April 2014 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers 1934 WM, valves ground, tracks good, 15" pads, replaced steering clutch discs and crank start. Sand blasted and painted, $2300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers 1937 WM, valves ground, cylinders honed, rebuilt carb, several steering clutch plates replaced, electric start, sand blasted and painted, $2750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers B, 1940. Older Restoration. Ran great but now will not start after sitting and have no time. Hand crank only. Engine fully rebuilt and very low hours. Brand new tires. has PTO and hydraulics, foot brakes. All original save for temp gauge, steering wheel, and tires. $900. May part for right price; Lars Nielsen nnn-nnn-nnnn (Sandy OR)

Allis Chalmers B, hand crank, partially restored, some spare parts, $500 obo; Brian nnn-nnn-nnnn (Ellensburg WA)

Allis Chalmers B, not currently running, needs water pump, $1000; John Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)

Allis Chalmers B, restorable, $450; Philip S. Robustellini nnn-nnn-nnnn or cell nnn-nnn-nnnn or farmallf12 @att.net (Montague CA)

Allis Chalmers C, 1948, 2012 restoration, rebuilit engine & clutch, tires 95%, must see to appreciate, $2195 obo; Bob Bowman nnn-nnn-nnnn (Sheridan OR)

Allis Chalmers D-12, with sickle mower, runs great; Jerry nnn-nnn-nnnn (Gaston OR)

Allis Chalmers G, nice original tractor, $2500; please call or text Jim nnn-nnn-nnnn (Benton CA) [link to photo]

Avery A, 1948, single front wheel. Has original type Montgomery Ward tires on rear. Tires are in good condition. Nice non-restored tractor, runs great, $1200 obo; Mike's Tractor Ranch nnn-nnn-nnnn or nnn-nnn-nnnn (Albany OR)

Case 1190, diesel, runs, parts tractor, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Case 995, runs, $3500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Case D, 1952, live pto hydraulic; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Case DC4, 1953, with foot clutch. Also used parts for VA, S, D & LA Case tractors; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Case G 320 W tractor, loader, backhoe, sn 6088423, very rare. Only about 53 made. Running condition, in restoration process. Buy it now for $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case Manuals, all prices postpaid. 580 Construction King, Parts, 11/68, 193 pages, good+, $25. 580 Backhoe 33 & 33S & 33 Loader, Parts, 6/69, 179 pages, good+, $25. 300B - 400B series tractors, Parts serials 6095009 up, 5/58, 197 pages, good+, $25. Utility Loader for models 210B, 310 & 310B Tractors, Parts, 11/60, 48 pages, good+, $20. Backhoe for 310 & 310B Tractors, Parts catalog A641 after #4068724, 12/59, good, $20. Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Case round nose 300, very nice unrestored tractor complete with Eagle hitch, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case SC. New mag. Good rubber on rear. Runs good. $600 obo; J & J Tractor Restoration nnn-nnn-nnnn (Albany OR)

Case tractors: Case LA, 1947, new rear tire, runs good, orig. condition, flat lensed lights, rebuilt starter and battery cables and new deck installed, $2500. Case CC, 1938, original condition, runs good, fair tires, $2500. Case C, 1929, on steel, restored. Original flat belt water pump, $2500. Will consider trades-what have you got ??? to see pics. go to www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case VAC, 14 adjustable wide front, eagle hitch, pto, hole auger, three point post pounder, $2500; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Case VAC, wide front, new tires, very good running condition, $1500; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [link to photo]

Case VAO, fair rubber, needs a few pieces of tin, but all there & restorable, not stuck, $500 obo; Brian nnn-nnn-nnnn (Ellensburg WA)

Case VC parts tractor. No tires. Perfect grill. Ran when parked, now it is stuck. Scrap metal price $250. Save this one from the scrapper; J&J Tractor Restoration nnn-nnn-nnnn (Albany OR)

Cast iron front wheels for John Deere H, $100 pair; Gene nnn-nnn-nnnn (Davenport WA)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 15 gas 1934 hyd blade. 95% U/C, runs good, have good orig gas tank, $1500. See pics at www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Caterpillar 2 ton, 1926, easy to start, has all sheet metal, $2000 obo; Alan Langmuir nnn-nnn-nnnn (West Sacramento CA)

Caterpillar 22 carb $50. 3 Cat tool boxes, $20 ea. Electric start for pony motor, $225. 2 track roller grease guns, $50 ea; nnn-nnn-nnnn or email xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar 22, have two: one Orchard & one Logging complete. Both stored in the dry; Marv nnn-nnn-nnnn (Salem OR)

Caterpillar 30, $3000; Jim Messick nnn-nnn-nnnn (Linden CA) [link to photo]

Caterpillar 6G series wide gauge thirty. Have had engine running, have not driven tractor. Tractor is mostly complete, comes with belly pan, and an extra radiator. Undercarriage fair, sheet metal fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 items: 2 D2 seat tanks very nice (Early), $250 ea. D2 PTO complete, $275. 3 D2 lights, $25 ea. 4 D2 track wrenches $40 ea. D2 track adjuster covers, used, $150 pair. D2 engine side panels, new, $250 pr; nnn-nnn-nnnn or email xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D-2. 5J series wide gauge tractor. Top seat model. Tractor runs good, undercarriage good, $2000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D8, 1950's vintage: Awesome machine for an orchard or farm. A large tractor capable of effortlessly pulling stumps, or tilling / moving large quantities of soil. Also has a drawbar for towing implements. Large adjustable angle blade. Heavy duty built in winch. Runs well, complete with manuals. Weight is approximately 40,000. Cable operated Blade is 13'5". Pony motor for starting; Don nnn-nnn-nnnn (Copperopolis CA)

Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95.00. Photos available by e-mail. Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

Centaur tractor, 1929, used for placer mining/belt work, to run a water pump, nice condition, $1950; Terry Christner nnn-nnn-nnnn (Molalla OR)

Cletrac AD 1936 Hercules diesel, hydraulic dozer (Issacson), valves ground, cylinders honed. Diesel pump gone through and adjusted, starter gone through, steering bands replaced, good tracks, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda diesel, valves ground, starter gone through, diesel pump cleaned and gone through and adjusted, set for pressure. Sand blasted and painted. Cylinders honed. Good tracks, $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac HG, small dozer, almost identical to the Oliver OC3, has nice blade, PTO unit, been sitting for years and motor is stuck. Has very good undercarriage, 95% complete, $1250 as is, no problem loading; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cockshutt 30, 1947, restored, runs great, $2250; Al Barkl nnn-nnn-nnnn (Elko NV)

Complete front end off Ferguson tractor; Charlie nnn-nnn-nnnn (Yakima WA)

Co-op E3, 1946, early model, runs & drives great, restored, $2450; Al Barkl nnn-nnn-nnnn (Elko NV)

Coop E3, live pto hydraulic, runs; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Earthmaster B. Runs good, has battery box cover and extra set of rear tires. Grille is in perfect

Condition, $1000 obo; Jack Muirhede II nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Ensign carbs for Cat 20, 30 all rebuilt $450. D2-D6 battery box covers with thumb screws $80. D2 engine side panels $195 per pair. D2 track adjuster covers new $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 200 with loader, blade, disc, and plow. Equipment is all factory 2-pt and in excellent condition. All for $3500. Can send pictures; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Farmall 300, wide front, tin & tires good, runs very good, dual hyd, front & back. Reduced to $2000; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [link to photo]

Farmall B, 1941, sn 56011. Narrow front, new rear wheels, great tires all around, runs really well, non-restored. Great tin. Great project or work it or just enjoy it, $1500 obo; Mike's Tractor Ranch nnn-nnn-nnnn or nnn-nnn-nnnn (Albany OR)

Farmall Cub parts: call with your needs; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub with sickle mower and blade; Jerry nnn-nnn-nnnn (Gaston OR)

Farmall Cub, 1950 white demonstrator. Currently painted red, but shows signs of white paint under the red. Serial number also confirms a demonstrator. Included is a belly mount finish mower, 1 bottom plow, and a sickle mower. Tractor is in very good condition, very good tires. $2600; Dan Tombrink nnn-nnn-nnnn (Columbia Falls MT)

Farmall H with loader in front with bottom blade, $1600; Charlie nnn-nnn-nnnn (Yakima WA)

Farmall H, wide front end, good tires & tin. Used to bale hay. Runs very good, reduced to $1500; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [link to photo]

Farmall M, H, C, B, A and Cub parts; tell me what you need; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall parts: Farmall H drawbar, Farmall fast hitch drawbar, Farmall Monroe seat H & M complete, no cushion, misc Farmall parts; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super A, 1954, sn 349510. 4-speed, super runner, great for parade. Paint fresh, tires match, priced right, photo on request; nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Chico CA)

Farmall Super A, barn fresh. Been in covered storage for 2 years, nice tractor comes with donor tractor with sickle bar mower, $1750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Super C, 1952 with wide front. All original barn fresh. Has aftermarket 3 point, cultivator lift, rear wheel weights, fenders and woods belly mower, $5000; Chad Enyeart nnn-nnn-nnnn (Laramie WY)

Farmall Super H, 1954, overhauled engine, runs & drives great, is restored like new, $5300; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M, 1953, with F-11 loader, rear chains, new front tires, $2200; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall W6, gas, wide, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Ferguson TO 30 parts tractor. Chassis only, no rims, some tin. Loading available. Make offer; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Ford 2N, 1946, 3pt., new paint, extra set of rear tires, runs good, $1400. See pics at www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Ford 600 series hydraulic pump side mount on engine, $75; WF Henderson nnn-nnn-nnnn (Sheridan OR)

Ford 850 with loader. Excellent condition, older restoration, but very clean, $5000; Bob nnn-nnn-nnnn daytime (Orange CA) [link to photo]

Ford 860 Special front fender, hydraulic clutch, deluxe seat, new tires, restored; Jim Galen nnn-nnn-nnnn (Bellingham WA)

Ford 8N parts; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N, 1948. Good usable condition, starts and runs good, converted to 12 volt, sheet metal recently painted, tires fair with good tread, hold air, but weathered, hydraulics good, $1495; Tom Devlin nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR)

Ford 8N, have two, rebuilt, no hydraulic work done, $3500 each; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, have two. One has Sherman trans, one has Howard trans with side mount distributor. Both for parts or restore. Will part out. Call for prices; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

Ford 8N, sn 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original). Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N, very nice amateur restoration, 4 speed, $3500; Jim nnn-nnn-nnnn (Benton CA)

Ford 901 Selecto speed diesel, restored; Jim Galen nnn-nnn-nnnn (Bellingham WA)

Ford 9N industrial bare block (engine), $150; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford Dexta Orchard, was running when parked in the dry a few years ago. Has large, wide low pressure rear tires; Marv nnn-nnn-nnnn (Salem OR)

Ford NAA with Sherman three-speed aux trans. Looks good, runs good. New clutch, live hyd, $3000; Robert C Pierce nnn-nnn-nnnn (Omak WA)

Fordson N tractors, have 2. One is older restoration '29-'30, one is in need of restoration '24-'26; Jim nnn-nnn-nnnn (Benton CA)

Fordson Super Major, collector’s item, diesel, wide, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Fordson tractors, 1922 and 192?, both run & complete, on steel with rear fenders. Will trade both for a running Model T pickup or Model A pickup; Kevin Alden nnn-nnn-nnnn (Walnut Creek CA)

Gambles Farmcrest 30, 1948, drives & runs great, restored, $2350; Al Barkl nnn-nnn-nnnn (Elko NV)

Hood, grille & other misc. sheet metal parts for some sort of Case "Tripl-Range" tractor. Call for details; Daniel Morgan nnn-nnn-nnnn or xxxx@xxxx.xxx (Onyx CA)

Howard transmission, several bad gears, asking $200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

International ID9, starts on gas, runs on diesel. Wide front, dual back, good running condition, starts easily, 12V, $1800; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [link to photo]

International T6 crawler with hydraulic blade. This is a gas model. First year model, 1939-40. Runs good, all gears work. Clutches and brakes need adjusting, but still turns. Blade raises and lowers. Work it or restore it. I have a stack of manuals for it and some extra parts, $3,250 obo; Larry Valencia nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

International TD 6 crawler tractor with adjustable blade, runs good, good track condition, some extras, new decals, shop manual, track grease gun. email for pictures or call for more info; Michael Engstrom nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR)

International TD9, runs & steers, 22” pads & blade, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

International WDR9 All original condition. Excellent sheet metal. Complete except for one headlight. Starts on gas and runs on diesel. Local delivery. $2800 obo; J & J Tractor Restoration nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere 1945, hand start, like new, will start 2nd time on flywheel every time, $3295; Al Norwood nnn-nnn-nnnn (Indio CA)

John Deere 40 crawler, gas, winch, Yakima blade, $5000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR) [link to photo]

John Deere 40 tricycle, 1953. Older restoration. Had new head, valves, pistons, rings, bearings and tires 20 years ago when it was restored. Has lights and 3 point, $3000; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere 410 diesel with low hrs on engine, good rubber. Industrial loader tractor does not have a back hoe, good running loader tractor; Jerry nnn-nnn-nnnn (Gaston OR)

John Deere 420C complete engine with radiator. Good oil pressure, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420T, fully restored, runs and looks great, good tires, working hydraulics, pto, and three point, $4200. Email for photos; John Boehm xxxx@xxxx.xxx or see www.vintagetractors.com (Woodland CA)

John Deere 420U, 1957, sn 106102, restored. Wide front, 4 speed, PTO. Runs and drives good. New tires front, 80 to 90% rear. Rear wheel weights, 3 point with correct 3rd link. 4 year old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork. With restored 415-A 3 point integral (2-14 bottom) plow. New Tyler Buchheit points, extensions and trash boards. Bottoms are soft painted when not in use. Manuals and paperwork. Nice original set up. Everything works. $5500; Bob Folk nnn-nnn-nnnn xxxx@xxxx.xxx (Eastsound WA) [link to photo]

John Deere 435 with head off. Has remote hydraulic, spin out wheels and very little wear on front and rear tires. Restore or part out. Would partial trade for 420 or 430C, $3500; Jim nnn-nnn-nnnn (Santa Barbara CA)

John Deere 520 row crop, 3pt, hitch, runs, but not running now, $4000 or trade; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 60 tricycle with Yakima hitch, $1800; Charlie nnn-nnn-nnnn (Yakima WA)

John Deere 60N runs well, very good sheet metal, 3 point hitch, sn 6022526, $2000; Mick nnn-nnn-nnnn or xxxx@xxxx.xxx (West Richland WA)

John Deere 80, manual steer, 199 built, all exported but 3. This one shipped to Choteau, MT. Restored, $10,000; Gene nnn-nnn-nnnn (Davenport WA)

John Deere 820 Black Dash, both engines totally rebuilt, one new front tire and the rest OK but aged. Good tin except for repairable damage on lower rear of left fender. No pto, one hydraulic,& power steering, $9,500; Russell Turner nnn-nnn-nnnn (McArthur CA)

John Deere A, 1944, hand start, puller hitch; Jim Galen nnn-nnn-nnnn (Bellingham WA)

John Deere A, 1949. Roll-o-matic front end. Nice rear tires, good runner; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere AN, 1952, nice running tractor; John Deere BW, 1947. Turns over, ran last year. Needs a rear tire. New front tires. 45W loader mounted; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1942 with tip toe rear still, front steel with extensions. Nice original running tractor; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B, 1944. Parade ready, new tires, painted by Stetson family, hand start, recent carb rebuild, $3450; Terry Christner nnn-nnn-nnnn (Molalla OR)

John Deere B, 1948 parts tractor, fair tires. John Deere BN, 1949 long axel, engine taken apart, good tin & tires. John Deere B, 1952 Roll-o-matic, complete, good tin & tires, plus some extra B parts. Will not part out. Take all for $1800; Randy Wixsten nnn-nnn-nnnn (Butte MT)

John Deere B, 1949. Nice rear tires, new fronts; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B1545R cast rear wheels. Circa 1941 two piece 12 spline $300 ea, very heavy; Frank Stricklin nnn-nnn-nnnn or xxxx@xxxx.xxx (Silverdale WA)

John Deere D or GP water valve, $135; Buck nnn-nnn-nnnn (Greenville IL)

John Deere D, 1929 project. Has PTO Kay Bruner rear wheels, engine is free, has original mag and carb, radiator looks good, poor sheet metal, $750 or offer.; E & A Heavy Equipment nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond OR)

John Deere D, 1936, on cutdowns, complete, not stuck. Comes with BRAND NEW FENDERS & HOOD, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere front weights, T15577T and M2543T, for JD 40, 420, 430, $450 each; Allan Avery nnn-nnn-nnnn or xxxx@xxxx.xxx (Roseville CA)

John Deere G, 1947. Original running tractor. Early 47 with no batter box under the seat. Looks like a GM but the tag says G; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere GP clutch-belt pulley, NOS, $300; Buck nnn-nnn-nnnn (Greenville IL)

John Deere GPO, 1931 older restoration, but still very nice/paradable. Has fenders, new tires. Kay Brunner wheels all the way around with Kay Brunner weights on rear, $9500; Chad Enyeart nnn-nnn-nnnn (Laramie WY)

John Deere H, 1946, electric start, restored, very nice, reduced to $3975; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere H, late 1947. Has fenders, rear weights, hydraulic lift, electric start/lights and new tires. Older restoration, $6000; Chad Enyeart nnn-nnn-nnnn (Laramie WY)

John Deere HN, 1939. Older restoration, new Firestone rear tires; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere L/LA/H parts. Email for parts list. I will be at the Turlock, CA W.H.E.A.T. swap meet on March 9th. Let me know if you need something specific brought to the swap meet. Cell phone: nnn-nnn-nnnn; Patrick Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)

John Deere Lindeman dozer, complete, $1500; Gene nnn-nnn-nnnn (Davenport WA)

John Deere M Power-Depth-Control with mounting brackets. Have one, $125 obo; Daniel Morgan nnn-nnn-nnnn xxxx@xxxx.xxx (Onyx CA)

John Deere M, 1949, fresh from the blackberries, missing one back rim but have the tire, front tires shot but rims OK, small dent in hood, otherwise complete, $500; Jim Evans nnn-nnn-nnnn or e-mail to xxxx@xxxx.xxx (Gales Creek OR)

John Deere parts: Rear belly pan for John Deere 440 crawler, and a new brake band fits JD 440 or 420 crawler. $200 both; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere R, restored, with new brakes & clutch. Put over $10,000 in restoration, will sell for $9000; Doug Knight nnn-nnn-nnnn (Pendleton OR)

John Deere R, sn 17846. Both engines run well. The family I bought this from seldom used the starting engine due to not being able to get it to work consistently during the 30+ years they owned it. Consequently this starting engine has far less hours on it than you would expect. I bought it in 2002 and in 2007 started the starting engine and it has started the big engine every time. This tractor needs tires, the existing tires hold air but are bald. Also have a partially dismantled R, sn 16673. I started at $4500 for both, I am down to $3000 for the two. This is getting close to scrap price and I am getting close to going that way. Grab them now or I may start parting out and scrapping. Give me your phone # and parts needs and if I decide to part out I will contact you after I see what the response is like; Jim Temple nnn-nnn-nnnn (Noti OR) [link to photo]

Kubota L295 parts, call for availability and price. Also have used loader off L295, $1750; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Light bar for John Deere H, totally restored, $40; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Lindeman BO crawler, been in same family all its life, not running but very good condition throughout. Good sheet metal, good undercarriage, tracks very good, not all broke and welded, in fact did not see a weld on it, 99% complete, been sitting in a barn for many years. Motor is stuck. Steered both ways when we pulled it out. Serial number 335798, very nice machine. Call for Pics. $4500; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Magneto for Cat D2 and D4 starting motor, $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 135 gas, power steering, good rubber, good sheet metal, live PTO, 3 pt., low-high transmission for tilling, $4250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Ferguson 35, diesel, runs, needs steering gear, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Ferguson 65, bad engine, tri-cycle, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Ferguson 85. Has good tires, paint is good, square belly mower, don't know if it runs, $6000; Ruth Walker nnn-nnn-nnnn (Chewelah WA)

Massey Ferguson hood, side panels, gas tank, 30-50 model (?) $225; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Massey Harris 44, wide, gas, has grill, $1500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Harris 555 LP, 1957. Rare tractor, 51HP, runs well, good sheet metal and tires, needs paint, $3250; Terry Christner nnn-nnn-nnnn (Molalla OR)

Massey Harris Pony. Used parts now available; John Boehm xxxx@xxxx.xxx or see website http://vintagetractors.com (Woodland CA)

McCormick Deering W-12, 1936. Runs great. $2000 obo; Kevin Schindler nnn-nnn-nnnn or xxxx@xxxx.xxx (St Paul OR)

Minneapolis Moline R 1939 engine and rear end are stuck. Low production, 108th one built. Good for parts or to restore, $350 firm; Ben Lyon nnn-nnn-nnnn (Gig Harbor WA)

Minneapolis Moline RTU, 1941. New tires, runs, nice paint job, parade ready, $2400 obo; Bob Jordan nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

Minneapolis-Moline parts counter book holder and books. Parts books and Assembly, Operation and Maintenance manuals covering tractor mowers, mid mounted and trailer, pull combines and self-propelled. UNI-Harvester model LA, various attachments, several Windrowers, Corn shellers, huskers, picker huskers. Forager, Bale-O-Matic, Planter and several types of grain drills, and a hammermill. There also are about 2" of M-M Service Bulletins, practically all of the material is dated in the 1950s. When the books are spread out, the unit is about two and a half feet wide, The books and holder are in very good condition. $125 plus shipping; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Oliver 77 orchard 52 model, missing some sheet metal. Motor not stuck, 6 cyl gas $1100; Bob Cartwright nnn-nnn-nnnn (Upper Lake CA)

Oliver 880 Industrial, 1961. Has 2440 original hours on hour meter. It starts, runs and drives excellent. Has 20'' front tires and 38'' rear tires. Rear tires and rims are not original, but are in excellent shape. Front and rear tires are poor but hold air. Have set of good used rears to go with it. Has a heavy duty front axle and drawbar. Sheet metal is good. It would make a nice puller. Can be delivered to Tulare Antique Show, $3500 obo; Daniel Morgan nnn-nnn-nnnn xxxx@xxxx.xxx (Onyx CA)

Oliver Hart-Parr 28-44, 1937, predecessor to the Oliver 90, with complete Scout backhoe attachment made by the Shawnee Manufacturing Company of Topeka, KS and hydraulic front end loader. It has approximately 1500 lbs. of iron wheel weights that go too. It was running when parked several years ago, but needs manifold work, $3,000 obo; Ryan nnn-nnn-nnnn or xxxx@xxxx.xxx (Ellensburg WA)

Oliver HG 68 (wide track) crawler. Very collectible and has blade and PTO. Very good under carriage and tracks. Smokes some when it first starts but it runs and starts good. Rebuilt starter and mag. This style crawler is very desirable, $1200; Jim nnn-nnn-nnnn (Tacoma WA)

Oliver HG transmission, $285; Charlie nnn-nnn-nnnn (Yakima WA)

Oliver Row-Crop 66 WF, 1953. Runs & drives great. Fully restored in 2002 with new gauges, tires and many other new parts. Beautiful tractor. Will be on display at Tulare Antique Show. $4800 obo; Mike Morgan nnn-nnn-nnnn or xxxx@xxxx.xxx (Onyx CA)

Oliver starters: have 2 used 1365 Oliver Starters, (do not know if they work), $100 for both; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Parting out several tractors: Minneapolis Moline M5 diesel. Massey Harris 65 gas. Allis Chalmers Monarch 35 K. Caterpillar 30. Caterpillar 10, mostly castings; Buck nnn-nnn-nnnn (Greenville IL)

Parts: John Deere two cylinder crawlers and Oliver OC3 crawler parts: sprockets, sheet metal, finals, some engine parts, starters, mags, etc, just lots of misc parts, sell one or all; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Radiators: several honey-comb radiators, $150 each; Al Norwood nnn-nnn-nnnn (Indio CA)

Rebuilding Ford 9-2-8N tractor engine front distributor; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Rims: have two rear steel wheel extension rims for John Deere D, $150; Dennis nnn-nnn-nnnn (Hillsboro OR)

Rims: two rims for Farmall 200 or whatever else they may fit. Rims have never seen chloride, $335 each or make offer. Shipping available; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Sherman combo trans for Ford N series, $1250, rebuilt. Rebuilt Sherman step up, trans for Ford N series, $895; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Silver King, 1937, restored and running, Email for photos; John Boehm xxxx@xxxx.xxx (Woodland CA)

Struck Mini dozer, bulldozer, haul in back of pickup. Has good undercarriage. Manual angle blade with easy manual up and down. Engine not running and just sitting in machine, easy to work on, uses 8 HP engine. Appears to have new belts, Very neat little unique machine. $1600 Can load ; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Tires: 12.4x28 tractor tires, have two, $400; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Tractor tires with tubes: Two 13.6 X 38, 95% tread, $450. Two 6.50 X 16 with 95% tread, $140; Pat Geary nnn-nnn-nnnn (Gardnerville NV)

Tractors for sale, no further info given: Gibson E. Graham Bradley. Rumley 20-35 Oil Pull. Cletrac. Allis Chalmers 20-35. Lindeman wide-gauge BO. Minneapolis 17-30 B. Hart Parr 12-24. Many parts tractors. Call nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Wagner WD9, new tires, good sheet metal, 4 cyl Cummins, call for more info, $10,000; Gene nnn-nnn-nnnn (Davenport WA)

Wehr motor grader, Case L powered, heavy 12 ft blade, $2000 obo; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Wheel weights, extra heavy, for Minneapolis Moline M5, $200 pr. Front wheel weight bracket for 4-star, $100. Front Minnie weights, $50 each. Rear wheel weights off of Case V, $200 pr; Buck nnn-nnn-nnnn (Greenville IL)

Wheel: One rear wheel for a John Deere early styled B tractor. Wheel is flat spoked, 36"x8". The hub is a bolt-in hub with 12 splines. I can take it to Salt Lake City where it can be shipped from YRC Trucking Co. $750; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Wheels: Massey Harris 44 skeleton wheels with lugs, some welds, $600; John Deere 12 spline tip toe wheels, some welds, $600; Gene nnn-nnn-nnnn (Davenport WA)

Winch: Hyster winch to fit Cat 30, double drum, best offer; Gene nnn-nnn-nnnn (Davenport WA)

Zetor 8145, bad engine, 4x4, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)