August 2016 - Engines & Parts For Sale

All Classified Ads

Associated 1-3/4hp Chore Boy, sn 818223. Hooper cooled engine, wheel barrow cart, resorted, $1300, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Cushman 4hp C, engine. Has good compression with nice paint, on skids with a radiator and electric fan. A project that was never finished. $200; Mike Cristler nnn-nnn-nnnn xxxx@xxxx.xxx (Zamora CA)

Drag saws, two old drag saw, engines free, missing parts, $40 for both; Dave Itel nnn-nnn-nnnn (Aurora OR)

Economy 2-1/2hp E engine. Good little project engine, $225; Dave Itel nnn-nnn-nnnn (Aurora OR)

Fairbanks Morse 1-1/2hp, headless, 1918. On cast, runs with spark plug and magneto, no gas tank, $350; Rich Hanna nnn-nnn-nnnn xxxx@xxxx.xxx (Hayden ID)

Fairbanks Morse 6hp Z, sn718772. Hopper cooled, 4-wheel cart, original, $1400, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Fairbanks Morse FMZ, model C, 1944. Enclosed crankcase, runs, with portable gas tank, $275; Rich Hanna nnn-nnn-nnnn xxxx@xxxx.xxx (Hayden ID)

Fuller & Johnson 2-1/2hp model N. Great patina, runs good, bore is a little rough so there is some blow by but it's a great show engine, $775 or trade; Scott Denman nnn-nnn-nnnn xxxx@xxxx.xxx (Hillsboro OR)

Hercules 1-1/2hp model E Webster fired. Runs good, lots of life left, recent paint, has crank guard, $600 or trade; Scott Denman nnn-nnn-nnnn xxxx@xxxx.xxx (Hillsboro OR)

IHC 4hp Famous, sn SF118E, 1910. Hopper cooled, 4-wheel cart, restored, $4500; IHC 8hp Famous, sn A1983E, 1909. Screen cooled, 4-wheek trucks, restored, $9000, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

IHC 6hp M, snW17792. Hopper cooled, skidded, unrestored, $900; IHC 3hp M, sn W10591, 1926. Hopper cooled, skidded, unrestored, $900; IHC 1.5hp M, sn W73973. Hopper cooled, on skids, unrestored, $600, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

IHC 8hp Mogul, sn SZ549, 1914. Hopper cooled, 4-wheel cart with skid, restored, $7600; IHC 2.5hp Mogul, snCZ5682, 1917. Hopper Cooled, wheel barrow cart, restored, $1300, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

IHC Titan Jr. 1hp, older restoration on trucks, $1800; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere engines. Two 1-1/2hp JD E engines, for parts or restore, $425 for both; Dave Itel nnn-nnn-nnnn (Aurora OR)

LeRoi 8hp MH3. 2 cylinder, upright on cart, good condition, not stuck. Used to run buzz saw, $300; Rich Hanna nnn-nnn-nnnn xxxx@xxxx.xxx (Hayden ID)

McCormick-Deering M 1-1/2hp, 1927. Antique gasoline throttle governed engine, fully restored, beautiful old engine runs good. Comes with cart, manuals, handbooks, catalogs, gas engine history and restoration instructions, restored by Steven Gray of Sonora CA, view a video of this engine running on YouTube: https://youtube/jjOyK8LvGeY, pics upon request, $1200 firm, will consider delivery in Western USA for a reasonable fee; Horace Crawford nnn-nnn-nnnn xxxx@xxxx.xxx (Walnut Creek CA)

Monitor 7hp jump start hit n miss. Needs restoration, engine is disassembled, mostly complete, missing a couple items: connecting rod oil hook, water top cover, crank and†muffler, also needs Babbitt and lower crank†bushings.†Engine weighs approx 1300 lbs, buyer to arrange shipping, pics available upon email request, $3200 obo; Jack Chamberlin nnn-nnn-nnnn†xxxx@xxxx.xxx (Livermore CA)

Montgomery Ward Wisconsin gas engine, restorable, ran 15 years ago, $120; Jim Lovelace nnn-nnn-nnnn (Bend OR)

Montgomery Ward Airline Charger parts, $30; Jim Lovelace nnn-nnn-nnnn (Bend OR)

Olds 2hp 2-A, sn B4371, 1907. Tank cooled, 4-wheel cart, restored, $4500; Olds 3-4.5hp 3-A, sn B648, 1902. Tank cooled, 4-wheel cart, unrestored, $3750, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Ottawa 4hp, drag saw engine. On steel cart, runs, hot magneto, good compression, clutch handle broken, needs gas tank, $450; Rich Hanna nnn-nnn-nnnn xxxx@xxxx.xxx (Hayden ID)

Root & Vandervoot 1hp crank guard, $40; Dave Itel nnn-nnn-nnnn (Aurora OR)

Stover 1-1/2hp K, 1921, sn K141403. Runs very slow, spoked flywheels, open crankcase, grease cup, rod bearing, oil hole main bearings, new gas tank, rebuilt Webster Tri-polar magneto, on 4 wheel cart. Runs good, $1000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)

Stover 3hp K, 1926. On caster wheels cart, runs, hot Wico magneto, complete, slight wobble in one fly wheel, $375; Rich Hannon nnn-nnn-nnnn xxxx@xxxx.xxx (Hayden ID)

Stover 3hp, sn W97899, 1917. Hopper cooled, 4-wheel cart, restored, $2000, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Stover 4hp model T, 30" flywheels. Pretty sure it's all there except for the crank guard, needs a few parts freed up and put together, will make a great slow runner, $800 or trade; Scott Denman nnn-nnn-nnnn xxxx@xxxx.xxx (Hillsboro OR)

Waterloo Boy 1-3/4hp. Older restoration, could use a fresh paint job, engine is tired but runs great, $650 or trade; Scott Denman nnn-nnn-nnnn xxxx@xxxx.xxx (Hillsboro OR)

Webster 3hp Inverted, sn 3034. Tank cooled, 4-wheel cart, restored, $12500, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Witte 2hp hit nímiss head type throttle governed.†Runs good,†needs restoring, crank and rod bearings appear tight, $450 obo, check it out running on You Tube†link https://www.youtube.com/watch?v=gylpepb85bi; Jim nnn-nnn-nnnn xxxx@xxxx.xxx (Edmonds WA)

Witte 2hp, circa 1924, brass tag says Superior W.G. Runkels Machinery Co, Wico EK mag. Missing oiler, splash guard and main gas tank, has gear on crankshaft, no pulley, email me for pics and video of it running; Kip Keeney nnn-nnn-nnnn (Seattle WA)

Witte 4hp headless hit n miss engine, 1915, has brass tag, on skids, complete, not running, $750; Rich Hanna nnn-nnn-nnnn xxxx@xxxx.xxx (Hayden ID)

Wonder Waterloo Boy clone 3hp. Great patina, runs good, has Waterloo Boy governor unlike many clones, needs gas tank installed and plumbed, I've been running it on a portable tank, $675 or trade; Scott Denman nnn-nnn-nnnn xxxx@xxxx.xxx (Hillsboro OR)