January 2014 - Tractors & Parts For Sale

All Classified Ads

1920s Ford Model T tractor conversion. This is a tractor built from a kit many years ago. Sears, Montgomery Wards among others produced kits to convert Model Tís to economical tractors. It has the model t transmission plus another transmission behind that running into pinion gears on the rear axle that drive large bull gears. Very unique and in good condition. Engine is in good shape and will run with minimal work. $3000; Larry Daniels nnn-nnn-nnnn (Phelan CA)

Allis Chalmers B, 1939. Show condition, $3000; Rod Hisken nnn-nnn-nnnn cell or xxxx@xxxx.xxx (Oregon House CA) [link to photo]

Allis Chalmers G, 1955. Restored. Engine completely rebuilt. New tires, $2900; Duane Friend nnn-nnn-nnnn or xxxx@xxxx.xxx (Zillah WA)

Allis Chalmers WC tractor with front mount buzz saw. Runs ok but needs carb rebuilt. Almost new tires on front. 1 very good tire on rear. Needs both rear rims and 1 rear tire. Sheet metal ok, $975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Allis Chalmers WM, 1934, valves ground tracks good, 15" pads, sand blasted and painted, $2700 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers WM, 1937. Valves ground, sand blasted and painted, $3250 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis-Chalmers crawler tractor manuals and brochures. Models KO, LO, M, HD5, 6, 7, 9, 10, 14, 19. Also Farr air cleaner and Detroit manuals. Call or email your needs. Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Case 1945 small tractor, starts right up, running. I learned to drive on this tractor. $2500; Sidney Booth nnn-nnn-nnnn (Kamiah ID)

Case 400 Case-o-matic drive. Excellent tin, engine, new paint, decals, 3 pt. hitch sn6099112, $2200; Barry Zimmerman nnn-nnn-nnnn or xxxx@xxxx.xxx (Manton CA)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10 track set, $400; Larry Severance nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Caterpillar 28 tractor. Has well-built hydraulic tilt dozer blade. Hand start in running condition, and undercarriage looks good. One of 1,171 made; sn 4F899SP, $3200 obo; Mike Roskamp nnn-nnn-nnnn (Outlook WA)

Caterpillar D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D2 with blade, $1750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar motors: D4 pony motor, runs good, $3000; D2 pony motor, runs good, $3500. Pony motor rebuilt, fits D2, D4, needs magneto magnet, $800; Tom Ryan nnn-nnn-nnnn (Barstow CA)

Caterpillar No. 11 Auto Patrol grader, 1937. This was running when parked a few years ago. The pony motor needs a new head, so we always pull started it. Tires are all functional, and all functions of blade and scarifier work. We used it quite a bit on the farm and for plowing snow. Pony motor is currently pulled off to repair, $3500 obo; Mike Roskamp nnn-nnn-nnnn or xxxx@xxxx.xxx (Outlook WA)

Cletrac AD 1936 Hercules Diesel, Hydraulic Dozer, valves ground, sand blasted and painted, $3300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda Diesel, good undercarriage, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac HG 42 crawlers, have two complete parts machines. One with Carco winch, extra parts, one OC3 frame and tracks. Would like to sell all as package, $2000; Larry Severance nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Cletrac W-12, approx 1920 model. Fresh paint, runs good, $3500; Don nnn-nnn-nnnn (Quartzsite AZ) [link to photo]

Cockshutt 30, 1947; Al Barkl nnn-nnn-nnnn (Elko NV)

Cockshutt 30, 1955, sn 48153. Rubber good, start and run great, $2100 obo; Stuart Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)

Co-op E3, 1946, sn 112; Al Barkl nnn-nnn-nnnn (Elko NV)

Ensign carbs for Cat 20, 30 and 60 all rebuilt. Ensign models AAE, AE, AEL $450-$650. D2-D6 battery box covers with thumb screws $80. D2 engine side panels $195 per pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 200 with loader. Includes 2pt plow, disc, blade, and sickle mower. Tractor has fresh paint, nice tires front and rear, and is very original, $3500; Fred nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell ID)

Farmall 300, 1956, project tractor. Complete in frame overhaul. Nice fronts, usable rears. Offer. Possible delivery West of the Mississippi. Seller motivated; Ray Chrispens nnn-nnn-nnnn or xxxx@xxxx.xxx (Terra Bella CA)

Farmall A, 1944. New bearings, rings, rebuilt head starter and radiator, good tires and tin, $1500; Rod Hisken nnn-nnn-nnnn cell or xxxx@xxxx.xxx (Oregon House CA)

Farmall C project tractor. Has hydraulics and belt pulley gear box on the back. Motor stuck. Front tire in good condition, rear tires not in good condition, $550; Mike Roskamp nnn-nnn-nnnn or xxxx@xxxx.xxx (Outlook WA)

Farmall C single front wheel only with weights; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Farmall Cub needs a home, love & attention. Parked inside over twenty years. Engine rolls over nicely but no spark. Good tin. Hydraulics equipped. I need the space & don't have time for restoration. No implements. $900 cash; Mike nnn-nnn-nnnn (Puyallup WA)

Farmall Cub parts for sale: rear end/transmission, no shift lever. Lower drives, right & left. Steering wheel & shaft with lwoer gear. Front axle & steering gear unit. Front wheel & weight. Rear wheels & good rims. Stuck engine. Gas tank & partial hood. Radiator & side brackets. Radiator fan. Flywheel. Steering wheel stand. Governor & housing. Throttle, no linkage. Carb to air cleaner tube. Air cleaner cap. Flywheel/clutch/driveline housing. Engine head. Clutch. Fenders. Tool box. Steering drag links; Wendell Newman nnn-nnn-nnnn or nnn-nnn-nnnn (Carson City NV)

Farmall Cub parts: call with your needs; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub with sickle bar mower, very straight and clean, very good rubber, reduced to $1500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub, 1949. A show stopper, & a great buy at $4000; Rod Hisken nnn-nnn-nnnn cell or xxxx@xxxx.xxx (Oregon House CA) [link to photo]

Farmall Cub, 1953, sn 176018J. Needs TLC. Runs good, recent tune up: carb overhaul, hydraulics work good, pto will not engage. New battery box. No wheel weights, $900 obo; Ray Sage nnn-nnn-nnnn (Camas WA)

Farmall Decals. Compete sets of the correct decals for the Regular, F-20, F-30, F-12, and F-14. Partial sets for W-series, O-series, and T-series. These are commercial grade vinyl decals with a UV protective coating. Pictures available by email. Complete sets $70 or less; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

Farmall H, wide front end, 1952. Good parts tractor, $550; Barry Zimmerman nnn-nnn-nnnn or xxxx@xxxx.xxx (Manton CA)

Farmall Manuals; A & B series tractors Parts TC-26-A, dated 7/44, condition good +, $25 postpaid. Farmall H tractors Parts TC-27, dated 12/42, condition good +, $25 postpaid. Implement & Tractor Farmall Shop-Service Manual # IH-8, Super & Nonsuper Series, A, B, C, Cub, H, M, MD, MTA, MTAD, 4, 6, D6, W6TA, W6TAD, 9, D9, dated 1956, 88 pages, good condition, $35 postpaid.; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Farmall: various Farmall parts, 1953 Super M, F-11 loader, call for prices; Al Barkl nnn-nnn-nnnn (Elko NV)

Ferguson 30/50 hood & gas tank; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 700 and 900 series parts. Parting out Ford 900 tractor. Please call for the parts you need, have hydraulic pump, power steering, single and wide front, and everything else, complete tractor; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Ford 8N, 1949, complete rebuilt ready to work, new tires, sn 8N157349. Ford 8N, 1950, bad engine, sn 8N521932. Rebuildable complete 1948 9N-2N-8N engine sn 8N117887; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1951-52, Dearborn loader with front pump, 90% 14.9x28 tires, new pan seat, tight steering, excellent 3-pt, brakes & clutch. HD 12V battery & new alternator, good tin, 3-pt drawbar, $2450; Iver Christenson nnn-nnn-nnnn (Vancouver WA)

Ford 8N, have two. One has Sherman trans, one has Howard trans with side mount distributor. Both for parts or restore. Will not part out. Call for prices; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

Ford 8N, sn 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original). Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N, very clean, runs excellent, 3 pt and pto, $1950 or offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Ford 900 hydraulic parts, all working when removed from tractor: top cover, hyd. pump, 3-point lift arms, $600 for all; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Ford 9N, 1940, tin is excellent, Sherman overdrive, custom grille guard & footrests, new 7:50x16 tri ribs on appropriate wheels, O.R. clutch, 90% 12.4x24 tires on 10" rims, in dry storage for some time. 40 lb compression, doesn't run except when towed, $1950; Iver Christenson nnn-nnn-nnnn (Vancouver WA)

Ford N series parts: 1939-1949 engine crankshaft reground .020 rods & mains for 9N-2N-8N bearings included, $375. Rebuilt Sherman combo step up/step down aux transmission sn 66180. Howard aux transmission for parts or rebuild, sn 11570. Steering gear sectors for Ford 8N tractors. Brake shoes for 8N; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford tractor engines: rebuilding 1939-1949 front distributor, should be complete in December 2013. Also rebuilding 1952 side distributor, sn 8N466871; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford tractor parts: 172 cu. in. gasoline engines, one new rebuild, zero hours, $2000. One strong running take out, $675. One Industrial engine out of swather, $350; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Ford wheels: 2 sets of 13.6x 28 tires on Ford 900 spinout wheels; one set unmatched 45degree tread $275; matched pair 23 degree, $500, one set of 9.5 x 36 with 2N centers would make nice High crop tractor; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Fordson Dexta diesel, a real neat little tractor. I believe it was made in 1958. Everything works. Pictures were taken while it was running. It smokes just a little when you start it, but doesn't smoke when running, $2,400 obo; Brian Tate nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

Gambles Farmcrest 30, 1948; Al Barkl nnn-nnn-nnnn (Elko NV)

Happy Farmer 12-24, can be seen at the Welton AZ tractor show Jan 17-19 or call for photos; Buster Brown nnn-nnn-nnnn (Yuma AZ)

Hood for John Deere 50 or 520, $125; Dave Gallant nnn-nnn-nnnn (Boring OR)

IHC 141 combine Operators Manual, excellent condition, $45 postpaid. International 510 Grain Drill Operators Manual, good condition, $7.50 postpaid. McCormick Operators Manual for #70 (6 bottom) Plow, dated 12/58, condition good +, $7.50 postpaid. Operators Manual for #70 (3 - 5 bottom) Plow, condition fair, $6.50 postpaid.; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

International TD-35-40 new standard crankshaft, $175. IH TD-35-40 gear box, some surface rust but gears are good, $150; Dan McCullough nnn-nnn-nnnn (Klamath Falls OR)

John Deere 1520 gas 38 hp, live PTO, high low transmission, 3pt and PTO, power steering with loader, $6750 or offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

John Deere 400 ID (with a 2-53 Detroit Diesel engine), 1959. This is an industrial wheel tractor (similar to a 435). Engine runs strong. 16.9 X24 rear wheels 8 hole hubs, non-adjustable axle. Front axle industrial strength, adjustable. 5 speed transmission, $4500; Norm Keesler Nampa Idaho nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

John Deere 40-420 tracks 4 and 5 roller 14" pads; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere 420T, fully restored, runs and looks great, good tires, working hydraulics, pto, and three point, $4200. Email for photos; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or see www.vintagetractors.com (Woodland CA)

John Deere 420U, 1957, sn 106102, restored. Wide front, 4 speed, PTO. Runs and drives good. New tires front, 80 to 90% rear. Rear wheel weights, 3 point with correct 3rd link. 4 year old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork. With restored 415-A 3 point intergal (2-14 bottom) plow. New Tyler Buchheit points, extensions and trash boards. Bottoms are soft painted when not in use. Manuals and paperwork. Nice original set up. Everything works. $5500; Bob Folk nnn-nnn-nnnn xxxx@xxxx.xxx (Eastsound WA) [link to photo]

John Deere 42OC complete engine with radiator. Good oil pressure, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 5020 Cab. Original factory cab with an upper and lower door, $400 obo; Mike Roskamp nnn-nnn-nnnn or xxxx@xxxx.xxx (Outlook WA)

John Deere 520, sn 5202779. Narrow front, runable but not running now, $4000; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere AOS, runs, complete, needs restoration, $7500. Email for photos; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or see www.vintagetractors.com (Woodland CA)

John Deere AW, 50W, 4 tractors all with round tube wide front ends, various conditions, $1000- $2700. Also available: separate round tube wide front ends, split pedestals for A and B, and individual front end parts. Email for photos; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or see www.vintagetractors.com (Woodland CA)

John Deere B with electric start and Rollomatic front end. Nice tractor. I believe it is a 1951 so it is toward the end of the run when they knew what they were doing - LOL. Runs good. Come and get it, $2,200; Brian Tate nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, sn 217240. This is a 1949 tractor. I have put live hydraulics on and built a loader for the tractor. In addition, the rock shaft works, and has a three point assembly mounted. good rubber, older paint, runs very well, $4750; Jack Kohl nnn-nnn-nnnn (Wilsonville OR)

John Deere BN, 1938. Rare tractor needs restoring, comes with parts tractor, $3500; Dave Itel nnn-nnn-nnnn (Aurora OR)

John Deere BN, 1951, complete, needs restoration, or use for parts. It has 9x42 rears and 5.5x16 in front. Some parts are cleaned and primed, $800 obo; Ben Lyon nnn-nnn-nnnn (Gig Harbor WA)

John Deere BO Lindeman: Two complete sets of hydraulic pump, tool bar, carrier brackets, and blades, $1900 for everything. Email for photos; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or see www.vintagetractors.com (Woodland CA)

John Deere BR, 1936, complete restoration in top condition, hand start, steel wheels, excellent starting and running, $5500 obo; John Shierman nnn-nnn-nnnn (Battle Ground WA)

John Deere BWH, 1945, confirmed by Two Cylinder as a BWH shipped to Colusa, CA, All the BWH parts are good, including the 40 inch spoked wheels, the engine and sheet metal are poor and will require a donor tractor. $2900; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or see www.vintagetractors.com (Woodland CA)

John Deere G parts: flathead completely rebuilt, new valve guides, valves good shape, one new, no valve keepers, had crack repaired by professional cast welder, $400; Glenn Carrigan nnn-nnn-nnnn (Moses Lake WA)

John Deere G, sn 34906. Shipped to Madras Oregon in 1948. One of only 1547 tractors with all fuel and single front wheel features. Have production record from John Deere. Single front wheel is on tractor, and have Roll-A-Matic for the tractor. New tires, paint, sharp, $5900; Jack Kohl nnn-nnn-nnnn (Wilsonville OR)

John Deere H, 1946, electric start, restored, very nice, $4250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere H, electric start, runs, older restoration, new price $3100 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere L hand-crank running tractor. Older restoration with nice rubber. All oils have recently been changed. No bib, belt pulley, or ID tag, $1850 cash; Dave Pembroke nnn-nnn-nnnn (Silverton OR)

John Deere LA, 1941, good tires, tin, hand start, good condition, $2500; Rod Hisken nnn-nnn-nnnn cell or xxxx@xxxx.xxx (Oregon House CA)

John Deere Lindeman crawler, excellent condition. Runs, hand start, good tracks, no blade, sn 336407, $7000 or offer, call after 3pm; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere M tractor engine, engine only, complete fan through clutch, minus starter. Hear it run, $550; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere M-40 radiator, $100. Rear wheel weights, $100. Rear wheels (26"), $100. Drawbar/Hitch $50.; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere R, restored, with new brakes and clutch. Put over $10,000 in restoration, will sell for $9,000. Located in Pendleton OR; Doug nnn-nnn-nnnn.

John Deere Tractors for Sale: 1940 HN, $3250. 1943 B on steel, running original tractor, $3000. 1948 AW High Clearance, $2500. 1947 G, $2500. 1952 AW, $1700. 1950 John Deere AN, $1200. 1953 John Deere 50, $1000; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere wheels: one 12 spline factory flat spoke wheel for John Deere B, one steel wheel with extension for John Deere A; Dave Itel nnn-nnn-nnnn (Aurora OR)

Lanz Bulldog, 1935. One cycle diesel, made in Germany, all new tires. Runs excellent, parade ready, $15,000; Mel Klaus nnn-nnn-nnnn (Prineville OR) [link to photo]

Lindeman dozer, nice straight blade, hydraulic pump, arms not using on my Lindeman, $1500; Eugene nnn-nnn-nnnn (Davenport WA)

Massey Ferguson 65 diesel high clearance. Runs great, always starts in cold weather, power steering, and has hydraulic remotes. 13.6-38 rears, adjustable wide front. Great everyday tractor, $3800; Mike Roskamp nnn-nnn-nnnn or xxxx@xxxx.xxx (Outlook WA)

Massey Ferguson 98, 3-71 GMC engine, restored, show it or pull it, $15000; Dave Itel nnn-nnn-nnnn (Aurora OR)

McCormick Deering W-30, 1935. Steel wheels, extensions on the front, good tin with nice patina, tractor hasn't been started in a few years. With lubing and cleaning of the fuel system it will run fine, original and complete. No cracks or welds, $2300; Larry Daniels nnn-nnn-nnnn (Phelan CA)

McCormick Deering W30, 1936. Tin is in good shape. Refurbished fuel tank. New intake, exhaust manifold. Rebuilt magneto. Runs. $1600; Duane Friend nnn-nnn-nnnn or xxxx@xxxx.xxx (Zillah WA)

Minneapolis Moline R: starts and run good, older restoration, new tires front rear hold airs, old Firestone pattern; Stuart Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)

Misc tractors & parts: Cockshutt 30, 1947; Co-op E-3, 1946, sn 1120; Farmall items: pulleys, drawbar, F-ll loader; Gambles Farmcrest 30, 1948; Farmall SH, 1954; Farmall SM, 1953, with loader; Al Barkl nnn-nnn-nnnn (Elko NV)

Now available, Used parts for Styled John Deere D. Email for photos; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx or see www.vintagetractors.com (Woodland CA)

Oliver OC3, wide tread, good track chain, runs good, in shed, $2000; Gene nnn-nnn-nnnn (Davenport WA)

Rebuilt head for John Deere big bore GP, $925; Dave Gallant nnn-nnn-nnnn (Boring OR)

Tires: Two Firestone tires, 9x24, worn/cracked, 20% remaining. One Farmhand 9.5x9.24, good tread, needs strong tube or flaps. Two Goodyear tires, 24.4x24 matched set, 60% 7 50%, sure grip; Wendell Newman nnn-nnn-nnnn or nnn-nnn-nnnn (Carson City NV)

Tractor tire: Armstrong Hi-Power lug, heavy duty R-1 11.2x24, 99% tread, $100; Nick Neuburger nnn-nnn-nnnn eves (Galt CA)

Tractor tires, two size 750x10. One $35 and second for $50. One tire size 9x10, $60; Dave Gallant nnn-nnn-nnnn (Boring OR)

Two 16" front wheel weights for tractor, $200; JH Keith nnn-nnn-nnnn (Hermiston OR)

Wagner WD9, new tires, good sheet metal, 4 cyl Cummins, call for more info, $10,000; Gene nnn-nnn-nnnn (Davenport WA)

Wheels: Full set of F&H wheels to fit 6-spline John Deere D. Some calcium damage, $1000; Eugene nnn-nnn-nnnn (Davenport WA)

Wheels: Massey Harris 44 skeleton wheels, with lugs. Some welds, $600. John Deere 12 spline skeleton wheels, some welds, $600; Eugene nnn-nnn-nnnn (Davenport WA)