July 2014 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1950, restored. Reconditioned engine, new bearings and seals in the transmission/differential, new brakes, new tires, paint and decals. All systems work including the PTO, hydraulics and electrical system, stock 6V. Only thing missing are the lights. Over $4000 invested. Pictures on request. Let's make a deal; Dennis Kytola nnn-nnn-nnnn (Ridgefield WA)

Allis Chalmers B, hand crank, partially restored, some spare parts, $500 obo; Brian nnn-nnn-nnnn (Ellensburg WA

Allis Chalmers G, 1948. Nice original tractor. Has a homemade box blade mounted and comes with the correct cultivators. Nice tires. Low serial number, $3000; Chad Enyeart nnn-nnn-nnnn (Laramie WY)

Allis Chalmers G, 1949, sn 22330. Rubber very good, excellent running, Continental engine, front weights, hydraulics, belt pulley, ready for tool bar, parade ready, $3700 obo; Stu Wade nnn-nnn-nnnn (Chico CA)

Allis Chalmers M, BeGe hydraulic pump, adaptor for small size pump. Also clutch inspection cover, $100; Irvin Baker nnn-nnn-nnnn (Ripon CA)

Allis Chalmers Monarch 35 belt pulley attachment, $800. Also parting out AC Monarch 35; Buck nnn-nnn-nnnn (Greenville IL)

Allis Chalmers WM, 1934, valves ground, tracks good, 15" pads, replaced steering clutch discs and crank start. Sand blasted and painted, $2300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers WM, 1937, valves ground, cylinders honed, rebuilt carb, several steering clutch plates replaced, electric start, sand blasted and painted, $2750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Bare block Ford 2N, 8N, or 9N, $50. Crankshaft for Ford standard journals for 2, 8, or 9N, $185; David Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

Case 1190, diesel, runs, parts tractor, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Case 1953. Has good tin & will fire, but not run. Probably has a gummed up carb from sitting so many years. Email or text me for pictures, $800; Paul Young nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)

Case 300 triple range, older, but runs, looks good, round nose, wide front end, $1200, part trade? Eric Bygness nnn-nnn-nnnn (John Day OR)

Case 995, runs, $3500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Case DO, 1951. Electric start. Starts easy. Runs and drives good. New exhaust elbow and pipe, fresh oil, filter, and anti-freeze, $1650 obo. Would consider trading for vertical Stover or Fairbanks-Morse hit & miss engine; Ray Harry nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

Case round nose 300, very nice unrestored tractor complete with Eagle hitch, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case SC narrow front. Good mis-matched rubber on the rear. Runs and has a new magneto, $500 or offer; Jack Muirhede II nnn-nnn-nnnn (Albany OR)

Case SC, mid-40's. Needs tune-up. Was running when parked. New front tires, rears very good, $750; Ed Bring nnn-nnn-nnnn (Molalla OR)

Case VAC parts, too many to list. Call with needs; Steve Zane nnn-nnn-nnnn (Paynes Cr. CA)

Case VAO, fair rubber, needs a few pieces of tin, but all there & restorable, not stuck, $500 obo; Brian nnn-nnn-nnnn (Ellensburg WA)

Case VAO, wide front, loader, 3 pt, runs very good, nice little tractor, $2000; Don Eckelberry nnn-nnn-nnnn or nnn-nnn-nnnn (Noxon MT)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 22 carb $50. 2 track roller grease guns, $50 ea; nnn-nnn-nnnn or email xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar 6G series wide gauge Thirty. Have had engine running, have not driven tractor. Mostly complete, comes with belly pan, and an extra radiator. Undercarriage fair, sheet metal fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D-2 5J series wide gauge tractor. Runs good, has a hydraulic bulldozer blade, brand unknown. Undercarriage fair. Located in Eureka NV, $3000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D-2 5J series wide gauge. Runs good, undercarriage good, $2000; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2, 1949 wide gauge, sn 5U 2350, nice shape, very straight, runs good, $3500; Dee Schuyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Lompoc CA) [link to photo]

Caterpillar D2, narrow gauge parts tractor, sn 4U 316. Main eng stuck, mostly all there, no hood, $700; Dee Schuyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Lompoc CA) [link to photo]

Caterpillar D25U with angle blade. electric start on pony. The main motor, steering brakes and clutches all good. Undercarriage good. Had it running a few months ago but now pony won’t start, $1800; Bob nnn-nnn-nnnn xxxx@xxxx.xxx; Bob Stere nnn-nnn-nnnn (Hillsboro OR)

Caterpillar D-7 3T series, 1948. Runs very good. Has electric start pony which runs well. Has hydraulic assist steering, and forward/reverse lever. Undercarriage is good, grousers are a little low. No attachments, $4250; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar items: Two D2 seat tanks very nice (early), $250 ea. 1 ea D2 light, $25. One D2 track wrenches $40. 1 D4 track wrench $40. Cat 22 carb, $50. Two track roller guns, $50 ea; nnn-nnn-nnnn or email xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar Twenty Eight topseat standard gauge. Engine free, not running. Manifolds & carb are rough, but possibly useable. I have a new drop tube manifold part for it. Sheet metal is fair, undercarriage is fair, $2000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Cletrac AD 1936 Hercules Diesel, hydraulic dozer (Issacson), valves ground, cylinders honed. Diesel pump gone through and adjusted, starter gone through, steering bands replaced, good tracks, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda Diesel, valves ground, starter gone through, diesel pump cleaned and gone through and adjusted, set for pressure. Sand blasted and painted. Cylinders honed. Good tracks, $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac F, 1921. Restored, excellent condition, new Dixie mag, $10500; Herman Meier nnn-nnn-nnnn (Spokane Valley WA)

Cletrac HG31 crawler, (31 inch gauge, very narrow). Sat for many years, motor is free, has good tracks and very nice original tag. Has blade, write or call for pics. Rare, very hard one to find, would make nice restoration. Haul in one-ton pickup, $2600; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Cletrac HG-42. Missing hood and grill. Nice belt pulley and tracks are near new, $1500; Chad Enyeart nnn-nnn-nnnn (Laramie WY)

Co-op 30, does not run, $500 as is; Sally Gillman nnn-nnn-nnnn or nnn-nnn-nnnn (Montesano WA)

County Super Six. Big six-cylinder British Ford tractor. 4WD new fuel pump, extra parts. Needs two tires. Rare tractor and only $3000; Warren Harger nnn-nnn-nnnn (Central Point OR)

Cub Cadet 185 for parts. All tin work is good. Hi-lo is not good. Engine starts and runs but rear main seal leaks, good turf tires. Call me for prices or pictures; Bob nnn-nnn-nnnn (Omak WA)

Earthmaster B Complete and runs. Very good sheet metal. The hood needs a hole patched, but the grille is perfect. Grille still has the brass Earthmaster emblem, $900; Jack Muirhede II nnn-nnn-nnnn (Albany OR)

Eisemann magneto Type G4, rebuilt, fits Cat 2-ton, $350; Alan Langmuir nnn-nnn-nnnn (West Sacramento CA)

Ensign carbs for Cat 20, 30 all rebuilt $450. D2-D6 battery box covers with thumb screws $80. D2 engine side panels $195 per pair. D2 track adjuster covers new $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall F-12, 1936, single front, round spokes on rubber, sn 56984. Older restoration in Washington. Has been stored dry since 2002. Loose and complete. Hood and crank stored separate, $1800; Bill Ramsden nnn-nnn-nnnn or xxxx@xxxx.xxx (Minden NV) [link to photo]

Farmall 230 wide front, 1957, with attached rear blade. Sn 1287-J. Has 4 cylinder C123 gas engine and runs good. Was converted from 6 volt to 12 volt system. Tractor is in good original condition and runs good. These tractors were only built from 1956-58 with just over 7000 built, $2500 obo; Dan nnn-nnn-nnnn (Sherwood OR)

Farmall a w/blade runs, tires fair, $1000; Sally Gillman nnn-nnn-nnnn or nnn-nnn-nnnn (Montesano WA)

Farmall A. Water in oil. Good sheet metal, good tires, $750; Johnnie Everitt nnn-nnn-nnnn (Ridgefield WA)

Farmall AV, 1941. Engine overhauled, tractor restored, excellent tin & new paint. Crank start, runs good. Good tires, can email photos, $2500; John Paur nnn-nnn-nnnn or xxxx@xxxx.xxx (Cameron Park CA)

Farmall AV, 1946, restored, engine rebuilt, new tires, powder coated rims, new paint, vinyl decals, wiring, lights, 6 volt, many new parts, modified with a 2nd seat, great for parades, rides, shows, $6500; Allan Avery nnn-nnn-nnnn (Roseville CA)

Farmall Cub restored, runs great. Tires are very good. New paint and decals. Wheel weights on all 4 wheels. Hydraulic works. Parade ready. Always kept inside. Wife tractor, paid $2800, will sell for $2500 cash; Jim McCracken nnn-nnn-nnnn (Crawfordsville OR)

Farmall Cub with sickle bar mower, good sheet, $2350. Farmall Cub with hydraulics, very good sheet and tires $1850; David Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

Farmall Cub, 1948, sn 33982, all new tires, new battery, recent restoration. Looks great, runs great. All four wheel weights included. For use or show, $2000; R. Juels nnn-nnn-nnnn or cell nnn-nnn-nnnn (Penn Valley CA)

Farmall Cub, excellent running little tractor, sheet metal, new tires, hydr, wheel weights front & rear. Cycle bar mower & spring tooth, $2500; Don Eckelberry nnn-nnn-nnnn or nnn-nnn-nnnn (Noxon MT)

Farmall F-12 w/cultivator. Runs good, hand crank, $1,500; Sally Gillman nnn-nnn-nnnn or nnn-nnn-nnnn (Montesano WA)

Farmall F-20, 1936, with factory mounted two way plow and dual power lift, runs good with older restoration, $2500; Don Roberts nnn-nnn-nnnn (Crooked River Ranch OR)

Farmall F-30 Duck Bill, 1932, with cultivators, rear steel wheels with road rings.  Runs good and older restoration, $2500; Don Roberts nnn-nnn-nnnn (Crooked River Ranch OR)

Farmall H, 1949, good shape, $795; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

Farmall H, good running tractor used for haying and general farm use. Wide front, $1500; Sean Moylan nnn-nnn-nnnn (Woodland CA)

Farmall M, 1953, good shape, $895; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

Farmall M, H, C, B, A and Cub parts; tell me what you need; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall M, runs and drives well. Used for haying and general farm use, wide front, $1500; Sean Moylan nnn-nnn-nnnn (Woodland CA)

Farmall Super A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Super A, serviced and runs good, $1500. Call or text Jim at nnn-nnn-nnnn (Porterville CA)

Farmall Super A, good sheet metal, good tires, hydraulics, $900; Johnnie Everitt nnn-nnn-nnnn (Ridgefield WA)

Farmall Super H, 1954, with new sleeves & pistons, new head, runs & drives great, restored, $5200; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M, 1953, runs very good, with F-11 Farmhand, new front tires, chains on rear, $2200; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall W6, gas, wide, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Ferguson TO-20, gas, $1800; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Ford 2N, 1947. Starts and runs very well. Recent paint job and thorough going through. 12-volt conversion. Fresh tune-up parts. Starts right up. PTO needs repair, and brakes need work. Runs good as is. Great little orchard tractor, used for many years, and ready to get back to work. Very straight sheet metal. Headlights work. Come try it out. Located in the North Arlington area, about 5 miles off I-5 at exit #212. $2500 obo; Jeff nnn-nnn-nnnn after 5pm, or Cristine nnn-nnn-nnnn anytime; Cristine Titus nnn-nnn-nnnn (Arlington WA)

Ford 8N 1948. 4 hours on rebuilt engine and new clutch. 12 volt. New instruments and wiring. 4 new tires. Excellent tin, good paint; Ed King nnn-nnn-nnnn (Stockton CA)

Ford 8N parts; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N, sn 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original). Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 9N & 2N for parts or restore; Rudy Fenk nnn-nnn-nnnn (Tillamook OR)

Ford 9N, 8N Pair of wheels and tires, $100; Warren Harger nnn-nnn-nnnn (Central Point OR)

Ford Jubilee, 1953. Good useable/restorable tractor, good tires but are not matching. Has been serviced, new gauges and proof meter, new radiator, manifold and has good sheet metal. Has a PTO and live hydraulics, $2800 or will consider reasonable offer. Pictures available on request; Dennis Kytola nnn-nnn-nnnn (Ridgefield WA)

Ford tractor engines: rebuildable 9N stationary engine and rebuildable 8N engine; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford tractor front wheel weights with Ford cast in them and number 21. Good condition, $150 for pair; Irvin Baker nnn-nnn-nnnn (Ripon CA)

Ford tractor parts for sale: Engines--172 takeout and rebuilt, $650 and $2000. Complete power steering for 700 and 900 tractors, $600. Complete hydraulic pump and associated tubes attaching to transmission housing, $500. Wide front axle for 700 and 900 tractors, $700. Tires and wheels 13.6X28 and 14.9X28 on for spin-out rims, $350 per pair. Radiators take out working radiators from 900 and 8N tractors, $80 each; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)

Fordson 1924. Original full steel fenders with original steel platform floor, tool boxes and lids. On full steel wheels that are in great shape with rare tip-toe grousers on rear wheels. Original seat, no cracks, breaks, or welds anywhere on tractor that I can find. Has clutch operated brakes that work! Was running good on original manifold and carb, wood coils and flywheel magneto when parked a few years ago. Has a nice wood steering wheel. Comes with a belt pulley drive that has the hard to find built in clutch! Nice rust patina, but not rusted out at all! Stored in barn. Never been re-painted. Very few hours on complete engine rebuild. Could use a new radiator core, but original one works. $1500 obo. Would consider trading for vertical Stover or Fairbanks-Morse hit and miss engine; Ray Harry nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

Fordson Super Major, collector’s item, diesel, wide, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Hub caps, Moon cast iron front hub caps for John Deere LA, $300 for pair; David Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

International 154 Low Boy, has belly mover & front end loader, $1650; Eric Bygness nnn-nnn-nnnn (John Day OR)

International 300 utility tractor, runs good. Good tires, Shawnee loader bucket, $3,000; Sally Gillman nnn-nnn-nnnn or nnn-nnn-nnnn (Montesano WA)

International 330 utility, 1958. Older restoration. Missing hood sides, $1800; Chad Enyeart nnn-nnn-nnnn (Laramie WY)

International Harvester double disc, really old and rusty but still works. can email pictures; Bob Stere nnn-nnn-nnnn (Hillsboro OR)

International Super A with new battery 6 volt and new Kodiak 48 inch bush hog with new drive line, three point hitch. One new rear tire and other rear 95% $4500. International Super A with hydraulics and three point, excellent tires and sheet metal, $2550; David Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

International TD9 with 9ft. angle blade. Extra set of tracks and idlers. Runs great, $3750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

International TD9, runs & steers, 22” pads & blade, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

International WD9 semi diesel start on gas & switch to diesel paint 4 yrs old stored inside 4 new tires & tubes 6 weeks ago starts and runs great, $4800; John nnn-nnn-nnnn or xxxx@xxxx.xxx (Mesa AZ)

John Deere & JD parts: John Deere 40, restored, $6,250. JD 40 wheel weights (2) restored, $35 ea. JD 40 air breather assembly, $30. JD B carburetor, $90; John Evers nnn-nnn-nnnn or nnn-nnn-nnnn (Dallas OR)

John Deere 40 crawler, gas, winch, Yakima blade, $5000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

John Deere 40 in good running condition, $2500; Leo Bethje nnn-nnn-nnnn (La Center WA)

John Deere 40C, 1953. Nice straight original condition. Grill protector. PTO w/cover. Tracks near new. 3 roller undercarriage. Hydraulic lift and tool bar blade, $3600; Chad Enyeart nnn-nnn-nnnn (Laramie WY)

John Deere 420 C Holt angle blade gearmatic winch, canopy, runs well, won't steer left. Poor tracks, $2675 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420C complete engine with radiator. Good oil pressure, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 60 orchard model, very few built. Runs good, good tires, clutch needs work, $8000 obo; Sally Gillman nnn-nnn-nnnn or nnn-nnn-nnnn (Montesano WA)

John Deere 60 row crop, pulling tractor, single front wheel. Runs very good, $2,500; Sally Gillman nnn-nnn-nnnn or nnn-nnn-nnnn (Montesano WA)

John Deere 60 row crop, tricycle front wheel. Runs but needs work, after-market 3 pt hitch mpto, $1,500; Sally Gillman nnn-nnn-nnnn or nnn-nnn-nnnn (Montesano WA)

John Deere 60. Started to restore but health reasons had to quit. Make offer; Dave Douma nnn-nnn-nnnn (Lynden WA)

John Deere A used clutch pulley, $200; Buck nnn-nnn-nnnn (Greenville IL)

John Deere A, 1951, with loader, rear shaft driven hydraulic pump, power steering wide front, power-trol available, engine runs well and has good oil pressure, $2000; Brent nnn-nnn-nnnn (Billings MT)

John Deere A, 1952, very nice condition, near new 42" rear tires. Front tire holds air, good paint, straight sheet metal, 3 point hitch, runs very good, $3,500; Clyde Fillmore nnn-nnn-nnnn (Wilder ID)

John Deere AN, 1946 restored, tricycle front, excellent tires, very unique, has restored Speed Digger post hole auger mounted on tractor, belt driven $4000; Brent nnn-nnn-nnnn (Billings MT)

John Deere B (have 3). Will sell whole or part out. All have good sheet metal and great tires, have not ran in years. Price is negotiable; Mike nnn-nnn-nnnn (Kingston WA)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939, styled. Good shape, $1100; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere B, 1945. Electric start, new rear tires, fenders, good front wheel tire, 3 pt hitch. New seals in rear axles, new paint & decals, $2500 obo; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere B, 1949, good shape, $995. John Deere B, 1949 parts tractor, good tires, mag & carb, $500; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

John Deere B. 1949. Engine overhauled, tractor restored, excellent tin & new paint. Runs good. Good tires, can email photos, $4,000; John Paur nnn-nnn-nnnn or xxxx@xxxx.xxx (Cameron Park CA)

John Deere B. Single front wheel needs tires. Sheet metal is straight, $1500; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere B. Straight sheet metal, wide front end, electric start, remote hyd, paint needs buffing. Needs rear tire, $1750 or possible interesting trade; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere BR, 1936, on steel. Complete restoration, easy start, like new, $5000 obo; John nnn-nnn-nnnn (Battle Ground WA)

John Deere D 1948 parts tractor. Pretty complete, $300; Larry Arkfeld nnn-nnn-nnnn or xxxx@xxxx.xxx (Yreka CA)

John Deere D, 1944, restored, good rubber tires, spoke front wheel rims, $5500, open to offers; Brent nnn-nnn-nnnn (Billings MT)

John Deere D, 1928. A running tractor on steel wheels, no pto, restored in 1999; $4,000. Delivery possible within 100 miles of tractor's location for a reasonable fee; John Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)

John Deere D, 1931, on steel, sn 115109. Older restoration(1996). Starts and runs excellent. Has run annually for the past 18 years in parades and shows. Was wife’s parade tractor. Very strong engine, good trans, good compression. Ready to go! $3600. Bill Ramsden nnn-nnn-nnnn or xxxx@xxxx.xxx Minden NV [link to photo]

John Deere D, 1936, on cutdowns, complete, not stuck. Comes with BRAND NEW FENDERS & HOOD, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1946, runs, tires good, needs paint, 12 volt, $3000; Gary P. Collins nnn-nnn-nnnn or xxxx@xxxx.xxx (Petaluma CA)

John Deere G, 1949, needs TLC, $1595; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

John Deere GP NOS clutch pulley, $300; Buck nnn-nnn-nnnn (Greenville IL)

John Deere H, 1940, hand start, starts easy, runs good, looks good. New rear tires, front tires 99%. Brakes and rear wheel bearings replaced, $2500; John Johnston nnn-nnn-nnnn (Medford OR)

John Deere H, 1941, flywheel start, looks good, starts & runs good. New brakes, axle bearings & seals. New tires front & back, no calcium in tires, $3500; Vaughn Parker nnn-nnn-nnnn (Bellvue WA)

John Deere H, 1946, electric start, restored, very nice, reduced to $3975; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere H. 1945 Engine overhauled, older restoration, good tin and paint. Hand start, runs good. Good tires, can email photos, $3000; John Paur nnn-nnn-nnnn or xxxx@xxxx.xxx (Cameron Park CA)

John Deere L in good running condition, $2500; Leo Bethje nnn-nnn-nnnn (La Center WA)

John Deere L junk engine with starter & tractor clutch, $125; Buck nnn-nnn-nnnn (Greenville IL)

John Deere L, 1941, runs & drives, $1500 obo; John Dornbusch nnn-nnn-nnnn (Brookings OR)

John Deere LA, 1941 (?). No tag. Very good shape, $2500; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere LA, been sitting in a barn for many years, has good sheet metal & good tires, although one is on backward. Comes with sickle bar mower which is on it, has spare wheel and tire. Original tag is on it but not readable. Tractor is in very good original shape. I had it running briefly and it sounded good, did not smoke, had good oil pressure but needs gas tank cleaned, usual tinkering from sitting so long. Would make real nice restoration. Call or write for pics. $2700; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere late model B parts: Hood uncut, $100. Two radiators, $75 ea. Two sets off long rear axles, $200 per set. Plus many more parts; Steve Zane nnn-nnn-nnnn (Paynes Cr. CA)

John Deere Lindeman crawler, runs & steers, complete, poor point, $6000; Bob nnn-nnn-nnnn (Sandy OR)

John Deere L-LA-M front wheels, MC final parts, 40-420 grille parts, much more. Call for needs. Will be at the Brooks, OR Swap Meet June 20-21; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere LU 1941 power unit mounted on trailer, restored, excellent condition $2000; Brent nnn-nnn-nnnn (Billings MT)

John Deere M crankshaft 20 under reground model M, 40, others $175. John Deere M draw bar $160. Right & left side complete final drives, $225 each. John Deere M or 40 rear waffle rims with inflated and usable 24 inch tires, $595 each complete rim, tire and tube mounted. Front rims, $75 each. Console with tag, $165. Torque tube, $75; implement hitch, $145; hydraulic control, $145. Hydraulic lines and 6 pallets of model M parts; David Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

John Deere M, 1947, has new tires but needs a little work, $1500; Orval Bontrager nnn-nnn-nnnn (Lebanon OR)

John Deere M, 1948, sn 4786. Good sheet metal and paint. Starts and runs good, new tires, rear belt pulley, plow and spring tooth harrow, $4000 obo; Mike nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingston WA)

John Deere M, runs good, 99% restored, $1,500; Gary P. Collins nnn-nnn-nnnn or xxxx@xxxx.xxx (Petaluma CA)

John Deere MC crawler, 1949, needs work, $1595; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

John Deere MC, 1950. Nice belt pulley and PTO. Grill protector. Has hydraulic lift but has no blade. Nice early undercarriage, $3600; Chad Enyeart nnn-nnn-nnnn (Laramie WY)

John Deere NOS water valve, $125; Buck nnn-nnn-nnnn (Greenville IL)

John Deere parts for sale, call for list; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere tractors: 1943 John Deere B on steel, $2750. 1947 John Deere G, early model, looks like GM but tag says G, $2500. 1945 John Deere A, $1800. Two John Deere mid 30's D's, $2000 for the pair. 1949 John Deere R, $2500. 1953 John Deere 40T, $2500. 1952 John Deere AW, $1750. 1941 John Deere HN, $2500. 1949 John Deere A, $1100. 1946 John Deere BW, $1200. 1948 John Deere AW, $2000; Chris nnn-nnn-nnnn (Camano Island WA)

Kubota L295 parts POR. Used loader off L295, $1500; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Light bar for John Deere H, totally restored, $40; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Magneto for Cat D2 and D4 starting motor, $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 135 gas, power steering, good rubber, good sheet metal, live PTO, 3 pt., low-high transmission for tilling, $3975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Ferguson 35, diesel, runs, needs steering gear, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Ferguson 65, bad engine, tri-cycle, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Ferguson 65, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Massey Harris 22, gas, flathead, wide front, hyd., $1500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Harris 44, wide, gas, has grill, $1500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Harris MD 81, runs good, needs front tires. Has side panels plus 101 parts tractor, $1800 for both; Gary P. Collins nnn-nnn-nnnn (Petaluma CA)

McCormick Deering 10-20. 1928 tractor is disassembled. Engine is rebuilt. Comes with a set of full steel & cut off wheels, $700 obo; Steve Zane nnn-nnn-nnnn (Paynes Cr. CA)

McCormick Deering tractors, four 22 - 36, one 10-20. Some on steel, some on cutoffs, $2250; Hubert Bierly nnn-nnn-nnnn (Bend OR)

McCormick International 460 gas, has good Great Bend loader, new tires front, rear good, $2250; Ed Bring nnn-nnn-nnnn (Molalla OR)

Minneapolis Moline Avery V, near perfect condition has homemade hydraulic blade. Very nice restored tractor, $1975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Minneapolis Moline M5 diesel, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Minneapolis Moline UTS special. Big full fender tractor with good sheet metal. PTO and remote hydraulics, $1750; Warren Harger nnn-nnn-nnnn (Central Point OR)

Oliver 1800 series C, fully serviced, no dents, runs good, comes with extra rear tires, $2500. Call or text Jim at nnn-nnn-nnnn (Porterville CA)

Oliver 60 narrow front, engine turns over, not running, has PTO, $400; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Oliver 88 row crop with single front wheel. Runs good, $2,500; Sally Gillman nnn-nnn-nnnn or nnn-nnn-nnnn (Montesano WA)

Oliver OC3 crawler with Ware loader and rare Trasco auxiliary transmission plus the 3 speed most have. Crawler sat for many years and motor is stuck, has rear ripper. Undercarriage is very good. Nice machine to restore or fix up and use, $2500 obo; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Oliver parts: Oliver OC4 gas motor & transmission, $500 each; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Oliver starters: have 2 used 1365 Oliver Starters, (do not know if they work), $100 for both; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Parting out Ford 841 tractor, possible good engine, and Massey Ferguson 40, good tires, possible high crop style, possible good engine; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Schramm pneumatic tractor with manuals. Runs and drives, makes lots of compressed air, collector’s item, $2200 obo; Michael nnn-nnn-nnnn or xxxx@xxxx.xxx (Oregon House CA)

Tires/tubes/rims: one 10-20 tire tube & rim, good shape, $95. one 12.4/11-28 tube tire & rim, good, $125. One 10-28 tube tire rim excellent shape, $150. One 11.2x28 tire only, very good, $100. Two 11.2x28 tube tire & rim 9N, good, $125; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

Tires: two 20.8-38 8-ply Firestone 25% good casing, $75 for both; Ken McDonald nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

Trade: Caterpillar D4+D2 collection for mini excavator. I have a D4 Cat with blade & roll cage, sn 7U23855 mid 50's. Both engines run good, fresh oil change, electric start on pony motor. #44 Hydraulic Pump and straight blade. Just replaced seals in pump and one ram. Decent undercarriage. D2 farm Cat sn 5U13455, mid-fifties, engines run good but starter pinion currently stuck as well as steering clutches. Includes #41 hydraulic pump, decent undercarriage. Parts Cat D25U6888 mostly there except for pony motor and control levers, fuel tank, etc. Hate to get rid of my Cats but need a mini excavator! Randy Merrick nnn-nnn-nnnn or xxxx@xxxx.xxx (Ashland OR)

US Trac crawler, very similar to the Clark Airborne crawler, uses the same undercarriage. Hard to find crawler starts and runs good, steers very good both ways, bushings have some egg shape but none are through, lots left on this machine. Very nice shape, has original tag. Email or call for pics; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Wallis 20-30 Orchard model, 1929. Made by Massey Harris. Older restoration in Idaho and was run by previous owner. I have stored it dry since I bought it in about 1999 but have never run it. Complete and loose. Not a common tractor. sn 62114, $5000; Bill Ramsden nnn-nnn-nnnn or xxxx@xxxx.xxx (Minden NV) [link to photo]

Zetor 8145, bad engine, 4x4, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)