October 2014 - Tractors & Parts For Sale

All Classified Ads

Aaron Beaver is having a sale. Its been 2 years since his accident and he said he cant do it anymore. Tractors: Cat 10s, Oliver Super 66, Oliver OC3, and more. Vehicles: 1967 Dodge pickup, 1988 Jeep Cherokee and more. Tractor parts, car parts, old farm equipment. No early sales. October 25 and 26. 8:00 to 3:00. 14420 Hwy 160, Walnut Grove, CA

Allis Chalmers D 12 with sickle mower, runs great, $3950 obo; Jerry nnn-nnn-nnnn (Gaston OR)

Allis Chalmers B for parts, no wheels, everything else is there; Steve Hess nnn-nnn-nnnn (Dayton OR)

Allis Chalmers G, 1948, partially rebuilt, new paint, new tires, some new parts & extras, 3 manuals, $3500; James Martin nnn-nnn-nnnn (SeaTac WA)

Allis Chalmers G, engine shot, no hood, mostly complete, set up as a spray rig, price reduced to $800, consider John Deere trades; Pat Boyle nnn-nnn-nnnn (Washougal WA)

Allis Chalmers Rotobaler with AC motor, $750; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Allis Chalmers WM, 1934, valves ground, tracks good, 15" pads, replaced steering clutch discs and crank start. Sand blasted and painted, $2300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers WM, 1937, valves ground, cylinders honed, rebuilt carb, several steering clutch plates replaced, electric start, sand blasted and painted, $2750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers: Parting out Monarch 35 K. Also have belt pulley attachment off 35 K, $800; Buck nnn-nnn-nnnn (Greenville IL)

Bosch (made for Caterpillar on tag) Pony Mag: 2 cylinder and Caterpillar aluminum fuel tank cap. Best offer; Lynn Abraham nnn-nnn-nnnn (Philomath OR)

Case 300 round nose, very nice unrestored tractor complete with Eagle hitch, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case 310 (crawler) bull gear and axle, been sitting around for years and is slightly rusty but is new, never used, $175. Pics available upon request.; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case C, 1929, complete and stuck, on cut downs to rubber has rare flat belt water pump, $600 obo. Also parting out Case C, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F&H hc245 rear round spoke wheels 9x24, very nice and rare, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case D parts: complete radiator with like-new core off DI, reg D's change top tank, $100; manifold, $100; cast iron valve cover, $50; air cleaner set, $30; Lon Sisson nnn-nnn-nnnn (Rohnert Park CA)

Case DI tractor, needs help, $250; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Case G320W, drove out of shop, made it through a barn fire, tin is straight, needs all rubber items, loader/backhoe, very rare, $2500; Klein Tractor nnn-nnn-nnnn (Rainier OR)

Case S series grille in very nice original shape, needs painted, send for pics, $100; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case SC, 1942, two tone Case colors, like new rubber, clean fuel tank with non ethanol gas. Starts and runs well. Fresh engine oil, $2000; Dave Pembroke nnn-nnn-nnnn (Silverton OR)

Case SC, SO, SI, D, DV, DI, DO models. Parts: wheels, fenders, small parts; Steve (call evenings) nnn-nnn-nnnn (Boring OR)

Case VAC 1946 tractor runs good and has good paint; Richard Duval nnn-nnn-nnnn or xxxx@xxxx.xxx (Anderson CA)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 22 crawler, 1950, tractor number 1J1470WSP, original condition, runs good, crank start, tracks in good condition, seat in good condition, $3800 obo; Tim Totaro nnn-nnn-nnnn (Minden NV)

Caterpillar 30, 10, parting out, mostly castings for 10; Buck nnn-nnn-nnnn (Greenville IL)

Caterpillar 40 diesel wide gauge, engine stuck. Tractor complete, good undercarriage; Mel Freitas nnn-nnn-nnnn (Galt CA)

Caterpillar 6G series wide gauge Thirty. Have had engine running, have not driven tractor. Mostly complete, comes with belly pan, and an extra radiator. Undercarriage fair, sheet metal fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D-2 5J series wide gauge tractor. Runs good, has a hydraulic bulldozer blade, brand unknown. Undercarriage fair. Located in Eureka NV, $2500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 track adjuster covers new $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D-7 3T series, 1948. Runs very good. Has electric start pony which runs well. Has hydraulic assist steering, and forward/reverse lever. Undercarriage is good, grousers are a little low. No attachments, $3500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95. Photos available by e-mail; Ron nnn-nnn-nnnn or Ron xxxx@xxxx.xxx (Shingletown CA)

Caterpillar R2 6J wide gauge, Isaacson hydraulic blade, Hyster winch, undercarriage poor, motor stuck, $1500; Richard Bombard nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn WA)

Centaur KV, 1948. Runs well with a clean fuel tank. Older matched rubber, and mounted sickle mower. 4 cyl Le Roi engine, with 4-speed transmission. Was a county mower in the state of Ohio, $1200; Dave Pembroke nnn-nnn-nnnn (Silverton OR)

Cletrac AD 1936 Hercules diesel, hydraulic dozer (Issacson), valves ground, cylinders honed. Diesel pump gone through and adjusted, starter gone through, steering bands replaced, good tracks, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda diesel, valves ground, starter gone through, diesel pump cleaned and gone through and adjusted, set for pressure. Sand blasted and painted. Cylinders honed. Good tracks. $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AG6, good undercarriage, engine has been changed to B-G motor, not running; Mel Freitas nnn-nnn-nnnn (Galt CA)

Cletrac HG crawler, early model, crank start, has not run in years but was under cover, motor turns over, wore undercarriage, no blade, grille is there and hood, restoration project or parts, $850; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cletrac HG31 crawler with nice original tag. This rare machine is the narrowest crawler they made. It is about 3 feet wide outside track to outside track. Been sitting for years but motor turns over, has fenders, blade, very good machine to restore, good tracks, $2600. Pics available upon request; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cletrac HG42 (early) has not run in years, crank start, has PTO unit, quite complete even has grill, worn undercarriage, good yard art or restore, probably would run with little work, good for parts, $850 or might part out. Can ship, pics available; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Cletrac W, $5000; Buck nnn-nnn-nnnn (Greenville IL)

Clutch assembly off Allis Chalmers E-60 power unit, $150; Buck nnn-nnn-nnnn (Greenville IL)

Cockshutt 30 & E-3 rear wheel weights, have 3 sets; Al Barkl nnn-nnn-nnnn (Elko NV)

Co-op C, 1944, only yr. made, sn C-229, $3,900 obo; Tom Treadaway nnn-nnn-nnnn or nnn-nnn-nnnn (Pleasant Hill OR)

Crawler tracks for early Cleveland Tractor/Cletrac model H, 1917-1920 Also Weidely 4 cyl engine for same model; Roland Bleitz nnn-nnn-nnnn (Grants Pass OR)

Dozer blade for John Deere Lindeman with mounting brackets, cylinders and pump, $1100; Jim nnn-nnn-nnnn (Dallas OR)

Dozer tracks fit 1961 Holt built in Oregon for military. May also fit Oliver OC3 or OC4, $250; Ron Fogle nnn-nnn-nnnn (Puyallup WA)

Ensign carbs for Cat 20, 30 all rebuilt $450. D2-D6 battery box covers with thumb screws $80. D2 engine side panels $195 per pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 140, runs great, $1200 obo; Jerry nnn-nnn-nnnn (Gaston OR)

Farmall 200: wide front with fast hitch plow, blade, disc and sickle mower. Has trip bucket loader. Nice paint and tires $3500; Fred Gilbertson nnn-nnn-nnnn (Creswell OR)

Farmall 400 diesel runs Factory wide front with Behlen power steering good sheet metal, $1750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall A comes with sickle bar mower, plow, other attachments. Very nice condition, $1975; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub Lowboy & 1 bottom plow, sn 530, 2nd lowest serial number in US (Red Power Magazine), $5000; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall Cub, 1947, and 10 implements, $4600; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall Cub, 1948, good running tractor, all 4 wheel weights, front blade, 17'' plow, small disk, no rust, always garaged, straight chassis, good tires, $1,900 obo; Jerry nnn-nnn-nnnn or nnn-nnn-nnnn (Washougal WA)

Farmall Cub, good running, painted, decals; Klein Tractor nnn-nnn-nnnn (Rainier OR)

Farmall Cub, runs great, decent rubber, cultivators, 12 v conversion, preparing for field work, $1850; nnn-nnn-nnnn (Rainier OR)

Farmall Cub, sn 86527-1949. Starts and runs good. Good rubber all around (rears are nearly new). Good "touch control" hydraulic lift system. A complete tractor with no missing parts. Comes with Operator's Manual. For everyday use or clean-up for a show tractor, $1,650; Jim nnn-nnn-nnnn (Bremerton WA)

Farmall F12 for parts, $200; Robert Adams nnn-nnn-nnnn (Fresno CA)

Farmall F14, sn FS 45424. Single front wheel. Tires are shot. Tractor is complete except for hood, $400; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Farmall H belt pulley gear box, excellent condition $85. Front radiator shutters and controls for H Farmall. Repainted, excellent, $80; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall H, 1941, with 3 pt disk, rear blade, $3000; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall loader, no bucket; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall parts, some Super C, some H. Drawbar fast hitch, live hydraulic pump, etc. Large prongs not worn much; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall sheet metal from A to 450 plus a bunch of misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super A sn 268325 with International 1000 loader, 3 point hitch with blade and forks for 3 point, $6500; Jim nnn-nnn-nnnn (Dallas OR)

Farmall Super A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Super A, 1953, & plow, sickle mower, $3000; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall Super C with hydraulic push blade, $1100; Garland R. Goesch nnn-nnn-nnnn (Port Townsend WA) [link to photo]

Farmall Super C, 1953, wide front, original books, $3500; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall Super H, 1954, nicely restored, new battery, 13.6x38 rears, live hydraulics, rear remote valve; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super M, 1953, comes with loader, rear chains, snow bucket, new front tires; Al Barkl nnn-nnn-nnnn (Elko NV)

Ferguson 1951, TO20, runs good, sn 43432, with 5 ft. mower, $3000; Tom Treadaway nnn-nnn-nnnn or nnn-nnn-nnnn (Pleasant Hill OR)

Ford 600 tractor $2500 obo. Also have misc 3 pt implements; Jerry nnn-nnn-nnnn (Gaston OR)

Ford 620 tractor, 3 cylinder diesel. New long bar - short bar. Good tires, runs well; Perry Rosenquist nnn-nnn-nnnn (Noonan ND)

Ford 800 runs excellent, recent overhaul, $3500 obo. Also have misc 3 pt implements; Jerry nnn-nnn-nnnn (Gaston OR)

Ford 801 series 57-62, runs strong. Very good tires front & back, loader (strong). Will sell loader separately. Must sell quickly; Stu Wade nnn-nnn-nnnn (Chico CA)

Ford 860 tractor, 1955. Great condition. Completely rebuilt and painted. Strong pulling tractor. Many of you have seen it pull at tractor shows. Ready for parades, tractor shows or work. Comes with 6' angle blade, and umbrella, $3950. Call/text Duane Christensen nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR) [link to photo]

Ford 8N 1948. 4 hours on rebuilt engine and new clutch. 12 volt. New instruments and wiring. 4 new tires. Excellent tin, good paint, $3600. Pics available; Ed King nnn-nnn-nnnn (Stockton CA)

Ford 8N tractor, disassembled. Mostly complete, there is also an extra lower engine case half and head. Body panels are in good shape for the age. Tires have liquid in them. Pictures on Craigslist. Search the Portland, OR list for "Ford 8N for parts" in the title; Keith Fish nnn-nnn-nnnn (Hillsboro OR)

Ford 8N tractor, rebuilt. Also, 8N tractor parts: rear axle bearing assembly, reconditioned radiators, hydraulic lift draft control levers, rear brake shoes and linings, many other parts; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1949 high crop, great show tractor, $2550; Paul nnn-nnn-nnnn or nnn-nnn-nnnn (Yucca Valley CA)

Ford 9N, 8N pair of wheels and tires, $100; Warren Harger nnn-nnn-nnnn (Central Point OR)

Ford NAA Golden Jubilee, 1953, starts and works OK, unrestored, 6V alternator, High Crop type with new tall rear tires and rims. Repaired front axle from damage. Water pump noisy and clutch jumps a little, $1850. Photos by email. Dave Erickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)

Ford tractor for parts, not running, $500; Jack nnn-nnn-nnnn or xxxx@xxxx.xxx (Central Point OR)

Ford tractor generator, 6 volts, fits on O.H.V. engine, part # 10139A, $75; Ron Fogle nnn-nnn-nnnn (Puyallup WA)

Ford water pump for 600-900, $40. P/S unit for same, new, $75; Lon Sisson nnn-nnn-nnnn (Rohnert Park CA)

Hood for John Deere 40, 420 crawler tractor, very good shape, $150, water pump off a John Deere 440 crawler, $50. Rollers and sprockets off John Deere two cylinder crawlers lots of misc parts, starters generators. Also have hoods, starters, generators and mags (some rebuilt) off Oliver OC3 crawlers. Sell one or all, cleaning out, call or write for pics and quotes; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Hydraulic engine side-mount pump for Ford 600 series tractor, $75; William Henderson nnn-nnn-nnnn (Sheridan OR)

International Cub, 1966, several new parts, new tires & wheel weights; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

International T-20 needs work, $500; Mel Freitas nnn-nnn-nnnn (Galt CA)

International T6 crawler recently restored, good undercarriage, sprockets fair, $1295 obo; will sell complete crawler with blade for $1995 obo; Roger nnn-nnn-nnnn (Redding CA) [link to photo]

International T6 dozer blade complete with pump, tank, new hoses & valve, what you see here minus the crawler, $825 obo; Roger nnn-nnn-nnnn (Redding CA) [link to photo]

International TD9 Series II dozer, direct elect start, torque converter trans, 25T winch, cage, sweeps, very tall/good grousers, pins and bushings are round, runs, manual tilt blade, but no power to the left final. I will load onto your lowboy, $3875; Fred nnn-nnn-nnnn (Enumclaw WA)

John Deere 1927 parts tractor with good 12 spoke rear wheels, includes some other parts $1500; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere 2-cylinder parts: sprockets, starters, hood, some rollers, etc; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 320U, sn 322131, good wheels/rubber, runs good, factory foot throttle, orchard exhaust, original condition. Collectable, $6000. John Deere 320U, sn 320298, original condition, 3 pt., front weight, good rubber/wheels, starts, runs excellent. Low production tractor/ good investment, $6000; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere 4010. Loader, plowed, hayed, now ready to sell, $8500; Klein Tractor nnn-nnn-nnnn (Rainier OR)

John Deere 40-C tracks, one 4-roller 14" pads, one 3-roller 12" pads, 14" snow pads-pads only; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere 420C complete engine with radiator. Good oil pressure, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420W 1956 rare navy tractor. Only 124 made for the Navy Dept. by John Deere and is Industrial Yellow in color. Complete restoration, excellent starting & running in top condition. I have owned it for the last 36 yrs. & has always been garage kept. I also have the original parts & owners manual (not reproductions). If interested in how rare these tractors are check out the Sept./Oct. 2003 addition of the Two-Cylinder Club magazine. (You can do that on line). Have lots of pictures from start to finish & was professionally restored. Please only interested buyers, $25,000; Don Harmon nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond OR)

John Deere 50 Rollomatic. 3 pt. very good sheet metal. Very complete, easy restoration, engine turns over, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 60 parted out, lots left: crank, head, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 70 crankshaft good spline. Measures good. Pt F1223R, $300; Gene nnn-nnn-nnnn (Davenport WA)

John Deere 720 diesel, pony start; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere A 1936 parts tractor for sale. Mostly complete minus cylinder head, valve train, air cleaner bottom, and Rh brake assembly. Has part of Bee Gee hydraulic unit, $500 for the tractor; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere A and matching JD wagon, restored, perfect parade combination. Starts and runs excellent. $7000 for the combination, I will separate $5000 for the tractor and $2500 for the wagon. I can send pictures. Emails and texts need to mention "John Deere" in subject or headline, so that I know you are for real. I am not interested in low ball offers; Derrick Royer nnn-nnn-nnnn or xxxx@xxxx.xxx (Ashton ID)

John Deere A, 1946, running condition, good paint, clean, $2000; Joe Pereira nnn-nnn-nnnn or Leta nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA) [link to photo]

John Deere A, 1947, sn 579165. Bucket, tiller, and cutter available, still runs. Comes with original operator's manual, $2,500. Please email for information and pictures. Email preferred; call between 4pm - 9 pm, please; Alice nnn-nnn-nnnn or xxxx@xxxx.xxx (Montague CA)

John Deere A, 1951, sn 682311, runs good, fresh paint. New front tire, seat upholstery, 12v alt, & battery. Rebuilt starter and carb, $5,000 obo; John nnn-nnn-nnnn (Lodi CA) [link to photo]

John Deere A, used clutch pulley, $225; Buck nnn-nnn-nnnn (Greenville IL)

John Deere AO, barn fresh,1947 unstyled, loose, tires hold air, hard to find, $3500; Fred nnn-nnn-nnnn (Enumclaw WA)

John Deere AW 1948, $2500. 1952, $1750; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B 1949 parts, $500; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B tractors: 1943, on steel wheels, $2750; B, 1947s, have two. Both have 42" rear wheels and 16" single front wheels, one runs, the other needs the motor assembled, $2200 for the pair; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B, 1937, unstyled, sn 38478. Runs good; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1941, sn B101279, has pto. Parts or restore, $600; Tom Treadaway nnn-nnn-nnnn or nnn-nnn-nnnn (Pleasant Hill OR)

John Deere B, 1950, for parts. Missing rear wheel & carb, otherwise complete; Steve Hess nnn-nnn-nnnn (Dayton OR)

John Deere B, stuck motor, good tires, mag & carb, $495; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

John Deere B. Single front wheel needs tires. Sheet metal is straight, $1500; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere BM, have two. sn 158478 and sn 119049. Hydraulic lifts, hand start, ant eater wide front, $1200 for both; Aaron Gully nnn-nnn-nnnn or nnn-nnn-nnnn (Anderson CA) [see 2 photos]

John Deere BR, 1936, complete restoration. Hand start, steel wheels, excellent starting & running in top condition, $4500; John Shierman nnn-nnn-nnnn (Battle Ground WA)

John Deere D, 1935, on cutdowns, complete, not stuck. Comes with brand new fenders & hood, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1937, have two. Make one out of two, $2000 for the pair; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere D, 1947 styled, parting out whole tractor electric start; Phil DoMoe nnn-nnn-nnnn (Red Bluff CA)

John Deere D, 1947, not running, needs back tires, tractor motor not stuck, tin okay; Mel Freitas nnn-nnn-nnnn (Galt CA)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere front wheel weights, fit 16 wheels. Also have a new brake band to fit a JD 440 crawler or 420 crawler, or maybe a JD 40, $125; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere G, 1946, sn 20238. Runs great; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere G, 1953 heads (2) and blocks (2); Perry Rosenquist nnn-nnn-nnnn (Noonan ND)

John Deere GP NOS clutch pulley belt pulley, $300; Buck nnn-nnn-nnnn (Greenville IL)

John Deere H, 1940, older restoration, good rubber, starts & runs good, $2150; John Shierman nnn-nnn-nnnn (Battle Ground WA)

John Deere H, 1940. Easy hand start with clean fuel tank and non-ethanol fuel. Matched rubber with good paint. $2500; Dave Pembroke nnn-nnn-nnnn (Silverton OR)

John Deere HN, runs, new rear tires, $2500; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere L, 1939, crank start, needs paint, is apart, $1500; Art Stockman nnn-nnn-nnnn (Moses Lake WA)

John Deere LA 1946 with tag. Motor turns over but not started for several years, no attachments. $1200; Richard Bombard nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn WA)

John Deere Lindeman crawler, excellent condition, runs. Hand start, good tracks, no blade, sn 336407, $7,000 or make offer. Call after 3PM; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere parts: Flathead part # F486 R USG, $300. Vertical manifold for JD 40-M, $40. JD air pump w/hose part # 6688, $100. Weights 8-75# slab, $50 apiece. 8- 100# suitcase, $75 apiece; Glen nnn-nnn-nnnn (Moses Lake WA) [link to photo]

John Deere styled A, 1945, older restoration, nice shape, runs, $2000; Tom Treadaway nnn-nnn-nnnn (Pleasant Hill OR)

John Deere tractor with 3 pt hitch, tires fair to good, narrow front, $4000; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere wide front, excellent sheet metal, recent engine work. Very handsome John Deere ready for proper restoration, $3975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere, parting out a styled D 1947, electric start. Also have a pair of 11x38 9 hole wheels and tires; Phil DoMoe nnn-nnn-nnnn (Red Bluff CA)

John Deere: Parting out 1951 late-styled John Deere B dual wheel tricycle, 1940 John Deere H, and 1946 John Deere LA. We will be at Woodland and Tulare swap meets and could deliver parts there; Patrick nnn-nnn-nnnn xxxx@xxxx.xxx or John nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)

John Deere: parting out late styled John Deere A tractor (no sheet metal) perfect stamped steel frame, $75. Also early styled B, which has sheet metal. Both have crankshaft and flywheels; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Kubota L295 parts POR, used loader off L295, $1,500, also Kubota B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Magneto for Cat D2 and D4 staring motor $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 35 diesel. 3 pt. Overriding clutch, very good sheet metal, new front wheels and tires. Good rear tires on spin-out wheels. Runs good, $2975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Ferguson 35, gas, used all season, $2200; Klein Tractor nnn-nnn-nnnn (Rainier OR)

Massey Ferguson 65, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris General Purpose 4WD 1931 tractor. Has been completely gone through. All new bearings, hood, gas tank, radiator, tool box. Engine rebuilt with new pistons, rods, rings, spark plugs, wires, crank turned, bored 40 thousands over. Water pump and governor rebuilt. Carb and mag professionally rebuilt. Just needs paint to finish restoration. Excellent condition. Pics on request; Tom nnn-nnn-nnnn or xxxx@xxxx.xxx (Perth-Andover NB)

Massey-Harris 30. 1948 Clean fuel tank / with non-ethanol fuel. 4 cyl 5 speed, starts and runs well. Tires are mismatched on rear but very useable. Fronts are like new. Paint is good and has drawbar, but no 3pt, $1200; Dave Pembroke nnn-nnn-nnnn (Silverton OR)

McCormick Deering Farmall F-12 in good condition. Runs good, all original parts, $1900 obo; Wes Green nnn-nnn-nnnn (McKinleyville CA) [link to photo]

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1000. McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $650. McCormick Deering O-4, parting out: batwings/engine side panels, orchard belt pulley, hood, shutters, all-fuel manifold, exhaust elbow plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering OS-6, sn O BK S 15885. Tires are shot. Complete except for the belt pulley. Pulley gears, control and housing is there, $400; Wilbur Reil nnn-nnn-nnnn (Davis CA)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering tractors, have 3, not running; Mel Freitas nnn-nnn-nnnn (Galt CA)

Minneapolis 17-30 B cross motor tractor, 1926/1927, sn 5712. Last ran 1 year ago. New head gasket and valves were lapsed at that time. No seat. In good shape. Pictures upon request, $14000; Bill Standish nnn-nnn-nnnn or xxxx@xxxx.xxx (Rathdrum ID)

Minneapolis Moline G, 1952, propane 4 cylinder, new rubber all around. Excellent condition; Perry Rosenquist nnn-nnn-nnnn (Noonan ND)

Minneapolis Moline GVI 6 cylinder propane tractor, 1962, excellent condition, new rubber all around; Perry Rosenquist nnn-nnn-nnnn (Noonan ND)

Minneapolis Moline M5 diesel, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Minneapolis Moline R 1942. Starts and runs well. Older but good matched tires, (38 ) new seat, hand clutch, belt pulley, working lights and very nice paint, $1400; Dave Pembroke nnn-nnn-nnnn (Silverton OR)

Minneapolis Moline UTS special. Big full fender tractor with good sheet metal. PTO and remote hydraulics, $1750; Warren Harger nnn-nnn-nnnn (Central Point OR)

Minneapolis Moline: 1952 LP model U, has pto, runs, $3,000. Minneapolis Moline ZTS, 1940's?, can't read #, pto, Wheatland fenders, flat spoke wheels front & rear, $2,000. Both are wide front; Tom Treadaway nnn-nnn-nnnn or nnn-nnn-nnnn (Pleasant Hill OR)

Oliver 1900 in good condition: $5000 or trade for cows or ?? This tractor still runs great! We have farmed with it for the last few years. GM 88 hp Diesel Detroit engine. Checkerboard tractor that sill has good tires! Has a 3 point and dual speed PTO the body is in good shape. Wide not row crop front end. No power steering. This is a great pulling tractor! For pictures and information call, text or email me; Matt Deebach nnn-nnn-nnnn or xxxx@xxxx.xxx (Tonasket WA)

Oliver 60 narrow front, engine turns over, not running, has PTO, $400; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Oliver 70, 1945, runs well, tin in near perfect shape, new tires and extra block included, reduced to $3000; Hank Darmer nnn-nnn-nnnn (Federal Way WA) [link to photo]

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold $7200 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver Hart-Parr 80 Standard, 1937, has all brass front grill, nice condition, $2000; Tom Treadaway nnn-nnn-nnnn (Pleasant Hill OR)

Oliver OC3 crawler loader with Ware loader, been sitting for years and motor is froze, has the rare Trasco auxiliary transmission. Tracks and undercarriage are very good. Has hydraulics in rear. Project machine but well worth fixing up, $1900. If you find a shipper I can load; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Power Horse tractor, completely rebuilt, has new tires, $16,000. For more info call Buster nnn-nnn-nnnn (Yuma AZ) [link to photo]

Radio: Tractor radio: fender mounted, AM, beautiful tone 12V, antenna, and painted Ford Blue. $50 firm; Fred Gilbertson nnn-nnn-nnnn (Creswell OR)

Rims: rear rims for a Farmall 200 C or SC?. 36" X 9" no chloride no rust. Invested $135 apiece, make offer; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Small Agricat Crawler basket case, all apart, decent tracks, engine turns over, lots of good parts, original tag, pics available upon request. $850 or offer, will consider parting out. Can ship; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Tires/tubes/rims: one 10-20 tire tube & rim, good shape, $95. one 12.4/11-28 tube tire & rim, good, $125. One 10-28 tube tire rim excellent shape, $150. One 11.2x28 tire only, very good, $100. Two 11.2x28 tube tire & rim 9N, good, $125; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

Tires: 11.x38; 4x15; 14.9x38; 12.4x38; 6.7x15; 6.5x16. $100 each obo; nnn-nnn-nnnn (Rainier OR)

Tires: 13.9-36's, 75% matched tread on Double Bevel rims JD cast centers for rack and pinion axle, $650 all or separate; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Tires: 500x12 tires off old walk behind rototiller or tractor with the tractor lug cross design, might be original and very old but look very very good, comes with 5 lug wheels all painted up, $125 for the pair, pics upon request; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Tires: pair of 14.9x24 6-ply, 85% tread, like new, $450 for pair; Lon Sisson nnn-nnn-nnnn (Rohnert Park CA)

Tractor tire: Armstrong Hi Power-lug heavy duty R-1 11.2x24, 99% tread, great condition, $75; Nick Neuburger evenings nnn-nnn-nnnn (Galt CA)

Tractors: about 70 older tractors, all models & makes. Some on steel, some on rubber. Some run, some for parts. Call with needs; Perry Rosenquist nnn-nnn-nnnn (Noonan ND)

Volvo tractor for parts only, Type BM/Volvo 425, sn 6592 throw-out bearing back, plus wide front end, hood has dent, some engine parts, no radiator. The back end has wheels with one tire that holds air, 3 point and top link, too many projects, $100 obo; Steve Fromhold nnn-nnn-nnnn or cell nnn-nnn-nnnn (Graham WA)

Wagner W9, new tires, good sheet metal, 4 cyl Cummings, $10,000; Gene nnn-nnn-nnnn (Davenport WA)

Wheel weights: One pair of rear wheel weights for A or B Farmall $100; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Wheel weights: rear, extra heavy off of Minnie MF. Front wheel bracket & weights off Minnie 4-Star; Buck nnn-nnn-nnnn (Greenville IL)

Wheels: 1 pr F-12 IHC front steel wheels. Good condition, $300; Irvin Baker nnn-nnn-nnnn (Ripon CA)

Wheels: full set of F & H wheels to fit 6-spline John Deere D, $700; Gene nnn-nnn-nnnn (Davenport WA)

Wheels: Two large rear tractor wheels, 28 x 17 wide. 8 hole lug pattern. May be from self-propelled combine. Excellent condition $200; Wendell Newman nnn-nnn-nnnn (Carson City NV)