February 2016 - Tractors & Parts For Sale

All Classified Ads

Agricat crawler, hydraulic loader/bucket, good tracks, good condition, runs and drives well, $1300; Larry nnn-nnn-nnnn (Phelan CA)

Allis Chalmers B, 1940, sn B47590. Engine overhauled in 1995 but is now stuck. No oil pressure so parked and stored inside since. Fair rubber, good sheet metal, $500; Richard Hanna nnn-nnn-nnnn (Hayden ID)

Allis Chalmers B, 1950, parade ready, rebuilt engine, bearings and seals in transmission, new brakes, has hydraulics and pto, like new tires, paint and decals. Will be at the Portland Ag Show if I still own it. Pictures and more info on request, $3500; Dennis Kytola nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgefield WA)

Allis Chalmers B, excellent parade condition $3000; Ron Hisken nnn-nnn-nnnn or nnn-nnn-nnnn cell (Oregon House CA)

Allis Chalmers B,1939 wide front, crank start, recent overhaul, runs good, suitable rubber, good paint. Parade ready; Bob Jordan nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

Allis Chalmers C, 1947 wide front, engine overhauled, runs good, good paint, new rear tires, new battery. Parade ready, $1600 obo; Bob Jordan nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

Allis Chalmers G, 1948, restored 3 yrs ago. New paint, 4 new tires & tubes. Transmission has the 2 low gears, converted to 12 volts. New lights, hydraulics, cultivator, extra trans & bell housing, $3500; Rex Wright nnn-nnn-nnnn (Ione CA)

Allis Chalmers M crawler, good engine, transmission, steering clutches, and rear end. Tracks 40%. Needs minor work on the left track adjustment. The blade is too heavy for this machine, needs to be changed to a lighter one, $1500 obo; Tim Crockett nnn-nnn-nnnn (Centralia WA)

Case 400 tractor sales brochure, 23 pages & Op Manual for “IXF – 3” engine, 16 pages, 1/48, $15; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Case C parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, 1930, with extension rims, runs and drives great! Needs air stack, $3000; Todd Schwartz nnn-nnn-nnnn (Vernon BC)

Case C, S or R F&H hc245 rear round spoke wheels, 9x24, very nice and rare, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case D tractors, have two. One with new rubber and the other with good rubber. Both have good sheet metal and run and drive well; Jerry nnn-nnn-nnnn (Gaston OR)

Case DC parts for sale, 1950's, one complete transmission with rare extra wide axles for 98 inch tread, comes with fuel tank and dash, steering wheel, fenders, cast wheel centers, hydr pump, single disk brakes, clutch linkage, ready to bolt to engine $300 one case DC rear wheel weight $50 one front wide adjustable front for parts, off of a 52 $150; David Santoro nnn-nnn-nnnn (Hillsboro OR)

Case DI gas tank, $50; Ben Lyon nnn-nnn-nnnn (Gig Harbor WA)

Case DO, very straight metal, pto, remote hydraulics, eagle claw hitch, $850; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case S, complete but not running, $750; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case VA, 1948, no serial # tag. Previous owner said original owners bought in 1948. Nice restored tractor. Good tires. Runs good. Full set of books to go with the tractor, $1500 obo. Have a Case 6' mower that could go with the tractor. Also a 1 bottom plow available; Don Zimmerman nnn-nnn-nnnn (Hermiston OR)

Case wide tread tractor, 1936, on full steel, includes set of rubber tires & wheels plus a cultivator, $4650; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10, good running, good shape, $1800 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 15, sn PV4569, standard gauge, top seat, engine turns over, has compression, complete except for side curtains, $1800; Drake Schmid nnn-nnn-nnnn (Stockton CA)

Caterpillar 22, sn 2F7953W, wide gauge, top seat, engine turns over, has compression, complete minus side curtains and spark plug covers and belt pulley, $1400; Drake Schmid nnn-nnn-nnnn (Stockton CA)

Caterpillar D4, pony motor, runs, $2000. Hydraulic pump for D4 Caterpillar, $100; Tommy nnn-nnn-nnnn or xxxx@xxxx.xxx (Helendale CA)

Caterpillar: Ensign carbs for Cat 20, 30 all rebuilt, $450. D2-D6 battery box covers with thumb screws, $80. D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Cockshutt 30, original starting crank; Al nnn-nnn-nnnn (Elko NV)

Collection of original Caterpillar Manuals for early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Will entertain offers as a collection, $250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Co-Op E3 (Cockshutt) 1947, narrow front, beautiful restoration. Professional automotive paint with decals. Sanitary 12 V conversion. Live PTO high and low range. New padded seat, new tires. Runs strong and sounds great, $2500 obo; Rick Murray nnn-nnn-nnnn (Klamath Falls OR)

Co-Op E-3, 1949, wide front end, runs good, looks good, engine gone through with new water pump, rebuilt generator, carburetor, starter, average tires, also includes another E-3 parts tractor with a loose rebuilt Buda engine, $1400 obo or possible trade; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Farmall A, restore or parts, good FFA project, $500 obo; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall C, 1951, sn 74296, ready for restoration, “new-in-box” sleeve/pistons assemblies, extra tire and misc. parts, loader (?) IHC 7’ side–mount mower, good sheet metal, $1000; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Farmall Cub collectors, rare aftermarket 1949 - 1950s rear orchard fenders with brass tags from Bowman Tractor Fenders and Fruit Shields, Santa Ana, CA. Need painted. Pictures available, $650; Bob Petersen nnn-nnn-nnnn (Solvang CA)

Farmall Cub starter, $75; Chuck Kaufman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hood River OR)

Farmall Cub, 1950. Very unique with custom hydraulic belly blade and ripper bar. Very straight. Good for landscaping or corral, $1800 obo; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall Cub, 1952, straight sheet metal, old faded paint, runs great, trans is quiet, hydraulics function properly. New front tires. Old rear tires have cracks but have a lot of tread, $1300; Larry nnn-nnn-nnnn (Phelan CA)

Farmall H belt pulley gear box, excellent condition, $65. Front radiator shutters and controls for H Farmall. Repainted, excellent, $80; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall H rear skeleton steel wheels with lugs in good shape, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall H, 1940, sn 49095. Very complete and good tin. Tires ok, engine stuck, $1100 obo; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall M, tall tractor, gas, has gear type drop boxes and 20" single front. Engine free but not running, stored inside, good sheet metal and tires, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall MD, with live hydraulics and belly system, Behlen power steering, belt pulley, drawbar, runs well, stored inside, good sheet metal, good rubber, new on narrow front, $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall parts and tires. Call me with your needs and questions; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall sheet metal from A to 450 plus misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super A ,1951, sn 303961. Two-valve hydraulic, Woods five-foot rotary mower with new blades/belt, good running/working tractor with good sheet metal, $2000; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Farmall Super C, 1952, wide front, 4 new tires & tubes, front loader w/hyd pump on front of engine, 3 new hyd. cyl., power steering, 3 point hitch w/2 new hyd. cyl., 3 pt backhoe, PTO pump, 12" bucket. Everything works, $3500; Rex Wright nnn-nnn-nnnn (Ione CA)

Farmall Super H, 1954, live hydraulics, paint & decals 3 years old, International windbreaker included, new fire crater piston and sleeves, $2950; Al nnn-nnn-nnnn (Elko NV)

Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Ferguson 35 Special, 1960. New gaskets & seals in engine & trans., new axle bearings & seals in deff., high low trans, front loader, good rear tires w/new tubes, new tires & tubes on front, rear wheel weights. Runs good, $2200; Rex Wright nnn-nnn-nnnn (Ione CA)

Ferguson TO 20 and TO 30 parts. Have some tin in fair to good shape, foot rests, hydraulic pumps, transmissions, rear ends, and engine parts. Reasonable prices, possible trades for Ford N parts or whatever. Can help load; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

Firestone 13.6x28 tire, 50% tread, $125; Tom Smith nnn-nnn-nnnn (Creswell OR)

Ford 8N distributor. Complete with cap and coil. Front mount. Ran good when removed, $75; Hardy McFarland nnn-nnn-nnnn (Sutter CA)

Ford 8N with loader. Runs & looks good, $3000; Jim Keith nnn-nnn-nnnn after 4:30PM (Cloverdale OR)

Ford 8N, 1948 Orchard or Vineyard tractor. Width cut down by machine shop. 3 point hitch, good tires, wheel weights on all 4 wheels, engine turns over, dist. missing, $475; Rex Wright nnn-nnn-nnnn (Ione CA)

Ford 8N, late model, side distributer, 12 volt alternator, good tires front and back, runs good, good tin, good 3 pt, pto, $2500; Larry nnn-nnn-nnnn (Dorris CA)

Ford 8N, much work done, painted 2 years ago, good tires, $2500; Ron Hisken nnn-nnn-nnnn or nnn-nnn-nnnn cell (Oregon House CA)

Ford 8N, restored, original rubber, newer paint, lights, front bumper, sn 177. Very very nice, $3875; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 9N with Howard rotovator and creeper gear, 6 volt, starts and runs good, rear tires like new, straight tin, needs paint, works good, $2600 obo; Larry nnn-nnn-nnnn (Dorris CA)

Ford NAA, runs strong, call for details, $1000 or trade for 2 hp or smaller hit & miss engine; Daryl nnn-nnn-nnnn (Acme WA)

Ford NAA, Sherman step up, strong engine, good tin and tires, $3500; Ron Hisken nnn-nnn-nnnn or nnn-nnn-nnnn cell (Oregon House CA)

Ford rear wheel weights, 2 sizes, $100 per pair; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

Fordson 1927 tractor, lawn art, $300. Fordson 1922 tractor, lawn art, $300; Tommy nnn-nnn-nnnn or xxxx@xxxx.xxx (Helendale CA)

Grille (front) for Oliver OC3 or Cletrac HG crawler, very good condition, has side curtains also. Pics available, $375; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Hamilton transmission for a Fordson F. Looks to be OK, still closed up, all covers in place. Can help load. Only know what I've read online. Built in the mid to late 20's in Oakland, California, by the Standard Gas Engine Company. $500; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

International 350 Hi-Utility, fast hitch, 1 remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International parts: Single front wheel and yoke. Fits M and H International. Dual narrow front tires and pedestal also fits M and H International. Both in good shape, $100 each; Tim Crockett nnn-nnn-nnnn (Centralia WA)

International TD 9 crawler, 4 roller track frame, beautiful 22 inch pads on wide gauge, no blade or pto, engine is free, good tin $800; David Santoro nnn-nnn-nnnn (Hillsboro OR)

International TD6, rare 1954 orchard model crawler tractor. Has new rings & bearings, new valve job, new paint (5 years ago) and decals. Just had injector pump overhauled. Undercarriage about 70%. Runs great, looks good, has all factory equipment (seat, tool box, etc), $5100 obo; Dale Roth nnn-nnn-nnnn (Crawfordsville OR)

John Deere tractors: AO styled, AO unstyled, LA, 420’s, LA’s, 40’s, 50, MT, 430U and others, price upon request; Len nnn-nnn-nnnn (Abbotsford BC)

John Deere 40 crawler, 4 roller UC with manual angle blade, good tracks, runs good, steers excellent both ways, nice little crawler, $3200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 420 air cleaner for 2 cylinder John Deere tractors. Have pics. Nice shape and complete, $100; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 420 head, m-3995-t, rebuilt, ready to bolt on, $400; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere 420 Highcrop, sn 132818, all redone, like new, $11000 US obo; Len nnn-nnn-nnnn (Abbotsford BC)

John Deere 420/440 crawler new brake bands, rear belly pan for the JD 440; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 50, tricycle front with power steering, runs, has a Yakima hitch, $1600 obo; Delmer Riel nnn-nnn-nnnn (Yakima WA)

John Deere 520 row crop, narrow front, runs but not running now and not stuck, $4000 or trade; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 60 Orchard, sn 6047277, all redone, like new, $9000 US; Len nnn-nnn-nnnn (Abbotsford BC)

John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 620 LP, black dash, runs, on 42" rubber with 16" single front, with 3pt, no top link, air stack, new battery box, cables and seat cushions. John Deere 720, gas, black dash, turns over, on 42"rubber with 16"single front, 3pt, no top link, dual hydraulics, air stack, $3500 each or $6500 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere A brakes for late styled, $40; Ben Lyon nnn-nnn-nnnn (Gig Harbor WA)

John Deere A US, 1937. It has been pulling 4 years and is a consistent winner. This tractor has been completely overhauled and enhanced with .125 oversized pistons MW. It pulls with 14-9--38 151 Firestone top cuts and 4-12 on the front. The engine has Murphy roller rockers and 51, G carburetor, hot coil magneto and develops 55 hp on dyno. Has Mark V wheelie bars and weight brackets. Will let some weights go with it. I am quitting Tractor Pulling for health reasons. It's been 16 years of fun A great buy at $6500; Glen nnn-nnn-nnnn or xxxx@xxxx.xxx (Moses Lake WA)

John Deere A, 1941, $500; Ben Lyon nnn-nnn-nnnn (Gig Harbor WA)

John Deere A, 1941, few hours since engine work and painted, new rear tires, $3500; Ron Hisken nnn-nnn-nnnn or nnn-nnn-nnnn cell (Oregon House CA)

John Deere AR, 1936, with hard to find F&H round spoke wheels front and rear. Missing some parts, intake manifold, pistons and rods, valve springs, has nice hood and fuel tank. Would make a good parts tractor, pictures on request, $1500 obo; Jerry nnn-nnn-nnnn (John Day OR)

John Deere AR, 1951, runs good, includes No.5 sickle bar mower, $2400 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere B late model parts: uncut hood, $80. Rol-O-Matic,$125. Two sets of long rear axles, $150 per set. Two radiators, $60 each; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, sn 48713, single front, long axles, live hydraulics, rebuilt carburetor mag and generator, new seat, new sealed beam lights, 3 point hitch, paint looks good, very nice tractor, $2250 obo; Rick nnn-nnn-nnnn (Kuna ID)

John Deere BN, have two, 1937, one complete with round spoke wheels on rear, one parts tractor with round spokes on rear, only one wheel that is useable, $2300 for both; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)

John Deere D, 1935, complete, not stuck. Comes with brand new fenders & hood, very nice old '35 D, $2750; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1935, on rubber, has been restored, $5000; Steve nnn-nnn-nnnn (WA)

John Deere D's: Have three, 1929, 1936, 1938, very restorable and close to being complete, I have pictures if you are interested, $650 each; Rick nnn-nnn-nnnn (Kuna ID)

John Deere early A and AR magneto, Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere G US, 1941. It has been pulling for 3 years and has had many 1st and 2nd place wins. Pulls 5000-6500 3 and 4 miles per hour. Tractor has been completely rebuilt from front to back. Engine enhancements include Murphy head and manifold, Murphy roller rockers and Shellum DLTX51 carburetor, new valve springs and oversized valves. It pulls on 18-4-38 Firestone 151 top cuts. It is rated at 90 plus HP with .125 oversized MW pistons 12.4- 1 compression with gear drive starter. Great puller. Has Mark V wheelie bars and weight brackets. Buy it for $8500. Will let some weights go with it. I am quitting Tractor Pulling for health reasons. It’s been 16 years of fun; Glen nnn-nnn-nnnn or xxxx@xxxx.xxx (Moses Lake WA)

John Deere GM, sn 17189, single front, restored about 5 years ago, still looks very good, new tires 13-38, new battery, $4000; Rick nnn-nnn-nnnn (Kuna ID)

John Deere GP, 1929, steel rims with 6” extensions on rear, round spoke cutoffs in front, motor is free but missing a few parts, seat, valves, intake & exhaust, fenders are a little rough, hood and fuel tank are nice, magneto has good spark, front spindles are very nice, would make a good tractor to restore. Pictures on request. $1700 obo; Jerry nnn-nnn-nnnn (John Day OR)

John Deere GP: Will the party that borrowed the John Deere GP radiator from me please call me as I misplaced your phone number. Thank you, Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere GW, sn 27686, has very good tires 13-38, new rings, bearings reset, ground valves, rebuilt carburetor mag generator, runs very well, needs paint, $3500 obo; Rick nnn-nnn-nnnn (Kuna ID)

John Deere H parts: hood/fuel tank, clean, $150, grilles, each $25. Rear wheels good, $125 each. Front wheels, $35 each. H plow, complete with all mounting/lifting brackets, $250. Rear axle assembly, complete, $100 each. Seat/bracket, $50. Radiator, no leaks, $150. Lots more; Larry Schwarz nnn-nnn-nnnn (Centralia WA)

John Deere H, 1941, flywheel start, new major overhaul, carb and mag rebuilt, fan shaft and governor, clutch, brakes and all front end and rear axle bearings and seals replaced, all tires like new, new paint, fresh fluids, tractor with almost-new Big Tex trailer, 14 ft with ramps, chains & binders, $5500; Vaughn Parker nnn-nnn-nnnn (Bothell WA)

John Deere L parts, $100 for all; Ben Lyon nnn-nnn-nnnn (Gig Harbor WA)

John Deere L, early, hand start, with bottom sickle mower, engine loose, $1350 obo; Delmer Riel nnn-nnn-nnnn (Yakima WA)

John Deere manuals: JD 50 operators manual, $30; JD 60 operators manual, $30; JD 70 operators manual, $30; other two cylinder manuals and literature available, all manuals are originals; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

John Deere tracks for 3 roller MC and 3 roller 40, pressed pads, $600 each; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 135 with loader gas, and Massey Ferguson 35 diesel, no loader. Both in great condition run and drive great; Jerry nnn-nnn-nnnn (Gaston OR)

Massey Ferguson 811 skid steer loader, hydro with good running Perkins engine, tires need steering adjusted, some work, $2500; Larry nnn-nnn-nnnn (Dorris CA)

Massey Ferguson factory light set, 2 front headlights and 1 rear light with the flashing road light switch, $100; Chuck Kaufman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hood River OR)

Massey Ferguson late 60s early 70s model 130 diesel tractor 2 wheel drive, (little smaller than a Ford 8N) has 3 point hitch and PTO, been in same family most of it life, hours unknown but diesel sounds good, I think injector pump needs timed as it blows white smoke, tractor comes with rototiller and bush hog, $3000 takes all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 81: runs, all tin in good shape, $1000; Gary P. Collins nnn-nnn-nnnn (Petaluma CA)

McCormick Deering 10-20 orchard special, 1925. Low air cleaner, lower seat, I have one fender skirt that I will include. On original steel. Tractor was painted in the 80s but still looks good, has scratches etc. Starts easily, runs great, $1900; Larry nnn-nnn-nnnn (Phelan CA)

McCormick Deering 15-30, 1927, with extension rims, runs and drives great, all original patina, $3000. Located in Vernon BC; Todd Schwartz nnn-nnn-nnnn (Vernon BC)

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4 parting out: orchard belt pulley, shutters, plus misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1000. McCormick Deering O-4: Very early motor stuck, missing orchard sheet metal, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel engine free and 1 parts tractors, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering W30, 1935, with manual, 1 extension rim, older restoration, runs and drives, 2nd owner, $4000; Todd Schwartz nnn-nnn-nnnn (Vernon BC)

Minneapolis Moline R or U tank, $50; Ben Lyon nnn-nnn-nnnn (Gig Harbor WA)

Minneapolis Moline RTU, choice of two, $500 obo. Serial #411481, engine stuck, steering problem but I have a complete steering assembly to go with the tractor. Nice sheet metal. Serial #403938, engine free. Transmission sticky. Will probably need the top cover pulled and be cleaned up. Both tractors need tires but have good wheels. I have a set of tires to go with whichever tractor sells; Don Zimmerman nnn-nnn-nnnn (Hermiston OR)

Oliver 88, w/ farmhand F11 loader, later model loader with light use, good shape, runs great, PS, wide front, live PTO, 2 hydraulics, tin a little rough and could use 1 tire, will separate tractor and loader, $3800; Kent nnn-nnn-nnnn (Kuna ID)

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck, needs radiator and exhaust manifold, $6500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver service bulletins in a large Case binder over 3-1/2 inches thick. Dating from mid-1960s to early ‘73, very good condition, $35 postpaid. Oliver Operators Manual for Super “99” HC & diesel tractors, excellent, 5/56, $17 postpaid. Oliver Op Manuals for “1950” tractor, dated 10/64 & 5/68, excellent, each $17 postpaid; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston, ID)

Tire: Firestone Field and Road 15.5-38 8ply, 80% tread, $350; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Tires: Good pair of 18.4x34 rear tractor tires and wheels off of a Oliver 1600, $725 obo; 1 new 12.2x28 rear tire and wheel off of a Ferguson 30, with liquid, $350 obo; have several other tires; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Tires: Two 14.9 – 24 tractor tires, good shape, 80% plus tread, $200 each. Two 24 inch Ford tractor wheels, $150 each; Tim Crockett nnn-nnn-nnnn (Centralia WA)

Tires: two new 11.2-28 6 ply tires and tubes, never mounted, $500; two 16.9-28 8 ply tires, like new, mounted on 28" flat center rims, small center hole, 6 bolt pattern, off a Leland tractor, $750; Larry nnn-nnn-nnnn (Dorris CA)

Two vintage tractors not running, one is a Ford Golden Jubilee with Rupp Hi/lo auxiliary tranny, motor stuck, needs tires, has good sheet metal. The other tractor is a Massey Ferguson TO30 with Davis step through loader, motor is missing the head and oil pan, bucket needs work but tractor has like new rear rubber and real good sheet metal. Both tractors for $1900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Wheels: Allis Chalmers G rear wheels (2) to add duals. New condition, $50 each; Tim Crockett nnn-nnn-nnnn (Centralia WA)

Yanmar 1401D tractor side panels, $75; Chuck Kaufman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hood River OR)