Allis Chalmers collectors: A.C. RC, 1939, older restoration, tires good, runs great, pics on request; Stu Wade nnn-nnn-nnnn (Chico CA)
Allis Chalmers H-3, crawler 6-way blade no winch, $1800 obo; Fred Spring nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angels WA)
Allis Chalmers WD-45, 1955, collector tractor, museum quality, looks, runs and drives like new. New front tires with buffed rear Firestone tires, excellent for parades, $3775 or possibly for trade. Always looking for MM or MH tractors but will consider all trades trucks, cars, tools, firearms, etc.; “Jake” Gillette nnn-nnn-nnnn, lv msg or xxxx@xxxx.xxx (Adrian OR)
Allis Chalmers WD-45, running when parked, good project tractor for restoration work, $700 obo; Jim Koontz nnn-nnn-nnnn (Ducor CA)
Allis Chalmers, 1954. Restored, hand start, new paint and seat. Parked in N. Nev; Frank nnn-nnn-nnnn (Northridge CA)
Best tractors: Best 60. Best 30 w/top. Best 25; Bill Santos nnn-nnn-nnnn or nnn-nnn-nnnn (Applegate CA)
Big Bull; Bill Santos nnn-nnn-nnnn or nnn-nnn-nnnn (Applegate CA)
Case 1390 4-wheel drive, 13.6 x 38 tires, hydraulics; Wyatt nnn-nnn-nnnn (King City CA)
Case 310 dozer, canopy and winch in good working order, nice crawler; $4250; Don Chappell nnn-nnn-nnnn (St. Helens OR)
Case C, S or R F & H rear round spoke 9x24 very nice and rare, $400. Also Case C parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CC, 1938, all original, good sheet metal, hand start, tri-cycle mod., tires are up and ready, good running tractor, $1750; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
Case LA with 3-71 Detroit conversion, runs and drives, good condition, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case LA, 1947, runs good, near new tires, good sheet metal, original lights, new deck, new rebuilt starter. Would make a great puller, $1750; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
Case SC engine and radiator parts; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case SC wheels, have two 38x12, good condition, $250; Ed Bring nnn-nnn-nnnn (Molalla OR)
Case tractor parts: SC, VAC, hood, fenders, crank, cam, sleeves, floorboards, dash, brakes, clutch and more. 500 6 cylinder diesel hood and engine parts; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAC parts, misc. engine parts, fenders, fuel tank, hood, grill, rear axle housing, torque tube, front dual tire spindle, belt pulley with hydraulic pump, radiator, 11.2x28 tires and good rims, rear weights; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAC, 1949, one-wheel front end, 3pt hitch and 540 PTO, starts and runs good, original paint, no rust, tires have good tread, 11x28 rears, 15 front, $1500; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Caterpillar 10, wide gauge, runs and drives, under carriage wore, $3500; Aaron nnn-nnn-nnnn (Walnut Grove CA)
Caterpillar 12, sn 8T16356 motor grader electric start, runs and drives. Will grade a road as is, needs work, call evenings, $1500; Ken nnn-nnn-nnnn (Yelm WA)
Caterpillar D2 5U, enclosed cab, hydraulic blade, late model-curved clutch levers, direct electric start with factory glow plugs, runs good, nice Cat, $6250; Don Chappell nnn-nnn-nnnn (St. Helens OR)
Caterpillar motor grader, 12 foot blade, new cutting edge, good end bits, new front tires, rears at 80%, $3000; Wyatt nnn-nnn-nnnn (King City CA)
Caterpillar parts: Ensign carbs for Cat 20, 30 all rebuilt, $450; D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Caterpillar tractors: Caterpillar 60, 1926, w/top. Cat 30, 4 available. Cat 15, wide gauge. Cat 15, 3 available. Cat RD 6. Cat 2 ton, 4 available; Bill Santos nnn-nnn-nnnn or nnn-nnn-nnnn (Applegate CA)
Celtrac F; Bill Santos nnn-nnn-nnnn or nnn-nnn-nnnn (Applegate CA)
Celtracs- have 3 Celtracs for sale, and many more items. This is an accumulation of many years of hard pickin; Don Stone nnn-nnn-nnnn (Prosser WA)
Cletrac AD,1937, restored, sandblasted and painted, good tracks, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, restored, sandblasted and painted, hydraulic Issacson dozer blade, good tracks, $2900 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cockshutt original starting crank, $10 Al Barkl (Elko NV)
Farmall 350, 1958, wide front end, fast hitch, power steering, rebuilt head, bearings rings etc., new radiator and hoses, tires have cracks but the treads are nearly 100 percent, tractor runs and drives well, previous owner sandblasted the sheet metal but it is still rust free, $1950; Larry nnn-nnn-nnnn (Phelan CA)
Farmall Cub engine, turns over, needs rebuilding, $100; Wyatt nnn-nnn-nnnn (King City CA)
Farmall Cub starter, worked well on bench, $75; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)
Cockshutt 40, 1950, row crop, adjustable front and rear axles. Complete new restoration, Omni paint, professional built, balanced, high performance, 230 Buda gas. New front serviceable 13-6 x 38 Firestone tires. Nice tractor, have documentations and restoration pics available for email, $4500; Francis Garceau nnn-nnn-nnnn (Jefferson OR)
Farmall Cubs, have 4, scrapers, disc mowers, 4ft BeGe tool bars, hydraulics, draw bars, $1800; Wyatt nnn-nnn-nnnn (King City CA)
Farmall M, tall tractor, gas, has gear type drop boxes and 20” single front. Engine free but not running, stored inside, good sheet metal and tires, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall O-12 parts tractor, engine block, trans/rear section, dash with early tag, $100; Larry nnn-nnn-nnnn (Phelan CA)
Farmall Super A, good tires, factory remote hydraulics, $3000; Wyatt nnn-nnn-nnnn (King City CA)
Farmall Super A, International 1000 loader, 3-point forks with blade, $4500; James Kittelson nnn-nnn-nnnn (Dallas OR)
Farmall Super C, 1951, runs real good, wide front, all 4 wheel weights, belt pulley, converted to alternator, headlights, straight tin ware, needs paint, tires worn but hold air, $1600, for pics request by email; Don McCaw nnn-nnn-nnnn or xxxx@xxxx.xxx (Harrison ID)
Farmall Super H, 1954. New sleeves & pistons, runs excellent, live hydraulics; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super H, restored 3 years ago with new fire crater pistons and sleeves and new paint, runs excellent; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall tractor and parts: Farmall Super M motor stuck, great project, $700. Farmall sheet metal from A to 450 plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Ferguson parts: Ferguson TO-20 and TO-30, rebuilt head, some fair tin, pumps, transmissions, differentials, wheels, reasonable prices; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ferguson TO 20 and TO 30 parts, engine blocks are cracked, many good parts available, selling at reasonable prices. You name the price and see if I go along, that’s reasonable right? Can ship smaller pieces, larger & heavier need to be picked up. We are always available to help you load; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ferguson TO 30, runs good, good tires, 6 volt, with Howard transmission but it only works in reverse, $1500. Also have a parts tractor for another $300; Mark Schukar nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
For parts: Massey Ferguson 65, Oliver 77, Minneapolis Moline M5 diesel, Allis Chalmers K-35 crawler; Buck nnn-nnn-nnnn (Greenville IL)
Ford 800, have two. One runs good, near new tires, 5ft front bucket, 5ft rear scraper, Sherman transmission. Other one can run, useable tires. Want to trade for Kubota or Mitsubishi or ?; Pete nnn-nnn-nnnn (Bishop CA)
Ford 871 Select-o-Speed tractor, 1962, sn 166618, looks good, runs good, new rear tires, pto, 3-point hitch, 2846 hrs, bad trasmission, $2000 or trade; Carl nnn-nnn-nnnn (Upper Lake CA)
Ford 8N, restored, original rubber, newer paint, lights, front bumper, sn 177. Very, very nice, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford N tractors, equipment and parts; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford tractors- Ford 1941 9N and 600, not running, some hood tin for the 600 in really good condition, will make you a good deal; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Holt tractors: Holt 45, 1918. Holt 2 ton, 3 available; Bill Santos nnn-nnn-nnnn or nnn-nnn-nnnn (Applegate CA)
Hubs: John Deere HWH/HNH, rear hubs and correct B 1189 clamps. These hubs are reproduction and match originals very well. My cost $3100 will sell for $3000; can ship UPS weight 43lbs each; prefer email for pics or questions; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
International 350, hi-utility, fast hitch, 1 remote, runs, needs work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International Harvester O12, engine stuck, missing hood and the tops of the fenders, $700; Larry Daniels nnn-nnn-nnnn (Phelan CA)
International Harvester, all brass 15-30 carburetor, $75: Dave Itel nnn-nnn-nnnn (Aurora OR)
International T6 late model, parts only. Engine (stuck) through final drive sprockets only. Said to have rolled off trailer before idiot started cutting it up, $1000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
International TD-14, have two, one 9-1/2ft tilt dozer, one farm tractor, both have double valve BE-GE pumps; Wyatt nnn-nnn-nnnn (King City CA)
International TD6 for parts, 1947, good rails and track chain, good blade, many good parts, email for pictures; Don McCaw nnn-nnn-nnnn or xxxx@xxxx.xxx (Harrison ID)
John Deere 40 and JD MT running when parked, excellent tin, 40 has 3pt, good tires, $3500 both obo, call for more info and pics; Jim Koontz nnn-nnn-nnnn (Ducor CA)
John Deere 400 backhoe sn 338871. Parts or fix. I was told ran 3 years ago. New fuel tank, nice front tires. Can load, call evenings, $1000; Ken nnn-nnn-nnnn (Yelm WA)
John Deere 40C, early, crawler with 3 roller undercarriage, tracks are good and very usable, has the Lindeman MC style rollers, decent grille, motor is not in machine and is apart, crank has been turned, has nice fenders and lots of good parts. Call for info, would rather sell all but will part out, can load; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)
John Deere 40U, 1953, has orchard fenders and exhaust, restored and painted in 2006, new tires all around, front weight, $7500; Jim Marchiando nnn-nnn-nnnn (Santa Barbara CA)
John Deere 420, crawler dozer with rare Holt hydraulic tilt blade, 5 roller undercarriage, tracks are about 60/70%. Sprockets are very good and have covers, starts and runs good, been sitting for 3 years. One side steering is stuck, water pump needs rebuilt, motor has good oil pressure and does not smoke. Has canopy, some of the pads need new bolts, has original tag. Crawler is a running driving machine but needs work. Can send pics, $3900; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)
John Deere 420S, phase three (slant steering), parting out. Grill $150, hood $50, fenders $50 each, radiator $100, cylinder head $250, dual Touch-O-Matic 5 speed transmission has quiet gears. Will be at Brooks OR Swap Meet June 24 & 25; Larry Schwartz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere 520, with hay loader, older restoration, runs good, in excellent shape, has 3pt and power steering, $5800; Jim Koontz nnn-nnn-nnnn (Ducor CA)
John Deere 620 LP Black Dash, runs, 42” rubber with 16” single front wheel, 3pt, no top link, air stack, new battery box, cables and seat cushions; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 430 W, sn 140238, with front loader. Good tag, no fenders, ready to work. Located in Coeur d’Alene ID, $3500 obo; prefer email for pics or questions; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere 720 diesel, 1956, $800; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)
John Deere 720 Gas Black Dash, turns over, 42” rubber with 16” single front wheel, 3pt no top link, dual hydraulics, air stack, $3500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A US, 1937. It has been pulling 4 years and is a consistent winner. This tractor has been completely overhauled and enhanced with .125 oversized pistons MW. It pulls with 14-9--38 151 Firestone top cuts and 4-12 on the front. The engine has Murphy roller rockers and 51, G carburetor, hot coil magneto and develops 55hp on dyno. Has Mark V wheelie bars and weight brackets. Will let some weights go with it. I am quitting Tractor Pulling for health reasons. It’s been 16 years of fun. A great buy at $6500; Glen nnn-nnn-nnnn or xxxx@xxxx.xxx (Moses Lake WA)
John Deere A on propane, runs, tin fair to good, needs tires and paint, good project tractor, $900, call for more info and pics; Jim Koontz nnn-nnn-nnnn (Ducor CA)
John Deere A, B, G, M and 60 parts. Email or text with needs; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere AN, 1939, verified by Deere to be a factory single front. Correct 36” rear wheels/tire, decent tin, complete, engine does not turn over, $1250 obo, can email or text pictures; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere AR, 1951, runs good, includes No.5 sickle bar mower, $2400 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)
John Deere B, 1936, 80% of the major mechanical restoration has been done, powder coated factory round spoke wheels, new rubber all around, too many to parts installed to list, just needs to be put back together; Tim Morris nnn-nnn-nnnn xxxx@xxxx.xxx (Napa CA)
John Deere B, 1937, good tin, good tires, new front tires, $2800; James Kittelson nnn-nnn-nnnn (Dallas OR)
John Deere B, 1938, long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3500; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1940, sn 86763, $1200; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)
John Deere B, 1947, in good restorable running shape, new 11.2 x 38 rear tires, really only needs good cosmetic restoration, $2000 obo, please only serious replies; Tim Morris nnn-nnn-nnnn (Napa CA)
John Deere B, 1949, wide front end tractor, good running tractor, nice sheet metal, and new tires. Has factory flat back rear end cover instead of the Power Trol system, $2500; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
John Deere B, 1949, wide front end tractor, in very good shape, runs but does have coolant leak coming from the bottom of the block, have good spare STD bore block to go with it, $3250, please only serious inquires; Tim Morris nnn-nnn-nnnn (Napa CA)
John Deere BO, 1946, sn 335642. Electric start with turning brakes, new fenders, new tires, spoked wheels, $4500, prefer email for pics or questions; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere BW, late model, complete, 42” wheels, wide front axle, in decent shape, one tie rod is broken, does not turn over, $1250 obo, can email or text pictures; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere D, 1929, restorable tractor, missing steering shaft, everything else seems to be there, comes with extra parts, radiator, curtain, two 26” rim, fender brackets, front hub caps, rear axle nuts, plus more, $600; Rick nnn-nnn-nnnn (Kuna ID)
John Deere D, 1935, complete, not stuck. Comes with brand new fenders & hood, very nice old ‘35 D, $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere D, 1937, runs good, on rubber, good sheet metal, working shutters, original condition, nice old rig, $2500; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
John Deere GW, sn 61138, $3500; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)
John Deere LA, 1944, electric start, new battery, belt pulley “Ooh-Ga” horn, lights, steps for climbing on, new tires on front, professionally overhauled-restored, toolbox, engine shut-off switch for safety, excellent condition, runs great, $3750; Jewell or Jim Scollenberger nnn-nnn-nnnn (Bend OR)
John Deere Lindeman, 1946, crawler with factory blade, starts easy, drives and steers good, nicest original Lindeman around with original paint, $5900 obo; Dave nnn-nnn-nnnn (Boring OR)
John Deere G US, 1941. It has been pulling for 3 years and has had many 1st and 2nd place wins. Pulls 5000-6500 3 and 4 miles per hour. Tractor has been completely rebuilt from front to back. Engine enhancements include Murphy head and manifold, Murphy roller rockers and Shellum DLTX51 carburetor, new valve springs and oversized valves. It pulls on 18-4-38 Firestone 151 top cuts. It is rated at 90 plus HP with .125 oversized MW pistons 12.4- 1 compression with gear drive starter. Great puller. Has Mark V wheelie bars and weight brackets. Buy it for $7500. Will let some weights go with it. I am quitting Tractor Pulling for health reasons. It’s been 16 years of fun; Glen nnn-nnn-nnnn or xxxx@xxxx.xxx (Moses Lake WA)
John Deere M, 1953, very clean, runs great, work or play, pics on request; Stu Wade nnn-nnn-nnnn (Chico CA)
John Deere MC parts: rollers, idlers, finals, sprockets with no grill. Also parts for JD 40 and 420 crawlers; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
John Deere MI, have two left, nearly complete restorations, many new parts, new tires. Prefer email for pics or questions; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere MC, 1951, sn 13643. This crawler was used in the Napa Valley by Christian Brothers as a pull tractor. To comply with OSHA it was retrofitted with ROPS. It has a late model air cleaner and beefed up drawbar, grill is nicely restored but unpainted, other tin including fenders are good. The aftermarket items would remove to restore to original but it makes a nice story as is, the workmanship is excellent, $3000, prefer email for pics or questions; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere parts. John Deere 60, parting out, lots left: crank, head, grill, hood, more misc. parts, call with needs. John Deere 30 cast centers for rack and pinion axles, part F1590R, $50 ea. Fairbanks Morse rebuilt early John Deere A and AR, magneto, in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere tires and wheels: John Deere B, 2 new Firestone 11.2 x 36 (10-36) with tubes mounted on painted pressed steel wheels. 2 11x 38 wheels, to fit cast iron hubs, JD A, G, $100 each. John Deere L, wheels weights, John Deere LA hubs, pair of John Deere L rear wheels with tires, $250. John Deere L, LI, M, cast iron front wheels, some with tires, $50 each; prefer email for pics or questions; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere, governor mounted hydraulic power pump, $100; Dave Itel nnn-nnn-nnnn (Aurora OR)
Kubota hood: Near new hood for Kubota B2350 and BX1860, $100 each; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Lots of tractors and parts- John Lauson; Emerson Brantingham Model AA; Titan 10-20; John Deere GP 10-20; John Deere D’s; Rumley Oil-Pull 20-35; Rumley Do-All; Ford 9N with hydraulic brakes; Buck nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
Massey Ferguson 130, diesel farm tractor with rototiller, bush hog, real good rubber, starts and runs good but smokes, good clutch, tranny etc., selling as is, $2500; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)
Massey Ferguson 35, have two, gas, excellent rear tires like new, ok sheet metal, run good, $1250; Don Chappell nnn-nnn-nnnn (St Helens OR)
Massey Ferguson, 135 diesel, 3 cylinder, Perkins with loader, runs but has some blow-by, 6 speed, 3pt, PTO, has power steering, good rubber, 14.9 x 24 tires, $2500 Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Massey Ferguson, 1365 loader, gas engine, 6 speed, 3pt, PTO, power steering, good rear tires, 16.9 x 24 with rear weights, $3700; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Massey Harris 101 JR Row Crop, 1944, runs good, older restoration, pics on request; Stu Wade nnn-nnn-nnnn (Chico CA)
Massey Harris 101 Jr., Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering 10-20 belt pulley minus cover and bushing, $50; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)
McCormick Deering O-12, mising hood, tops of fenders, carb, stuck engine, $650; Larry nnn-nnn-nnnn (Phelan CA)
McCormick Deering O-4, motor stuck, missing orchard sheet metal, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O-4, runs, missing orchard sheet metal, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering ODS-6s, rare, orchard diesel, engine free, also have one parts tractor, both for $1600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering T20 engine block, head, crank and other parts; Larry nnn-nnn-nnnn (Phelan CA)
McCormick Deering, I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering, parting out, have orchard belt pulley, shutters, plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering, TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline G1000 Wheatland diesel, 1966, 105hp, 18.4-34 rears, 1100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals. Can send pictures, $4000 obo; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline GVI, diesel, 1960, 68hp, 23.1-34 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes. With 9ft Cancade hydraulic, two-way, front blade. Can send pictures, $3300 obo; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline K3, Bale-o-matic baler, always shedded, engine free, nice complete machine, $1000; Boyd nnn-nnn-nnnn (Colfax WA)
Minneapolis Moline R, 1947, new paint, wiring, gauges, radiator, generator and starter. Tires are matched Firestone at 80%, nice looking and runs good, $1900; Chuck Barker nnn-nnn-nnnn (Millersburg OR)
Minneapolis Moline ZAN, 1949, not running, engine stuck, mostly complete except missing starter and carburetor, hood has typical rust, needs one rear tire, has two rear wheel weights on each side, parts or possible restoration, as is, $450: Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls, OR)
Minneapolis Moline, 445 utility, gas, 1956, 38hp 14.9-28 rears, 6.50-16 fronts, 3 point, 2 remotes, 540 PTO, good seat, front cross broken. With Minneapolis Moline model S43 hydraulic front loader, 44” bucket. Can send pictures, $3300 obo; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Oliver 990 GM Diesel, 1960, twin stick pto, hydraulic motor, engine stuck. Needs radiator and exhaust manifold, $6500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Rim: One 16 x 38 9 bolt pressed steel rim, John Deere yellow, $75; Francis Garceau nnn-nnn-nnnn (Jefferson OR)
Tire: Firestone Field and Road 15.5x38 8ply 80% tread, $350; Mark Parker nnn-nnn-nnnn (Lebanon OR)