mower-good tires, excellent sheet metal. Runs great; ready for paint, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub with full set of cultivators, runs well, and sickle bar mower; Jerry nnn-nnn-nnnn (Gaston OR)

Farmall Cub with sickle bar mower, very straight and clean, very good rubber, runs perfectly, $1850 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub, 1948, with grading/leveling blade, front and rear wheel weights, moldboard plow, hydraulics, flat belt pulley, PTO attachment, complete battery box, and plow adjustment lever. Runs good. Rear seal leaks, $1,100; Dave nnn-nnn-nnnn (Bothell WA)

Farmall Cub, 1950's, with Woods mower, runs. Health problems force sale; Cleo Philbrick nnn-nnn-nnnn (Nash OK)

Farmall Cub, 1956. Rebuilt engine and starter, gen 6 volt system, straight sheet metal with new paint, fair tires, comes with belly mount mower -disk/blade, has hydraulics, $1800 obo; Robert Bowman nnn-nnn-nnnn (Sheridan OR)

Farmall H, wide front end, good tires & tin. Used on farm to bale hay, runs very good, $2000; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [link to photo]

Farmall parts: Just received many Farmall Cub parts. Good to fair condition. Also have Cub sickle bar mower parts. Will trade some parts for Cub belt pulley; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall SM, 1953, with Farmhand loader, $2450; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super A, 1948, stuck, good rear tires, sheet metal very good, primed. All parts off tractor, take it all, $400; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastopol CA)

Farmall Super M, motor stuck, great project, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall tractors, have F12, B, C, WD-9. C & WD-9 both run good and are barn fresh; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)

Ferguson F-35. Six speed, overhead valves, $3150 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ferguson T-30. Restored. Tires and paint in excellent condition, 3 speed, $3000 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 3500 backhoe & loader. Good condition, no oil leaks. Good rubber, good radiator. Don't use motor oil. 3 cyl motor, $3850, will consider trade; Jack nnn-nnn-nnnn (Bonanza OR)

Ford 600 has good tires and the original paint is in good shape, $3100 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 600 motor tug, 1955, cab model, it runs great, comes with doors, $1,800; Mike nnn-nnn-nnnn (Buckley WA)

Ford 641 workhorse tractor, 1958. Complete original colors paint, good tires lots of new parts when repainting tractor, 48.4hp, $4500 obo, can deliver within 60 miles; Larry nnn-nnn-nnnn (Tangent OR)

Ford 8N (front distributor). Runs well. Hydraulics work, has a manure front loader. Metal is good. Needs a rear tires & rim. Tractor hasn't been used in last 10 years. Can be driven onto trailer, $2000 or offer; Bill nnn-nnn-nnnn or nnn-nnn-nnnn, lv msg (Centralia WA)

Ford 8N (late style) engine complete with side mount distributor, $500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N, 1949 rebuilt tractor, $3750; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, sn 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original) Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N. Excellent paint and rear tires, automotive front tires, $2900 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 8N-9N front wheels with tires $100; Warren Harger, nnn-nnn-nnnn (Central Point OR)

Ford 900 hydraulic parts, all working when removed from tractor: top cover, hyd. pump, 3-point lift arms, $600 for all; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Ford 901 has good tires, paint is good, front loader, power steering, 5 speed, $4900 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 9N, 1947, runs very good. Has loader, rear box scraper, rear hand-made HD blade, post hole auger, $2165 obo; Eric nnn-nnn-nnnn (John Day OR)

Ford 9N, 1950's, runs. Health problems force sale; Cleo Philbrick nnn-nnn-nnnn (Nash OK)

Ford 9N. Runs, some implements available, ready for collector to restore; Jerry nnn-nnn-nnnn (Gaston OR)

Ford tractor front wheel weights, early N series. Nice shape, $100; Irvin Baker nnn-nnn-nnnn (Ripon CA)

Ford tractor parts: 172 cu. in. gasoline engines, one new rebuild, zero hours, $2000; one strong running take out, $675; one Industrial engine out of swather, $350; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Ford wheels: 2 sets of 13.6x 28 tires on Ford 900 spinout wheels; one set unmatched 45degree tread $275; matched pair 23 degree, $500, one set of 9.5 x 36 with 2N centers would make nice High crop tractor; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Front axle w/spoke wheels for early John Deere D, $500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Gambles Farmcrest 30, 1948, restored, $2650; Al Barkl nnn-nnn-nnnn (Elko NV)

IHC T 20 crawler, 1936. Engine free, not running, no cracks or weld, new Ex/In manifold. $1,200 OBO or trade? Photos available; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Lakeport CA)

International 350 Hi-Utility Rare 800 built gas runs 2000 hrs. fast hitch 1 hyd. remote all lights, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 3514 Industrial front-end loader with 4-cylinder diesel 61-horsepower with 0 hours since rebuilt. Tractor was bought new by a port district and used to mow grass. PTO and 3-point hitch 1-yard bucket, ROPS in good condition. Rear rims and tubes new. Power steering, is ideal for a bark-yard, top soil loading, gravel, sand or manure loading. Bottom of bucket has heavy welding for blacktop yard or concrete scrape. Machine never used for manure loading and not rusted out. This is a very heavy lift front loader and entire machine is guarded with sheet steel. All fluids and filters have been changed at a cost of $600. Radiator rebuilt same time as engine. This machine shows very little use. No hydraulic oil or engine oil leaks. Transmission is 5-speed with forward/reverse shuttle. $6500; David Pearsall nnn-nnn-nnnn or lowerpugetsound@comcast. net (Olympia WA) [link to photo]

International Cub LO-Boy, 1957, with IH mod#1000 one-arm frontend loader sn 4440J, $3500 obo. Will send pic via email; Mark nnn-nnn-nnnn (Oakdale CA)

International Harvester, Farmall parts tractor, $250; Stan nnn-nnn-nnnn (Gardnerville NV)

International T-20 1936 crawler. Engine free, not running, no cracks or weld, new Ex/In manifold. $1,200 obo or trade?; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx for information & pictures. (Lakeport CA)

International T-9 gas crawler tractor with blade. Make offer. Located at Beaverton, Oregon; John nnn-nnn-nnnn or Hubert nnn-nnn-nnnn (Bend OR)

International TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 40 and M engines and many usable engine parts; Don Decker nnn-nnn-nnnn (Ridgecrest CA)

John Deere 400 ID (with a 2-53 Detroit Diesel engine), 1959. This is an industrial wheel tractor (similar to a 435). Engine runs strong. 16.9 X24 rear wheels 8 hole hubs, non-adjustable axle. Front axle industrial strength, adjustable. 5 speed transmission, $4500; Norm Keesler Nampa Idaho nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

John Deere 420T, Fully restored, runs and looks great, good tires, working hydraulics, pto, and three point. $4200. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

John Deere 440 crawler with Holt straight blade. 2 cyl. gas. New undercarriage. Canopy $4000; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 440 ID wheel tractor with front end loader and backhoe. One of the last 2 cyl built, sn459XXX, $5500 obo; Pat Boyle nnn-nnn-nnnn (Washougal WA)

John Deere 520 Row Crop, 3pt hitch, single front wheel, tin is good; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 60 parted out, lots left: crank, head, flywheel, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 720 diesel standard, 1958, completely restored, new rubber, many new parts. Needs nothing. Runs and looks as good as new like new, reduced to $14,500; Myron nnn-nnn-nnnn (Richland WA) [link to photo]

John Deere A Rollamatic front end, $200; rear hydraulics for JD A, whole cast rear end, pto, etc, $200; Roy Whipp nnn-nnn-nnnn (Phelan CA)

John Deere A Rollamatic front end, and rear hydraulics for JD A; Roy Whipp nnn-nnn-nnnn (Phelan CA)

John Deere AW, BW, 50W, 5 tractors all with round tube wide front ends, various conditions, $1000- $2700. Also available: separate round tube wide front ends, split pedestals for A and B, and individual front end parts. Email for photos. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

John Deere B complete but stuck has electric start, $1000 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B unstyled 37 parts tractor. No carb or mag, has 36 inch cast rears bad tires, $700; Frank 408 202-2810 (Morgan Hill CA)

John Deere B, 1937, restoration started, $1650; Dave Itel nnn-nnn-nnnn (Aurora OR)

John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1946? Runs, drives, electric start, lights, very good sheet metal, rear tires old and checked, one needs section but both have good tread. Very easy restorable tractor, $1250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1949, tricycle, runs fine, $1000. And for FREE, a nearly complete motor in parts for the same John Deere B tractor, and various 3pt hitch parts that could be made into a 3pt hitch for the B; Tom Butterfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Joseph OR)

John Deere B. Good sheet metal, good paint, needs rear tire, wide front end, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere BO, 1937. Older complete restoration, needs nothing, $5000 obo; Brian nnn-nnn-nnnn (Enumclaw WA)

John Deere BR, 1936, steel wheels, restored to like-new condition, $6000; John Shierman nnn-nnn-nnnn (Battle Ground WA)

John Deere BW High Clearance, 1948. Restored, runs great. Nice tractor, ready for parade or work. $6500; Mike Morgan nnn-nnn-nnnn (Onyx CA)

John Deere D 420U, wide front, 1957, sn 106102, restored. 4-speed, PTO. Runs, drives good. New tires front, 75% rear. Rear wheel weights, 3pt with correct 3rd link. 4yr. old paint with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all work receipts. With restored 415-A 3pt integral plow (2-14). New Tyler Buchheit points, extensions and trash boards. Bottoms and coulters are soft painted when not in use. Manuals and all paperwork. Great original set-up, $5500 obo. Pictures on request. Would use as part trade for restored JD 520 wide or narrow front; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

John Deere D, 1947. Runs good, starts easy with electric start, almost new tires, good sheet metal & paint $5,000; Mike nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingston WA) [link to photo]

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere H, 1939, narrow front, sn 5520. Runs great, looks good, $2500 obo. Will send pic via email; Mark nnn-nnn-nnnn (Oakdale CA)

John Deere H, 1946, electric start, restored, very nice, $4250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere H, electric start, runs good, $3970; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere Lindeman crawler frame, $400.00 offer Also have pads and other Lindeman parts. nnn-nnn-nnnn After 3PM; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere M, 1950, sn 19165. Original condition engine rebuilt, runs great, belt pulley, hydraulic lift, good tires, wheel weights, $2000; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere MT, 1949, sn 13916. Original condition engine rebuilt, runs good, single front wheel, tires good, PTO & hyd. lift, $2000; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere unstyled AO, hand start, complete with good 26 inch rear tires. Needs restoration, $1500. Also unstyled AO parts tractor available, $500; Frank 408 202-2810 (Morgan Hill CA)

Massey Ferguson 30 Industrial tractor with loader and 3 pt. hitch. No PTO with ROP enclosed cab. Perkins diesel and shuttle transmission, $3950; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Harris 101 Jr. Standard, runs, needs side panels, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 44, 1949. Tin pretty good with very light surface rust, $750; Warren Harger nnn-nnn-nnnn (Central Point OR)

Massey Harris 444 Gas standard, 1 finger power steering, live pto hydraulic remote, runs good, great sheet metal hard to find, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris, Massy Ferguson, New Holland, Ford, Mitsubishi, plus Misc. Manufacturers Parts Manuals & Display Racks, ALL ORIGINAL. Over 500 plus books (24,000 pages), 1960’s thru 1980. Whole collection for sale $2,500; Dave Holmstrom nnn-nnn-nnnn for a complimentary copy of inventory (Eden UT)

McCormick Deering 22-36 on rubber. Runs well, looks good, ready to restore, $1950 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

McCormick Deering I-4, have 2. One complete, turns over, good shape. Other is a parts tractor. Both for $1650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-14 orchard project found out doors, very complete, unit block is freeze cracked. I have an extra repaired block to go with it, $2200 or interesting trade; Chuck Kaufman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hood River OR)

McCormick Deering O-4. Runs, missing some orchard sheet metal, $1150; McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1800 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Minneapolis Moline 1956 UTS special. Full fender big tractor, no rust outs, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)

Minneapolis Moline U, 1949 (st). Fully restored with engine work, professionally painted, new rubber all around. Used in shows, parades, and fairs. Very nice, $4000; nnn-nnn-nnnn (Sequim WA)

Now available, Used parts for Styled John Deere Model D. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

Now available, Used parts for Unstyled B, BR, BO and Unstyled A, AR, AO. John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

Oliver 60 Row Crop 1941. Looks and runs well with new 6 volt battery and fresh engine oil/filter. 6 speed transmission. All tin is present and fits well along with fenders. Has radiator canvas, three lights, rear wheel weights and 1940s steering knob, $2350; Dave Pembroke nnn-nnn-nnnn pls lv message (Silverton OR)

Oliver 66, Wide Front, 1953. Older restoration. Nice tractor; runs great, $5000; Mike Morgan nnn-nnn-nnnn (Onyx CA)

Oliver 880, Industrial, 1961. Runs great. Would make a nice puller. Sold new to the State of California. $3000; Mike Morgan nnn-nnn-nnnn (Onyx CA)

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold, $8500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Albany OR)

Oliver Parts Manuals & Display Racks, ALL ORIGINAL, Tractors, Crawlers, Plows, Planters, etc. Over 500 plus books (24,000 pages), 1920’s thru 1960’s. Whole collection for sale $2,500. Collection has been appraised for $7,449 by the Floyd County Historical Society. Call Dave Holmstrom nnn-nnn-nnnn for a complimentary copy of inventory (Eden UT)

Oliver/Cletrac HG and OC3 parts. Undercarriages, engines, frames, transmissions, etc; Terry McFarlane nnn-nnn-nnnn (La Pine OR)

Paper surface belt pulleys, (3) and CAT/IH PTO drives for larger crawlers, possibly Cat 50, D7, or IH TD 14. Good condition, haven't been used for years. Sold the ranch and wanting to find a good home for these. The ranch was started in the 1940's and they were probably used to power early irrigation wells, grain elevator, etc. Email and we'll send you pictures and answer your questions, or talk to owner at phone number listed. We're in Central California but can deliver to the right place; Jerry Diefenderfer nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Margarita CA)

Rims: 2 rear rims for a Farmall 200, have not had chloride in them, no rust, $235; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Rumely Oil Pull 12-20, Model K, 1923. Excellent original condition, still has factory pin striping on wheels. Runs excellent. One of the nicest Rumelys that you will ever find, $32,500; Kurt Spegel nnn-nnn-nnnn (Cornelius OR)

Rumely Oil Pull W, lightweight. 20-30 hp, 1928. Rare, all original, good paint, runs good. In barn since restored. Ran at Calif. State Fair approx. 15 yrs. Asking $25,000; Wayne Percival nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR) [link to photo]

Super H, 1954, restored, $5400; Al Barkl nnn-nnn-nnnn (Elko NV)

Tires: two 9.5 X 24 rear tractor tires 45 degree 50% or better tread. Tires are not a matched set - on wheels that will fit a Model L John Deere, $400; Tom Butterfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Joseph OR)

Wheels/rims: one cast wheel for John Deere A, without rim, $150. One cast wheel with rim & weight, for 38" rim, $250; Roy Whipp nnn-nnn-nnnn (Phelan CA)

Wheels/rims: one wheel without a rim, $150. One wheel with rim & weight, for 38" rim, $250; Roy Whipp nnn-nnn-nnnn (Phelan CA)

Wheels: 3 industrial front wheels w/hard rubber and cast centers for Case L or LA, $100 each or 3 for $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Wheels: Farmall M steel rear wheels. Oliver rear steel wheels. Year unknown. Make offer; Del Hollingsworth nnn-nnn-nnnn (Albany OR)

Wheels: one 12 spline factor flat spoke wheel for John Deere B. One steel wheel for A John Deere with extension; Dave Itel nnn-nnn-nnnn (Aurora OR)