May 2015 - Vehicles

All Classified Ads

1928 Chevrolet coupe, 85% restored including all new wood in body, $5500 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

1929 International 6-speed Special Truck (Cab & Chassis). Runs and drives, original condition with new front tires and wood spoke wheels. Needs a bed and some work on the cab. Would make a great show or parade truck if restored. Owned since mid-1990ís and has always been stored inside, $8500 obo; Dan nnn-nnn-nnnn for details or photos (Tigard OR)

1931 air cooled Franklin, stored since 1960, $29500 obo; nnn-nnn-nnnn (WA)

1942 Hudson 1/2 ton pickup. 116" wheelbase. ID C-20-23571. Been stored inside the last 40 years or longer. Rusted spots in floorboards. All other parts only surface rust that I've found. Missing grill, radiator & glass. Very rare, only one of 67 commercial vehicles built in the 1942 production year which ended Feb 5, 1942, $6500. A donor vehicle with a 116" wheelbase, a grill, radiator & much more is available for $750; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)

1946 CJ2 Willys Jeep, rare fabulous condition, must see to appreciate, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

1947 IHC K7 truck, original condition, it has a hydraulic hoist and dump bed with side racks. It was running a few years ago and was stored inside most of its life. It was owned by my grandpa for many years, I purchased it from my grandparents estate auction with the intent to restore it but just don't think I will have the time. It has very little rust; Dehl nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

1948 Kenworth title; William Transue nnn-nnn-nnnn (Cromberg CA)

1955-65 (?) White 4000, 175 Cummins engine, 5 speed main, no aux right worm drive worm drive. Body & frame good, radiator appears good, no glass, no title, will part; William Transue nnn-nnn-nnnn (Cromberg CA)

1957 Ford F-600, 19' flatbed, 312 v-8 2spd rear, $800; Adrian Kavesh nnn-nnn-nnnn (Sherwood OR)

1957 IH Golden Jubilee A110 Pickup. One of the rare Gold and White Anniversary Trucks, built by the International Harvester Company May 31,1957. It runs and drives (not street legal-needs gas tank to be cleaned out and recoated), but we have rebuilt the brakes and wheel cylinders. Has a BD-220 6-cylinder engine with T-1 manual 3-speed transmission. Also comes with chrome bumpers, chrome grille insert and gas cap assembly. Has hydraulic brakes, dual electric horns, dual chrome cowl mirror, dual electric wipers, tinted glass, heater & defroster. Includes Line Setting Ticket and Original Operatorís Manual. Also included with the truck are numerous parts needed to complete restoration including stainless steel trim strips, headlight besels, new rear tail lights and most of the emblems. A great project for someone who wants a rare truck for their collection. Fully restored these can be worth $30-$50,000 (one recently sold at a Mecum Auction for $52,000); Dan nnn-nnn-nnnn for details or photos (Tigard OR)

1960 Cushman Super eagle. Nice runner with many extras, $2500. Please leave message if no answer; David Pembroke nnn-nnn-nnnn (Silverton OR)

1962 Kenworth parts, including radiator, $250; 12,000 lb front axle with springs, $150; cab (rough), $100; manual steering, good, $100; William Transue nnn-nnn-nnnn (Cromberg CA)

1962 Studebaker Gran Tourismo Hard Top. See photos at www.greenpasturesenterprises.com/carls_cars.html; Maureen Craig nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland WA)

1963 F800 dump truck 5 yard 292 engine 6 speed Ford-O-Matic transmission. Good 5 yard box, good cab, hood & fenders. Runs and works great, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

1968 Chevrolet Custom Sport Truck, 1/2 ton. New front tires, good rear. Less than 20,000 miles on re-built 350 4 bolt main with Hi-Torgue components, TH 400 transmission. Needs rocker panels. Drive it home for $1750; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)

1986 Ford F 350 4 door dually big bed fifth wheel hitch, 460 engine, automatic transmission, dual gas tanks, good upholstery except drivers bucket seat. Engine is locked up. Will sell all or part; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Allison trany 6 speed. Two places for pto. Out of a Ford 1968 F700 big block. Part #C8HA7003? model MT30; Jim nnn-nnn-nnnn or nnn-nnn-nnnn (Clark Fork ID)

Chevron 19ft aluminum rollback machinery truck bed with winch off Ford 350 complete with pump, mounts and tool boxes, $5000 or offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

CJ5 original Koenig Jeep top with doors, rough but fully restorable, $200 OBO. Doors are complete with window regulator hardware; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Durant Car engine #W5-498539 with clutch and water pump. Engine made by Continental for Durant. 4-cylinder. Not stuck, $250 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Engines for vehicles: 1966 Chevrolet 283 engine only. One 1976 Dodge 318 engine only. One 1953 Chevrolet 235 engine only. One Corvair engine, not running; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford Model A engines. I have 2, they both turn over. Sell or trade, what have you got? Mike nnn-nnn-nnnn strokermikewatkins@g mail.com (Kingston WA)

Ford TT truck cab 1925 to 27 vintage. Top was cut off years ago. Nice solid subrail and cowl, $25. Need it gone can email pics; Robert Middleton nnn-nnn-nnnn (Sparks NV)

Mid-1950's Kenworth, Eaton dual drive, 6 speed Fuller main, 3 speed aux, Cummins 262 engine, ran when parked, $1500; William Transue nnn-nnn-nnnn (Cromberg CA)

New parts for older trucks: Ford AA BB pressure plate, Dodge Monarch 1930 pressure plate, 1936-40 Indiana 11" disk, 1935-42 White disk. Master cylinders: Chev 1955-58 2nd series, Chev 1/2 T 1947-50, Ford 1939-62 3/4-1-1/2 T, Chev 38-46 3/4-1 T. Many tie rod ends, King bolt kits, miscellaneous suspension parts. Will be at the Spring Monroe Swap Meet and also Yakima in June; Gary nnn-nnn-nnnn (Silverlake WA)

Set of 4 Kelsey-Hayes 19'' wood spoke wheels with split rims. Spoke and rims in beautiful shape but unsure what they are off of; $425 obo, can email pics; Robert Middleton nnn-nnn-nnnn (Sparks NV)

Truck parts: 10 speed good condition, $200. SQHD drop-in and axles, 529 ratio front & rear, $400 for set; William Transue nnn-nnn-nnnn (Cromberg CA)

Turbo cores, have 3, $50 each. Three manifolds, 2 NT series, 1 Cummins other; William Transue nnn-nnn-nnnn (Cromberg CA)

Vehicles: 1985 Ford Bronco II, 67k miles; 1931 Kenworth with good title; Kenworth grills and fenders; shop sale on April 11-12 8AM til dark, no early sales; David Sanders nnn-nnn-nnnn Sale at: 71570 Levi Lane (Elgin OR)

Wanted: 1917 International truck needs throttle & magneto controls on steering column; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Wanted: 1982 Toyota PU 4x22R needs crossover arm from one windshield wiper to the other under the cowling. Also need right front fender, hood & headlight plastic; Wayne Hay nnn-nnn-nnnn (Molalla OR)

Wanted: Engine or engine parts for early Kelly or Kelly Springfield truck, 3-3/4" bore, 5-1/4" stroke. Also need wheels for same truck; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Wanted: old Kenworth hood emblems from the 50s and 60s era. The emblem that was in the middle of the hood with KW on it; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Wanted: older muscle car from 60s or 70s era, Nova, Chevelle, Cuda, Roadrunner, Mustang etc. Would even consider basket case; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Will trade 2004 Suzuki Savage LS650 for engine of equal value. I am a collector, and not interested in selling engine, so the engine would have to be something I'd be interested in. Had back surgery few years ago, can't ride it any longer. Less than 2000 miles; Brian Edwards nnn-nnn-nnnn (Burien WA)