May 2015 - Engines & Parts For Sale

All Classified Ads

Associated 8 hp hit & miss. 1912 Webster mag. Runs good. Has been shown at several shows. This engine makes a very nice showy display. On a 4 iron wheel trailer, $5000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Bean: 2-1/2 hp Bean Spray Pump Co. vertical (looks like a NOVO engine) mostly compete, not stuck, $425; Ray Bathrick nnn-nnn-nnnn (North Bend OR)

Brantford Cub 2 hp, sn 78468, no tag. Webster mag and ignitor. Canadian engine built by Goold, Shapley and Muir. Has been painted with primer. Rocker arm bracket has been repaired, $1000. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Bullseye 6 hp sideshaft, type GE, sn 6647, 350 rpm, mag, oiler, with wooden battery box, with Underwriters Labs inspection tag, $7425. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Carburetor and fuel tank for 1 HP International Tom Thumb, carb fuel adjuster is free. Number G6971 is cast into side and IH on other side. Carburetor looks to be in good condition, no C B W. Fuel tank looks to be useable has some rust inside no fuel cap or neck, tank measures 10-3/4 X 3-1/4, $140; Daniel M. Thompson nnn-nnn-nnnn or xxxx@xxxx.xxx (Winnemucca NV)

Delco light plant complete free, $175; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

Engines: 30 Hit & miss engines, some on carts, some have been shown, including 3 hp John Deere on shop-built tractor, headless Witte, Fairbanks-Morse, Ottawa, Jaeger, Hercules, Economy, International, Stover, Sattley, shop sale on April 11-12 8AM til dark. No early sales; David Sanders nnn-nnn-nnnn Sale at: 71570 Levi Lane (Elgin OR)

Fairbanks 1-1/2 hp, hopper condenser cooler. Needs work, stuck, $250 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks flywheel mounted clutch (21" diameter 6 bolt pattern), $100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks Morse 3 hp Z engine open crank on very nice homemade cart. Hot R mag has been in storage was running should be easy one to get running. Iíll try if I find time, $500 obo. I can email pics. May trade for Ford TT truck parts; Robert Middleton nnn-nnn-nnnn (Reno NV)

Fairbanks Morse 3 hp Z, guessing 1918 vintage, on cart. Running open crank hot R mag. Cart is nice with steering steel spoke wheels and muffler. Can email pics and vid of it running, $575 obo; Robert Middleton nnn-nnn-nnnn (Reno NV)

Fairbanks Morse 6 hp Z, complete, $500; Ronnie Crevolin nnn-nnn-nnnn or xxxx@xxxx.xxx (Kerman CA)

Fairbanks Morse 6 hp Z. Needs fuel tank, $500; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)

Fairmont railway engine, good compression, $375; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

IHC McCormick Deering 1-1/2 to 2-1/2 hp LB engine. It was built in 1948 with sn LBA 132177. It is complete, turns over, has belt pulley and new cast iron hopper cover. It was running, but has a cracked spark plug (including a new spark plug, along with a manual, so it should be easy to get it running again). Engine weighs around 200 lb, so local pickup is preferred, but we might be able to deliver depending on location, $350 obo; Dan nnn-nnn-nnnn for details or photos (Tigard OR)

Ingeco AK 2-1/2 hp, sn 5445, runs great. Restored, on cart, $1320. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

International Harvester LA 1-1/2 - 2-1/2 hp hit & miss engine. Runs great! $500; Mel Pendarvis nnn-nnn-nnnn (Bend OR)

McCormick Deering M, 1.5 hp., good condition, $600; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

Monitor 5 hp on original, large iron cart, good compression, sn 9986, $3000. Email for pictures and details: Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Novo single cylinder, 6 hp, rare throttle governed kerosene engine; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Sandwich 4 hp. Nice tulip top Sandwich engine with Sandwich pulley(?) Hot Webster mag. Comes with original metal rails, $2500. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Stover CT3, runs good on skids, $600; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

Thierry DUX: This is a French hit & miss engine in running condition. Ran the engine the middle of March 2015 after sitting for several years. Can provide video when weather improves. Governor latches exhaust valve open and it coasts a fair number of times between hits. The DUX models are quite rare only a few are known to exist. Unknown HP but is probably a 4hp or 5hp engine. No serial number tag but many of the parts have the number 3 stamped on them. This engine has the cast sub base that another DUX engine I've seen photo of did not. The flywheels are 25" diameter. Based on casting date this is a 1923 engine. $5000; George Best nnn-nnn-nnnn (Beaverton OR)

Vintage Hercules IXA5 four cylinder gas engine with old Onan 6000 Watt generator, all self-contained on a skid with wheels. This machine sat in a dry garage for 25 years and ran in about ten minutes after tinkering with it, sounds very good and smooth. Very good looking engine and

generator for its age, $750. Pics available; Joe Giordanonnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)