November 2014 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B for parts, no wheels, everything else is there; Steve Hess nnn-nnn-nnnn (Dayton OR)

Allis Chalmers G, 1948, partially rebuilt, new paint, new tires, some new parts & extras, 3 manuals, $3500; James Martin nnn-nnn-nnnn (SeaTac WA)

Allis Chalmers G, engine shot, no hood, mostly complete, set up as a spray rig, price reduced to $800, consider John Deere trades; Pat Boyle nnn-nnn-nnnn (Washougal WA)

Allis Chalmers WM, 1934, valves ground, tracks good, 15" pads, replaced steering clutch discs and crank start. Sand blasted and painted, $2300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers WM, 1937, valves ground, cylinders honed, rebuilt carb, several steering clutch plates replaced, electric start, sand blasted and painted, $2750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers: Parting out Monarch 35 K. Also have belt pulley attachment off 35 K, $800; Buck nnn-nnn-nnnn (Greenville IL)

American Fordson tractor parts including really nice fenders, $450 pr obo. Rare drag line double drum winch fits the American Fordson tractor, $600. Engine with head and all internals, $300; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Bosch Magnetos for Caterpillar D7/D8 starting engines. One RC-2H Eisemann magneto. Six magnetos in all. $350 for all 6; Chris nnn-nnn-nnnn (Camano Island WA)

Case 300 round nose, very nice unrestored tractor complete with Eagle hitch, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case 310 (crawler) bull gear and axle, been sitting around for years and is slightly rusty but is new, never used, $175. Pics available upon request; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case C wheels: one set of rear steel wheels with extensions, $300; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case C, 1929, complete and stuck, on cut downs to rubber has rare flat belt water pump, $600 obo. Also parting out Case C, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F&H hc245 rear round spoke wheels 9x24, very nice and rare, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case D, 1952, Super straight, original tractor. Runs and drives great. Call or email for more details and pics; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Case G320W tractor loader backhoe, one of 51, ran last winter, tin is good, all rubber is burned, $1950; Karl nnn-nnn-nnnn (Rainier OR)

Case L, 1930, $4,000; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA) [link to photo]

Case SC, SO, SI, D, DV, DI, DO models. Parts: wheels, fenders, small parts; Steve (call evenings) nnn-nnn-nnnn (Boring OR)

Case tractor parts & projects: two 1954 SC Cases, foot clutch & big bore aluminum pistons. Live hydraulics, live PTO & Eagle hitches, $700 for this pair. Case OC, 1953, foot clutch & heart shape front end, $400. Parts for VA, S, LA, D models; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Case VAC, 1946, runs good. New paint, new front tires. good rear tires, $1500. See Photo on craigslist at http://redding.craigslist.org/grd/4650668234.html Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Anderson CA)

Case VAIW & VAI plus parts tractor both tractors are rough but restorable, $1500 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 15 PV, enough parts for two tractors. Two chassis with tracks, one engine together, one engine in parts, two sets fenders, one hood, heads, cams, pistons, gaskets, nut, bolts, etc. Take all, $2400; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 15 tracks, have 3 tracks $275; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 22, 1934, sn 2F 961. Engine, radiator, rear end with sprockets. No rails or tracks, $875; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 22, runs good, undercarriage approx. 50%, blade included, $1800; Jim Olson nnn-nnn-nnnn (Dufur OR)

Caterpillar 30, 10, parting out, mostly castings for 10; Buck nnn-nnn-nnnn (Greenville IL)

Caterpillar 40 diesel wide gauge, engine stuck. Tractor complete, good undercarriage; Mel Freitas nnn-nnn-nnnn (Galt CA)

Caterpillar 6G series wide gauge Thirty. Have had engine running, have not driven tractor. Mostly complete, comes with belly pan, and an extra radiator. Undercarriage fair, sheet metal fair, $2500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 5J series wide gauge tractor. Runs good, has a hydraulic bulldozer blade, brand unknown. Undercarriage fair. Located in Eureka NV, $2500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D4-7U radiator, $600; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar D4-7U, 1952, excellent condition, runs good, $2,000; Jim Olson nnn-nnn-nnnn (Dufur OR)

Caterpillar D7-3T series, 1948. Runs very good. Has electric start pony which runs well. Has hydraulic assist steering, and forward/reverse lever. Undercarriage is good, grousers are a little low. Tractor is bare, no attachments, $3500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95. Photos available by e-mail; Ron nnn-nnn-nnnn or Ron xxxx@xxxx.xxx (Shingletown CA)

Caterpillar R2 6J wide gauge, Isaacson hydraulic blade, Hyster winch, undercarriage poor, motor stuck, $1500; Richard Bombard nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn WA)

Caterpillar tracks, 10" X 6 5/8" pads, 29 pads, two tracks, came from a 2-Ton, $175; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar: Early double drum LeTourneau control unit for Caterpillar Sixty, $450 obo; Other Sixty and Thirty parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Centaur KM tractor, cute little "orphan" tractor, approx. 1940, LeRoi engine, looks good. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)

Cletrac AD 1936 Hercules diesel, hydraulic dozer (Issacson), valves ground, cylinders honed. Diesel pump gone through and adjusted, starter gone through, steering bands replaced, good tracks, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda diesel, valves ground, starter gone through, diesel pump cleaned and gone through and adjusted, set for pressure. Sand blasted and painted. Cylinders honed. Good tracks. $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AG6, good undercarriage, engine has been changed to B-G motor, not running; Mel Freitas nnn-nnn-nnnn (Galt CA)

Cletrac HG-31 crawler with dozer blade, rare narrow gauge. Does not run but motor will turn, been sitting for years. Has fenders, has very nice original tag. Very restorable. $2600 or best reasonable offer, pics available upon request. Can load easily onto trailer, truck, etc, or can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cletrac HG-68 crawler tractor, 1951. Nicely refurbished unit. Has a hydraulic operated 3-point hitch, rear PTO drive shaft, a side pulley drive shaft, but no pulley. Also has street rubber pads on tracks for street use, $9500; Mac nnn-nnn-nnnn (Clarkston WA)

Cletrac W, $5000; Buck nnn-nnn-nnnn (Greenville IL)

Clutch assembly off Allis Chalmers E-60 power unit, $150; Buck nnn-nnn-nnnn (Greenville IL)

Cockshutt 30 & E-3 rear wheel weights, have 3 sets; Al Barkl nnn-nnn-nnnn (Elko NV)

Doodlebug homemade tractor. This machine started life as a 1924 Packard. Has been cut down to make a Doodlebug, using a kit, that includes tracks. The kit made in Vancouver, WA in the late 30's. It has the original Packard engine/transmission/rearend, as well as radiator, shell, cowl, engine cover. Yes, it starts and runs terrific; Ed Barnett nnn-nnn-nnnn (Snohomish WA)

Dozer blade for John Deere Lindeman with mounting brackets, cylinders and pump, $1100; Jim nnn-nnn-nnnn (Dallas OR)

Ensign carbs for Cat 20, 30 all rebuilt $450. D2-D6 battery box covers with thumb screws $80. D2 engine side panels $195 per pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 200: wide front with fast hitch plow, blade, disc and sickle mower. Has trip bucket loader. Nice paint and tires $3500; Fred Gilbertson nnn-nnn-nnnn (Creswell OR)

Farmall 400 diesel runs Factory wide front with Behlen power steering good sheet metal, $1750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall A comes with sickle bar mower, plow, other attachments. Very nice condition, $1450 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall A parts: block and head with cam and oil filter housing, $75. Good crank, $50. Lots of other misc. parts, call and ask; Tony McNeal nnn-nnn-nnnn or xxxx@xxxx.xxx (Amboy WA)

Farmall Cub hydraulics, pulley PTO, good rubber, good engine, $1200; Karl nnn-nnn-nnnn (Rainier OR)

Farmall Cub Lowboy & 1 bottom plow, sn 530, 2nd lowest serial number in US (Red Power Magazine), $5000; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall Cub with belly blade, new tires, runs good, looks good, touch control hyd, $2800; Bob Pierce nnn-nnn-nnnn (Omak WA)

Farmall Cub, 1947, and 10 implements, $4600; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall Cub, 1948, good running tractor, all 4 wheel weights, front blade, 17'' plow, small disk, no rust, always garaged, straight chassis, good tires, $1,900 obo; Jerry nnn-nnn-nnnn or nnn-nnn-nnnn (Washougal WA)

Farmall Cub, good running, painted, decals; Klein Tractor nnn-nnn-nnnn (Rainier OR)

Farmall Cub, sn 86527-1949. Starts and runs good. Good rubber all around (rears are nearly new). Good "touch control" hydraulic lift system. A complete tractor with no missing parts. Comes with Operator's Manual. For everyday use or clean-up for a show tractor, $1,650; Jim nnn-nnn-nnnn (Bremerton WA)

Farmall Decals. Complete sets of the CORRECT decals for the Regular, F-20, F-30, F-12 and F-14. Partial sets for the W-series, O-series, and T-series. These are commercial grade vinyl decals with a UV protective coating. Pictures available by email. Complete sets start at $58. Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

Farmall F12 for parts, $200; Robert Adams nnn-nnn-nnnn (Fresno CA)

Farmall F14, sn FS 45424. Single front wheel. Tires are shot. Tractor is complete except for hood, $400; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Farmall fast-hitch drawbar for SMTA, 300, 400 etc. Very good shape; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall H belt pulley gear box, excellent condition $85. Front radiator shutters and controls for H Farmall. Repainted, excellent, $80; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall H, 1941, with 3 pt disk, rear blade, $3000; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall H, 1944, sn FBH 163438. Crank/magneto start. Runs, $1500; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Farmall H, 1948, sn FBH 274580 x1, magneto/electric start, engine stuck, $1200; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Farmall loader, F-11, no bucket; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall parts: fast hitch drawbar, live hydraulic pump; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall sheet metal from A to 450 plus a bunch of misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super A sn 268325 with International 1000 loader, 3 point hitch with blade and forks for 3 point, $6500; Jim nnn-nnn-nnnn (Dallas OR)

Farmall Super A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Super A, 1953, & plow, sickle mower, $3000; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall Super C with hydraulic push blade, $1100; Garland R. Goesch nnn-nnn-nnnn (Port Townsend WA) [link to photo]

Farmall Super C, 1953, wide front, original books, $3500; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)

Farmall Super H, 1954, excellent running, great paint & decals; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super M, 1953, F-11 loader, rear chains, new front tires; Al Barkl nnn-nnn-nnnn (Elko NV)

Ford 661 runs good , Really smooth factory power steering.Fair rubber sheet metal good New electronic ingition,water pump and 12 volt alternator.$2800.00; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)

Ford 801 series 57-62, runs strong. Very good tires front & back, loader (strong). Will sell loader separately. Must sell quickly; Stu Wade nnn-nnn-nnnn (Chico CA)

Ford 860 tractor, 1955. Great condition. Completely rebuilt and painted. Strong pulling tractor. Many of you have seen it pull at tractor shows. Ready for parades, tractor shows or work. Comes with 6' angle blade, and umbrella, $3950. Call/text Duane Christensen nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR) [link to photo]

Ford 8N 1948. 4 hours on rebuilt engine and new clutch. 12 volt. New instruments and wiring. 4 new tires. Excellent tin, good paint, $3600. Pics available; Ed King nnn-nnn-nnnn (Stockton CA)

Ford 8N tractor, rebuilt. Also, 8N tractor parts: rear axle bearing assembly, reconditioned radiators, hydraulic lift draft control levers, rear brake shoes and linings, many other parts; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 9N, 8N pair of wheels and tires, $100; Warren Harger nnn-nnn-nnnn (Central Point OR)

Ford Model T frame with rear axle, $450; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Ford NAA Golden Jubilee, 1953, starts and works OK, unrestored, 6V alternator, High Crop type with new tall rear tires and rims. Repaired front axle from damage. Water pump noisy and clutch jumps a little, $1850. Photos by email. Dave Erickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)

Ford NAA, very good condition. Good tires, straight original condition. Live hyd. good oil pressure, no smoke, $2500; Bob Pierce nnn-nnn-nnnn (Omak WA)

Ford tractor for parts, not running, $500; Jack nnn-nnn-nnnn or xxxx@xxxx.xxx (Central Point OR)

Fordson Trackson crawler, 1927, all complete with great paint, owned over 25 years, was running great when stored, $6500; Mike Tyler nnn-nnn-nnnn (Moore MT) [link to photo]

Fordson, 1918. Nice original, unrestored tractor. Running. This unit has all the correct, early tractor parts. Call or email for more details and pics; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Grille for John Deere 110, NOS, part #M1906T, $40; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Hydraulic engine side-mount pump for Ford 600 series tractor, $75; William Henderson nnn-nnn-nnnn (Sheridan OR)

IH Farmall 230, 1957, wide front tractor, sn 1287J with C-123 gas engine. Also includes a rear blade useful for grading or leveling. The tractor is in good original condition and runs well; it was converted from 6 volt to 12 volt system, tires are good, sheet metal is good. These were built from 1956 -1958 with just over 7000 built making it more collectible. Asking $2850 obo (fully restored models are selling for around $5,000); Dan nnn-nnn-nnnn for details or photos (Tigard OR)

International 560 Wheatland Diesel. Has had PTO added, $4500; Chris nnn-nnn-nnnn (Camano Island WA)

International Cub, 1966, several new parts, new tires & wheel weights; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

International T-20 needs work, $500; Mel Freitas nnn-nnn-nnnn (Galt CA)

International T6 crawler recently restored, good undercarriage, sprockets fair, $1295 obo; will sell complete crawler with blade for $1995 obo; Roger nnn-nnn-nnnn (Redding CA) [link to photo]

International T6 dozer blade complete with pump, tank, new hoses & valve, what you see here minus the crawler, $825 obo; Roger nnn-nnn-nnnn (Redding CA) [link to photo]

International TD9 Series II dozer, direct elect start, torque converter trans, 25T winch, cage, sweeps, very tall/good grousers, pins and bushings are round, runs, manual tilt blade, but no power to the left final. I will load onto your lowboy, $3875; Fred nnn-nnn-nnnn (Enumclaw WA)

International TD-6 series II direct start 6 cyl. Diesel hydraulic blade with hydraulic tilt built up grousers-good yellow paints engine wants to lope at idle. Probably needs adjustment on governor. Good solid dozer, $4250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 1010 gas, one-owner, barn kept, comes with owner and shop manual in good mechanical shape, has original paint, only 1900 hrs, $4000; Todd Hodges nnn-nnn-nnnn or xxxx@xxxx.xxx (Decatur TX)

John Deere 1927 parts tractor with good 12 spoke rear wheels, includes some other parts $1500; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere 2 cylinder crawler parts. Sell one part or all as I am cleaning out; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 320U, sn 322131, good wheels/rubber, runs good, factory foot throttle, orchard exhaust, original condition. Collectable, $6000. John Deere 320U, sn 320298, original condition, 3 pt., front weight, good rubber/wheels, starts, runs excellent. Low production tractor/ good investment, $6000; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere 4010. Loader, plowed, hayed, now ready to sell, $8500; Klein Tractor nnn-nnn-nnnn (Rainier OR)

John Deere 40C with loader, 3 pt & pto., good undercarriage, starts easy, everything works, all there, sheet metal in good shape, $4500; Ronald Snow nnn-nnn-nnnn (Kent WA)

John Deere 420C complete engine with radiator. Good oil pressure, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420U slant steer, new tires, engine over hauled, new paint 5 years ago, ower steering, apart and needs repair. May need brake work. Restore or part out, $2500; Jim nnn-nnn-nnnn (Santa Barbara CA)

John Deere 420U with factory loader & JD rear blade. Runs very good, has power steering & live hyd. Good oil pressure, no smoke. Tires are good but weather checked, $3500 with blade, $3200 without; Robert C Pierce nnn-nnn-nnnn (Omak WA)

John Deere 420W 1956 rare navy tractor. Only 124 made for the Navy Dept. by John Deere and is Industrial Yellow in color. Complete restoration, excellent starting & running in top condition. I have owned it for the last 36 yrs. & has always been garage kept. I also have the original parts & owner’s manual (not reproductions). If interested in how rare these tractors are check out the Sept./Oct. 2003 addition of the Two-Cylinder Club magazine. (You can do that on line). Have lots of pictures from start to finish & was professionally restored. Please only interested buyers, $25,000; Don Harmon nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond OR)

John Deere 60 parted out, lots left: crank, head, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 60 wide front, excellent sheet metal, recent engine work. Very handsome John Deere ready for proper restoration, $3975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 70 crankshaft good spline. Measures good. Pt F1223R, $300; Gene nnn-nnn-nnnn (Davenport WA)

John Deere 820 diesel, I958, Pony start, both engines run great, new rubber all the way around, big rubber on rear, 23.1 x 26. Getting old thinning down my little collection, $11,000; Dee Schuyler nnn-nnn-nnnn (Lompoc CA) [link to photo]

John Deere A, 1936 parts tractor, mostly complete minus cylinder head, valve train, air cleaner bottom and Rh brake assembly. Has part of Bee gee hydraulic unit, $500; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere A, 1946, running condition, good paint, clean, $2000; Joe Pereira nnn-nnn-nnnn or Leta nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA) [link to photo]

John Deere A, 1947, sn 579165. Bucket, tiller, and cutter available, still runs. Comes with original operator's manual, $2,500. Please email for information and pictures. Email preferred; call between 4pm - 9 pm, please; Alice nnn-nnn-nnnn or xxxx@xxxx.xxx (Montague CA)

John Deere A, 1951, sn 682311, runs good, fresh paint. New front tire, seat upholstery, 12v alt, & battery. Rebuilt starter and carb, $5,000 obo; John nnn-nnn-nnnn (Lodi CA) [link to photo]

John Deere A, used clutch pulley, $225; Buck nnn-nnn-nnnn (Greenville IL)

John Deere AO, barn fresh,1947 unstyled, loose, tires hold air, hard to find, $3500; Fred nnn-nnn-nnnn (Enumclaw WA)

John Deere AW, 1949, with round tube wide front end, $2400. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)

John Deere B roll-o-matic, $100; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

John Deere B Schebler carburetor, $90; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1950, for parts. Missing rear wheel & carb, otherwise complete; Steve Hess nnn-nnn-nnnn (Dayton OR)

John Deere B, early style, short frame, runs good, $1100; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)

John Deere B, has BWH front end with one long extension, not running, $2500 for complete tractor, front end available separately. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)

John Deere B, stuck motor, good tires, mag & carb, $495; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

John Deere B. Single front wheel needs tires. Sheet metal is straight, $1500; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere D, 1935, on cut downs, complete, not stuck. Comes with brand new fenders & hood, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1938, sn 139045. Tractor in very nice shape, new rubber all the way around, great starter and runner, $4500; Dee Schuyler nnn-nnn-nnnn (Lompoc CA) [link to photo]

John Deere D, 1947 styled, parting out whole tractor electric start; Phil DoMoe nnn-nnn-nnnn (Red Bluff CA)

John Deere D, 1947, not running, needs back tires, tractor motor not stuck, tin okay; Mel Freitas nnn-nnn-nnnn (Galt CA)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere front wheel weights, fit 16” wheels. Also have a new brake band to fit a JD 440 crawler or 420 crawler, or maybe a JD 40, $125; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere GP NOS clutch pulley – belt pulley, $300; Buck nnn-nnn-nnnn (Greenville IL)

John Deere L, runs good, $1100; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)

John Deere LA 1946 with tag. Motor turns over but not started for several years, no attachments. $1200; Richard Bombard nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn WA)

John Deere MC with toolbar blade & cultivator attachment for toolbar, pto winch, original undercarriage good runs, turns, blade & winch work, needs carb work and has exhaust leak, $4000; Ronald Snow nnn-nnn-nnnn or xxxx@xxxx.xxx (Kent WA)

John Deere M or MT starter SN-1107064, all new parts, $350; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere M, 1948, runs good with good sheet metal and tires, older restoration, $2750. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)

John Deere MT, 1950, sn 22550 with 2-bottom plow. Side mount mower may be available. One new rear tire, other tires are fine. Tractor runs fine, needs TLC. Hyd works, $1250; Tom Butterfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Joseph OR)

John Deere parts: Flathead part # F486 R USG, $300. Vertical manifold for JD 40-M, $40. JD air pump w/hose part # 6688, $100. Weights 8-75# slab, $50 apiece. 8- 100# suitcase, $75 apiece; Glen nnn-nnn-nnnn (Moses Lake WA) [see photos]

John Deere tractor with 3 pt hitch, tires fair to good, narrow front, $4000; JH Keith nnn-nnn-nnnn (Hermiston OR)

John Deere tractors: JD AOS, 36th one made, engine stuck, no batwings or nosecone. Best offer or trade. John Deere B, 1947, $500. John Deere BNH, 1947, $1750. John Deere BW, 1946, ant eater front, $1250. John Deere B, 1949, $1200. John Deere R, 1949, $2500. John Deere AO, 1936, $2750. John Deere HN, 1942, $2500. John Deere B, 1943 on steel $2750. JD M with Henderson loader, $1200; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere: Parting out 1951 late-styled John Deere B dual wheel tricycle, 1940 John Deere H, and 1946 John Deere LA. We will be at Woodland and Tulare swap meets and could deliver parts there; Patrick nnn-nnn-nnnn xxxx@xxxx.xxx or John nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)

Kubota L245, L295 parts POR, used loader off L295, $1,500, also Kubota B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Magneto for Cat D2 and D4 staring motor $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 35 diesel. 3 pt. Overriding clutch, very good sheet metal, good front wheels and tires. Good rear tires on spin-out wheels. Runs good, $2975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Ferguson 35, 1964, has box scraper, cultivator, running, new tires on front, $1500; Albert Horley nnn-nnn-nnnn (Hollister CA)

Massey Ferguson 35, gas, alternator, good tires, has been used all summer, $2800; Karl nnn-nnn-nnnn (Rainier OR)

Massey Ferguson 35, gas, used all season, $2200; Klein Tractor nnn-nnn-nnnn (Rainier OR)

Massey Ferguson 65, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris General Purpose 4WD 1931 tractor. Has been completely gone through. All new bearings, hood, gas tank, radiator, tool box. Engine rebuilt with new pistons, rods, rings, spark plugs, wires, crank turned, bored 40 thousands over. Water pump and governor rebuilt. Carb and mag professionally rebuilt. Just needs paint to finish restoration. Excellent condition. Pics on request; Tom nnn-nnn-nnnn or xxxx@xxxx.xxx (Perth-Andover NB)

McCormick Deering 10-20 1928 Runs good $1,850.00 also have extra parts for sale; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA) [link to photo]

McCormick Deering 15-30, 1924, from Godfrey Humman Collection. Should run easily, very little rust, complete, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick Deering 22-36, 1934, from Godfrey Humman Collection. Should run easily, very little rust, complete, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick Deering Farmall F-12 in good condition. Runs good, all original parts, $1900 obo; Wes Green nnn-nnn-nnnn (McKinleyville CA) [link to photo]

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-12, 1937. In storage since painted, $3500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1000. McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $650. McCormick Deering O-4, parting out: batwings/engine side panels, orchard belt pulley, hood, shutters, all-fuel manifold, exhaust elbow plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-S4, 1948. In storage since painted, $3500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick Deering OS-6, sn O BK S 15885. Tires are shot. Complete except for the belt pulley. Pulley gears, control and housing is there, $400; Wilbur Reil nnn-nnn-nnnn (Davis CA)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering tractors, have 3, not running; Mel Freitas nnn-nnn-nnnn (Galt CA)

Minneapolis 17-30 Type B Cross Motor, sn 5712. Year 1926/1927. Ran 1 year ago. New head gasket and valves were lapsed at that time. Complete except for seat. In good shape, $12,500; Bill Standish nnn-nnn-nnnn or xxxx@xxxx.xxx (Rathdrum ID)

Minneapolis Moline M5 diesel, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Minneapolis Moline UTS special. Big full fender tractor with good sheet metal. PTO and remote hydraulics, $1750; Warren Harger nnn-nnn-nnnn (Central Point OR)

Oliver 1900 in good condition: $5000 or trade for cows or ?? This tractor still runs great! We have farmed with it for the last few years. GM 88 hp Diesel Detroit engine. Checkerboard tractor that sill has good tires! Has a 3 point and dual speed PTO the body is in good shape. Wide not row crop front end. No power steering. This is a great pulling tractor! For pictures and information call, text or email me; Matt Deebach nnn-nnn-nnnn or xxxx@xxxx.xxx (Tonasket WA)

Oliver 60 row crop narrow front. Engine turns over, not running, has PTO, $400; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Oliver 70, 1945, runs well, tin in near perfect shape, new tires and extra block included, reduced to $3000; Hank Darmer nnn-nnn-nnnn (Federal Way WA) [link to photo]

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold $7200 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver HG with dozer blade, good undercarriage, straight tinwork. Operates as it should, starts and runs good, good oil pressure. It smokes and uses oil, probably due for a set of rings; will still push a blade full of dirt. Steers good, has belt pulley and p.t.o. I can e-mail pictures, $2500; Bob Pierce nnn-nnn-nnnn (Omak WA)

Oliver HG-68 crawler, 1951. Nicely refurbished. Has a hydraulic operated 3-pt hitch, rear PTO drive shaft, a side pulley drive shaft, but no pulley. Also has street rubber pads on tracks for street use, $9500; Mac nnn-nnn-nnnn (Clarkston WA)

Oliver OC3 crawlers parts, Sell one part or all as I am cleaning out; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver Super 55 gas with loader not running, complete with 3 pt. hitch decent sheet metal, probably won't take much to get it running, $1450 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Radio: Tractor radio: fender mounted, AM, beautiful tone 12V, antenna, and painted Ford Blue. $50 firm; Fred Gilbertson nnn-nnn-nnnn (Creswell OR)

Repair parts for Borg Warner T96-1C three speed top load transmission: case, input shaft, top shifter assembly, misc small parts, $55; Hardy nnn-nnn-nnnn (Sutter CA)

Tires/tubes/rims: one 10-20 tire tube & rim, good shape, $95. one 12.4/11-28 tube tire & rim, good, $125. One 10-28 tube tire rim excellent shape, $150. One 11.2x28 tire only, very good, $100. Two 11.2x28 tube tire & rim 9N, good, $125; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

Tires: 13.9-36's, 75% matched tread on Double Bevel rims  JD cast centers for rack and pinion axle, $650 all or separate; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Tires: 500x12 tires off old walk behind rototiller or tractor with the tractor lug cross design, might be original and very old but look very, very good, comes with 5 lug wheels all painted up, $100 for the pair, pics upon request; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Tractors: Leader, 1940's, runs, good shape. Gibson EF, 1940's, runs, nice. Minneapolis 17-30 B, 1920's. Oliver 60 standard, 1940's, very nice, runs. Allis Chalmers, 20-35, 1929, runs. John Deere BO Lindeman, 1940's, wide gauge, runs. Ford Jubilee, 1953, very nice, runs. Ford 850, 1956, newer rebuilt engine, 12 volt, runs very nice; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Volvo tractor for parts only, Type BM/Volvo 425, sn 6592 throw-out bearing back, plus wide front end, hood has dent, some engine parts, no radiator. The back end has wheels with one tire that holds air, 3 point and top link, too many projects, $100 obo; Steve Fromhold nnn-nnn-nnnn or cell nnn-nnn-nnnn (Graham WA)

Wagner W9, new tires, good sheet metal, 4 cyl Cummings, $10,000; Gene nnn-nnn-nnnn (Davenport WA)

Weights: 3 sets of Cockshutt weights, approx 300 lbs per set; Al Barkl nnn-nnn-nnnn (Elko NV)

Wheel weights, pair of Wilkerson Nutwell, Fresno CA. AC 22 cast into the weights. Allis Chalmers 22?? $150 pair. Also wheel weights, pair of Wilkerson Nutwell, Fresno, CA, No FR 3 fits Ford 8N, possibly others, $100 pair; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Wheel weights: One pair of rear wheel weights for A or B Farmall $100; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Wheel weights: rear, extra heavy off of Minnie MF. Front wheel bracket & weights off Minnie 4-Star; Buck nnn-nnn-nnnn (Greenville IL)

Wheels: full set of F & H wheels to fit 6-spline John Deere D, $700; Gene nnn-nnn-nnnn (Davenport WA)

Wheels: Two large rear tractor wheels, 28 ˝” x 17” wide. 8 hole lug pattern. May be from self-propelled combine. Excellent condition $200; Wendell Newman nnn-nnn-nnnn (Carson City NV)