1940’s vintage Continental Industrial Y69 four cylinder gas engine. The engine was used on a self-power hay bailer. The engine turns over, not stuck, $250 obo; Greg nnn-nnn-nnnn (Lakeport CA)
Aermotor 8 cycle, needs new paint and some TLC, $800 obo; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Associated 2 hp hopper cooled engine. Has good compression. No cart. Mag has been rebuilt, $900. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Associated Chore Boy 1-2/4 hp, sn 30566 on cart. New ignitor, complete, $750; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Caterpillar, two 3160 Cat. engines, set up for boat engines plus one transmission for engines, $1000 for all; Larry Busack nnn-nnn-nnnn (Longview WA)
Cedar Rapids Speed Governor, Pat May 14, 1912 Cedar Rapids, Iowa. Designed to be operated with hit and miss engines in order to even out the RPM of cream separators and other machinery needing to run at an even speed. Mounting plank has one damaged corner, otherwise the whole machine is in very good condition, $250. The patent application is very interesting to read. https://www.google.com/patents/US1109877 ; Dave Wirth nnn-nnn-nnnn or
xxxx@xxxx.xxx (Walla Walla WA) [see photos]
Cushion Cub 2 hp, EK mag. Runs. On homemade cart. One flywheel has a well done repair, $300. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Cushman Cub Bean Special. Rebuilt Wico mag 3hp throttle governed 800 RPM Model #R20-B. Nice engine tag, sn 73621. Good runner on 4 wheel dolly, $500; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Empire 5 hp (Rock Island, Alamo) hit & miss engine on original cart, sn 107745 Webster Tri Polar mag. Good runner, $1400; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Fairbanks Morse 1-1/2 hp headless block with piston & rod and misc. small parts, $80; Tom Street nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR)
Fairbanks Morse 1-1/2 hp headless, 1918 #305190. Runs with spark plug and mag. On a cart. Needs gas tank & iron skids, $750; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks Morse 1-1/2 hp hit and miss engine, never had running but looks complete and in very good shape, $500 or offer; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)
Fairbanks Morse 2 hp H 1915 engine. This model isn’t seen very often. On a nice homemade cart. Nice paint. Runs good, $850. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Fairbanks Morse 3 hp model Z, 1920’s, style B, sn C23437 Bosch mag. Made in Canada. Ready for restoration. Always stored inside. $375; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks Morse 3 hp Z, 1920. Complete, parting out; nnn-nnn-nnnn (Cheney WA)
Fairbanks Morse 3 hp, 1921, runs, $500 obo; Peggie McMullen nnn-nnn-nnnn (Happy Valley OR)
Fairbanks Morse belt pulley for 15 hp Z engine. May fit 10. Nice condition, $350; Dave nnn-nnn-nnnn (Aurora OR)
Fairbanks Morse FMZ model C, 1944. Enclosed crankcase. Runs, needs gas tank, $275; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks-Morse 4 hp H. On iron wheel wagon. good condition. Currently not running, everything is there. Has embossed Fairbanks-Morse on water hopper. Can send pictures. $1250; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Fuller & Johnson 1-1/2 hp vertical pump jack in good condition, $650; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Fuller and Johnson 6 hp N, 1913 (first year). Complete, original, crank guard, gear guard, hand crank, very nice, $1550; nnn-nnn-nnnn (Cheney WA)
Fuller and Johnson N-Kerosene 4 hp, 1914 (Produced a short time as a Kero model, then switched to a type K, this is a true hit and miss type N. Very hard to find) Has preheater, gear guard, hand crank, etc., $1450; nnn-nnn-nnnn (Cheney WA)
Fuller and Johnson vertical hit & miss pump jack engine. 1-1/2 hp buzz coil ignition on 4 wheel dolly. New cylinder sleeve & gas tank. Runs good, $1100; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Galloway 5 hp, 1910. Round rod on original cart. Complete, good condition, ready for restoration, $1800; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Gilson 5 hp. Approx. 70% original paint, original muffler, no cracks, breaks or welds, $2000. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Hercules 5 hp, Webster Mag. No cracks or repair on engine that I know of. A weld on the crank guard. No cart. Run good in the spring of 2015, $800. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Hercules IXA5 four-cylinder engine with Onan generator. Self-contained on skid/cart, very good condition and engine sounds and runs smooth, $500; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)
Holt engine, 5-1/4 bore, disassembled, good manifolds, pistons stuck, no carb or mag, missing one main bearing cap; Gene Stuckle nnn-nnn-nnnn (Davenport WA)
Ideal air cooled engine, complete in very good condition, $700; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
IHC 6 hp M parts: 2 flywheels, 1 side cover, 1 crankshaft, other misc parts, $200 obo; Gary Covert nnn-nnn-nnnn or xxxx@xxxx.xxx (Cottonwood AZ)
International Harvester 1-1/2 - 2-1/2 hp LB complete, runs, $250. Int’l 3-5 hp LB, complete, runs, $375. Both for $600; Richard Hanna nnn-nnn-nnnn (Hayden ID)
John Deere LUC power unit. 2 cylinder vertical engine on a cart. 12 hp. Not stuck, in good condition, late 1940's. From a JD12A pull-type combine. Last ran in 1995. Exhaust pipe has been broken off, $400; Richard Hanna nnn-nnn-nnnn (Hayden ID)
LeRoi 8 hp 2 cylinder upright on steel wheel cart. Model MH3 in good condition. Has not run since 1995. Set up to run a buzz saw, stored inside, $300; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Marine Diesel Engine: Volvo Penta Mod # AQAD40A, sn 26786 six-cylinder turbo diesel. Has been setting for a few years. Complete through bell housing. Sold as is, $900; nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Rosa CA)
Maytag-Multi Motor (vertical) restored, $450 & Maytag 72 restored on oak skids, $225; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
McCormick Deering 1-1/2 hp engine. 1928. Make offer; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)
McCormick Deering hit & miss engine, $250; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)
Olds 1-1/2 hp Model A. Runs good. Reproduction mixer, but looks original. On skids, $3500. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Ottawa 4 hp drag saw engine on cart. Wico mag, runs good, needs gas tank. Broken clutch handle, $450; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Sandwich 2-1/2 hp B18150 project engine, $350; Ray nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)
Sandwich 2-1/2 hp B18150 project engine, $200; Ray nnn-nnn-nnnn (Tucson AZ)
Sandwich Tulip Top 1-1/2 hp. Rebuilt Webster mag. No cart, on skids, $800. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Sattley Montgomery Wards 1-1/2 hp, great little engine, runs good, needs a nice home! $350 without magneto, $550 with magneto; nnn-nnn-nnnn (Cheney WA)
Steward Major. For running sheep shearing clippers (engine only), $600. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Stover 1-1/2 hp Y, sn T244732, restored on cart, email for pictures and details, $1000; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA
Stover 3 hp KE, 1926. Wico mag, on cart. Runs, $375; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Stover 3 hp, complete, not stuck, will run, $475; Don Chappell nnn-nnn-nnnn (St Helens OR)
Stover KC 6 hp, hit and miss, $900; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Stover KE 1.5 hp, $450; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Vintage Hercules IXA5 four cylinder gas engine self-contained on a skid, has an Onan 6000 watt generator attached to it, engine starts and runs good and smooth, no smoke, needs a gas tank as I used a portable tank to see if runs, do not know if generator works, this unit is clean, looks to of been well taken care of, $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Wade drag saw engine on cart, no saw frame. Runs, $100. Have other drag saws available (Wards, Sawyer 5001) and blades, too; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Ward 12 hp, sideshaft, hit and miss, $6000; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Waterloo Boy 2.5 hp with cracked water jacket, $800; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Waukesha 4 cyl gas engine, model FC-16, sn 430599 on cart. Used on Case combine, 1930’s. Good condition. Last used 1995, $300; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Waukesha 4 cyl gas engine, model XA226C, sn 123168, circa 1930’s. One cylinder blown, parts engine pretty much complete, $50; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Western 25 hp, hit and miss, $10,500; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Witte 2 hp, on a nice homemade cart. EK mag. New round fuel tank, $800. I can load this locally or will crate; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Witte 4 hp, 1915. Headless on skids. Ready for restoration, $795; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Witte 4 hp, sn 184915?, fully restored on oak skids, oak battery box, email for pictures and details, $1000; Kathy Repp, nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)