October 2014 - Vehicles

All Classified Ads

1928-1929 Ford model A conversion to a crawler tractor. Everything is stuck but complete. Considered a "high drive" crawler used in potato farming. Very rare! A must have for Ford collectors!! $1750 obo; Don Chappell 503 679-2726 (St Helens OR0)

1928-31 Ford A frame, hydraulic early V8 axles, 17 inch spoke wheels, leaf springs. $500 for the lot; Frank 408 202-2810 (Morgan Hill CA)

1929 Ford Model A pickup. Has been restored from the ground up. Has 5 new tires, Model B motor, 1931 radiator, Chevrolet hood. Been stored and driven less than 2 miles since restoration, $7500; Eldon Kerns nnn-nnn-nnnn (Goldendale WA)

1937 Chevrolet truck, Series SB, 131.5” WB, 216 engine loose, 7.50x20 tires. Complete truck, $1250; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)

1942 WW2 Chevrolet Military Trucks. I have three 1-1/2 ton front wheel drive trucks. One has a military Hercules dump bed. Others have military cargo beds. Two trucks run with Idaho titles. The other one is 90% complete. (No title, sold as parts). The beds are steel and in fair condition. Also have many extra parts, (some new) including fenders, cab, radiator, engine, and more. Would like to sell it as a lot but would consider selling trucks individually. If interested come look at them. $8,000 or make a reasonable offer; Chuck Tillman nnn-nnn-nnnn (Nampa ID)

1942-48 Ford transmission parts, '47 axles, Columbia OD parts, make offer; Ron Fogle nnn-nnn-nnnn (Puyallup WA)

1944 WW2 Military MB Willys Jeep. Runs, needs restored, has Idaho title, $2,850; Chuck Tillman nnn-nnn-nnnn (Nampa ID)

1948 Red Chevy 1 ton. Dually. 12 volt. Hydraulic lift, 270 GMC 4 speed, 8x8 all steel bed. Dana 370 rear end, tubeless tires, new king pins, bushings, front brakes. Runs good. Needs minor body work and assembly. Pics available. $4500 obo; Ed King nnn-nnn-nnnn (Stockton CA)

1950-51 Studebaker bullet nose fenders and hood. The fenders are complete with inner panels, $300 or will separate; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)

1951 Ford Cab Over with all chrome and extras, $1000. Rebuilt 460 Ford and rebuilt C6 for an additional $1000; Robert Adams nnn-nnn-nnnn (Fresno CA)

1953 International L-120 engine & transmission, $100 each; Buck nnn-nnn-nnnn (Greenville IL)

1962 Corvair rampside, running, 4 speed, many dents and dings, no serious rust, many new parts, auto engine; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1963 Corvair van, have 2. One mostly complete, not running, basically rust free. One 1963 Corvair van, complete, not running (was running), quite nice, many new parts; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1963 GMC 4000 305 V6, 4+2 gears, good running truck, no serious rust; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1963 Studebaker “Zip-Van”, completely re-furbished with re-built 270 cu. in. engine. Only built one year. Very unique unit. Weighs 3,000#, 90” high, 15’ long. $7,500; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)

1966 Ford F703, rebuilt 330 V8, recent clutch, air brakes set up for 5th wheel or bumper pull. Nice truck, no rust, new rubber gaskets on all windows; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1973 International 1610, with 20 ft van box, 345 cu in engine, 5+2 gears, ready to work, good tires; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1977 Chevrolet Silverado short box half-ton 4x4, 400 cu.in. Automatic trans, 110,000 original miles. Factor 2” lift. 12” wide Ralley wheels. Needs restored, $4000 obo; Daryl nnn-nnn-nnnn (Acme WA)

1980 Ford straight-6 rebuilt engine. Valves ground, head resurfaced, valve cover, manifold, bell housing, alternator, water pump, thermostat housing on head, electric dist. & power packs, $777 obo; Roger nnn-nnn-nnnn (Redding CA)

1983 Dodge Rampage. No dents. New motor. Has electrical problem, $5000; Joe Pereira nnn-nnn-nnnn or Leta nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA)

1986 Ford F350 dually 460 auto. 4 door engine locked up. Upholstery good except driver’s seat. Asking $900, make offer on all or part; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Collection of antique trucks for sale including (1) '47 Ford complete with bed and motor, (3) '56 Ford trucks, (1) with a 3 axle dump bed, (1) each Diesel Diamond T and Diamond Rio trucks. Photos available on request; Don nnn-nnn-nnnn, prefer email contact: xxxx@xxxx.xxx (Fallon NV)

F-head Jeep cylinder heads (2), $50 each; Joe Brick nnn-nnn-nnnn (Klamath Falls OR)

GMC 6V92 engine, 335 hp, starts & runs good, priced to sell, $1500; Terry nnn-nnn-nnnn (Greenacres WA)

Harley Davidson 1981 FXWG Shovelhead. Handlebars need wired and the front brake disks could stand to be replaced. Runs strong, shifts and rides great. Not a completely stock bike but nice shape. Email for pictures, $6500; Tanner Remillard nnn-nnn-nnnn or xxxx@xxxx.xxx (Kennewick WA)

International Scout take-out engine, slant 4, (half of V-8), with tranny & transfer case, includes generator & new Holly carb, $350 obo; Steve Fromhold nnn-nnn-nnnn or cell nnn-nnn-nnnn (Graham WA)

Mag wheels: four cast aluminum mag wheels with Jeep hubcap. 6 hole bolt pattern, 2-3/4" distance apart, complete with mounted tires 65-70% rubber, $250; WF Henderson nnn-nnn-nnnn (Sheridan OR)

Model T Ford top bows, fit 1917 to 1924, $95 or make offer, also some other Model T parts; Dave Gallant nnn-nnn-nnnn (Boring OR)

Samson trucks. I have 2 Samson trucks, one is mostly complete including wooden C cab, the other is an engine, radiator, transmission, chassis, and axles. Both trucks will need a full restoration, they are both somewhat apart. Both trucks are the smaller 3/4 ton model. 1 truck could be built from the two, $ 3950 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Set of truck dual wheel tire chains like new. 112 inches long by 32 inches wide when laid out. $100; Frank nnn-nnn-nnnn (Morgan Hill CA)

Studebaker hoods (2) and trunk lids (2) for a late 40’s –‘48-49?- Champion and ? $75 each obo; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)

Wanted: Mopar Dodge Plymouth 1962-1972 cars and parts buyer. Have cash and trailers can travel. Will buy anything from one piece to a barn full. Parts pieces project cars complete cars. Call me I will see if I can help you out.; Tom Humphreys nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Wanted: Need bed rail caps for a 1999 F350 Long Bed, the pieces that fit on top of bed rails either heavy plastic or aluminum. No one makes aftermarket for this particular truck; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Wanted: Peterbilt bubble nose truck. Looking for a Peterbilt 280/350 bubble nose cab over truck; Kim Kestler nnn-nnn-nnnn (Reno NV)

Wanted: Willys Overland station wagon with 6 cyl engine, 4 wheel drive in restorable condition; Jesse Mason nnn-nnn-nnnn (Tillamook OR)

Wheels: 5 snap ring truck wheels off 1947 Ford truck. 7.50/8.25 x 20, $250; Wendell Newman nnn-nnn-nnnn (Carson City NV)