December 2014 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1950, restored. Reconditioned engine, like new tires, paint and decals the proper color for the year. Tractor was completely disassembled except the final drives and kept as original as possible. Pictures and more detail available on request, $3500; Dennis Kytola nnn-nnn-nnnn (Ridgefield WA)

Allis Chalmers WM, 1934, valves ground, tracks good, 15" pads, replaced steering clutch discs and crank start. Sand blasted and painted, $2300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers WM, 1937, valves ground, cylinders honed, rebuilt carb, several steering clutch plates replaced, electric start, sand blasted and painted, $2750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

American Fordson tractor parts including really nice fenders, $450 pr obo. Rare drag line double drum winch fits the American Fordson tractor, $600. Engine with head and all internals, $300; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Axle and Bull gear for Case 310 or 350 crawler dozer, like new, $175; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Bosch Magnetos for Caterpillar D7/D8 starting engines. One RC-2H Eisemann magneto. Six magnetos in all. $350 for all 6; Chris nnn-nnn-nnnn (Camano Island WA)

Bull Gear for John Deere two cylinder crawler, very good, pics available, $125; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case 300 round nose, very nice unrestored tractor complete with Eagle hitch, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case C wheels: one set of rear steel wheels with extensions, $300; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case C, 1929, complete and stuck, on cut downs to rubber has rare flat belt water pump, $600 obo. Also parting out Case C, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F&H hc245 rear round spoke wheels 9x24, very nice and rare, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case D, 1952, Super straight, original tractor. Runs and drives great. Call or email for more details and pics; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Case G320W tractor loader backhoe, one of 51, ran last winter, tin is good, all rubber is burned, $1950; Karl nnn-nnn-nnnn (Rainier OR)

Case G320W. Tractor backhoe one of fifty. Runs and drives. Needs all rubber products replaced, $1250 or offer or trades; Klein Tractor nnn-nnn-nnnn (Rainier OR)

Case L, 1930, $4,000; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA) [link to photo]

Case tractor parts & projects: two 1954 SC Cases, foot clutch & big bore aluminum pistons. Live hydraulics, live PTO & Eagle hitches, $700 for this pair. Case OC, 1953, foot clutch & heart shape front end, $400. Parts for VA, S, LA, D models; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Case VAC, 1946, runs good. New paint, new front tires. good rear tires, $1500. See Photo on craigslist at http://redding.craigslist.org/grd/4650668234.html Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Anderson CA)

Case VAI Industrial tractor with front street sweeper attachment, extra brush. Just in, call for details; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Case VAIW & VAI plus parts tractor both tractors are rough but restorable, $1500 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case wide tread tractor, 1936, on steel. Also has a set of rubber tires & wheels, $5500; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 15 PV, enough parts for two tractors. Two chassis with tracks, one engine together, one engine in parts, two sets fenders, one hood, heads, cams, pistons, gaskets, nut, bolts, etc. Take all, $2400; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 15 tracks, have 3 tracks $275; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 22 project tractor, complete, excellent tractor, was going to restore but now unable, $1500 or possible trade; Don Travis nnn-nnn-nnnn (Fallon NV)

Caterpillar 22, 1934, sn 2F 961. Engine, radiator, rear end with sprockets. No rails or tracks, $875; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 22, runs good, undercarriage approx. 50%, blade included, $1800; Jim Olson nnn-nnn-nnnn (Dufur OR)

Caterpillar D2 5J series wide gauge tractor. Runs good, has a hydraulic bulldozer blade, brand unknown. Undercarriage fair. Located in Eureka NV, $2500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 engine side panels $195 per pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D4-7U radiator, $600; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar D4-7U, 1952, excellent condition, runs good, $2,000; Jim Olson nnn-nnn-nnnn (Dufur OR)

Caterpillar D7-3T series, 1948. Runs very good. Has electric start pony which runs well. Has hydraulic assist steering, and forward/reverse lever. Undercarriage is good, grousers are a little low. Tractor is bare, no attachments, $3500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar tracks, 10" X 6 5/8" pads, 29 pads, two tracks, came from a 2-Ton, $175; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar: Early double drum LeTourneau control unit for Caterpillar Sixty, $450 obo; Other Sixty and Thirty parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Centaur KM tractor, cute little "orphan" tractor, approx. 1940, LeRoi engine, looks good. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)

Cletrac AD 1936 Hercules diesel, hydraulic dozer (Issacson), valves ground, cylinders honed. Diesel pump gone through and adjusted, starter gone through, steering bands replaced, good tracks, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda diesel, valves ground, starter gone through, diesel pump cleaned and gone through and adjusted, set for pressure. Sand blasted and painted. Cylinders honed. Good tracks. $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac HG31, very rare narrow gauge crawler dozer, has nice original tag, dozer blade, been sitting for years not running but motor will turn, has fenders, tracks good. Would make nice restoration. $2200. Pics available; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cletrac HG-68 crawler tractor, 1951. Nicely refurbished unit. Has a hydraulic operated 3-point hitch, rear PTO drive shaft, a side pulley drive shaft, but no pulley. Also has street rubber pads on tracks for street use, $9500; Mac nnn-nnn-nnnn (Clarkston WA)

Cockshutt 30 & E-3 rear wheel weights, have 3 sets; Al Barkl nnn-nnn-nnnn (Elko NV)

Collection of original Caterpillar Manuals for early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25.00 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)

Doodlebug homemade tractor. This machine started life as a 1924 Packard. Has been cut down to make a Doodlebug, using a kit, that includes tracks. The kit made in Vancouver, WA in the late 30's. It has the original Packard engine/transmission/rearend, as well as radiator, shell, cowl, engine cover. Yes, it starts and runs terrific; Ed Barnett nnn-nnn-nnnn (Snohomish WA)

Ensign carbs for Cat 20, 30 all rebuilt $450. D2-D6 battery box covers with thumb screws $80; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 400 diesel runs Factory wide front with Behlen power steering good sheet metal, $1750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall A comes with sickle bar mower, plow, other attachments. Very nice condition, $1450 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall A parts: block and head with cam and oil filter housing, $75. Good crank, $50. Lots of other misc. parts, call and ask; Tony McNeal nnn-nnn-nnnn or xxxx@xxxx.xxx (Amboy WA)

Farmall AV 1952, new front tires, gauges, kill switch, seat, steering wheel, breather cap, gas cap, radiator cap, front wheel weights, rears if wanted. Reconditioned cultivators, magneto, starter, 3 lights, every bolt and nut will turn. Cream puff!! Just needs paint. Tin is perfect, $2650 obo; Roger nnn-nnn-nnnn (Redding CA) [link to photo]

Farmall Cub hydraulics, pulley PTO, good rubber, good engine, $1200; Karl nnn-nnn-nnnn (Rainier OR)

Farmall Cub with belly blade, new tires, runs good, looks good, touch control hyd, $2800; Bob Pierce nnn-nnn-nnnn (Omak WA)

Farmall Cub, hydraulics, cultivators, PTO pulley. Runs great $1100 or offer or trades; Klein Tractor nnn-nnn-nnnn (Rainier OR)

Farmall Decals. Complete sets of the CORRECT decals for the Regular, F-20, F-30, F-12 and F-14. Partial sets for the W-series, O-series, and T-series. These are commercial grade vinyl decals with a UV protective coating. Pictures available by email. Complete sets start at $58. Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

Farmall F 14, sn FS 45424. Single front wheel. Tires are shot. Tractor is complete except for hood, $400. Also the mowing machine for Farmall F 14. 7 foot bar. Complete except for wood arm, $100. PTO unit that bolts to the back of tractor; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Farmall fast-hitch drawbar for SMTA, 300, 400 etc. Very good shape; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall H, 1944, sn FBH 163438. Crank/magneto start. Runs, $1500; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Farmall H, 1948, sn FBH 274580 x1, magneto/electric start, engine stuck, $1200; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Farmall live hydraulic pump fast hitch parts, drawbar, $50-$100; Al nnn-nnn-nnnn (Elko NV)

Farmall loader, F-11, no bucket; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall parts: fast hitch drawbar, live hydraulic pump; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall sheet metal from A to 450 plus a bunch of misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Super H, 1954, excellent running, great paint & decals; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super H, 1954, restored, $4850; Al nnn-nnn-nnnn (Elko NV)

Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super M, 1953, F-11 loader, rear chains, new front tires; Al Barkl nnn-nnn-nnnn (Elko NV)

Ferguson F35, OHV engine, 3+2 transmission, good tin, tires, and paint, $3100; David Gibson nnn-nnn-nnnn leave message (Morgan Hill CA)

Ferguson TO-30 and rear half of a TO-20 parting out. Some tin in fair to good condition. Engine, transmission, rear end, fuel tank with toolbox, dash, steering, etc. No lights or wheels. Reasonable prices or trades, obo. Open to deal, prefer you pickup but may be able to ship smaller parts. Don't make me haul this stuff to Tulare; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Ferguson TO-30 farm tractor, been sitting for four years, clutch went out, tractor looks good, holds coolant, oil looks good, has Continental Z129 engine. Engine ran fine when quit using. Good rubber and rims, pics available, $850 as is; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Ferguson TO-30, one owner (Lundy, Madras OR). Runs great. Original lights work. Good tin, front tires great, rear tires 50% or less. Needs new paint, $2200; Dennis nnn-nnn-nnnn (Powell Butte OR)

Ford 1953 Golden Jubilee with hydraulic front blade that angles and offsets. Nice set up with power down! Also has a fully functional Scout backhoe; works great. Tractor has excellent sheet metal and runs like a top. Call or email for pictures, $3750; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Ford 3 cylinder engine, 201, gas, new, never ran, complete, came in Ford 4000 and 3000 tractors, $1000; Larry Manley nnn-nnn-nnnn (Dorris CA)

Ford 661 runs good , Really smooth factory power steering.Fair rubber sheet metal good New electronic ingition,water pump and 12 volt alternator.$2800.00; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)

Ford 661 runs good. Really smooth factory power steering. Fair rubber sheet metal good. New electronic ignition, water pump and 12 volt alternator, $2800; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)

Ford 8N (early) nicely restored, new tires, $3000 Email or call for pictures; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Ford 8N restored, new tires $3000 email for pictures; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Ford 8N, 1948, with dealer installed, when tractor was new, high clearance option. Bought from original owner. Tractor restored in 1992 and kept in garage. 38" rears and 19" fronts. Runs perfect on 6 volt system. Has Sherman Cable Shift step down with dip stick and drain plug for the Sherman. Tractor has many unique options. Can e-mail more photos. $8500; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA) [link to photo]

Ford 9N with Dearborn belly mount sickle mower. Just in; call for details; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Ford Model T frame with rear axle, $450; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Ford NAA, very good condition. Good tires, straight original condition. Live hyd. good oil pressure, no smoke, $2500; Bob Pierce nnn-nnn-nnnn (Omak WA)

Fordson Trackson crawler, 1927, all complete with great paint, owned over 25 years, was running great when stored, price reduced to $5900; Mike Tyler nnn-nnn-nnnn (Moore MT) [link to photo]

Fordson, 1918. Nice original, unrestored tractor. Running. This unit has all the correct, early tractor parts. Call or email for more details and pics; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Grille for John Deere 110, NOS, part #M1906T, $40; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

IH Farmall 230, 1957, wide front tractor, sn 1287J with C-123 gas engine. Also includes a rear blade useful for grading or leveling. The tractor is in good original condition and runs well; it was converted from 6 volt to 12 volt system, tires are good, sheet metal is good. These were built from 1956 -1958 with just over 7000 built making it more collectible. Asking $2850 obo (fully restored models are selling for around $5,000); Dan nnn-nnn-nnnn for details or photos (Tigard OR)

International 300 Utility with power steering and a nice loader. Sheet metal good. Tractor runs good, tires ok, $4000; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

International 350 Hi-Utility fast hitch 1 remote runs, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 560 Wheatland Diesel. Has had PTO added, $4500; Chris nnn-nnn-nnnn (Camano Island WA)

International Super A, 5’ Woods underbody mower, 4’-8” push blade. This is a very good running/operating tractor, $2150; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)

International TD-9, hydraulic angle dozer, engine stuck, need final, have all the parts to repair, have spare engine, $1000; Larry Manley nnn-nnn-nnnn (Dorris CA)

International TD-6 series II direct start 6 cyl. Diesel hydraulic blade with hydraulic tilt built up grousers-good yellow paints engine wants to lope at idle. Probably needs adjustment on governor. Good solid dozer, $4250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 1010 gas, one-owner, barn kept, comes with owner and shop manual in good mechanical shape, has original paint, only 1900 hrs, $4000; Todd Hodges nnn-nnn-nnnn or xxxx@xxxx.xxx (Decatur TX)

John Deere 1927 parts tractor with good 12 spoke rear wheels, includes some other parts $1500; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere 2 cylinder crawler parts. Sell one part or all as I am cleaning out; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 40 cylinder head (#M-1768T), no cracks or repairs, will need new exhaust seats, $100. Exhaust manifold (M-1799T), sound, $65. Carburetor (TSX-530), $50. Grille (fits 40C-U-S), one piece screen, needs new screen, $100. 40 fuel tank, clean inside, $50; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere 40C with loader, 3 pt & pto., good undercarriage, starts easy, everything works, all there, sheet metal in good shape, $4500; Ronald Snow nnn-nnn-nnnn (Kent WA)

John Deere 420C complete engine with radiator. Good oil pressure, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420U slant steer, new tires, engine over hauled, new paint 5 years ago, ower steering, apart and needs repair. May need brake work. Restore or part out, $2500; Jim nnn-nnn-nnnn (Santa Barbara CA)

John Deere 420U with factory loader & JD rear blade. Runs very good, has power steering & live hyd. Good oil pressure, no smoke. Tires are good but weather checked, $3500 with blade, $3200 without; Robert C Pierce nnn-nnn-nnnn (Omak WA)

John Deere 60 parted out, lots left: crank, head, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 60 wide front, excellent sheet metal, recent engine work. Very handsome John Deere ready for proper restoration, $3975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 820 black dash tractor. Both engines rebuilt, 12 wheel weights, power steering, float ride seat, and cyl bracket. Good rust free tractor $8000; Russell Turner nnn-nnn-nnnn (McArthur CA)

John Deere A, 1936 parts tractor, mostly complete minus cylinder head, valve train, air cleaner bottom and Rh brake assembly. Has part of Bee gee hydraulic unit, $500; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere A, late style '51-52 parting out. No sheet metal or front pedestal. Front pressed steel frame, no cracks or welds, $75; Dale Longhurst nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta UT)

John Deere A, unstyled, parting out. Has F&H cast iron front wheels, but no rims no gas tank, carb or mag; Dale Longhurst nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta UT)

John Deere AW, 1949, with round tube wide front end, $2400. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)

John Deere B roll-o-matic, $100; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

John Deere B Schebler carburetor, $90; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere B, 1937, runs good, ready for restoration, $1800; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, early style, short frame, runs good, $1100; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)

John Deere B, early styled, parting out. Has sheet metal, no head or block; Dale Longhurst nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta UT)

John Deere B, has BWH front end with one long extension, not running, $2500 for complete tractor, front end available separately. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)

John Deere BN, sn 268706, 1950. Engine overhauled. Starter, magneto, carburetor, generator overhauled. Original 3 point, auxiliary oil pump. One remote. Repainted, $4000; KD Cowan nnn-nnn-nnnn (Grandview WA)

John Deere BO Lindeman frame $400 or offer; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere D, 1935, on cut downs, complete, not stuck. Comes with brand new fenders & hood, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere G, 1946, runs great, $1800; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere L, runs good, $1100; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)

John Deere Lindeman crawler, sn 336407. Excellent condition, runs hand start, good tracks, no blade, $7,000 or offer. Call after 3PM; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere M or MT starter SN-1107064, all new parts, $350; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere M, 1948, runs good with good sheet metal and tires, older restoration, $2750. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)

John Deere MC with toolbar blade & cultivator attachment for toolbar, pto winch, original undercarriage good runs, turns, blade & winch work, needs carb work and has exhaust leak, $4000; Ronald Snow nnn-nnn-nnnn or xxxx@xxxx.xxx (Kent WA)

John Deere MC, sn 15436, 1952. With Yakima Works dozer model AN, sn 3077. Engine completely overhauled. Steering clutches overhauled. Undercarriage 75%. Repainted, $7000; KD Cowan nnn-nnn-nnnn (Grandview WA)

John Deere MT, 1950, sn 22550 with 2-bottom plow. Side mount mower may be available. One new rear tire, other tires are fine. Tractor runs fine, needs TLC. Hyd works, $1250; Tom Butterfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Joseph OR)

John Deere R, sn 21372, 1954. Restored. Starting engine completely overhauled. Four new tires. Sheet metal very straight, repainted, $7500; KD Cowan nnn-nnn-nnnn (Grandview WA)

John Deere tractors: JD AOS, 36th one made, engine stuck, no batwings or nosecone. Best offer or trade. John Deere B, 1947, $500. John Deere BNH, 1947, $1750. John Deere BW, 1946, ant eater front, $1250. John Deere B, 1949, $1200. John Deere R, 1949, $2500. John Deere AO, 1936, $2750. John Deere HN, 1942, $2500. John Deere B, 1943 on steel $2750. JD M with Henderson loader, $1200; Chris nnn-nnn-nnnn (Camano Island WA)

Kubota L245, L295 parts POR, used loader off L295, $1,500, also Kubota B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Magneto for Cat D2 and D4 staring motor $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 35 diesel. 3 pt. Overriding clutch, very good sheet metal, good front wheels and tires. Good rear tires on spin-out wheels. Runs good, $2975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Ferguson 35, 1964, has box scraper, cultivator, running, new tires on front, $1500; Albert Horley nnn-nnn-nnnn (Hollister CA)

Massey Ferguson 35, gas, alternator, good tires, has been used all summer, $2800; Karl nnn-nnn-nnnn (Rainier OR)

Massey Ferguson 35, gas, electronic ignition, alternator, $2300 or offer or trades; Klein Tractor nnn-nnn-nnnn (Rainier OR)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering 10-20 1928 Runs good $1,850.00 also have extra parts for sale; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA) [link to photo]

McCormick Deering 15-30, 1924, from Godfrey Humman Collection. Should run easily, very little rust, complete, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick Deering 22-36, 1934, from Godfrey Humman Collection. Should run easily, very little rust, complete, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-12, 1937. In storage since painted, $3500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1000. McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $650. McCormick Deering O-4, parting out: batwings/engine side panels, orchard belt pulley, hood, shutters, all-fuel manifold, exhaust elbow plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering OS 6, sn OBKS 15885. Tires are shot. Complete except for the belt pulley. Pulley gears, control and housing is there, $400; Wilbur Reil nnn-nnn-nnnn (Davis CA)

McCormick Deering O-S4, 1948. In storage since painted, $3500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering T-40 crawler, engine is free, needs intake manifold, sheet metal good, under carriage is real good, tractor is complete, $1000; Larry Manley nnn-nnn-nnnn (Dorris CA)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Minneapolis 17-30 Type B Cross Motor tractor, 1926/27, sn 5712. Ran 1 year ago. New head gasket and valves were lapped at that time. Complete except for seat. In good shape, $10,500; Bill Standish nnn-nnn-nnnn (Rathdrum ID)

Oliver 60 row crop narrow front. Engine turns over, not running, has PTO, $400; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold $7200 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver Hart-Parr 28-44, 1937, predecessor to the Oliver 90, with complete Scout backhoe attachment made by the Shawnee Manufacturing Company of Topeka, KS and hydraulic front end loader. It has approximately 1500 lbs. of iron wheel weights that go too. It was running when parked several years ago, but needs manifold work. $2200 or best offer; Ryan nnn-nnn-nnnn or xxxx@xxxx.xxx (Ellensburg WA)

Oliver HG with dozer blade, good undercarriage, straight tinwork. Operates as it should, starts and runs good, good oil pressure. It smokes and uses oil, probably due for a set of rings; will still push a blade full of dirt. Steers good, has belt pulley and p.t.o. I can e-mail pictures, $2500; Bob Pierce nnn-nnn-nnnn (Omak WA)

Oliver HG-68 crawler, 1951. Nicely refurbished. Has a hydraulic operated 3-pt hitch, rear PTO drive shaft, a side pulley drive shaft, but no pulley. Also has street rubber pads on tracks for street use, $9500; Mac nnn-nnn-nnnn (Clarkston WA)

Oliver OC3 crawlers parts, Sell one part or all as I am cleaning out; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver Super 55 gas with loader not running, complete with 3 pt. hitch decent sheet metal, probably won't take much to get it running, $1450 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Parts: Pile of parts for old two cylinder John Deere and Oliver OC3 crawlers. Lots of misc parts, email or call for more info; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Repair parts for Borg Warner T96-1C three speed top load transmission: case, input shaft, top shifter assembly, misc small parts, $55; Hardy nnn-nnn-nnnn (Sutter CA)

Rims: Two used 9"x36" rims for a Farmall C, SC or 200. Pictures available on request. Good useable condition, $150 each or $250 for the pair; Dennis Kytola nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgefield WA)

Tire: Firestone Field and Road 15.5-38, 8ply 80% tread, $350; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Tires: 500x12 tires off old walk behind rototiller or tractor with the tractor lug cross design, might be original and very old but look very, very good, comes with 5 lug wheels all painted up, $100 for the pair, pics upon request; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Tractor tire: 14.9x28, $50; Dave Gallant nnn-nnn-nnnn (Boring OR)

Tractors: Leader, 1940's, runs, good shape. Graham Bradley 1938, rebuilt engine, runs, nice tractor. Gibson EF, 1940's, runs, nice. Minneapolis 17-30 B, 1920's. Allis Chalmers, 20-35, 1929, runs. John Deere BO Lindeman, 1940's, wide gauge, runs. Ford Jubilee, 1953, very nice, runs. Ford 850, 1956, newer rebuilt engine, 12 volt, runs very nice; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Weights: 3 sets of Cockshutt weights, approx 300 lbs per set; Al Barkl nnn-nnn-nnnn (Elko NV)

Wheel weights, pair of Wilkerson Nutwell, Fresno CA. AC 22 cast into the weights. Allis Chalmers 22?? $150 pair. Also wheel weights, pair of Wilkerson Nutwell, Fresno, CA, No FR 3 fits Ford 8N, possibly others, $100 pair; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Wheel weights: 3 sets of Cockshutt 30 rear weights, $50 per set; Al nnn-nnn-nnnn (Elko NV)

Weights: John Deere eight 75# slab, $50 apiece. Eight 100# suitcase, $75 apiece; Glen nnn-nnn-nnnn (Moses Lake WA) [link to photo]