October 2013 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B and C parts. Partial C tractor with power train. Includes engine block, sickle mowers, mags, wheels, tires, too many parts to list. Best offer for the whole lot of goodies. Vintage Tractors of Willows. Albert nnn-nnn-nnnn or George nnn-nnn-nnnn (Willows CA)

Allis Chalmers B, 1939. Runs good, optional hydraulics and seat. No starter or lights, $1,250; Russ Shorten nnn-nnn-nnnn or cell nnn-nnn-nnnn (Dayton WA) [link to photo]

Allis Chalmers B, hand crank, hand brakes, fair tires, $1000; Merf Hixson nnn-nnn-nnnn (San Jacinto CA)

Allis Chalmers D12, with sickle bar mower, ready for collector to restore; Jerry nnn-nnn-nnnn (Gaston OR)

Allis Chalmers M, 1934. Honed cylinders, ground valves, replaced final drive main bearing, 15 inch track pads approx 60%. sand blasted and painted, $3200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers M, 1937. New steering clutch discs, valves ground, honed cylinders, sand blasted, painted. Good undercarriage, $3750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis-Chalmers Industrial Equipment Service Manual. Fuel injection data for tractors and combines, 122 pages. Service manual set for HD7G Tractor Shovel. Also some on HD-6,11,16,21. Manual in good condition except cover held on with duct tape. Interior clean and bright with a few fingerprints, 2-3/4" thick. $95 postpaid; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Avery A, 1948, single front wheel. Has original type Montgomery Ward tires on rear. TIres are in good condition. Nice non-restored tractor, runs great, $1500 obo; Mike's Tractor Ranch nnn-nnn-nnnn or nnn-nnn-nnnn (Scio OR)

Best 60, 1924, running condition, $18,500; Orman Haenggi nnn-nnn-nnnn (East Nicolaus CA) [link to photo]

Case 125 4-cylinder air-cooled engines. I have 2. One stuck off combine, $250. One off Swather (not stuck), $400; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

Case 188 diesel rebuilt fuel pump & 4 injectors (non-pencil type), $800; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

Case 400, 1959. Freeman loader, hydraulics, Case-o-matic, $2500, interesting trade may be possible; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case 431, 1962 project tractor, 188 diesel. Rebuilt head, new water pumps, internal coolant leak in block. Optimal power steering, good front tires, good rear tires (about 85%), $750; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

Case 530 with power steering, 3 pt & pto. Steers easy & is easy to get on & off. Works very good, $1400; Don Weburg nnn-nnn-nnnn (Arcata CA)

Case C, 1929, on steel, flat belt water pump, recent restoration job. Runs good, nice orig. tractor; $2200; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case CC, 1938 tricycle, runs good original cond. Tires OK. Hard to find this one, $2500; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case L, 1938, runs good, $5000; Lew nnn-nnn-nnnn or nnn-nnn-nnnn (Brush Prairie WA) [link to photo]

Case LA, 1947, new tires, very orig. Has flat lens headlights, runs good. This is a nice tractor to restore, $2200 (about the price of the tires); Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case RC, 1936, recent restoration, new tires, paint. Runs and looks good, $2200; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case SC, 1953. Good metal, paint oxidized, $1900, trade?; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case VA series parts, many, call with needs; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

Case VAO, 1946, 3 pt hitch, runs good, decent sheet metal & tires, $1000; Ray Gossett nnn-nnn-nnnn (Hermiston OR)

Cat Pony motor magneto. Made by Bosch for Cat. MJK-4/2360-D 409, sn3A 400464. Fuel tank cap, 4 3/4" x 12 threads, casting #481451. Best Offer. Lynn nnn-nnn-nnnn (Philomath OR)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10 engine only, long block with clutch assembly, good, $500; Bob nnn-nnn-nnnn (Sandy OR)

Caterpillar D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D-2. 5J series wide gauge tractor. Tractor runs good, needs a little injector work, have extra injectors. Undercarriage good, $2000; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D25U with 8 1/2 foot blade. Electric start on pony motor. Decent undercarriage and tracks. Main motor runs good and all brakes and steering clutches work good. Was clearing field but now pony motor won't start. Can email pictures, $2500 as is; Bob Stere nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95. Photos available by internet; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

Caterpillar parts: starting engine for D2 D4 in good condition with carburetor, mag & governor missing flywheel, $350 obo. Fuel pump, complete, for D4, $100. Fuel tank, fender mount, $50. Hoods, have 2, one for 7J, one for 7U, $50 ea. Air cleaner, $50; Don Weburg nnn-nnn-nnnn (Arcata CA)

Caterpillar twenty eight tractor. I have a topseat standard gauge Cat 28. Engine free, not running. It has manifolds and carb, but they are rough, but possibly useable. I have a new drop tube manifold part for it. Sheet metal is fair, undercarriage is fair, $2500; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar twenty parts tractor. I have a PL series twenty standard gauge tractor for parts. No manifolds, carb, or mag, $350; Kim Kestler nnn-nnn-nnnn (Reno NV)

Centaur Tractor 2-G, 1929. Frame is 1927, engine and transmission are 1929. Previous owner wanted to increase the hp to run a large water pump in working a gold placer sluice operation. Tractor runs well and a lot of fun to drive. $2800 obo. For more information or pictures, call; Terry Christner nnn-nnn-nnnn (Molalla OR)

Cletrac 20, 1934, runs great. Looks real good, $3,500; Sid nnn-nnn-nnnn (Everson WA)

Cletrac 25 crawler, 1934. Hercules JXC 6 cylinder engine stuck, 98% complete (missing governor linkage), undercarriage in good condition, a great restoration project. Reducing my inventory to make room for my latest purchase(s), $1,800 obo or trade? Photos available; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Lakeport CA) [link to photo]

Cletrac AD, 1936. Fuel system worked on. Valves ground, starter overhauled, hydraulic dozer. Sand blasted and painted. Good undercarriage, $3800 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1937. Fuel injection system overhauled, valves ground, brake bands relined. Starter overhauled. Sandblasted and painted. Good undercarriage, $3000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cockshutt 30, 1947, $2500; Al Barkl nnn-nnn-nnnn (Elko NV)

Cockshutt 30, 1957 older restoration, good rubber, new battery starts quick, runs strong; Stu Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)

Complete BeGe hyd. pump, controls and tank assembly w/PTO shaft for D-2 Cat for rear remotes, $500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Co-op E-3, 1946, $2700; Al Barkl nnn-nnn-nnnn (Elko NV)

Cub Cadet 1968 model 147 hydrostatics with 14 hp. Kohler engine, good mower deck, good rubber, always covered, no dings, $500 obo; Stu Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)

Cub Cadet Hydro 147, $200; Al Barkl nnn-nnn-nnnn (Elko NV)

Detroit Jr. belly mount mower for a Fordson F. This unit has a few older repairs, but is complete. A must have for the true Fordson collector. Open to offers and/or trades for something interesting; Jon Nessel nnn-nnn-nnnn (Chilliwack BC)

Ensign carbs for Cat 20, 30 and 60 all rebuilt. Ensign models AAE, AE, AEL $450-$650. D2-D6 battery box covers with thumb screws $80 D2 engine side panels $195 per pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 230, 1957, wide front tractor with attached rear blade, (sn 1287-J). Has 4 cylinder C123 gas engine and runs good. Was converted from 6 volt to 12 volt system. Tractor is in good original condition and runs good. These tractors were only built from 1956-58 with just over 7000 built. $2500 obo; Dan nnn-nnn-nnnn for details or to see, photos available (Sherwood OR)

Farmall 300, wide front end, tin in good condition, tires good, runs very good. Needs painting. Dual hyd front & back, $2500; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [link to photo]

Farmall 560 wide front. Tractor will run but it tired. Rear tires hold air but are ugly, $450 obo; Chris nnn-nnn-nnnn (Camano Island WA)

Farmall B, 1941, show ready, $3500 obo. Will send pic via email; Mark nnn-nnn-nnnn (Oakdale CA)

Farmall Cub needs a home, love & attention. Parked inside over twenty years. Engine rolls over nicely but no spark. Good tin. Hydraulics equipped. I need the space & don't have time for restoration. No implements. $900 cash; Mike nnn-nnn-nnnn (Puyallup WA)

Farmall Cub w/hydraulics, lights, has sickle bar mower-good tires, excellent sheet metal. Runs great; ready for paint, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub with full set of cultivators, runs well, and sickle bar mower; Jerry nnn-nnn-nnnn (Gaston OR)

Farmall Cub with sickle bar mower, very straight and clean, very good rubber, runs perfectly, $1850 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub, 1948, with grading/ leveling blade, front and rear wheel weights, moldboard plow, hydraulics, flat belt pulley, PTO attachment, complete battery box, and plow adjustment lever. Runs good. Rear seal leaks. $875 obo; Dave nnn-nnn-nnnn (Bothell WA)

Farmall Cub, 1950's, with Woods mower, runs. Health problems force sale; Cleo Philbrick nnn-nnn-nnnn (Nash OK)

Farmall H, 1944. Four new tires. Optional fenders, belt pulley, remote hydraulics, roller drawbar, lights, tool box. Excellent tractor for show, work or parade, $3,850; Russ Shorten nnn-nnn-nnnn or cell nnn-nnn-nnnn (Dayton WA) [link to photo]

Farmall H, wide front end, good tires & tin. Used on farm to bale hay, runs very good, $2000; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [link to photo]

Farmall items: Flipback seat hinge, $20. One paper pulley, 9-1/2", Farmall, $60. One paper pulley 13", Farmall, $85. One set Farmall H & M fenders with brackets, bolts. One Farmall H horseshoe drawback, $50. One fuel tank & stand, 250-300 gallon, $150. 1 F-ll loader, no bucket. 1 C-24 6ft fast hitch mower, SC Farmall. 1 one-bottom rollover plow for SC Farmall. 1 rear end & trans with axles 53 SC Farmall; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall parts: Just received many Farmall Cub parts. Good to fair condition. Also have Cub sickle bar mower parts. Will trade some parts for Cub belt pulley; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall SH, 1954, $5400; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall SM, 1953, with loader, $2450; Al Barkl nnn-nnn-nnnn (Elko NV)

Ferguson F-35. Six speed, overhead valves, $3150 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ferguson T-30. Restored. Tires and paint in excellent condition, 3 speed, $3000 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 3500 backhoe & loader. Good condition, no oil leaks. Good rubber, good radiator. Don't use motor oil. 3 cyl motor, $3850, will consider trade; Jack nnn-nnn-nnnn (Bonanza OR)

Ford 600 has good tires and the original paint is in good shape, $3100 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 8N (front distributor). Runs well. Hydraulics work, has a manure front loader. Metal is good. Needs a rear tires & rim. Tractor hasn't been used in last 10 years. Can be driven onto trailer, $2000 or offer; Bill nnn-nnn-nnnn or nnn-nnn-nnnn, lv msg (Centralia WA)

Ford 8N, 1949 rebuilt tractor, $3750; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, new rear alliance 11.2-28/10.28 tires, with excellent rims. Tractor runs good, needs repairs, call for details, $750; WF Henderson nnn-nnn-nnnn (Sheridan OR)

Ford 8N, sn 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original) Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N. Excellent paint and rear tires, automotive front tires, $2900 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 8N-9N front wheels with tires $100; Warren Harger, nnn-nnn-nnnn (Central Point OR)

Ford 900 hydraulic parts, all working when removed from tractor: top cover, hyd. pump, 3-point lift arms, $600 for all; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Ford 901 has good tires, paint is good, front loader, power steering, 5 speed, $4900 obo; David Gibson nnn-nnn-nnnn Lv msg (Morgan Hill CA)

Ford 9N, 1947, runs very good. Has loader, rear box scraper, rear hand-made HD blade, post hole auger, $2165 obo; Eric nnn-nnn-nnnn (John Day OR)

Ford 9N, 1950's, runs. Health problems force sale; Cleo Philbrick nnn-nnn-nnnn (Nash OK)

Ford 9N. Runs, some implements available, ready for collector to restore; Jerry nnn-nnn-nnnn (Gaston OR)

Ford tractor front wheel weights, early N series. Nice shape, $100; Irvin Baker nnn-nnn-nnnn (Ripon CA)

Ford tractor parts: 172 cu. in. gasoline engines, one new rebuild, zero hours, $2000. One strong running take out, $675. One Industrial engine out of swather, $350; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Ford wheels: 2 sets of 13.6x 28 tires on Ford 900 spinout wheels; one set unmatched 45degree tread $275; matched pair 23 degree, $500, one set of 9.5 x 36 with 2N centers would make nice High crop tractor; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Gambles Farmcrest 30, 1948, $2600; Al Barkl nnn-nnn-nnnn (Elko NV)

Hood for John Deere 50 or 520, $125; Dave Gallant nnn-nnn-nnnn (Boring OR)

IHC T 20 crawler, 1936. Engine free, not running, no cracks or weld, new Ex/In manifold. $1,200 OBO or trade? Photos available; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Lakeport CA)

International Cub LO-Boy, 1957, with IH mod#1000 one-arm frontend loader sn 4440J, $3500 obo. Will send pic via email; Mark nnn-nnn-nnnn (Oakdale CA)

International T-20 1936 crawler. Engine free, not running, no cracks or weld, new Ex/In manifold. $1,200 obo or trade?; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx for information & pictures. (Lakeport CA)

John Deere 1050 4wd tractor with loader, minus bucket. 3 cylinder turboed diesel engine, runs great. For parts or restore. Was low hours tractor. Burned in fuel tank fire. Transmission ruined. $800; Don Weburg nnn-nnn-nnnn (Arcata CA)

John Deere 40 C parts: Complete engine 20lbs oil pressure fan to clutch, $1000. JD 40 C complete final drive with steering clutches, used, $250 ea. JD 40 C tracks, like new, for 5 roller machine, $1000. JD 40 C sprockets, like new, $100 ea. JD 40 C bottom rollers, very good condition, $50 ea. JD 40 C front idlers, complete w/hams, $100 ea. JD 40 C belly pan, $50. JD 40 C hood, fair, $100. JD 40 C clean fuel tank, $500. JD 40 C rock guards for 5 roller frame, $100; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 400 ID (with a 2-53 Detroit Diesel engine), 1959. This is an industrial wheel tractor (similar to a 435). Engine runs strong. 16.9 X24 rear wheels 8 hole hubs, non-adjustable axle. Front axle industrial strength, adjustable. 5 speed transmission, $4500; Norm Keesler Nampa Idaho nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

John Deere 40T, 1953. Older restoration. New head. Has 3 point and lights. Nice tractor. Needs a little sheet metal work to be perfect; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere 440 crawler with bucket & rear ripper bar. 2 cylinder gas engine runs & steers good, $4000; Don Weburg nnn-nnn-nnnn (Arcata CA)

John Deere 50, 1953. Project tractor. Low serial number. Engine has been rebuilt, tractor will roll but is not completely assembled; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere 60, 1953. Unrestored, nice running tractor; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere 720 diesel standard, 1958, completely restored, new rubber, many new parts. Needs nothing. Runs and looks as good as new like new, reduced to $14,500; Myron nnn-nnn-nnnn (Richland WA) [link to photo]

John Deere 820, 1957. This is an excellent, unrestored original tractor. Pup start and diesel engine run great. Drives good. New front tires. Restore or leave it as is. $7900 obo and/or trade for something interesting; Jon Nessel nnn-nnn-nnnn (Chilliwack BC)

John Deere A Rollamatic front end, $200; rear hydraulics for JD A, whole cast rear end, pto, etc, $200; Roy Whipp nnn-nnn-nnnn (Phelan CA)

John Deere A, 1945. New front tires, 80% rear tires. Engine rebuilt. Unrestored; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere A's, have three 1950. Make 2 good tractors out of 3 tractors worth of parts; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere AW High Clearance, 1948. Nice unrestored tractor. Engine rebuilt. 42" rear tires and wheels with round axle housing; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B High Clearance, 1947. Older restoration. 42" rear tires, single front; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B unstyled 37 parts tractor. No carb or mag, has 36 inch cast rears bad tires, $700; Frank 408 202-2810 (Morgan Hill CA)

John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1942, on steel wheels with front extension rims. Unrestored original running tractor; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B, 1949, tricycle, runs fine, $1000. And for FREE, a nearly complete motor in parts for the same John Deere B tractor, and various 3pt hitch parts that could be made into a 3pt hitch for the B; Tom Butterfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Joseph OR)

John Deere B, no tag, but appears to be 50's, new tires, front and rear, with minor weather checks, very good paint and decals, have had it in parades, runs good, has hyd,, just don't need a big tractor anymore, $2,500; Larry L. Swope nnn-nnn-nnnn (Phelan CA)

John Deere B. Good sheet metal, good paint, needs rear tire, wide front end, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere BO, 1937, older restoration, nice looking, works perfectly, $5000 obo; Brian nnn-nnn-nnnn (Enumclaw WA)

John Deere BR, 1939 BR, sn 330421. Completely restored, high compression pistons, new fenders, hood and radiator core, $6,000 Rick nnn-nnn-nnnn (Kuna ID) [link to photo]

John Deere D 420U, wide front, 1957, sn 106102, restored. 4-speed, PTO. Runs, drives good. New tires front, 75% rear. Rear wheel weights, 3pt with correct 3rd link. 4yr. old paint with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all work receipts. With restored 415-A 3pt integral plow (2-14). New Tyler Buchheit points, extensions and trash boards. Bottoms and coulters are soft painted when not in use. Manuals and all paperwork. Great original set-up, $5500 obo. Pictures on request. Would use as part trade for restored JD 520 wide or narrow front; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

John Deere D's, have 2. One on steel one on rubber. Make one tractor out of 2. Sold as a pair only; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere G, 1947, nice unrestored running tractor. Mid-year tractor, after GM but before late 47; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere H, 1939, narrow front, sn 5520. Runs great, looks good, $2500 obo. Will send pic via email; Mark nnn-nnn-nnnn (Oakdale CA)

John Deere H, 1946, electric start, restored, very nice, $4250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere H, electric start, runs good, $3970; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere HN. New rear Firestone tires. Older restoration. Running tractor but needs some TLC; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere L, 1941, $1600; John Dornbusch nnn-nnn-nnnn or nnn-nnn-nnnn (Brookings OR)

John Deere L, unstyled 1937, sn 621080. Second one built, completely restored and original carburetor. I also have the original mag and a belt pulley, $10,000; Rick Poulton nnn-nnn-nnnn (Kuna ID) [link to photo]

John Deere Lindeman crawler frame, $400.00 offer Also have pads and other Lindeman parts. nnn-nnn-nnnn After 3PM; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere Lindeman hydraulic pump #TE200, $45. Gas tank & hood, $50. Many other parts available; Bob nnn-nnn-nnnn (Sandy OR)

John Deere R, 1949. Project tractor. Block bored, head done, comes with oversize pistons. Tractor rolls but engine is apart; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere unstyled AO, hand start, complete with good 26 inch rear tires. Needs restoration, $1500. Also unstyled AO parts tractor available, $500; Frank 408 202-2810 (Morgan Hill CA)

John Deere wheel disk, $850; Dave Gallant nnn-nnn-nnnn (Boring OR)

M grill, needs repair, $30; Al Barkl nnn-nnn-nnnn (Elko NV)

Massey Ferguson 30 Industrial tractor with loader and 3 pt. hitch. No PTO with ROP enclosed cab. Perkins diesel and shuttle transmission, $3950; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Harris 44, 1949. Tin pretty good with very light surface rust, $750; Warren Harger nnn-nnn-nnnn (Central Point OR)

McCormick Deering 1929 Model 10 20 steel wheel tractor, engine is free, magneto rebuilt, no time to get running as planned, $2500 obo; George nnn-nnn-nnnn (Willows CA)

McCormick Deering 22-36 on rubber. Runs well, looks good, ready to restore, $1950 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

McCormick Deering O-14 orchard project found out doors, very complete, unit block is freeze cracked. I have an extra repaired block to go with it, $2200 or interesting trade; Chuck Kaufman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hood River OR)

McCormick Deering T 20, runs and steers good, $1950; Jim Chamberlin nnn-nnn-nnnn (Auburn CA) [link to photo]

Minneapolis Moline 1956 UTS special. Full fender big tractor, no rust outs, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)

Minneapolis Moline GVI, great condition, ready for the next pulling event; Stu Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)

Oliver 60 Row Crop 1941. Looks and runs well with new 6 volt battery and fresh engine oil/filter. 6 speed transmission. All tin is present and fits well along with fenders. Has radiator canvas, three lights, rear wheel weights and 1940s steering knob, $2350; Dave Pembroke nnn-nnn-nnnn pls lv message (Silverton OR)

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold, $8500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Albany OR)

Pony motor from 1953 Cat 7U. Electric start, mounted on frame so you can run it. Good condition, $600. From some tractor, head, complete with manifolds, rucker arms, etc, $300. 12 volt gen, gear driven, $125; Mert Griffin nnn-nnn-nnnn (Clatskanie OR) [link to photo]

Rebuilt head for John Deere big bore GP, $925; Dave Gallant nnn-nnn-nnnn (Boring OR)

Rims: 2 rear rims for a Farmall 200, have not had chloride in them, no rust, $235; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Rumely Oil Pull W, lightweight. 20-30 hp, 1928. Rare, all original, good paint, runs good. In barn since restored. Ran at Calif. State Fair approx. 15 yrs. Asking $25,000; Wayne Percival nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR) [link to photo]

Super H, 1954, restored, $5400; Al Barkl nnn-nnn-nnnn (Elko NV)

Tires: 11.2-38 rear tractor tire. 11-38 rear tire, serviceable; Al Barkl nnn-nnn-nnnn (Elko NV)

Tires: two 9.5 X 24 rear tractor tires 45 degree 50% or better tread. Tires are not a matched set - on wheels that will fit a Model L John Deere, $400; Tom Butterfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Joseph OR)

Tracks: Set of used Cat 10 tracks, fair condition, $500; Larry 541 937-3412 or xxxx@xxxx.xxx (Dexter OR)

Tractor tires, two size 750x10. One $35 and second for $50. One tire size 9x10, $60; Dave Gallant nnn-nnn-nnnn (Boring OR)

Wheels/rims: one cast wheel for John Deere A, without rim, $150. One cast wheel with rim & weight, for 38" rim, $250; Roy Whipp nnn-nnn-nnnn (Phelan CA)

Wheels: 3 industrial front wheels w/hard rubber and cast centers for Case L or LA, $100 each or 3 for $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Wheels: Farmall M steel rear wheels. Oliver rear steel wheels. Year unknown. Make offer; Del Hollingsworth nnn-nnn-nnnn (Albany OR)