June 2014 - Vehicles

All Classified Ads

1915 Metz model 22 roadster, all original. Barn find. Chain drive. Gas head lights. Runs good, $10,000 cash firm. Call for more info; David Traver nnn-nnn-nnnn (Placerville CA)

1935 Ford truck parts: 1 front bumper, $75. 1 vac brake kit, $125; Don nnn-nnn-nnnn (Homedale ID)

1946 Chevrolet project street/driver. Cab, hoods, fenders, bright grille setting on 1983 Chev S-10 extended cab chassis. Titles for both. Various engines available $1,000; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn eves (Dayton WA)

1948 Chevy flatbed dump, 2 ton, pto twin hoist, wiring updated, all gauges work , 4+2 spd. currently has a 270 (6), have 235 core. New seat cover. Picture available. Nice truck, $1,000; William Ebrecht nnn-nnn-nnnn or xxxx@xxxx.xxx (Spokane Valley WA)

1949 Studebaker 1-1/2 ton Model 2R16 with 12 St. Anthony flatbed. Commander engine with 4 speed transmission. Solid Eastern Washington truck. Good for total restoration, all complete. 7.50x20 tires, $1,250 firm; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn eves (Dayton WA)

1951 GMC HCW404 Tandem Drive Short logger. 270 engine, 5-3 Transmission. Runs and moves on its own. Has rust in the cab. Is very complete and original, $3000 obo. Maybe trade for old Kenworth truck or John Deere tractor. Can email pix; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

1956 Buick Century 4-door hardtop. 55000 original miles, new paint, red & black, tires, radiator, heater core, drive anywhere; Don Eckelberry nnn-nnn-nnnn or nnn-nnn-nnnn (Noxon MT)

1956 Mack B42 gas engine, runs. Cab is in good cond. Tandem axel rear suspension needs rebuilt, truck needs restoration, $2000 obo; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)

1962 International R 200 single-axle tractor, 5+3 spd, 450 ngas twin chrome stacks, super straight body, dual side tanks, excellent bang board, shines up really nice. Running when parked. Comes with 32 foot drop deck flatbed trailer, 8 ft dry van box on nose of trailer. Haul your tractor or team in style, dry storage/shelter too. Pictures available. Must go together, $2500; William Ebrecht nnn-nnn-nnnn or xxxx@xxxx.xxx (Spokane Valley WA)

1963 Chevrolet 1-ton 4-speed trans with E brake (trans only); Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1963 Chevrolet Corvair Corvan, not running. Many Corvair parts, mostly forward control items; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1963 GMC 4000 truck with 6000 lb boom; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1964 Cushman Truckster, street legal, California non-op 4 wheel hyd. brakes, 3 door enclosed body, good condition, $2000 or make me an offer; Dan M Rocha nnn-nnn-nnnn (Selma CA)

1964 GMC items: 3/4-ton 4-speed trans (trans only). 64 narrow long box with tail gate, no fenders, and 64 radiator; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1965 Crown Coach, original 220 hp, mid-engine Cummins diesel, manual trans, single axel, low miles. Mechanically sound, aluminum body. Interior wiring/lighting full length generator compartment underneath (no generator). Endless possibilities for conversions: RV, haul antiques,

bikes, ATV, etc. The rear section could be cut out under the existing hinged rear window and a ramp/hoist installed. Has flat floor front to rear; Dennis nnn-nnn-nnnn (Carmichael CA)

1966 IHC 190 Cabover. Excellent cab, glass is good except crack in wind shield. 6 cyl. gas runs good has crack in exhaust manifold. long frame. Truck would make good car /tractor hauler 5spd with 2 spd. Rear, 10.00-20 tires, Budd wheels, $1800 obo; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)

1973 Dodge 1-ton cab & chassis, 400 cu engine, 4 speed trans, needs clutch and carburetor, $1500 or make offer; Dan M Rocha nnn-nnn-nnnn (Selma CA)

1976 Cadillac Coupe DeVille 2 door hardtop. 500 cubic inch engine. Mag wheels with original steel wheels with hub caps. Body very good with 3 year old deep green paint. Lite Brown leather original interior. Runs well needs some TLC, $3,500 obo; Earl Ming nnn-nnn-nnnn (Sandy OR)

1976 Kenworth dual drive with Swartz machinery bed with winch, 351000 original miles, 8V92T engine with 13 speed miles, very nice truck, reduced to $25500 or offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

1979 Corvette, engine strong, new carb, dist rebuilt, rebuilt t-tops; all alum exhaust, burgundy red leather seats, interior reupholstered, new brakes, classic plates, NICE CAR, $14,000 invested, asking $11,000; Phil Wall nnn-nnn-nnnn cell or nnn-nnn-nnnn (Enumclaw WA)

1979 Ford F700, 370 4v engine rebuilt 5 speed trans, rebuilt rear differential, 18 ft van box; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1981 Isuzu diesel pickup, 2 wheel drive, 5 speed, 30 mpg. Runs good, tires are good. No rust, $2300; Robert C Pierce nnn-nnn-nnnn (Omak WA)

Chevrolet body (old) fenders are good. Had 4 cyl engine, year ?? Price is right; Bill Evans nnn-nnn-nnnn (LaCrosse WA)

Coot ATV, amphibious 4 wheel drive. Totally original engine has no spark. Has optional propeller and factory rudder and roll bars. Google Coot ATV and see YouTube videos, $1075; Don Chappell nnn-nnn-nnnn (St Helens OR)

Flat fender Willys Jeep parts: transmission, transfer case, front & rear end, radiator, grill, engine, more; Wes nnn-nnn-nnnn (Goldendale WA)

Ford Model T parts for sale; Dave Gallant nnn-nnn-nnnn (Boring OR)

Jeep CJ2A & CJ3A parts: Two front springs, new, $150 pair. Two side steps, $50. Four front U bolts, other misc parts; Don nnn-nnn-nnnn (Homedale ID)

John Deere Gator AMT 600. 5x4 has hydraulic dump bed, excellent tires, new battery, $2250; Don Chappell nnn-nnn-nnnn (St Helens OR)

Model T parts: Gas tank for 1926-1927, $75. Five good wooden coils, $75. new unopened point set for wooden coils, $35. New unopened capacitor set for 4 coils, $5. Polar Bear aftermarket water pump, $50. Ford Jack $35. Brass Ford tire pump, $40; Ernest Phillips nnn-nnn-nnnn (Coquille OR)

Model T truck frame with worm gear drive rear axle. Price is right; Bill Evans nnn-nnn-nnnn (LaCrosse WA)

Samson trucks. I have 2 Samson trucks, one is mostly complete with wooden C cab. The other is an engine, radiator, transmission, chassis, and axles. Both trucks would need a full restoration, they are both somewhat apart. They are both the smaller 3/4 ton model. One could be built from the two, $4500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Truck parts: Wrecking 1962 Kenworth, lots of good parts. Cab is good, 5-29 ratio SQHD. Wrecking middle-50's Kenworth 262, was running when parked, 6sp main, 3 sp Brownie. D5380 rears 460 ratio. Sell all or part. Wrecking late 50's White 4000% 175 Cummins 5 sp main, aux missing, worm rear ends, good cab & fenders & radiator, several KW butterfly hoods. All or part. Get them soon or they will be in the scrap yard; Jim Transue nnn-nnn-nnnn (Cromberg CA)

Vehicle parts: 1947-56 Chev and GMC fenders, hoods. 1941-46 Chev cab, hoods, fenders. 1959 GMC truck Series 350 bright metal grille and bumper, hood, fenders. 1954 GMC 450 hood, fenders. 1973-80 Chev/GMC doors, hood, fenders, windshield. Call with your needs; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn eves (Dayton WA)

Wanted: 1999-2002 Ford F350, Powerstroke, 4x4 Pickup clean. Low mileage, extended cab, dually or single wheel; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Wanted: Jacobs engine brakes for small bore 743ci engines. Model 20's. Would like all mounting parts, crossheads and the brakes themselves. Email with list of what you have. Also interested in old Cummins engines and parts, pre 1964; Jake Winn nnn-nnn-nnnn (Albany OR)

Wanted: Kenworth Truck parts wanted, Pre-1950 parts, pieces, books. Especially looking for pre WW2 stuff. Email with pix and prices; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Wanted: Looking for tires for vintage Dodge and Chevy Coupe size 600x16 in good shape or better yet would take radials equivalent to this size; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Wanted: Peterbilt bubble nose truck. Looking for a Peterbilt 280/350 bubble nose cab over truck; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Wanted: two axle dump trailer to haul behind pickup, even if needs work, approximately 7x12 foot but will consider otherwise, willing to travel in Washington/Oregon; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)