July 2015 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers C parts: grill, hood and gas tank, $50 each piece; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Allis Chalmers CA wide front, parked for 3 yrs, straight metal, spinout wheels; Fred nnn-nnn-nnnn evenings (South Prairie WA)

Allis Chalmers D 12 with sickle mower, all original; Jerry Fischer nnn-nnn-nnnn (Gaston OR)

Allis Chalmers D-14, runs, new 3-pt, restore or use for parts, $1000 obo; Jim nnn-nnn-nnnn (Ducor CA)

Allis Chalmers G with cultivators; Jerry Fischer nnn-nnn-nnnn (Gaston OR)

Allis Chalmers HD 3 engine parts for sale: crank shaft, pistons, valves, injector pump, starter, generator, injectors, hydraulic cylinders, hoses, repair manual; Phil nnn-nnn-nnnn (Redmond OR)

Allis Chalmers K-35, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Allis Chalmers WM straight blade, 2 radiators, water pump, mag. Motor runs, 40# oil pressure, other parts; Ernest nnn-nnn-nnnn or nnn-nnn-nnnn (Klamath Falls OR)

Allis Chalmers WM, 1934. Restored, sand blasted and painted, hand crank, valves ground and cylinders honed, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers WM, 1937. Restored, sand blasted and painted, electric start, cylinders honed and good tracks, $2900 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Case 300 round nose, very nice unrestored tractor complete with Eagle hitch, $975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case 310 crawler dozer, very nice, gas engine with 4 roller undercarriage. Runs and drives very nice and smooth. Manual angle blade, good undercarriage, $4500; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Case 400 round nose diesel, row crop, so-so tin. Used last season, strong runner, $1000; Art Keyes after 6PM nnn-nnn-nnnn (Toledo WA)

Case L , 1937, on steel wheels, brass carb, old faded paint, decent sheet metal, fenders are dented and dinged some, runs and drives great, hand crank only, easy to operate hand clutch, $3000; Larry Daniels nnn-nnn-nnnn (Phelan CA)

Case D (PULLER tractor) with new 18.4 tires; Jerry Fischer nnn-nnn-nnnn (Gaston OR)

Case terra track loader complete, reduced to $800; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case V rear wheel weights, $200 for pair; Buck nnn-nnn-nnnn (Greenville IL)

Case VAI, very nice sheet metal, rebuilt head, etc, lost interest; Fred nnn-nnn-nnnn evenings (South Prairie WA)

Case VAO 5557665, okay tin, wide front, eagle hitch, belt pulley, good rear tires, ran good last use, eagle hitch plow, $750; Art Keyes after 6PM nnn-nnn-nnnn (Toledo WA)

Case wide tread tractor, 1936, on full steel, includes set of rubber tires & wheels plus a cultivator, $5250 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10 castings & some parts. Caterpillar 20 radiator, $200; Buck nnn-nnn-nnnn (Greenville IL)

Caterpillar 15 with belt pto; Don nnn-nnn-nnnn (Napa CA)

Caterpillar 22 parts: have engine (stuck), radiator, finals, transmission and casting, fuel tank but not much tin. Call for prices; Jim Olson nnn-nnn-nnnn (Dufur OR)

Caterpillar 30 undercarriage parts: 2 tracks 30 links 7" pitch 13" pads, 2 track frames with Holt type dozer brackets--shop built--4 top carrier rollers in good condition, 2 front idlers in good condition, 8 bottom rollers, most in poor condition, 1 sprocket with bull gear and housing, $1000 obo; Erin Howell nnn-nnn-nnnn (Stevenson WA)

Caterpillar 933 track loader, 1950's, runs good, undercarriage is in need of repair, would make a good restoration project, $2500 obo; Dustin Pick nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond OR)

Caterpillar 955, series, H, 1966. Series H. 95% under carriage. 4-in-1 bucket. Rebuilt engine with 933 recorded hours. The steering clutches are very good. No hydraulic leaks. This is a very powerful & good machine and starts every time! $9750; Bill Standish nnn-nnn-nnnn or xxxx@xxxx.xxx (Rathdrum ID)

Caterpillar toolboxes (not embossed), 21 and 29 long, $135 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Cletrac AD, 1937. Restored, sand blasted and painted, good tracks, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1936. Restored, sand blasted and painted, hydraulic dozer blade (Issacsan) good tracks, $2900 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac HG31 rare narrow gauge crawler, not running, sat for many years, has nice original tag. Make offer; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Cletrac W, 1919, needs restored, $5000; Buck nnn-nnn-nnnn (Greenville IL)

Collection of original Caterpillar Manuals for early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25.00 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)

Eisemann Magneto, Model G-4, rebuilt, came off a 1927 Cat 2-ton but used on many 4 cylinder engines, $200; Alan Langmuir nnn-nnn-nnnn (West Sacramento CA)

Ensign carbs for Cat 20, 30 all rebuilt, $450. D2-D6 battery box covers with thumb screws, $80. D4 engine side panels, $195 per pair new. D2-D4 magneto $250. D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall MD, 1951, wide front, completely rebuilt, new front tires, good rears, new paint, decals. Many new parts, show ready, $4000 obo; Robert Nelson nnn-nnn-nnnn or xxxx@xxxx.xxx (Junction City OR)

Farmall A "two-fer": One, sn AA59005, ran when parked but needs carb work now. The other, sn AA100806, has front end missing. Both $750; Art Keyes after 6PM nnn-nnn-nnnn (Toledo WA)

Farmall A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall A, comes with sickle bar mower, plow, other attachments. Very nice condition, price reduced to $875 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall A, restore or parts, $500 obo; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall Cub, 1948, good running tractor. All 4 wheel weights, 2 new tires. Has front end blade. Has 17" plow, also comes with small disk, has no rust, always garaged, straight chassis, $1650 obo; Jerry nnn-nnn-nnnn (Vancouver WA) [see photo if he responds with payment coming]

Farmall Cub, 1950, very unique with custom hydraulic belly blade & ripper bar. Very straight. Good for landscaping or corral, $2000 obo; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall F12, 1936, single front wheel, rear cut downs, tires are cracked but have good tubes and hold air, rebuilt carburetor and fuel pump, runs great, $1500; Larry Daniels nnn-nnn-nnnn (Phelan CA)

Farmall F12, 1937, mostly complete parts tractor, F and H round spokes, single front , no tires, engine stuck but block is not cracked, decent radiator, no air cleaner, $650; Larry Daniels nnn-nnn-nnnn (Phelan CA)

Farmall H belt pulley gear box, excellent condition, $85. Front radiator shutters & controls for H Farmall. Repainted, excellent, $80; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall H rear steel, very nice, $500; Larry nnn-nnn-nnnn (Phelan CA)

Farmall MDV, 1946. Rare dual fuel high crop. Engine stuck, good tag, $7500 obo; Ed Ristow nnn-nnn-nnnn or nnn-nnn-nnnn (Camas WA)

Farmall Regular, 1927?, engine turns, has steel rear spoke wheels available or 32 spoke rear wheels for 10 tires, $500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farmall Super H, 1954, NOS piston & sleeve set, nice paint new, vinyl decals, belt pulley, IH Windbreaker, IH umbrella, 13.6x38 rear tires, great running tractor, $4500; Al nnn-nnn-nnnn (Elko NV)

Ford 2000 OFFSET 1 row tractor gas 4 spd. with Howard gear runs and drives, good sheet metal, original paint, 2000 hrs. no welds on OFFSET parts; $4250 Mark Parker nnn-nnn-nnnn (Lebanon OR)

Ford 601 parting out-complete 134 engine, SOS trans, grill, hood, lights, radiator, rear end; Fred nnn-nnn-nnnn evenings (South Prairie WA)

Ford 8N, 1948-49 with good metal. Brand new 11.2x28 rear tires. Bad motor but has 8 implements with it, $1200 or trade; Wayne Hay nnn-nnn-nnnn (Molalla OR)

Ford 9N aluminum dash, aluminum side covers, early production, not running, great rear tires/rims; Fred nnn-nnn-nnnn evenings (South Prairie WA)

Ford 9N tractor, good shape, very good running, 12 volt system, $3500 obo; Joe Brick nnn-nnn-nnnn after 6PM (Klamath Falls OR)

Ford 9N, good condition but smokes, rear tires like new, good tin, $925; Dennis nnn-nnn-nnnn (Goldendale WA)

Ford NAA, 1954, with Sherman Step Up. Strong engine, excellent tires, very good tin but the front side lower panels for the hood needs some help. This tractor would be an excellent for those drives when you want some speed, $3000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Fordson small center toolbox (not embossed) about 12 long, $50 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fordson tractor, 1926-27, made in England. Has run in the past, just needs some attention to make it run. Can send pictures, $1500; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fordson tractor: magneto mounting assembly conversion, governor built-in, $200 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Harris Power Horse complete with hyd. blade and gearmatic winch. Call for price; Don Chappell nnn-nnn-nnnn (St Helens OR)

HG Oliver Cletrac, no blade, runs good; Jerry Fischer nnn-nnn-nnnn (Gaston OR)

Hood: Brand new reproduction hood for John Deere AOS, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)

International B275 STD tractors, have two, 1960 & 1961. Wide front ends, 32.8 PTO hp, 3 point hitches. Both run good and are restorable, $1950 each obo; Jim nnn-nnn-nnnn or Phil nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

International T6 crawler, 1954. Rebuilt carburetor, major tune up, new Hagn seat, very very nice under carriage, runs, steers great. New 12 volt conversion, $2500; Larry Daniels nnn-nnn-nnnn (Phelan CA)

John Deere 20/20 diesel, 1965, total restored, like new paint & tires, with JD 145 loader, $11500; Larry Hawley nnn-nnn-nnnn (Cascade ID)

John Deere 40C Dozer. New tracks. May part out or sell complete, $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420 U, built November 9, 1956. 5-speed transmission, gear-type direction reverser and transmission for industrial tractor. Very good/excellent condition, recent restoration, $5500 obo over; Phil nnn-nnn-nnnn or cell nnn-nnn-nnnn (Enumclaw WA)

John Deere 430T, 1959, all restored. Runs excellent; Jerry Fischer nnn-nnn-nnnn (Gaston OR)

John Deere 435 diesel, 1960, good shape. Needs transmission work. Email for pics; Thomas Weatherford nnn-nnn-nnnn or xxxx@xxxx.xxx (Big Island VA)

John Deere 50 rear wheels, have 2 in good condition. Poor tires, size 12-4x42. $475 for both; Frank Velarde nnn-nnn-nnnn (Northridge CA)

John Deere 50, tricycle, hydraulic loader, 3pt, straight tin on older restoration, can come with vintage JD mower, $2500; nnn-nnn-nnnn (Rainier OR)

John Deere 60 Orchard, only about 100 built. Runs, good tires, $4000 obo. Pictures available on request; Sally Vance Gillman nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)

John Deere 60 Row Crop pulling tractor, single front wheel, runs, $1800 obo. Pictures available on request; Sally Vance Gillman nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)

John Deere 60 Row Crop with tricycle front wheel, runs, has 3 pt hitch MPTO, $1000 obo. Pictures available on request; Sally Vance Gillman nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)

John Deere 60, runs good, stored inside, needs new rear tire, $2800; Rick nnn-nnn-nnnn (Loomis CA)

John Deere 60, sn 6006345. Ran when I parked it many years ago, has single tire front, $300; James Williams nnn-nnn-nnnn or xxxx@xxxx.xxx (MacDoel CA)

John Deere 60. Great restoration project, 42 tires, $2000 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 60N, 1956, high seat propane row crop tractor. New breaker less ignition, new hot coil, new front tire, rear tires 90%, factory 801 hitch, $5500; Neil Carleton nnn-nnn-nnnn (Clatskanie OR)

John Deere 620, 1957, wide front, power steering, 15.5x38 rear tires, flat top fenders, float ride seat, runs and drives good, everything works, very little rust, $2750; Jeff VanBeek nnn-nnn-nnnn or xxxx@xxxx.xxx (Sumas WA)

John Deere 70 diesel row crop wide front. Fresh main motor, .090 over with JD 720 center main oiler system, taper lock fly wheel, new radiator core, rebuilt power steering, strong goat starter motor, factory 801 hitch, rear tires 80%, front tires 90%. Over $8000 invested, $6000; Neil Carleton nnn-nnn-nnnn (Clatskanie OR)

John Deere A (early) parts for sale; LeRoy Souza nnn-nnn-nnnn (Hanford CA)

John Deere A US, 1937. It has been pulling 4 years and is a consistent winner. This tractor has been completely overhauled and enhanced with .125 oversized pistons MW. It pulls with 14-9--38 151 Firestone top cuts and 4-12 on the front. The engine has Murphy roller rockers and 51, G carburetor, hot coil magneto and develops 55 hp on dyno. Has Mark V wheelie bars and weight brackets. Will let some weights go with it. I am quitting Tractor Pulling for health reasons. It's been 16 years of fun A great buy at $6500; Glen nnn-nnn-nnnn (Moses Lake WA)

John Deere A, 1938, unstyled, runs good, good rubber, new paint, rebuilt engine, $13000; Larry Hawley nnn-nnn-nnnn (Cascade ID)

John Deere A, 1949, styled, runs good, good rubber, fair paint, $1295; Larry Hawley nnn-nnn-nnnn (Cascade ID)

John Deere B two-fer special: B-1, sn B9xxx0, very good sheet metal. Needs 1 tire and others need tubes. PTO with remote hydraulics, $1500. B-2, sn B79073 tricycle, good sheet metal, needs tires, $1250. Take both tractors for $1750; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere B, 1935, unstyled, runs good, new rubber, new paint, rebuilt engine, $18950; Larry Hawley nnn-nnn-nnnn (Cascade ID)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, rear spokes very good unstyled tractor ready for paint. Price reduced to $3500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1947. Nice looking tractor with # 5 mower mounted, tires fair, slow leaker, $600. Other JD's for sale and bunches of misc. implements, rims, and such; James Williams nnn-nnn-nnnn or xxxx@xxxx.xxx (MacDoel CA)

John Deere B, 1949, complete but disassembled. Block and head have been done. Sheet metal has been painted. Have new oversized pistons, valves, wiring harness, sheet metal fasteners everything you need. Rollomatic front end. New rear tires, not matching. Good front tires. Will throw in #5 mower and a front end loader, $2500 obo; James Williams nnn-nnn-nnnn or xxxx@xxxx.xxx (MacDoel CA)

John Deere BR, 1936, complete restoration, hand start, steel wheels, excellent starting and running in top condition, $4500; John Shierman nnn-nnn-nnnn (Battle Ground WA)

John Deere D, 1935, complete, not stuck. Comes with brand new fenders & hood, very nice old '35 D, price reduced to $2750; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, sn 124611. Runs good, new tires on front spokes. starts easy. Hand crank, looks good but needs paint; Wes nnn-nnn-nnnn or if no answer, call Kent nnn-nnn-nnnn (ID)

John Deere G US, 1941. It has been pulling for 3 years and has had many 1st and 2nd place wins. Pulls 5000-6500 3 and 4 miles per hour. Tractor has been completely rebuilt from front to back. Engine enhancements include Murphy head and manifold, Murphy roller rockers and Shellum DLTX51 carburetor, new valve springs and oversized valves. It pulls on 18-4-38 Firestone 151 top cuts. It is rated at 90 plus HP with .125 oversized MW pistons 12.4- 1 compression with gear drive starter. Great puller. Has Mark V wheelie bars and weight brackets. Buy it for $8500. Will let some weights go with it. I am quitting Tractor Pulling for health reasons. It's been 16 years of fun; Glen nnn-nnn-nnnn (Moses Lake WA)

John Deere GP (NOS) clutch pulley, $250; Buck nnn-nnn-nnnn (Greenville IL)

John Deere GP, 1930, on rubber, cut downs on the rear, original round spokes on the front, correct carburetor, old repaint is faded, tractor starts easily and runs well, $3500; Larry Daniels nnn-nnn-nnnn (Phelan CA)

John Deere GPO parts; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere H, 1941, flywheel start, complete engine overhaul, carb & mag rebuilt, new front & rear axle bearings & seals. New brakes, all tires like new, new paint, new clutch, tractor with almost new big tex trailer, 14ft with ramps, chains & binders. All of the above for a low $5500; Vaughn Parker nnn-nnn-nnnn (Bellevue WA)

John Deere L (NOS) piston rings, $75 pair. Also JD L used engine parts; Buck nnn-nnn-nnnn (Greenville IL)

John Deere L, 1939? Very straight tractor in running condition. Good tires and wheels. Comes with cultivators, $2975 obo, some trade? Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere LA tractors, have 2, parts or restore, call for prices; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere LA, 1946, restored. Has ID tag, runs good, good tires with JD single bottom plow, $4000; Rob Vezzoni nnn-nnn-nnnn (Cle Elum WA)

John Deere MC and 40C undercarriage parts, good condition: 420 MC, 40 short blocks, rollers for MC, 40, 420, 430, 440, 1010 and early 2010; Ralph Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Wolf Creek OR)

Lots of misc parts for John Deere two cylinder crawlers, Oliver OC3s. Cleaning out. Sell all or individual; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Massey 65, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Massey Harris 55 diesel, engine free, does not run. The fuel injector pump will not make pressure. Has two bad tires, needs paint. The sheet metal is straight. Would make a nice pulling tractor. Not too many of these built. $1450 or make offer; Paul Valentine nnn-nnn-nnnn (Montesano WA)

Massey Ferguson 35, gas, daily drive, good rear rubber, electronic ignition, alternator, 5 ft woods finish cut mower on the back, might separate, $2750; Karl Klein nnn-nnn-nnnn (Rainier OR)

McCormick Deering ODS6, 1948, new engine, partly restored, needs paint, $5000; Thomas Covington nnn-nnn-nnnn (Loma Rica CA)

McCormick Deering OS6, 1948, sn OBKS25387WI, complete, good restoration project. Engine ran when parked, not stuck. Needs tires, $1000 obo; Matthew Scott nnn-nnn-nnnn (Denair CA)

McCormick Deering T-20, sn 9844. Engine loose, tracks loose, $250; James Williams nnn-nnn-nnnn or xxxx@xxxx.xxx (MacDoel CA)

Minneapolis 17-30 Type B Cross Motor tractor, sn 5712. Year 1926/27. Runs. Pictures upon request. $6900 obo; Bill Standish nnn-nnn-nnnn or xxxx@xxxx.xxx (Rathdrum ID)

Minneapolis Moline M5 diesel, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Minneapolis Moline UTS special, sn 01214332. Big full fender tractor with good sheet metal. PTO and remote hydraulics, $1500; Warren Harger nnn-nnn-nnnn (Central Point OR)

Oliver 1600, diesel. Good running and well maintained. Equipped with Farmhand loader, $3500; Andy nnn-nnn-nnnn (Camas WA)

Oliver 1650 industrial skip loader, 4x4, hydraulic reverser, big, heavy, runs strong and clean, $4850; Karl Klein nnn-nnn-nnnn (Rainier OR)

Oliver 60 row crop sn 613207. Sheet metal good, tires are shot, engine stuck, $250; James Williams nnn-nnn-nnnn (MacDoel CA)

Oliver 77 row crop, 1949, sn 321315, runs good, new front tires, rear tires 80%, plus live pto, changed to 12 volt, good paint, reduced to $1500 obo; Richard Findlay nnn-nnn-nnnn (Moses Lake WA)

Oliver 80 Row Crop, 1938. Complete restoration in 1998. Have owners manual. Runs. Pictures upon request, $1950; Bill Standish nnn-nnn-nnnn or xxxx@xxxx.xxx (Rathdrum ID)

Oliver 88 Row Crop, single front wheel, runs, $1800 obo. Pictures available on request; Sally Vance Gillman nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)

Oliver Cletrac grille and side panels, original, very nice condition, $450, can ship; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Oliver HG crawler, restored, nice correct paint, decals. Good runner, good tracks, $2500 obo; Al Swanberg nnn-nnn-nnnn (Mt Vernon WA)

Oliver OC3 crawler dozer with PTO unit, very nice, very good undercarriage, runs and drives very good, nice old machine, $3700, can ship ; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Rear wheel weights, have 6. Four have the number D2628 and two have FT8rco, and w182, and L11658 on them, $250 for all six; Bill Cooper nnn-nnn-nnnn (Glenwood WA)

Tire: 14.9x38, $50; Dave Gallant nnn-nnn-nnnn (Boring OR)

Tires: Two 13.6 X 36 Firestone tires. Brand new, never mounted, $350 each or $650 for the pair. Buyer will be responsible for shipping/freight; Jim Farley nnn-nnn-nnnn (Atwater CA)

Tractor parts: one live hydraulic pump Farmall 300, 350, etc. One fast hitch drawbar large points; Al nnn-nnn-nnnn (Elko NV)

Wallis 20/30, 1927, on rubber. This is a mostly complete tractor. It has been sitting quietly for a number of years. I will send a picture from 2002 when I had it running at the EDGTA National show. I have begun to slow down and need to part with some of my treasures, $1000; Dudley Mills nnn-nnn-nnnn or xxxx@xxxx.xxx (Campo CA)

Yanmar diesel tractor-about 17-20 hp Did valve grind, comes with 4 ft brush hog, runs excellent, $2750; Don Chappell nnn-nnn-nnnn (St Helens OR)