February 2014 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1939. Show condition, $3000; Rod Hisken nnn-nnn-nnnn or xxxx@xxxx.xxx (Oregon House CA)

Allis Chalmers C wide front, complete with lights and good rear tires, engine stuck, $450 obo; L Montero nnn-nnn-nnnn (Jackson CA)

Allis Chalmers WC tractor with front mount buzz saw. Runs ok but needs carb rebuilt. Almost new tires on front. 1 very good tire on rear. Needs both rear rims and 1 rear tire. Sheet metal ok, $975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Allis Chalmers WM, 1934, valves ground tracks good, 15" pads, sand blasted and painted, $2700 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers WM, 1937. Valves ground, sand blasted and painted, $3250 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Case 1190 diesel parts tractor, runs, $1000; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Case 300, 1957, round nose, very rare, sn 6077838. Diesel, 3 pt. PTO. One set remotes, front and rear weights. No rust, runs great, tires fair. $10,000. From the research I've done, I believe this to be one of only 57 diesel tractors; Larry nnn-nnn-nnnn (Doris CA)

Case 400 Case-o-matic drive. Excellent tin, engine, new paint, decals, 3 pt. hitch sn6099112, $2200; Barry Zimmerman nnn-nnn-nnnn or xxxx@xxxx.xxx (Manton CA)

Case 500 DSL rebuilt engine, fuel system, and electrical system. New rear tires. Nice usable tractor, $4800; Ken Foertsch nnn-nnn-nnnn (Medical Lake WA)

Case 995, runs, $3500; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Case C parting out, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, 1929, complete and stuck on cut downs to rubber has rare flat belt water pump, $650 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F&H hc245 Rear round spoke wheels 9x24 very nice and rare $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case collection for sale- 1947 LA Case has new rear tires, good metal, rebuilt starter, runs good, $2500. 1929 Case C on steel original flat belt water pump. Restored, runs good, $2500. 1938 Case CC, unrestored, runs good, all orig. Fair tires, hard to come by model, $2500. 1936 Case RC single front tire, restored, new rear tires, runs great, all original, $2500. See web site for pics: www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case D, 1952, D live pto hydraulic; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Case DC4, 1953, with foot clutch. Also used parts for VA, S, D & LA Case tractors; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Case LA. Good clean older tractor. Runs great, $1600; Ken Foertsch nnn-nnn-nnnn (Medical Lake WA)

Case S. Good clean older tractor. Runs great, $1300; Ken Foertsch nnn-nnn-nnnn (Medical Lake WA)

Case SC, 1949, narrow front, barn stored, fenders, lights, repainted, easy start, runs good, $2500 obo; Ron nnn-nnn-nnnn (Carson City NV)

Case SI with factory Evans winch on full steel. Possibly the only complete one known, $10,000 or make offer or part trade; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10 track set, $400; Larry Severance nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Caterpillar 15 PV serial number. Have 2. Both run, drive & steer good. Decent sheet metal. Both are top seat and standard gauge. Both have updraft carbs. $1500 each obo; Rick nnn-nnn-nnnn (Truckee CA)

Caterpillar 28 tractor. Has well-built hydraulic tilt dozer blade. Hand start in running condition, and undercarriage looks good. One of 1,171 made; sn 4F899SP, $3200 obo; Mike Roskamp nnn-nnn-nnnn (Outlook WA)

Caterpillar 30, runs & drives, top seat & standard gauge, $1500 obo; Rick nnn-nnn-nnnn (Truckee CA)

Caterpillar 7-C, 1932, small 15, driver, $9000; Bob nnn-nnn-nnnn (Sandy OR)

Caterpillar D-2 5J series wide gauge tractor. Tractor runs good, needs a little injector work, have extra injectors. Undercarriage good, $1850; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 w/canopy, 2-way blade, remotes, $2500; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Caterpillar No. 11 Auto Patrol Grader, 1937. Large 3 cyl. diesel, tandem axle, factory cab, tires all functional. Has 12' blade and scarifier. Pony motor has been pulled off and needs a head, rod, and piston. We have always pull-started it. Has been sitting for a few years, $3250 obo; Mike Roskamp nnn-nnn-nnnn (Outlook WA)

Caterpillar No. 11 Auto Patrol grader, 1937. This was running when parked a few years ago. The pony motor needs a new head, so we always pull started it. Tires are all functional, and all functions of blade and scarifier work. We used it quite a bit on the farm and for plowing snow. Pony motor is currently pulled off to repair, $3500 obo; Mike Roskamp nnn-nnn-nnnn or xxxx@xxxx.xxx (Outlook WA)

Caterpillar Thirty, 6G series wide gauge. Have had engine running, have not driven tractor. Tractor is mostly complete, comes with belly pan, and an extra radiator. Undercarriage fair, sheet metal fair, $2500; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar Twenty Eight, topseat standard gauge. Engine free, not running. It has manifolds and carb, but they are rough, but possibly useable. I have a new drop tube manifold part for it. sheet metal is fair, undercarriage is fair, $1650; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar Twenty parts tractor, PL series, standard gauge for parts. No manifolds, carb, or mag, $275; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar Twenty-Two parts tractor, 2F series standard gauge for parts. Has manifolds, no carb or mag. Some sheet metal, undercarriage poor, has offset grousers, $275; Kim Kestler nnn-nnn-nnnn (Reno NV)

Cletrac AD 1936 Hercules Diesel, Hydraulic Dozer, valves ground, sand blasted and painted, $3300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda Diesel, good undercarriage, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac HG 42 crawlers, have two complete parts machines. One with Carco winch, extra parts, one OC3 frame and tracks. Would like to sell all as package, $2000; Larry Severance nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Cletrac K engine no carb or mag, $100; L Montero nnn-nnn-nnnn (Jackson CA)

Cletrac W engine complete no carb or mag, $100; L Montero nnn-nnn-nnnn (Jackson CA)

Cletrac W frame nice condition, no welds, $100; L Montero nnn-nnn-nnnn (Jackson CA)

Cletrac W-12, approx 1920 model. Fresh paint, runs good, $3500; Don nnn-nnn-nnnn (Quartzsite AZ)

Cockshutt 30, 1947; Al Barkl nnn-nnn-nnnn (Elko NV)

Cockshutt 30, 1955, sn 48153. Rubber good, start and run great, $2100 obo; Stuart Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)

Co-op E3 live pto hydraulic runs; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Co-op E3, 1946, sn 112; Al Barkl nnn-nnn-nnnn (Elko NV)

Earthmaster C complete tractor rolling chassis, no engine, has rear weights & hyd, good sheet metal, $200 obo; L Montero nnn-nnn-nnnn (Jackson CA)

Ensign carbs for Cat 20, 30 and 60 all rebuilt. Ensign models AAE, AE, AEL $450-$650. D2-D6 battery box covers with thumb screws $80. D2 engine side panels $195 per pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 300 row crop, 1954, with correct Z code parts. Just finishing up a complete engine overhaul, new pistons, liners, bearings, head rebuilt. Nice tin. All lights and gauges in good shape. Has narrow front and Norden wide front included as well. Has fast hitch, live pto, and TA. Tires in good shape. $2750 obo; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Farmall 350 side panels, center strip; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall BN, doesn't run, collector's item, $750; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Farmall C #1527. Tractor is complete, but motor stuck. Good single front tire, rear tires will need to be replaced. Has hydraulics and belt pulley gear box, $500; Mike Roskamp nnn-nnn-nnnn or xxxx@xxxx.xxx (Outlook WA)

Farmall C. It's pretty much all there, but needs both rear rims and tires (cast iron wheels are fine). Needs restoration - tin is pretty good. Send email for pictures, $400; Brian Tate nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

Farmall Cub parts: call with your needs; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub with sickle bar mower, very straight and clean, very good rubber, reduced to $1500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall H, wide front end, 1952. Good parts tractor, $550; Barry Zimmerman nnn-nnn-nnnn or xxxx@xxxx.xxx (Manton CA)

Farmall Manuals; A & B series tractors Parts TC-26-A, dated 7/44, condition good +, $25 postpaid. Farmall H tractors Parts TC-27, dated 12/42, condition good +, $25 postpaid. Implement & Tractor Farmall Shop-Service Manual # IH-8, Super & Nonsuper Series, A, B, C, Cub, H, M, MD, MTA, MTAD, 4, 6, D6, W6TA, W6TAD, 9, D9, dated 1956, 88 pages, good condition, $35 postpaid.; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Farmall parts: Farmall C rear wheel and rim, $100 for both. Belt pulley gear box for H Farmall, no pulley, $50. Farmall Cub rear wheels, $80. Cub rear rims, good. $100. Cub gas tank and partial hood, $40. Gas tank and steering stand for Farmall M, $35. One pair of 16” front rims for Farmall H or M, bolt-on style, $60. Wendell Newman nnn-nnn-nnnn or nnn-nnn-nnnn (Carson City NV)

Farmall Super H, 1954, restored; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M motor stuck, great project, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super M, 1953, Farmhand loader; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall W-6, gas, $1000; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Farmall: various Farmall parts; Al Barkl nnn-nnn-nnnn (Elko NV)

Ford 8N parts; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N, 1949, rebuilt except hydraulics, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1950, bad engine, $850; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, have two. One has Sherman trans, one has Howard trans with side mount distributor. Both for parts or restore. Will not part out. Call for prices; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

Ford 8N, sn 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original). Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N. Works good. Farm fresh, not a show tractor. Send email for picture, $1700; Brian Tate nnn-nnn-nnnn (Redmond WA)

Ford 9N-2N-8N Ford parts & pieces, will sell all for $750. Buyer picks up. Engines being rebuilt not included; Ford 8N, 1949, rebuilt except hydraulics, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford Golden Jubilee, 1953, been restored and in good shape. Have extra rims and wheel centers to go with tractor, $3500; Billy nnn-nnn-nnnn (Tenino WA)

Fordson 2N, 1943, in very good shape. It purrs, and still has lots of work left in it, or is a great collector tractor. Original owner’s manual included, $1500, or obo; Jim Bauer nnn-nnn-nnnn or xxxx@xxxx.xxx (Kennewick WA)

Fordson Super Major, collector's item, $2500; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Fordson tractor, has rubber tires, 1300x24 rear, 750x16 front. Has Fordson high compression head. Engine turns over. Sn 615, 1928 or 1919; Rich nnn-nnn-nnnn (Verdi NV)

Gambles Farmcrest 30, 1948; Al Barkl nnn-nnn-nnnn (Elko NV)

IHC 141 combine Operators Manual, excellent condition, $45 postpaid. International 510 Grain Drill Operators Manual, good condition, $7.50 postpaid. McCormick Operators Manual for #70 (6 bottom) Plow, dated 12/58, condition good +, $7.50 postpaid. Operators Manual for #70 (3 - 5 bottom) Plow, condition fair, $6.50 postpaid.; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

IHC wide front end. This came off a 1958 Farmall 350. Will also fit a Farmall 300 and maybe others. It is a stock IH unit, not a Schwartz. This front end was stripped, painted, and stored in a crate since restoration. It is in perfect shape with no cracks or welds and includes every nut and bolt and all the fittings. $1200. I can deliver this to the Tulare Antique Tractor show in April if needed; Richard Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)

International 350 Hi-Utility Rare 800 built gas runs 2000 hrs. fast hitch 1 hyd. remote all lights, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 500 Dozer. 74 hrs on rebuilt gas engine. 6-way hydraulic blade. Auxiliary hydraulics at rear. R.O.P.S. Good undercarriage. Mounted post pounder. All manuals included. Nice machine, $8500; Sam nnn-nnn-nnnn (Clyde Park MT)

International Harvester 240 Utility. Rebuilt engine, new paint. Excellent tractor for show, parade or to use, $3800; Ken Foertsch nnn-nnn-nnnn (Medical Lake WA)

International TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International TD9, runs & steers, $2500; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

International TD9, starts and runs well. Has Isacson hyd. dozer. Everything works, $2800 or trade for anything John Deere. Delivery negotiable; Rob nnn-nnn-nnnn (Prineville OR)

Jacobsen HF-15, Perkins diesel, $2000; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

John Deere 1520 gas 38 hp, live PTO, high low transmission, 3pt and PTO, power steering with loader, $6750 or offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

John Deere 36" split rear rims for A and B tractors. Good shape, $250 pair; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere 40 crawler, gas, winch, Yakima blade, $5000; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

John Deere 40-420 tracks 4 and 5 roller 14" pads; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere 420C complete engine with radiator. Good oil pressure, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420C/430C Crawler fenders (both left and right), solid (no rustouts) but need some straightening, brackets Included, $100 for the pair; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere 420T, fully restored, runs and looks great, good tires, working hydraulics, pto, and three point, $4200. Email for photos; John Boehm xxxx@xxxx.xxx or see www.vintagetractors.com (Woodland CA)

John Deere 420U, 1957, sn 106102, restored. Wide front, 4 speed, PTO. Runs and drives good. New tires front, 80 to 90% rear. Rear wheel weights, 3 point with correct 3rd link. 4 year old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork. With restored 415-A 3 point intergal (2-14 bottom) plow. New Tyler Buchheit points, extensions and trash boards. Bottoms are soft painted when not in use. Manuals and paperwork. Nice original set up. Everything works. $5500; Bob Folk nnn-nnn-nnnn xxxx@xxxx.xxx (Eastsound WA)

John Deere 440 Diesel crawler with rare 6-way hydraulic blade, starts and runs good but needs a steering brake band on one side, does not steer that side, very good undercarriage, $4000 firm. I also have a 440 diesel crawler I am parting out, good tracks, motor stuck, lots of good parts. Sheetmetal, finals, etc; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

John Deere 440 diesel dozer, parting out: motor stuck, lots of good parts; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

John Deere 440 dozer with gas engine, does not run, has sat for many years but motor is free, has winch and excellent tracks, 2600 firm; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

John Deere 5020 Cab. Original factory cab with an upper and lower door, $400 obo; Mike Roskamp nnn-nnn-nnnn or xxxx@xxxx.xxx (Outlook WA)

John Deere 60 parted out, lots left: crank, head, flywheel, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 70 Diesel Row Crop, wide front. New motor with upgrades. Recent new radiator core, power steering rebuilt and transmission. PTO dynoed at 63 hp. Near new tires, $9,000; Neil nnn-nnn-nnnn (Clatskanie OR)

John Deere B 38-inch painted pressed steel rims with new 11.2 x 38 tires, $1000. Email with questions or to request photos. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere B with Rollomatic front end. Good running condition. Send email for picture, $2400; Brian Tate nnn-nnn-nnnn (Redmond WA)

John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1946, mostly complete (missing battery covers and seat assembly), needs total restoration. Sheet metal is fair. Engine block needs sleeve work. Tires are good and usable with new rear tubes, $800 obo; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere B, 1949. Engine stuck, good parts, $650; Joe Brick nnn-nnn-nnnn after 6 pm (Klamath Falls OR)

John Deere BO Lindeman crawler, driver, $6000; Bob nnn-nnn-nnnn (Sandy OR)

John Deere BO, 1946, sn 335642. Electric Start, turning brakes, new fenders. New rear tires on F&H spoked wheels. Have original hubs, wheels and one reasonable tire. $4500. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere BO, 1947, electric start with lights, driver, $2495; Bob nnn-nnn-nnnn (Sandy OR)

John Deere D or GP water valve, $135; Buck nnn-nnn-nnnn (Greenville IL)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere H, 1941, sn 21901, 1941. Nice original tractor, new brakes, hand start, runs well. Older but serviceable tires, $3500.Email with questions or to request photos. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere H, 1946, electric start, restored, very nice, $4250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere H, electric start, runs, older restoration, new price $3100 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere HWH Hubs. Bought these reproduction hubs for my HWH to install duals. Very good castings. Perfect fit. Lost interest, $3000. Email with questions or to request photos. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere LA parts, 1945, call with needs; Joe Brick nnn-nnn-nnnn after 6 pm (Klamath Falls OR)

John Deere LA, 1941, good tires, tin, hand start, good condition, $2500; Rod Hisken nnn-nnn-nnnn or xxxx@xxxx.xxx (Oregon House CA)

John Deere L-LA Parts: Hood for Hercules L, $50. 2 sets fenders, $40 per set. Spindles, $40 for set. Hub cap, $40. Drive shaft cover (needs repair) $50. Driveshaft cover end, $25. Exhaust elbow, $10. Steering shaft, $20. Eric Marshall nnn-nnn-nnnn (Sebastolpol CA)

John Deere M, beautiful condition, show ready, new tires, everything works, looks like new, $4500 obo; L Montero nnn-nnn-nnnn (Jackson CA)

John Deere M-40 radiator, $100. Rear wheel weights, $100. Rear wheels (26"), $100. Drawbar/Hitch $50; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere MC equipped with tool bar, double bottom plow and blade. Nice older restoration and ready to go. Email with questions or to request photos. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere MC, 1951, sn 13643. Interesting crawler from the Napa Valley. Equipped with a roll cage, heavy duty air cleaner and strengthened final drive housing. Christian Brother Winery tractor equipped to comply with CA OSHA rules. Good metal, runs well, $2950. Email with questions or to request photos. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere MC, 1952, with original factory dozer blade. Runs and drives like new, recent paint and tune up, $5400 obo; L Montero nnn-nnn-nnnn (Jackson CA)

John Deere MI Reproduction MI drawbar, $275. Email with questions or to request photos. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere MI, 1950, sn 10079, in Montana. Needs gauges, nearly complete, new turf tires, new front tires. new drawbar, repaired fenders with new brackets and supports as needed, $6500. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere MI, 1951, sn 10628, in Montana. Runs, nearly complete, new drawbar, repaired fenders with new brackets and supports as needed. Missing M1258T lift arm, gauges, $4500. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere MI, 1952, sn 11003. Restoring, complete engine rebuild, all new tires, not painted, $7500. Email with questions or to request photos. Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

John Deere tractor (DI) Styled, 1950, electric starter, dual exhaust, painter yellow, $4,800; Gus Lukrofka nnn-nnn-nnnn (Whittier CA)

John Deere tractors: A & B (have 6). '29 D, have steel for it. '37 AR. Plus a lot of parts. Would like to sell as one lot; C. Wallace nnn-nnn-nnnn (Toledo WA)

John Deere wheels: one 12 spline factory flat spoke wheel for John Deere B, one steel wheel with extension for John Deere A; Dave Itel nnn-nnn-nnnn (Aurora OR)

Leroi trac air mobile air compressor runs good, $2500; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Magneto for Caterpillar D2 and D4 starting motor, $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 65 High Clearance diesel. Good running and ready to work tractor. Always starts in the cold, has hydraulic remotes and power steering. 13.6-38 rears adjustable wide front end, $3600; Mike Roskamp nnn-nnn-nnnn (Outlook WA)

Massey Ferguson 65, bad engine, $1000; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Massey Ferguson 98, 3-71 GMC engine, restored, show it or pull it, $15000; Dave Itel nnn-nnn-nnnn (Aurora OR)

Massey Ferguson TO-35 1958 parts tractor, sn sgm182158,not running, $500 obo; Burle nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

Massey Harris 101 Jr. Standard, runs, needs side panels, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 44, gas, gas grill, $1500; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Massey Harris 444 Gas standard, 1 finger power steering, live pto hydraulic remote, runs good, great sheet metal hard to find, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massy Harris Pony: I have 2 parts tractors. Good block, crank, cam shaft, starter, 1 carburetor, 1 good hood, 1 repairable hood, 2 fenders, 2 grills, 2 dash's, 2 radiators (1 good other needs repair), rims with bad tires, some cultivator parts, hydraulic pump & 2 valves with cylinders, plus lots of other parts; Rex Wright nnn-nnn-nnnn (Ione CA)

McCormick Deering I-4, turns over, good shape, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1150; McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1800 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering W-30, 1935. Steel wheels, extensions on the front, good tin with nice patina, tractor hasn't been started in a few years. With lubing and cleaning of the fuel system it will run fine, original and complete. No cracks or welds, $2300; Larry Daniels nnn-nnn-nnnn (Phelan CA)

Minneapolis Moline R: starts and run good, older restoration, new tires front rear hold airs, old Firestone pattern; Stuart Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)

Minneapolis Moline U, engine needs work, has PTO, $500; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

New Repro hood for JD AOS, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)

NOS John Deere GP clutch-belt pulley, $300; Buck nnn-nnn-nnnn (Greenville IL)

Oliver 70 standard, engine stuck, sheet metal fair, has side panels, no fenders, one rear tire 95%, the other 50% (not matched), wheel weights, $500; John Lang nnn-nnn-nnnn (Monmouth OR)

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold $8500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Albany OR)

Oliver starters: two used 1365 Oliver starters, do not know if they work, $100 for both; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)

Parting out several tractors: Minneapolis Moline M5 diesel. Massey Harris 65 gas. Allis Chalmers Monarch 35 K. Caterpillar 30. Caterpillar 10, mostly castings; Buck nnn-nnn-nnnn (Greenville IL)

Rebuilt head for John Deere big bore GP, $925; Dave Gallant nnn-nnn-nnnn (Boring OR)

Scharmn tractor, 1948. Part of tractor is an air compressor. Good condition, $2500; Gus Lukrofka nnn-nnn-nnnn (Whittier CA)

Tractor tire: Armstrong Hi-Power lug, heavy duty R-1 11.2x24, 99% tread, $100; Nick Neuburger nnn-nnn-nnnn eves (Galt CA)

Tractor tires, two size 750x10. One $35 and second for $50. One tire size 9x10, $60; Dave Gallant nnn-nnn-nnnn (Boring OR)

Tractor wheels and tires; pair of 14-30 tires and rims, tires fair 25-30% $250 One 16.9-30 45 degree bar, 75% $200: Several 12, 13-26 tires in good shape, no pairs $125 each: Pair 11.2-36 tires. Have cracks but still useable $200 pair: No 28" tires; Jake Winn nnn-nnn-nnnn (Albany OR)

Tractors: International 10-20 (have 1). F-14 (have 2) T-20, (have 1). WO4 gas (one). Case 301 loader 5 roller SC wheel tractor, W.R. Old on steel Hart Parr; C. Wallace nnn-nnn-nnnn (Toledo WA)

Twin City 25-45, 1916, $225,000 or part trade; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Wehr motor grader, Case L powered, heavy 12 ft blade, $2000 obo; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Wheel weights, extra heavy, for Minneapolis Moline M5, $200 pr. Front wheel weight bracket for 4-star, $100. Front Minnie weights, $50 each. Rear wheel weights off of Case V, $200 pr; Buck nnn-nnn-nnnn (Greenville IL)

Zetor 8145, bad engine, $1500; Boyd's Implement Service nnn-nnn-nnnn or Toll Free (877) 842-9408 (Tillamook OR)