November 2014 - Engines & Parts For Sale

All Classified Ads

Detroit 6 hp antique flywheeler complete except gas tank and cooling tower, $500; Robert Adams nnn-nnn-nnnn (Fresno CA)

Fairbanks 10 hp engine on cart, $1800; Jim nnn-nnn-nnnn (Dallas OR)

Fairbanks 4 hp, on iron-wheeled wagon. Missing trip arm, otherwise complete. Embossed script 'Fairbanks' on water hopper. Photos available, $1250; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fairbanks Morse 1.5 hp, mfd 1924. Runs good, needs fuel tank, $425; Scott nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

Fairbanks Morse 1-1/2 hp Z headless crank & flywheels $50 obo; Tony McNeal nnn-nnn-nnnn or xxxx@xxxx.xxx (Amboy WA)

Fairbanks Morse Eclipse #1 vertical 1-1/2 hp hit & miss. New paint & cart, $700; Dale Somers nnn-nnn-nnnn (Medford OR)

Fairbanks-Morse 3 hp Z, 1918, early plugoscillator engine which has an aftermarket factory made WICO EK conversion, the cast magneto bracket is a direct replacement for the plugoscillator, was a complete running engine when I took it apart to paint many years ago, just needs to be reassembled, $600; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)

Frisco Standard Gas engine, 5 hp, built in San Francisco circa 1915. This engine is in excellent original and running condition. It still shows original paint and patina and is totally complete with original parts. I found this engine when it was still in the fishing boat 20+ years ago. It was used on the Columbia River in fresh water. You can view this engine being started and running at http://youtu.be/obbBTQjtCQw .$6500; Bill Prine nnn-nnn-nnnn or xxxx@xxxx.xxx (Amity OR)

IHC McCormick Deering LB 1-1/2 to 2-1/2 hp engine. It was built in 1948, sn LBA 132177. It is complete, turns over, has belt pulley and new cast iron hopper cover. It was running, but has a cracked spark plug (including a new spark plug, along with a manual, so it should be easy to get it running again). Engine weighs around 200 lb, so local pickup is preferred, but we might be able to deliver depending on location, $350 obo; Dan nnn-nnn-nnnn for details or photos (Tigard OR)

John Deere 1.5 hp, mfd 1929. Runs great, looks good in its work clothes, $900 obo; Scott nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

John Deere 3 hp engine on cart, $1750 firm; Terry nnn-nnn-nnnn (Greenacres WA)

McCormick Deering 1-1/2 hp crank and flywheels, $50 obo. Bare block on nice skids, $75 obo; Tony McNeal nnn-nnn-nnnn or xxxx@xxxx.xxx (Amboy WA)

McCormick Deering 1-1/2 hp, 500 rpm, sn W1840, Wico mag, $750; Don nnn-nnn-nnnn (Newberg OR)

McCormick Deering 2 hp engine. Loose, needs a coil to run, $400 obo; Chris nnn-nnn-nnnn (Camano Island WA)

Novo 4-cylinder, 4-cycle gasoline engine, sn CW1332828. 3-1/4" bore x 4" stroke. Believed to be about 20-25 hp at 2500 rpm. This is a complete running engine, with Holley carburetor and Fairbanks-Morse magneto. Engine was believed to have been mounted on a decontamination sprayer (orchard type sprayer) and was sent to Adak AK at the beginning of the Cold War in the 1940s. It appears to have been hardly used (some original paint still on the exhaust manifold), and shows no wear and tear. This engine is "free to a good home". I would like to see someone put the engine to use or display. I don't want to see it go to a scrap dealer; Jim nnn-nnn-nnnn (Bremerton WA)

Root and VanDervoort, 4 hp, 400 rpm, 1913, made for John Deere Plow Co,. in good running condition with 1,000 lb trailer. $2,500 for engine and trailer; Ivan Millich nnn-nnn-nnnn (Campbell CA) [link to photo]

Vaughn drag saw, with blade. Turns over, should run. Best offer takes it; Chris nnn-nnn-nnnn (Camano Island WA)

Waterloo Boy 4.5 hp complete engine on iron-wheel wagon. Webster mag rebuilt. Nice running engine. She's in her farm attire (old iron patina). Photos available, $1650; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)