September 2016 - Engines & Parts For Sale

All Classified Ads

Associated 1.75hp Chore Boy, sn 818223. Hooper cooled engine, wheel barrow cart, resorted, $1300, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Bates & Edmonds 2hp vertical Peerless, engine. On iron-wheeled wagon, runs, $4500; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Briggs & Stratton older engine, Model AP-205 255 101 904. 1 cylinder, air cooled, $400 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Chrysler Industrial 6-cylinder flathead engine from a Massey Ferguson combine, $400 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Drag saws, two old drag saw, engines free, missing parts, $40 for both; Dave Itel nnn-nnn-nnnn (Aurora OR)

Economy 2-1/2hp E engine. Good little project engine, $225; Dave Itel nnn-nnn-nnnn (Aurora OR)

Fairbanks 1-1/2hp model C. Power plant, very good condition, 36v, 41 amps, $450 obo; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)

Fairbanks H 2hp.  On iron-wheeled wagon, embossed Fairbanks Morse lettering on the hopper, complete, running engine, restored, great little runner, $1500; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fairbanks H 4hp.  On iron-wheel wagon, embossed Fairbanks-Morse lettering on the hopper, complete, not running, no cracks, great little engine to complete, $1250; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fairbanks Morse 1-1/2hp, headless.  On iron wheeled wagon, good runner, $550; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fairbanks Morse 6hp Z, sn718772. Hopper cooled, 4-wheel cart, original, $1400, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Fairbanks Morse, Jack Junior, 1910. Older restoration, old weld repair on main bearing cap and small piece broke out of piston skirt, runs nice, $750 or possible trade for throttle governed engine, email for pics; Tanner Remillard nnn-nnn-nnnn or Chopper_iron@hotmail (Pendleton OR)

Fairbanks N 12hp. On iron skids, complete, running engine, screen cooled tank, has been to many shows around the country, $10000 firm;  Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fairmont railroad section crew car engine, good condition, $350; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)

Fuller & Johnson 2-1/2hp model N. Great patina, runs good, bore is a little rough so there is some blow by but it's a great show engine, $775 or trade; Scott Denman nnn-nnn-nnnn xxxx@xxxx.xxx (Hillsboro OR)

Galloway 5hp, hopper round rod. Nice engine that runs, has good compression and what you can see of the bore is almost perfect, not on skids or a cart, includes a Galloway gas tank, no cracks or welds anywhere I can find, has a pulley, painted red. I am running out of room in my garage and the winter is not too far off, $1000; John Billing nnn-nnn-nnnn (Edgewood WA)

Goulds 3-piston waterpump.  Big unit, fully restored with visible crank and pistons, weighs over a ton, $1000; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Hercules 1-1/2hp E Webster fired. Runs good, lots of life left, recent paint, has crank guard, $600 or trade; Scott Denman nnn-nnn-nnnn xxxx@xxxx.xxx (Hillsboro OR)

IHC 4hp Famous, sn SF118E, 1910. Hopper cooled, 4-wheel cart, restored, $4500; IHC 8hp Famous, sn A1983E, 1909. Screen cooled, 4-wheek trucks, restored, $9000, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

IHC 6hp M, snW17792. Hopper cooled, skidded, unrestored, $900; IHC 3hp M, sn W10591, 1926. Hopper cooled, skidded, unrestored, $900; IHC 1.5hp M, sn W73973. Hopper cooled, on skids, unrestored, $600, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

IHC 8hp Mogul, sn SZ549, 1914. Hopper cooled, 4-wheel cart with skid, restored, $7600; IHC 2.5hp Mogul, snCZ5682, 1917. Hopper Cooled, wheel barrow cart, restored, $1300, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

IHC Titan Jr. 1hp, older restoration on trucks, $1800; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere engines. Two 1-1/2hp JD E engines, for parts or restore, $425 for both; Dave Itel nnn-nnn-nnnn (Aurora OR)

John Deere flywheel engine, runs, $700; Ron Hunt nnn-nnn-nnnn (Woodland CA)

John Deere 3hp E engine, $1700 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)  

McCormick-Deering M 1-1/2hp, 1927. Antique gasoline throttle governed engine, fully restored, beautiful old engine runs good. Comes with cart, manuals, handbooks, catalogs, gas engine history and restoration instructions, restored by Steven Gray of Sonora CA. View a video of this engine running on YouTube: https://youtube/jjOyK8LvGeY, $1000 firm, will consider delivery in Western USA for a reasonable fee; Horace Crawford nnn-nnn-nnnn xxxx@xxxx.xxx (Walnut Creek CA)

Model engine: All new 1/3 scale model hit n’ miss engine, The Flea. 6-5/8" diameter flywheels, 1-1/2" bore 1-1/2" stroke, cast iron construction. Fully self contained, finished and ready to run, $1500; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Model engines: Vaughn model, runs good, was developed by Debolt Machine, $1800. Canfield model mounted with a model pump jack, runs good and pump jack pumps water, $2000; Carroll Pederson nnn-nnn-nnnn (Bonney Lake WA)

Montgomery Ward Airline Charger parts, $30; Jim Lovelace nnn-nnn-nnnn (Bend OR)

Montgomery Ward Wisconsin gas engine, restorable, ran 15 years ago, $120; Jim Lovelace nnn-nnn-nnnn (Bend OR)

Olds 2hp 2-A, sn B4371, 1907. Tank cooled, 4-wheel cart, restored, $4500; Olds 3-4.5hp 3-A, sn B648, 1902. Tank cooled, 4-wheel cart, unrestored, $3750, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Root & Vandervoot 1hp crank guard, $40; Dave Itel nnn-nnn-nnnn (Aurora OR)

Stover 1-1/2hp K, 1921, sn K141403. Runs very slow, spoked flywheels, open crankcase, grease cup, rod bearing, oil hole main bearings, new gas tank, rebuilt Webster Tri-polar magneto, on 4 wheel cart. Runs good, $1000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)

Stover 3hp, sn W97899, 1917. Hopper cooled, 4-wheel cart, restored, $2000, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Stover 4hp model T, 30" flywheels. Pretty sure it's all there except for the crank guard, needs a few parts freed up and put together, will make a great slow runner, $800 or trade; Scott Denman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

Stover 4hp, good condition, $495; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)

Waterloo Boy 1-3/4hp. Older restoration, could use a fresh paint job, engine is tired but runs great, $650 or trade; Scott Denman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

Webster 3hp Inverted, sn 3034. Tank cooled, 4-wheel cart, restored, $12500, pics available; Burt Brennan nnn-nnn-nnnn (Napa ID)

Witte 2hp hit n’miss head type throttle governed. Runs good, needs restoring, crank and rod bearings appear tight, $450 obo, check it out running on You Tube link https://www.youtube.com/watch?v=gylpepb85bi; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Edmonds WA)

Witte 2hp, circa 1924, brass tag says Superior W.G. Runkels Machinery Co, Wico EK mag. Missing oiler, splash guard and main gas tank, has gear on crankshaft, no pulley, email me for pics and video of it running; Kip Keeney nnn-nnn-nnnn (Seattle WA)

Wonder Waterloo Boy clone 3hp. Great patina, runs good, has Waterloo Boy governor unlike many clones, needs gas tank installed and plumbed, I've been running it on a portable tank, $675 or trade; Scott Denman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

Worthington 1-1/2hp, hit n’ miss, on cart, $350; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)