1940’s vintage Continental Industrial Y69 four cylinder gas engine. The engine was used on a self-power hay bailer. The engine turns over, not stuck, $250 obo; Greg nnn-nnn-nnnn (Lakeport CA)
3 HP Sover CT 3 $450.00 Bruce Heppler 707 983-9147 (Northern CA)
Aermotor 8 cycle, needs new paint and some TLC, $800 obo; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Alamo 6-1/2 hp, Baker Hamilton tag, older restoration, $1200; Bruce Heppler 707 983-9147 (Northern CA)
Associated 2-1/4 hp, $675; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Associated 4 hp, hit & miss, mounted on homemade steel cart, runs good, $1400; Larry Daniels nnn-nnn-nnnn (Phelan CA)
Associated Chore Boy 1-2/4 hp, sn 30566 on cart. New ignitor, complete, $750; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Atlas Imperial. Rare 4HM282 6.5 bore, 8.5 stroke, 60 hp at 400 rpm. Weight 6210 lbs. Running enine currently in yacht taken north annually. Vessel repowering in February. Engine will be partially disassembled for removal and reassembled. Lots of spares, manuals, tools. $18,000 obo; Mike nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Caille Perfection 4 hp, with Fairbanks Morse air compressor, $1200; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Caterpillar, two 3160 Cat. engines, set up for boat engines plus one transmission for engines, $1000 for all; Larry Busack nnn-nnn-nnnn (Longview WA)
Cedar Rapids Speed Governor, Pat May 14, 1912 Cedar Rapids, Iowa. Designed to be operated with hit and miss engines in order to even out the RPM of cream separators and other machinery needing to run at an even speed. Mounting plank has one damaged corner, otherwise the whole machine is in very good condition, $250. The patent application is very interesting to read. https://www.google.com/patents/US1109877 ; Dave Wirth nnn-nnn-nnnn or
xxxx@xxxx.xxx (Walla Walla WA) [see photos]
Cushion Cub 2 hp, EK mag. Runs. On homemade cart. One flywheel has a well done repair, $300. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Cushman Cub Bean Special. Rebuilt Wico mag 3hp throttle governed 800 RPM Model #R20-B. Nice engine tag, sn 73621. Good runner on 4 wheel dolly, $500; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Domestic 2 hp, sideshaft, $2250; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Empire 5 hp (Rock Island, Alamo) hit & miss engine on original cart, sn 107745 Webster Tri Polar mag. Good runner, $1400; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Fairbanks Morse 1-1/2 hp headless, 1918 #305190. Runs with spark plug and mag. On a cart. Needs gas tank & iron skids, $750; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks Morse 3 hp model Z, 1920’s, style B, sn C23437 Bosch mag. Made in Canada. Ready for restoration. Always stored inside. $375; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks Morse 3 hp Z, 1920. Complete, parting out; nnn-nnn-nnnn (Cheney WA)
Fairbanks Morse 4 cylinder magneto X4B11B, turns counterclockwise, just out of the shop, very good spark, $200. Wico model X spec XH-1769 just out of the shop, turns counterclockwise, very good spark, $200. New Old Stock Bendix drive units, these are very old, model A-1795 I have several of these, some still in the box, $40 each; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)
Fairbanks Morse FMZ model C, 1944. Enclosed crankcase. Runs, needs gas tank, $275; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks-Morse 4 hp H. On iron wheel wagon. good condition. Currently not running, everything is there. Has embossed Fairbanks-Morse on water hopper. Can send pictures. $1250; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Fairmont railway engine, good compression, $400; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Fuller & Johnson 1-1/2 hp vertical pump jack in good condition, $650; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Fuller and Johnson 6 hp N, 1913 (first year). Complete, original, crank guard, gear guard, hand crank, very nice, $1550; nnn-nnn-nnnn (Cheney WA)
Fuller and Johnson N-Kerosene 4 hp, 1914 (Produced a short time as a Kero model, then switched to a type K, this is a true hit and miss type N. Very hard to find) Has preheater, gear guard, hand crank, etc., $1450; nnn-nnn-nnnn (Cheney WA)
Fuller and Johnson vertical hit & miss pump jack engine. 1-1/2 hp buzz coil ignition on 4 wheel dolly. New cylinder sleeve & gas tank. Runs good, $1100; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Fuller Johnson pump engine, stuck, $100; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Galloway 5 hp, 1910. Round rod on original cart. Complete, good condition, ready for restoration, $1800; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Gilson 1-1/2 hp, Johnny on the Spot, with drillpress, $850; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Gilson 5 hp. Approx. 70% original paint, original muffler, no cracks, breaks or welds, $2000. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Holt engine, 5-1/4 bore, disassembled, good manifolds, pistons stuck, no carb or mag, missing one main bearing cap; Gene Stuckle nnn-nnn-nnnn (Davenport WA)
Ideal air cooled engine, complete in very good condition, $700; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
IHC 6 hp M parts: 2 flywheels, 1 side cover, 1 crankshaft, other misc parts, $200 obo; Gary Covert nnn-nnn-nnnn or xxxx@xxxx.xxx (Cottonwood AZ)
International 1 hp, Mogul Jr, $2500; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
International Harvester 1-1/2 - 2-1/2 hp LB complete, runs, $250. Int’l 3-5 hp LB, complete, runs, $375. Both for $600; Richard Hanna nnn-nnn-nnnn (Hayden ID)
John Deere 3 hp, unrestored, ignitor with magneto, $800; Bruce Heppler 707 983-9147 (Northern CA)
John Deere LUC power unit. 2 cylinder vertical engine on a cart. 12 hp. Not stuck, in good condition, late 1940's. From a JD12A pull-type combine. Last ran in 1995. Exhaust pipe has been broken off, $400; Richard Hanna nnn-nnn-nnnn (Hayden ID)
LeRoi 8 hp 2 cylinder upright on steel wheel cart. Model MH3 in good condition. Has not run since 1995. Set up to run a buzz saw, stored inside, $300; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Marine diesel engines. Perkins 4108 50 hp marine or industrial. Farryman V-twin 30 hp. Yanmar 1GM10 9 hp. These are low hour runners, $1500 each obo; Mike nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Maytag-Multi Motor (vertical) restored, $450 & Maytag 72 restored on oak skids, $225; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
McCormick Deering 1.5 hp M, good condition on original cart, $600; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
McCormick Deering 1-1/2 hp engine. 1928. Make offer; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)
McCormick Deering hit & miss engine, $250; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)
Monarch 1-1/2 hp, $675; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
New-Way 2-1/2 hp, horizontal, $550; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
New-Way 4 hp, vertical, $850; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Olds 1-1/2 hp Model A. Runs good. Reproduction mixer, but looks original. On skids, $3500. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Ottawa 4 hp drag saw engine on cart. Wico mag, runs good, needs gas tank. Broken clutch handle, $450; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Rawleigh Schryer 4 hp, $1200; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Root & Vandervoort 1 hp, $850; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Samson 3 hp, $6700; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Sandwich 2-1/2 hp B18150 project engine, $200; Ray nnn-nnn-nnnn (Tucson AZ)
Sandwich 2-1/2 hp, 26 inch flywheels, $2000; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Sattley Montgomery Wards 1-1/2 hp, great little engine, runs good, needs a nice home! $350 without magneto, $550 with magneto; nnn-nnn-nnnn (Cheney WA)
Steward Major. For running sheep shearing clippers (engine only), $600. I can load this locally or will crate. Buyer will need to pay for shipping; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Stover 1-1/2 hp Y, sn T244732, restored on cart, email for pictures and details, $1000; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA
Stover 1-1/2 hp, with cream separator pulley, $950; Dan Sudul text or call nnn-nnn-nnnn (Sherwood OR)
Stover 3 hp KE, 1926. Wico mag, on cart. Runs, $375; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Stover 6 hp YC, on saw cart, older restoration, $2000; Bruce Heppler 707 983-9147 (Northern CA)
Stover CT3, runs good on skids, $600; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Wade drag saw engine on cart, no saw frame. Runs, $100. Have other drag saws available (Wards, Sawyer 5001) and blades, too; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Witte 2 hp, new rings, valves, gas tank. Rebuilt Wico EK mag, on skids, $400 obo or trade; Dale Somers nnn-nnn-nnnn (Medford OR)
Witte 2 hp, on a nice homemade cart. EK mag. New round fuel tank, $800. I can load this locally or will crate; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Witte 4 hp, 1915. Headless on skids. Ready for restoration, $795; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Witte 4 hp, sn 184915?, fully restored on oak skids, oak battery box, email for pictures and details, $1000; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)