March 2014 - Engines & Parts For Sale

All Classified Ads

1910 Allan Brothers engine. Side shaft, vertical flyball governor. Call or email for pictures after 9:00 a.m. PST; Rob Skinner nnn-nnn-nnnn or xxxx@xxxx.xxx (La Habra CA)

Associated 1-3/4 hp, sn 627488?, on cart. Complete, looks good, has Associated high bar mag, $1100. Email for pictures & details; Kathy Repp, nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Associated 4 hp Mule Team, running, Webster mag, hand crank, crank guard. $1700; Mike nnn-nnn-nnnn (Cheney WA)

Atlas Lanova 3 cyl diesel 15 hp engine, rare, $300; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Battery coil boxes, have two, $110 each, postage paid in lower 48. 1/2" red oak with box joint corners glued, no nails. You final sand and finish. 12" long, 8" wide, 8" high, as per photo. Call, leave message, phone number to confirm availability; D Combs nnn-nnn-nnnn (Citrus Heights CA) [link to photo]

Brantford Cub 2 hp, sn 78468, no tag. Webster mag and igniter. Canadian engine built by Goold, Shapley and Muir. Has been painted with primer. Rocker arm bracket has been repaired, $1,000. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Cushman 2 cyl, complete with trans, brake assembly, & pto with sprocket, $250; WF Henderson nnn-nnn-nnnn (Sheridan OR)

Cushman Cub 2 hp, runs good, $275; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Cushman Cub 3 hp, very nice all original engine, runs great, $650; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Economy 6 hp. 1926, restored, runs great, excellent condition, $1400. Meyers 6X6 bulldozer water pump, restored, a rare find, $800. See pic www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Engines: Owned and restored by Marsh Lampe. Located in Central California about 40 miles south of San Jose. Worthington water cooled hit & miss. International Harvester 1-hp Tom Thumb on a cart (circa 1912). Ruston 8 hp air cooled diesel, 1950. I have seen them run; appear to be in good condition. Email me and I will send more info and photos. I don't have pricing for all the engines; Patrick J. Lampe nnn-nnn-nnnn (Hollister CA)

Fairbanks Morse 15 hp tank cooled engine, 1925, on heavy wagon. 44" flywheels, unique water reservoir, $2,950; Terry Christner nnn-nnn-nnnn (Molalla OR)

Fairbanks Morse 2 hp Z Dishpan. Complete, running. Type R mag, $650; Mike nnn-nnn-nnnn (Cheney WA)

Fairbanks Morse 3 hp Z, 1920. Original, some paint, Complete in pieces, has AB-33 magneto $900; Mike nnn-nnn-nnnn (Cheney WA)

Fairbanks Morse 3 hp ZC, new gas tank, runs good, $550; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Fuller and Johnson 4 hp N-Kerosene, 1914 (Produced less than a year as a Kero model, switched to a type K, this is a true hit and miss type N.) Has preheater, gear guard, hand crank, etc, $2200; Mike nnn-nnn-nnnn (Cheney WA)

Fuller and Johnson 6 hp N, 1913 (First Year). Complete, original, crank guard, gear guard, hand crank, very nice, $2000; Mike nnn-nnn-nnnn (Cheney WA)

Gas engine Magazines most from 1976-79, and most from 1991 to 2002, and most from 2009-2010. The stack of magazines is about 4-5 foot high. $75 for all; Greg Fosmark nnn-nnn-nnnn or xxxx@xxxx.xxx (Issaquah WA)

Gas engines: Have several small used B&S and Wisconsin engines. Call for details; Bill Evans nnn-nnn-nnnn (LaCrosse WA)

Greene Mfg. Co, Providence, RI. Twin in box frame. Miniature, cylinders size 3" x 4," made by Greene to show his unique quick cut-off mechanism during patent battle against Corliss, who had been granted a patent that covered ALL quick cut-off mechanisms. (Corliss won, but only for a few years, after which Green began to produce. The mechanism has "teeth" that trip other "teeth" to actuate the valves, and they are adjustable.) This relic has been in need of restoration for a long time. It was cannibalized, but fortunately the cannibal left one of everything that needs re-making. Fascinating historical piece for the right guy. Images available, $9000 obo; Pat Spurlock nnn-nnn-nnnn (Portland OR)

Hicks heavy duty marine gas engine, model DY. One cylinder. Complete and operational. No saltwater exposure. Stored dry with light oil. Has reverse, magneto, pumps, and all parts and covers. Original paint. Literature. Images available via web. $5500 obo; Pat Spurlock nnn-nnn-nnnn (Portland OR)

John Deere type W-111 runs good, starts with a few spins. These are getting hard to find! $3650; James Lutterman nnn-nnn-nnnn or xxxx@xxxx.xxx (Cedar City UT)

John Deere W, circa 1939. Clutch rebuilt. Looks and runs good. I have the operating manuals as well. Will email info and photos, $5,000; Patrick J. Lampe nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA)

Leroi 2 cylinder, 2P-7 Milwaukie Wisconsin 3-1/2" stroke with 2-7/8" bore. Needs carb & magneto, $200 or make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

McCormick Deering 3 hp M, igniter fired, old restoration, on homemade cart, runs good, $750; Mark Bruto nnn-nnn-nnnn (Placerville CA)

McCormick Deering 3-5 hp LB, complete, new gas tank and muffler, runs good, $375; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Murphy diesel engine model 11? Big 4 cyl. complete fan to clutch, ran last month, out of a Northwest crane model 25. Includes Murphy radiator. Very good condition, weighs about 5-6000 pounds, $5000 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Regal Marine gas engine, 4-6 hp, 4-stroke cycle. Like new with original "regal" blue paint. Seems to have been installed in a boat, telling by set-screw marks on out-put shaft, but not for long. Beautiful brass fittings. Perfect condition; no scratches or wrench tracks. (Hype: Stored under a boat shed bench on Lake Union, Seattle, until purchased by Bill Durham fifty years ago.) With reverse gear, manifold heater, muffler, and propeller, $3500; Pat Spurlock nnn-nnn-nnnn (Portland OR)

Sparta Copper Economy 4 hp, 6” stroke, 4” piston. On cart, no tag. Great condition, $1400. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Stickney 7 hp engine, made in 1913, older restoration. This engine has the correct fuel pump and rare clutch pulley assembly. It is sitting on homemade skids and comes with one extra reproduction igniter. I have a forklift to help load it. No trades please, $14,000; Terry Christner nnn-nnn-nnnn (Molalla OR)

Stover 18hp, 1917, screen cooled portable, on correct Bettendorf trucks, throttle governed, kerosene version, easy to start engine but hasn’t run for a few years and will need some plumbing fixes before running again. Currently using sparkplug and buzz coil for ignition, but I do have a correct ignitor bracket for a Webster Tri-polar, $11000 or may consider interesting trade for something smaller; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)

Stover CT-2 hit & miss, runs good, $600; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Tiny Tim generator / battery charger. Very neat, rare setup, $800; Mike nnn-nnn-nnnn (Cheney WA)

Tom Thumb hit & miss on a cart. Great shape. Email for more info and photos, $1200; Patrick J. Lampe nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA)

Wisconsin TFD. Complete, un-stuck, $100; Mike nnn-nnn-nnnn (Cheney WA)

Wisconsin VB4 4 cylinder engine, complete, $50. Detroit 6 hp, complete, $500; Robert Adams nnn-nnn-nnnn or xxxx@xxxx.xxx (Fresno CA)