Buda headless engine model W, WU, R or RU wanted. This is a 4 cylinder engine about 3-3/4" bore.; Roland nnn-nnn-nnnn (Grants Pass OR)
Bulldog 1-1/2 hp needs single or a pair of flywheels and a nameplate; Joe Olsen nnn-nnn-nnnn or
xxxx@xxxx.xxx (Ukiah CA)
Fairbanks Morse 1902 8 hp standard horizontal (type "N") parts wanted. I have an early 8 hp hoisting engine that’s missing most all the engine parts. Any parts leads appreciated; Kim Kestler nnn-nnn-nnnn (Reno NV)
Fairbanks Morse 1902 8 hp standard horizontal N parts wanted. I have an early 8 hp hoisting engine that’s missing most all the engine parts. Any parts leads appreciated; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Fairbanks Morse 6 hp T (small vertical) complete engine or parts wanted; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Fairbanks-Morse Z 6hp hopper cooled parts wanted, such as exhaust rocker arm lever, exhaust push rod, throttle rod, crank cover, intake & exhaust valves in good condition, just to name a few. Call us if you have what we need! Pat Bold nnn-nnn-nnnn or John Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)
Flat belt pulley wanted for my 6hp R&V engine. Pulley bolts to three flywheel spokes. Holes spaced 6-5/8" between centers and use a 1/2" bolt; George Best nnn-nnn-nnnn (Beaverton OR)
Galloway 5 hp needs round rod; Norm Bunker nnn-nnn-nnnn (Bellingham WA)
Need an Essex or Lunkenhiemer straight through mixer, 3/4" or 1" NPT. These were used on the early Sparta built Economy engines, and Leader Field Force engines. Reproduction, original or any leads appreciated; Kevin Fielding nnn-nnn-nnnn or xxxx@xxxx.xxx (Clearfield UT)
New Way 6 hp horizontal engine wanted, complete & running; Bruce nnn-nnn-nnnn (San Francisco CA)
Samson Gas engine late style parts wanted. I have a late style Samson gasoline hoisting engine that I need ignition parts and the intake manifold, and mixer for. I would also like to find a late style brass nameplate for it as well. Any leads appreciated; Kim Kestler nnn-nnn-nnnn (Reno NV)
Samson late style gasoline hoisting engine needs ignition parts and the intake manifold, and mixer. I would also like to find a late style brass nameplate for it. Any leads appreciated; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Sparta Economy 2 hp needs flywheel, 22" diameter 6 spoke with 1-1/2" shaft, 5/8" keyway, single split, one bolt; Norm Bunker nnn-nnn-nnnn (Bellingham WA)
Stover 1-1/2 hp igniter and speed control wanted; Harry Brogioli nnn-nnn-nnnn (Canby OR)
Stover W parts or complete engine wanted, a stuck but complete engine would be perfect, or even an engine with broken flywheels would be okay; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)