August 2015 - Misc. For Sale

All Classified Ads

3-ton bridge crane end trucks, 33 ft max span, capable of being motorized. Never used, new condition, nice, $1000 obo; John nnn-nnn-nnnn (Manning OR)

70 series Servis 8 ft HD blade, 3 way adjustment, rear mount, in good condition, $700; Larry Hawley nnn-nnn-nnnn (Cascade ID)

Backhoe attachment for Skid-Steer loader (Bobcat), 8-way hydraulics action. Made by Case, model 100, $2100. Backhoe attachment for Skid-Steer loader (Bobcat), model 909, 8-way hydraulics action, $4900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Bailer: I have an Ann Arbor Bailer that I want to sell. It turns so that is good news. It is heavy due to the large castings, $600; Dudley Mills nnn-nnn-nnnn or xxxx@xxxx.xxx (Campo CA)

Boom 3 pt for tractor, make offer; John Evers nnn-nnn-nnnn (Dallas OR)

Camper: Sears Ted Williams Camper, "TENT" trailer. It was first sold in 1964. We have owned it since about 1977. The unladen weight is 460 lbs. There is some rust and all three tires hold air but are not roadworthy. The tent part is only good to use as a pattern for a new one. There are several clubs that specialize in vintage campers. Asking price is $650 as is, cash only. Hauling is buyer's responsibility; Fred Alexis nnn-nnn-nnnn (La Grande OR)

Chain saw: I.E.L. 1944 "L" 8 hp 2-man chainsaw. 4 ft bar, raker chain, no rust or corrosion, missing a few small parts, $1000 obo; John nnn-nnn-nnnn (Manning OR)

Chrysler Industrial 6 cylinder flathead engine from a Massey Ferguson combine. $400 or good offer. Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Collection of original Caterpillar Manuals: early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)

Combine: Case 75 pull-type combine, PTO drive, canvas feed, manual or hydraulic lift header 7 ft. wide. Machine in very good condition for its age. Field ready, $2500 obo; Ken Foertsch nnn-nnn-nnnn (Medical Lake WA)

Combine: International Harvester Model 80 pull-type combine, PTO drive, hydraulic platform, set up with 8 ft. straight combine header. Nice machine. Field ready, $3500 obo; Ken Foertsch nnn-nnn-nnnn (Medical Lake WA)

Corn-thrasher wagon: 4 wheel wagon, will make good yard-art. Can send pictures, $250; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Cultivator: B235 two-row cultivator for B or BN Farmall, $450 obo; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Dearborn plow, 2x16’, 3 pt, good condition, $125; John Evers nnn-nnn-nnnn (Dallas OR)

Dentist chair, antique. Good hydraulics, foot rest is missing, needs upholstering, $300; Tom nnn-nnn-nnnn (Helendale CA)

Drag saw, old, decent but no spark box; Fred nnn-nnn-nnnn evenings (South Prairie WA)

Fan: forge fan, Climax by Buffalo Forge Company, NY. Stand on 3 legs, $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farm wagon: 1955 or 1956 John Deere farm wagon. New wheel bearings and seals, all new tires, new 16' bed. Sandblasted, primed & painted. Side racks, great for parades or farm tours, $3000; Phil nnn-nnn-nnnn or cell nnn-nnn-nnnn (Enumclaw WA)

Flatbed trailer, 8x18, black, 6000 lbs. Axles LT 265-75-R16 tires, 8 hole rims, $3600; Larry Hawley nnn-nnn-nnnn (Cascade ID)

Forklifts: have two. One Philift ranch forklift, pneumatic tires, dual wheels, 4000 lb capacity. Excellent condition, $5250. One Clark forklift, pneumatic tires, dual wheels, 15000 lb capacity, excellent condition, $8500; Rich nnn-nnn-nnnn (San Jose CA)

Front cultivator units from 1949 Farmall Cub. Good condition but rusty. $50 picked up in Vancouver, WA; Bob Williams nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

Fuel tank, 500 gallon, no stand, $150; Dave Gallant nnn-nnn-nnnn (Boring OR)

G & B gas cart T-57 and Wayne 276 5 gal gas pump restorable condition. Can send pics, $1200 for both; Mike Stafford nnn-nnn-nnnn or xxxx@xxxx.xxx (Petaluma CA)

Gas pump: Antique 10 gal Boyle Dayton VISIBLE gas pump with brass nozzle ready for restoration; Jerry Fischer nnn-nnn-nnnn (Gaston OR)

Gates: metal gate, 16 foot, co-op with minor damage, $75. Metal gate, 12 foot Cenex with minor damage, $40; John Evers nnn-nnn-nnnn (Dallas OR)

Generator: Kohler generator, old, motor is stuck, three old Dillon chain winches, small cultivator looks like it would fit behind a garden tractor, two old cast iron wheels that have "Universal" cast on them, look like they came off of a garden tractor. Call for more info and pictures; Jerry 541-575 0866 (John Day OR)

Grain drill: like new used Minneapolis Moline grain drill with seed attachment, model P3-6, 10 ft wide, on rubber. Galvanized see boxes doublE disc drops 6" centers on drops. Seed cover chains behind each boot, $1500; Bud nnn-nnn-nnnn (Grants Pass OR)

Have a pile of horse drawn mower parts, some McCormick Deering and some I.H. Also a couple of basket case mowers. $200 takes ALL; James Williams nnn-nnn-nnnn or xxxx@xxxx.xxx (MacDoel CA)

Hires Root Beer cooler, complete. Bottle rack type with 25 cent coin operated machine, $300; Les Wallace nnn-nnn-nnnn or nnn-nnn-nnnn (Oak Grove OR)

Implements: 6 foot, 3 pt hitch, $500; 6 foot rotary mower, 3 pt hitch; 8 foot pull disc, 4 gang, $600; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Iron wheel wagon, heavy duty. Used as a compressor wagon. Has center point steering with an iron tongue. Will make a good hay wagon, engine wagon, etc. Can send pictures, $500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Iron wheels and axles. King pin front steer axle. Heavy duty - will support 20 hp engines plus. Wheel diameter rear approx. 42", front 36". Can send pictures, $500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Jenny Jack, 40-ton. This is an older jack but works fine with no apparent leaks, $69. Photo available by e-mail; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

John Deere No. 25 6' combine, engine powered, decent original, bad engine, no canvas, $325; John Winn nnn-nnn-nnnn (Dallas OR)

Knickerbocker S3 1/2 cement mixer, 1917-27?? Was sold new with 1-1/2 hp economy hit & miss? NO engine! Very restorable condition. Approx 1100-1200 lbs; needs new tires to tow, $400. E-for more photos; Clay Shorten nnn-nnn-nnnn (Newberg OR)

Lathes: 2 metal lathes, a Sheldon 12 inch, motorized, has quick change gears, also another lathe with a 20 ft bed marked: Putnam Machine Co., Fitchberg, Mass. Not much in the way of tooling for either one. Any reasonable offer considered!; Judith Jones nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonoma CA)

LeTourneau dirt scraper, small size, goes behind Cat D4, cable controlled, $1000; Keith Clark nnn-nnn-nnnn (Spokane WA)

LeTourneau steel wheeled pull-type ripper as would go on back of Cat D8, cable lift, $2500; Keith Clark nnn-nnn-nnnn (Spokane WA)

Log arch, good condition, 7 ft steel wheeled, cable controlled, $2500; Keith Clark nnn-nnn-nnnn (Spokane WA)

Lots of misc yard art items, old steel wheels, old grain feed drill, hit and miss flywheels, old crawler sprockets, tractor seats, some cast iron broken ones, old heavy pulleys, etc, $10 and up; Joe nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

McCormick-Deering alfalfa cutter, antique, horse drawn, $500; Tom nnn-nnn-nnnn (Helendale CA)

Misc: 2-bottom plows, old rakes, mower side delivery; CW Wallace nnn-nnn-nnnn (Toledo WA)

Misc: Feed store scale, buzz saw and 2 sharp blades. Luggage cart, and extra hardware for building a second. Maytag washer. Make a reasonable offer on all; Ruth Walker nnn-nnn-nnnn or nnn-nnn-nnnn (Chewelah WA)

Mower: Farmall Cub sickle bar mower, needs pitman arm stick, $75 ; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Mower: John Deere LA sickle bar mower with extra bar, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

Orchard sprayer: Hardie sprayer, 1945 approx year, 400-500 gallon tank, gas engine. 4 photos available, $300; Bob nnn-nnn-nnnn or xxxx@xxxx.xxx (Linden CA)

Outboard motors: Have around 10 motors, make offer; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Paying cash for old advertising signs of any type, cardboard, tin or enamel, advertising anything in any condition; Joe nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Plow: David Bradley 14" or 16" two bottom plow. On rubber with tail wheel. This plow is in fair shape but need restoration. $250 or make offer; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Plows: John Deere 1-bottom with mounting brackets for L / LA, $125. Farmall Cub complete 2-way, $150. Avery V plow $100. John Deere 680 6-16 pull plow Big beam correct for 830s, need some work, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Pond saw bar, 8 ft long, 5/16" thick, 8-1/2" wide center, 4-1/4" wide ends, 8 holes each end, $250 obo; John nnn-nnn-nnnn (Manning OR)

Pressure washer: John Deere pressure washer, Model A40 on original cart, 3 hp electric Leeson motor frame G184T continuous duty, $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Professional hot water power sprayers on wheels. Burns propane, needs some work, $75; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Pull disc - 5x5 International. Good condition. Can send pictures, $250; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Rail: Heavy Ore-car rail, approximately 200 feet +. Can send pictures, $1.00/ft.; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Rear lift attachments for Farmall Super A, $50; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Rock crusher, Golden State: Heavy duty. 8x8 jaw type. Made in San Francisco in late 1800's. Can send pictures, $3000; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Samson Assay Crusher - hand crank model. 3x3 jaw type. Early 1900's. Excellent condition. This model is hard to find. Can send pictures, $2500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Saw: Belt driven cord wood saw. 26-3/4" blade. Flat belt driven. Lay logs on carriage and slice into cord wood, reduced to $50. Email xxxx@xxxx.xxx for more pictures; Carl Olson nnn-nnn-nnnn (Bay Center WA)

Scythe, 70 years old, excellent condition, used very little, $125; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Stamp-Mill parts: stamps and rods from 2-stamp mill. Also some raster-stand pieces and parts. Can send pictures; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Storage Tanks: Heavy duty for fuel etc. 300 gal. $195 and 1300 gal. $845. The larger tank can be separated into 300 and a 1000 gal tanks which are bolted together. Photos available by e-mail; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

Tire chains: set of 16-9-28 H bar, $450; Larry Hawley nnn-nnn-nnnn (Cascade ID)

Tire: 750-17” Radial tube Michelin, Load Range D, 85% tread, $50; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 2x 13.6”-26” on flat spoke rims with 6 hole bolt pattern, $200 each. Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 2x 13.6-28”, 40% tread. $100 each; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 4 LT 265-75-R16 tires & rims, 8 hole, $350; Larry Hawley nnn-nnn-nnnn (Cascade ID)

Tokheim gravity flow gas pump. Model 620B. Mfg 1927-1946. Restored in John Deere colors and decals, $4000 obo; Dick nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)

Tool box: Pro-Tech brand aluminum pickup tool box. 60" wide, 24" deep, 19-1/2" high. Smooth sides, diamond tread top. Sliding tray with several dividers and lights. Don't think you'll find a better quality or nicer looking one. New price was $830, asking $500; Lee nnn-nnn-nnnn (Crawfordsville OR)

Topeka Highway sickle mower, factory, looks like 40 Ford, running gear; CW Wallace nnn-nnn-nnnn (Toledo WA)

Truck Tool Box fits a truck bed 63+ inches wide. It has two locking covers and a sliding tray inside, $75. Photo available by e-mail; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

Utility cart. 48 volt. 3 years old. Pipe rack. Runs good. Good tires. Manufacturer-club car, $3000; Tom nnn-nnn-nnnn (Helendale CA)

Victor 100 oxy acetylene cutting and welding outfit with medium size owner tanks, almost full, on cart, $300; Also another Victor outfit for $85; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Water Rams: Have 8 or 10 water rams, come by and make an offer; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Water/fuel tank, oval shape, 3 compartment unit with vented lids. Approximately 500 gal capacity. Used as fuel tank in later 30's-40's. Mounted on sub-frame to go on truck or wagon. Can send pictures, $500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Welder, Miller 225G, Bobcat-CC/CV-AC/DC-Onan. 16XSL. Engine stored in shed, not used for 13 years, $500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Windmill: 34 ft metal tower complete with 6 ft fan and tail; Jerry Fischer nnn-nnn-nnnn (Gaston OR)