October 2016 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B with plow made in 1941, older restore looks good and runs good, $2800; Dell nnn-nnn-nnnn (Buhl ID)

Allis Chalmers B, sn B108929, 1951 or 1952. Engine overhauled in 1983, 25-28 hrs on new engine, always under cover, bought from original owner in 1980, have original manual, new rear tires and new seat, sheet metal good, runs good, although it has a leaky front seal. Located about 1-1/2 miles from Cowlitz Prairie Threshing and Gas Show, $1200; Mike Markle nnn-nnn-nnnn or xxxx@xxxx.xxx (Toledo WA)

Allis Chalmers CA, 1956, sn CA37320. Electric start, new paint, like new tires, parade tractor, $2700; Dave Zelenka nnn-nnn-nnnn (Perris CA)

Allis Chalmers M, 1934. Restored, hand start, new paint and seat. Parked in Carson City NV, $2500; Frank Velarde nnn-nnn-nnnn (Northridge CA)

Allis Chalmers U, 1936. Restored 15+ years ago, new tires. A $750 value, parked inside, complete, straight sheet metal, everything is free except the engine is stuck, $1500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Allis Chalmers WC, 1940. Looks and runs good, repainted 8 years ago, $700; nnn-nnn-nnnn, phone calls only (Goldendale WA)

Allis Chalmers WD45, 1950, WD45 engine, A-C front loader, extra-large bucket, hydraulics work, very good tires, wide front end, extra hood, new battery; Duane Nelson nnn-nnn-nnnn (NV)

Allis Chalmers WD-45. Older restoration, wide front, recent radiator repair, new water pump, all new gauges, new battery box, rear tires cracked, needs rear tubes, sheet metal and fenders are good, $2195; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Carburetor: DLTX #3 all brass carb for early John Deere D, best offer; Dave nnn-nnn-nnnn (Aurora OR)

Case 1395 recent in-frame overhaul, 13.6x38" tires 4wd, $3000; Wyatt Cal nnn-nnn-nnnn (King City CA)

Case 310 dozer. Canopy and winch in good working order, nice crawler, $4250; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case CC, 1938. Runs good, has good metal, fair tires, hand start, all original, $1500; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case D, 1946. Restored 15+ years ago, last started on Memorial Day 2016, sounded great, parked inside, straight sheet metal, decent tires, $2500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case DO. Straight metal with light surface rust, no rust outs, PTO, remote hydraulics, good cast grille, eagle claw hitch, $450; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case LA with hydraulics, 1941, in good condition, $1,000; Don nnn-nnn-nnnn (Whitehall MT)

Case LI, 1937. Belonged to Drumm Construction, will make great restoration project, with dual rear wheels & a Case L, $750 for both, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case SC, 1945. Restored 15+ years ago, parked inside, wide front end, new front and rear tires, runs great, drove in July 4th parade, $2500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case SC, 1953. Very straight sheet metal, paint oxidized, perfect cast grille, remote hydraulics, eagle claw hitch with equipment down pressure, $850; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case SO, 1947. Restored 15+ years ago, parked inside, started and drove Memorial Day 2016, okay front and rear tires, water pump needs work, $1500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case tractors for parts: Have three: Case VA14, $200; two Case VAO’s, $200 each; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Case tractors for sale: Have three, Case VAI, hasn’t run in a long time; Case VAO, runs, wide front, tires fair, $600; Case WD45AC, runs, narrow front, tires poor, $700; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Case V, 1940s. Restored 15+ years ago, new front tires, stored inside, straight sheet metal, started and drove Memorial Day 2016, $1500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case VAC, 1952, single front, runs good, tires good, $800; Ray Gossett nnn-nnn-nnnn (Hermiston OR)

Case VAO, 1947, with full orchard shielding. Fully restored in 2010 and was the featured tractor in the January/February 2012 Antique Power Magazine. Good runner, good rubber. I've never seen a prettier one, $7,500; Maloy Murdock nnn-nnn-nnnn or xxxx@xxxx.xxx (Merlin OR)

Case VAO, 1954, good field tin, eagle hitch. belt pulley. wide front. Ok rear tires. One-bottom eagle hitch plow. Have not needed to run since last year but I turn engine over once a month. Will need new battery. Good old tractor, $1000 obo; Art Keyes nnn-nnn-nnnn (Toledo WA)

Case wide tread, 1936, on steel with set of rubber tire wheels included, $4900; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 10 parts, $600; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 10 wide gauge. Runs and drives, undercarriage worn. Can email pics, please lv msg, I will call back, $3500; Aaron nnn-nnn-nnnn (Walnut Grove CA)

Caterpillar 10. Not running, not complete, engine not stuck. Can email pics, please lv msg, I will call back, $1000; Aaron nnn-nnn-nnnn (Walnut Grove CA)

Caterpillar D-2 5J series wide gauge tractor. Tractor runs good, has a hydraulic bulldozer blade on it, brand unknown. Undercarriage fair, $2500 obo; Kim Kestler nnn-nnn-nnnn (Reno NV) 

Caterpillar D2 5U, top seat, direct start, runs good, BeGe pump; David Giordano nnn-nnn-nnnn (Oroville CA)

Caterpillar parts: Ensign carbs for Cat 20, 30 all rebuilt, $450; D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar swather and other older farm equipment for sale. Am willing to negotiate on prices; Cindy nnn-nnn-nnnn (Litchfield CA)

Cletrac AD, 1937, fuel pump cleaned and adjusted, new seat, new alternator, starter cleaned and repaired, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1936. New head gasket, brake bands, new seat, fuel pump repaired, ground valves. Starter cleaned and repaired. Isaacson hydraulic bulldozer blade, $2900 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac GG General parts tractor. It has a hood, air cleaner and grille, $350; Jim Chamberlin nnn-nnn-nnnn (Auburn CA)

Cockshutt 40, 1951, with L4 diesel conversion, which Cockshutt used in the late model 40s. 270 CI, 56 pto hp, older restoration with complete engine rebuild. 15.5X38 agri-power rears in good cond. This was my first competition puller in stock class, and a winner. Lot of torque, and power. Downsizing my collection, need to sell this nice 40, $3200 obo; Francis Garceau  nnn-nnn-nnnn (Jefferson OR)

Co-op E-2 tractor, 1952, restored, runs great, 3 pt hitch. A nice tractor. Can email pictures, $2500; Dan Tombrink nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)

Crawler parts: lots of Oliver OC3 and John Deere two-cylinder crawler parts, would like to sell all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Farmall A, culti-vision, overhauled and painted, good tires, $2300; John Wren nnn-nnn-nnnn (Fallon NV)

Farmall A, restore or parts, $500 obo. Good FFA project; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall B, tricycle front, runs, with cultivator bars front and rear; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall Cub for parts, complete sheet metal, $200; Wyatt Cal nnn-nnn-nnnn (King City CA)

Farmall Cub Lo-Boy, 1948, with mounted International 1000 loader, new rear tires with weights, front tires are excellent with weights in hand, rebuilt Quick-Tatch hitch primed and mounted, one bottom plow, homemade 3pt attachment, belt pulley gear box attachment for belt work, new bench style seat, rebuilt mag, new headlights, paint is good, no rust, ditching blade available, loader in excellent shape, protective white paint, everything works, bucket in excellent shape with no dents or bends and with 3 chain hooks, have all manuals plus information on attachments, tractor runs well, photos available, $4500; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

Farmall Cub scrapers, bars, drawbars, disc and mowers, $1500 each; Wyatt Cal nnn-nnn-nnnn (King City CA)

Farmall Cub, 1948, sn 13457. Electric start, new paint, new tires, parade tractor, $2000; Dave Zelenka nnn-nnn-nnnn (Perris CA)

Farmall decals. Complete sets of the correct decals for the Regular, F-20, F-30, F-12/14. Sets start at $58. Partial sets for the W-series, O-series, and I-series. These are commercial grade vinyl decals with a UV protective coating. Pics available by email; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

Farmall F30, 1936, sn FB15428N. Narrow tread, on round spokes front and rear, rebuilt head, no cracks, runs good, $2150; Bob Jaqueth nnn-nnn-nnnn (Careywood ID)

Farmall H belt pulley gear box, excellent condition, $65. Front radiator shutters and controls for H Farmall. Repainted, excellent condition, $80; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall H, 1950, sn 43297, with hydraulic loader. Needs work, $1000 obo. Photos available upon request; Joe Scott nnn-nnn-nnnn (Baker City OR)

Farmall M fenders, $250; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Farmall M tall tractor, gas, has gear-type drop boxes and 20” single front.  Engine free but not running, stored inside. Good sheet metal and usable tires.  Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall MD, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good. Tractor is dirty. Tractor is located in Redcrest, CA, $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall O-12 parts tractor carcass, parts or all of it. Also have a semi-complete O-12 tractor, engine stuck, missing hood and tops of the fenders, $500; Larry nnn-nnn-nnnn (Phelan CA)

Farmall OS4,1948, sn OBHS 19555WI. New tires front and rear, rebuilt carb, runs good, $2150; Bob Jaqueth nnn-nnn-nnnn (Careywood ID)

Farmall parts for Farmall Cub, A, B, C, H and M; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axles. Tractor has aftermarket cultivator frames front and rear, tractor is in Redcrest CA, $2000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall Super C. Single front wheel, not running, not stuck, one rear tire near new, sheet metal fair to good, $600; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Farmall Super H, 1954. Excellent running, restored 3 years ago. McCormick #8, 2-14, rope trip plow, restored. Tractor and plow very good rubber, $2500 for all; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M, 1950s, sn F-10577 DJ. Runs well, fair condition, tires 50%, has weights, $1000; Ed DeVaul nnn-nnn-nnnn (McArthur CA)

Farmall Super M, 1950s, sn F-24685 GJ. In excellent shape, like-new tires, rims & weights, 3pt hitch, live hydraulics, $1800; Ed DeVaul nnn-nnn-nnnn (McArthur CA)

Farmall Super M, have two. One with hydraulic bucket, one with duals, fits on either tractor. Both have 12 volt systems. They run real good. Extra new axles, radiator, brakes and miscellaneous parts worth over $5000. I am asking $5000 for the two and all the extra new and used parts; Albert Lawrence nnn-nnn-nnnn (Kendrick ID) [box ad]

Farmall Super M. Complete tractor or in parts Farmall heavy-duty wide front w/tires and wheel weights. Complete Char Lynn power steering w/hoses, pressure regulator, starter, full time hyd pump, Super M top of battery box, complete seat, four rear wheel weights. Excellent after-market heavy duty 3 point hitch w/twin cylinder lift, complete drawbar. Call for prices obo or trade; Kurt Cordes nnn-nnn-nnnn (Burbank WA)

Ferguson TO-20; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Fiat 805 crawler with blade, for parts, $500; Bill Bartlett nnn-nnn-nnnn (Cotati CA)

Ford 2N parts tractor. What do you need? No rear wheels or tires; George nnn-nnn-nnnn (Albany Oregon)

Ford 6-volt ignition coil for 9N-2N-8N with front mount distributor. New in box. FREE; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Ford 8N, good working condition. Has a factory mounted front-end loader. New radiator. Recently tuned up. Comes with a 5 foot mower, $3000. I will email pictures; Ronald Tooley nnn-nnn-nnnn (Washougal WA)

Ford 8N, restored. Original rubber, newer paint, lights, front bumper, sn 177. Very, very nice, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 900 high crop, very good condition. Engine has been overhauled. Good rubber, paint is good, $4000; La Mar Wolley nnn-nnn-nnnn (Oroville WA)

Ford engines: Ford 9N industrial; Ford 2N; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford late model 8N hulk, engine seized. Rear tires gone, but lots of good useable parts. Name your own price on this one; Kurt Cordes nnn-nnn-nnnn (Burbank WA)

Ford Model T tractor conversion, 1924, rear rims are 4’ high, comes with another complete drivetrain, plus extra starters, water pumps and more, in running order.  Featured in Antique Power magazine Nov-Dec issue of 1998, $5000 obo; Thomas Bastian nnn-nnn-nnnn (Cave Junction OR)

Ford N parts: 9N/2N hood, gas tank, sides, and grille w/horizontal openings, $200. Rear fenders, 1 old and 1 aftermarket, $65 each. 8N steering gear with dash and steering wheel, $125. 9N/2N radiator, untested, $45. 8N rear wheel weights, $200; Todd nnn-nnn-nnnn (Placerville CA)

Ford tractor shop manual, FO-201. Covers Fordson Major diesel. Excellent condition. Produced by I & T Shop Service, $28; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Ford tractors; Ford 8N. Sherman transmission; Ford 8N. Rebuilt, .090 over high dome 4 ring piston, like new rubber; Ford 860; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Fordson F, 1923 with steel wheels, not stuck. Started restoration. Front wheels, axle and radiator completed. Have extra parts. Someone needed to finish this, $650 obo; Ray Bathrick nnn-nnn-nnnn (North Bend OR)

Grader:  Wehr motor grader, 1933 model, Case L power, good 1124-5 duals in good shape, 8.25 20's in front, 12 foot heavy blade, power up and down like Cat 12, $2500; Don nnn-nnn-nnnn (Whitehall MT)

Harris Power Horse A20, 1938. Made in Salt Lake City, UT, $11600; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Harris Power Horse tractor, may be 1953. Tires new or near new, 4-wheel drive, $5400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Hart Parr 12-24, 1930, sn 47726, very good original tractor, last ran September 2016, $6000; Jim Matson nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)

Hart Parr 18-36 in good condition and runs good, made in 1929, $7500; Dell nnn-nnn-nnnn (Buhl ID)

Hart Parr 18-36, 1929, sn 86006, very good original tractor, last ran September 2016, $8000; Jim Matson nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)

Hubs: John Deere B NOS cast iron front hub caps, $40 pair; Buck Evans nnn-nnn-nnnn (Greenville IL)

International 300. Economy modified pulling tractor. Has a Chevy 350 engine modified with pistons, heads, 4-barrel intake and dual exhaust stacks, rear tires cut and near new fronts. Built to Valley Tractor Pullers Association rule specifications, pulls in 4500lb class, has won some and of course lost, but what fun it is to pull with, puts on a good show, $2850; Dick Glover nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

International Cub, 1966, industrial model; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

International Harvester, 1946. Runs strong, front plow and tons of character. Please call for more info; Kevin Van Dort nnn-nnn-nnnn (Kalispell MT)

International I-4, 1948.  Older refurbishment including engine overhaul and new clutch. Paint is oxidized, engine is free and ran well when parked, straight sheet metal, excellent tires front and rear, less than five parade hrs since refurbishment, $1950 obo. Will consider serious offers on either or both, see Massey Harris 44 ad also, lots of enjoyment  for much less than one can be built from scratch; Dick Glover nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

International T6 late model, parts only. Engine (stuck) through final drive sprockets only. Said to have rolled off trailer before the idiot started cutting it up. Saved what I could. Tractor is in Redcrest CA, $1000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

International/Farmall O-12 parts tractors, all or individual pieces; Larry nnn-nnn-nnnn (Phelan CA)

John Deere 1940's era. Have four: John Deere A, sn 547766, in original condition; John Deere H, sn 17014; JD L, sn 640082; JD LA, sn 1795, all three restored; Patty Marsh nnn-nnn-nnnn or Brian Wilson nnn-nnn-nnnn (Centralia WA)

John Deere 2010, diesel, row crop, runs good; David Giordano nnn-nnn-nnnn (Oroville CA)

John Deere 40U, 1953. Has orchard fenders and exhaust, restored and painted in 2006, new tires all around, front weight, new price, $6900; Jim Marchiando nnn-nnn-nnnn (Santa Barbara CA)

John Deere 420 crawler with hydraulic tilt blade, starts and runs with good oil pressure, does not smoke, been sitting for years, needs steering clutch work on one side, needs water pump rebuilt, misc. other work from sitting. 5 roller with good tracks, canopy, very restorable and or fixable and use, $2400; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 420U, 1957, sn 106102. Restored, wide front, 4 speed, PTO, new tires front, 80 to 90% rear, rear wheel weights, 3-pt with correct 3rd link, 4-year-old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork, runs and drives good. With restored 415-A 3-pt integral, 2-14 bottom, plow, new Tyler Buchheit points, extensions and trash boards. Bottoms are soft painted when not in use. Nice original set up, $5500; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

John Deere 520, 1958, original paint, good rubber, 3 pt, 3 sets weights, fenders, 3000+ hours on working tach, $6500 obo; Kent Cooperrider nnn-nnn-nnnn (McCleary WA)

John Deere 60 tractors: one mostly complete, not running, fair tires, $600; second one, poor tires and rims, mostly complete, $400, can email or text pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere 620. Narrow front, newer tires, good condition, $4300; LB Brown nnn-nnn-nnnn (Scio OR)

John Deere 7020, ready to work, dual tires, cab & air, sn T7773R002705R, $10500; Andy Taylor nnn-nnn-nnnn (Scio OR)

John Deere 80. Newer tires, fender extensions, good condition, $7300; LB Brown nnn-nnn-nnnn (Scio OR)

John Deere A, 1942. Engine rebuilt, new rubber, beautifully restored, $3000; Larry Arkfeld nnn-nnn-nnnn (Yreka CA)

John Deere A, 1951, orchard. Running tractor ready for restoration, $2000; Mark Walton nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

John Deere A, styled tricycle, 1945. New rubber, wheel weights 1/0, sandblasted, professional paint job, reconditioned engine, rings, valve job, clutch and pulley assembly, carburetor, generator, starter, radiator, new wiring harness, gauges, new decals and battery, $9000 obo; Bill nnn-nnn-nnnn (Shady Cove OR)

John Deere AO, unstyled. Engine stuck, on rubber for restoration, $1250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B Unstyled made in 1938, older restore, hasn't been started in years, $2700; Dell nnn-nnn-nnnn (Buhl ID) 

John Deere B, 1936. Partially rebuilt. Transmission and radiator completed. F&H rear wheels, one with hub broken. Complete except for gas tank and a few small parts. Includes WICO mag and DLTX10 carb, $1500; Frank Stricklin nnn-nnn-nnnn (Silverdale WA)

John Deere B, 1937. On steel front and rear, $1600; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)

John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1948, beautifully restored, new rubber, electric start, runs great. Ready for show or parade, $3000; Larry Arkfeld nnn-nnn-nnnn (Yreka CA)

John Deere B, 1948. Nice tin, fair tires, complete, engine stuck, $600 obo, can email or text pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere B, 1952. With forks, runs and drives, $2000; Jason nnn-nnn-nnnn (Mulino OR)

John Deere B, unstyled/styled parts: BN pedestal front wheel, $600; round spoke rear wheels, decent condition, $1000 pair; lots of engine and transmission parts, and more, email or text with needs; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere BN, 1946. Electric start, complete, engine turns over, rare slow speed transmission option, fair tin, $800 obo, can email or text pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere BN, styled, mid 1940s. Mostly complete but has had modifications to hood and seat, $500 obo can text or email pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere BO Lindeman crawler, 1945. Rebuilt magneto and carb, starts and runs well, has Lindeman hydraulics and blade but cylinders are shot, has row crop gas tank and is missing right foot rest. Blade is not attached to tractor but comes with it, good running, driving, restorable tractor, $4650 obo; Bob Hunt nnn-nnn-nnnn (Red Bluff CA)

John Deere BW, 1951. Mostly complete, 42” rear wheels, can text or email pics, $1100 obo; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere D Unstyled. New front tires, spoked front wheels, parked inside, complete, straight sheet metal. Restored 15+ years ago, $6000 obo, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

John Deere D, 1935. Complete, not stuck. Comes with brand new fenders & hood, very nice old '35 D, $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1941 styled. Sheet metal very straight, paint is good except oxidized, $3500; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere D, 1942. Rebuilt engine, Beautifully restored, $5000; Larry Arkfeld nnn-nnn-nnnn (Yreka CA)

John Deere D, 1946, styled. Complete but engine stuck, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, Styled, on cut offs, rear tires are good.  Fronts need replaced but hold air, new rings and valves, hand start, restoration started. It ran before starting restoration, stored inside, $2000; Tom Butterfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Joseph OR)

John Deere GP, 1929. Lugs removed, bolted rubber on front and back rims, not running, $3500; LB Brown nnn-nnn-nnnn (Scio OR)

John Deere GP, 1931, orchard, #27 of 225. Very nice running and looking tractor, $18500; Mark Walton nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

John Deere H, $2500; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere H, 1941, good rubber, runs good, $200 obo; Kent Cooperrider nnn-nnn-nnnn (McCleary WA)

John Deere H, 1942. Engine rebuild, new rubber, beautifully restored, $3000; Larry Arkfeld nnn-nnn-nnnn (Yreka CA)

John Deere H, runs good, good tin, just needs paint, sell or possible trade; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere LA, 1946, sn 11414. Electric start, new paint, new tires, parade tractor, $2500; Dave Zelenka nnn-nnn-nnnn (Perris CA)

John Deere LA, very good condition, electric start, call for details, $2500; Paul nnn-nnn-nnnn eves or nnn-nnn-nnnn cell (Vancouver WA)

John Deere left rear fender for 7420 or 7520, may fit others. In very good shape, you haul, $225. Also misc JD parts for 20, 30, & 40 series; Carol nnn-nnn-nnnn (Keno OR)

John Deere M parts: drawbar, $160; final drive both left and right side, $150 each; console, $75; implement drawbar clamps, have three, $110 each; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

John Deere M parts: torque tube, $75; Powr-Trol lift, $160; cast iron front rims 15”, $75 each. Whomever buys parts listed in my two Iron Trader ads month of September gets pallet of misc parts for free; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

John Deere M, 1947, sn 12102. New paint, new tires, very good parade unit, $3600; Dave Zelenka nnn-nnn-nnnn (Perris CA)

John Deere M, 1952. Good condition, period rear tires, $4300; LB Brown nnn-nnn-nnnn (Scio OR)

John Deere M, older restore, look good and runs good, $3200; Dell nnn-nnn-nnnn (Buhl ID)

John Deere MT, with loader (trip bucket), nice, $3500 obo; John Wren nnn-nnn-nnnn (Fallon NV)

John Deere short frame B, 1936. Partially rebuilt. New radiator core, new transmission, no bent shafts or missing teeth. F&H rear wheels; one needs work. Early serial number. 4.25" pistons. Includes carb DLTX10, a WICO mag and most parts. No gas tank, $1500; Frank Stricklin nnn-nnn-nnnn (Silverdale WA)

John Deere tractors: have five, various ages, one location in California.  JD D, 1942, not running, one rear tire shot; JD 40U, 1955, not running, fair rubber, wont roll; JD D, 1948, one rear tire shot, ran when I brought it home; JD D, 1928, has run, some work done, K. Brunner wheels; JD GP, 1929, hasn't run since I owned it, poor rubber, $5000 obo for the lot; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)

Kubota hood: Near new hood for Kubota B2350 and BX1860, $100 each; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 97 Wheatland diesel, 1962. 93hp, 18.4-34 rears, 9.5-24 fronts, front wheel assist, shop built cab, 1 remote, good sheet metal, running condition, $3900 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Ferguson 97 Wheatland diesel, 1963. 93hp, 23.1-26 rears, 9-24 fronts, front wheel assist, no cab, one remote, good sheet metal, not running, $2900 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Harris 101 complete tractor or parts of w/single front tire, complete 123 engine just seized up, 2 good rubber and tread 10/38 tires, 9 bolt pressed wheels w/heavy factory wheel weights. Old Farmhand #12 front in loader mounted on this tractor. Call for prices obo; Kurt Cordes nnn-nnn-nnnn (Burbank WA)

Massey Harris 20. Single front wheel, runs, wrong engine, replacement rear tire needs a tube, no side panels, fenders good, grille good, hood OK, $500; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Massey Harris 30. Narrow front, sheet metal rough, fenders good, rebuilt engine ready to install, has possibly .030 aluminum pistons, replacement rear tire needs a tube, $1000; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Massey Harris 44 chassis powered with a Cadillac 500 coupled to a turbo 400 automatic to the tractor transmission.  Economy modified pulling tractor. Engine has Keith Black pistons, Cad Company valve train, aluminum intake, Holley carb, dual stacks and electric fans, cut rear tires and new fronts. Also complies with Valley Tractor requirements, ROPS set up, a good puller in 6500 lb class that has won its share, $3950. Will consider serious offers on either or both, see International 300 ad also, lots of enjoyment  for much less than one can be built from scratch; Dick Glover nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

Massey Harris 44 diesel, 1953. Restored 15+ years ago, parked inside, started up July 4th and sounded great, new front tires, $2750, pics upon request; Steve nnn-nnn-nnnn xxxx@xxxx.xxx (Fallon NV)

Massey Harris 55 diesel, $2000; Mark Walton nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Massey Harris Senior 101. Parade ready, $2500 obo; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)

McCormick Deering T20 parts crawler, T20 engine parts, fuel tanks, etc., prices vary but will be fair; Larry nnn-nnn-nnnn (Phelan CA)

McCormick W-9, not running, but engine turns over, excellent front and rear tires, excellent sheet metal, a nice straight tractor for restoration. Can email pictures, $700; Dan Tombrink  nnn-nnn-nnnn,  xxxx@xxxx.xxx (Columbia Falls MT)

McCormick WD-9, runs good, big rubber, good puller, painted green.  Tractor is in Redcrest, CA, $2500; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Minneapolis 17-30 cross motor, sn 3396, in good condition, needs hood, has complete fenders, straight with no rust, last ran September 2016, $9000; Jim Matson nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)

Minneapolis Moline 220B-4 long block engine. New, built for military use, $700 obo; Bill nnn-nnn-nnnn (Bellingham WA)

International/Farmall T20 crawler parts, engine block, head, gears, sprockets etc; Larry nnn-nnn-nnnn (Phelan CA)

Minneapolis Moline 445 Universal, 1956. Gas, 38hp, 13.6-38 rears, 16” fronts, no cab, 2 remotes, 3pt, 540 RPM PTO running condition, $3300 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline 445 utility, 1956. Gas, 38hp 14.9-28 rears, 6.50-16 fronts, 3 point, 2 remotes, 540 PTO, good seat, front cross broken. With Minneapolis Moline model S43 hydraulic front loader, 44” bucket, $3200 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline 705 Wheatland Diesel, no cab, 18.4 x 34 rear tires, 540 PTO, power steering, auxiliary hydraulics, good condition, runs excellent, sheet metal is straight except for some minor dents to the lower part of the rear fenders, can email photos, $2950. Call or text Bret nnn-nnn-nnnn or email xxxx@xxxx.xxx (Vancouver WA)

Minneapolis Moline G (gas), clamshell fenders, 16.9 x 30 rear tires, sheet metal in excellent condition, just needs paint. Can email pictures, $1500. Call or text Bret nnn-nnn-nnnn or email xxxx@xxxx.xxx (Vancouver WA)

Minneapolis Moline G1000, 1966. Wheatland diesel, 105hp, 18.4-34 rears, 1100-16 fronts, factory cab with all glass, 4 remotes, ample torque, good sheet metal, duals, $3900 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, 1960. Diesel 68hp, 23.1-34 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes. With 9ft Cancade hydraulic, two-way, front blade, $3200 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline ZAN, 1949. Not running, engine stuck, mostly complete except missing starter and carburetor, hood has typical rust, needs one rear tire, has two rear wheel weights on each side, parts or possible restoration, as is, $400 obo; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Oliver 60 row crop, engine turns over, not running, $350; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Oliver 60 Row Crop. Factory wide front very rare, mounted cultivator mostly complete, good B marked block that needs to be restored, no sheet metal or rear rims, buy whole tractor for $750, that is less that wide fronts bring; Ron Hunter nnn-nnn-nnnn (Puyallup WA)

Oliver 77 row crop with Farm Hand loader and Oliver 720 twine baler. Everything runs and works, would make excellent show stopper with a little sprucing up or you could bale hay cheaply for a few cows, $2500 for the set; Roy Hofer nnn-nnn-nnnn (Canby OR)

Power steering unit for Allis Chalmers D17 with tie rod ends, $100; nnn-nnn-nnnn (Whitehall MT)

Pulley: John Deere A NOS clutch pulley, $300; John Deere A and B flywheel wrenches, $80 each; Buck Evans nnn-nnn-nnnn (Greenville IL)

Rims: 10”, 11”, 28”, 6 lug rims; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Rims: Rear rims, brand new blank rims, 10x38 and 11x38, no lugs or mounting rings, perfect for welding in spoke centers, $100 pair; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Rumely Oil Pull type M 20-35, older restore, in good condition, made in 1926, $22800; Dell nnn-nnn-nnnn (Buhl ID)

Scoopmobile loader. Bucket has been removed and has a crane with extendable boom, 250 Chevrolet engine and powerglide transmission, runs and moves forward, reverse isn’t working, will pick about 4000 lbs, $600 obo; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Tires: Pair of 11.2x24 Bridgestone tires and tubes, 20% tread, no cracks, $150; John Wren nnn-nnn-nnnn (Fallon NV)

Tires: Two 11.2x38 tires mounted on John Deere 9-hole rims, $300; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Tires: Two 13.6x26 tires, on flat spoke rims, 6-hole bolt pattern, $200 each; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: Two 13.6x28 tires, 40% tread, $100 each; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: Two 16.9x28 tires, like new, with tubes; usable, 12x28; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Tractors: I’ve got 7 old tractors I want to sell. Every time I bought one my wife would yell. So let’s make a deal, just you and me, then I can tell her to go climb a tree. Fords 2N, 8N, NAA, Oliver 60 row crop, Farmall Super M, and two Farmall As without engines. All need some work; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)

Twin City HA, sn 21073, restored, clutch sticks, last ran September 2016, $6000; Jim Matson nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)

Various antique tractors between 1930s and 1950s, Allis Chalmers, Case, Farmall, John Deere, McCormick-Deering, Minneapolis-Moline, MM-Twin City. Most restored 15+ years ago and ran when restored, some have recently started and drove, those that ran need battery and fresh and clean fuel, started getting them into running condition, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Wheel weights: Allis Chalmers French-Hecht rear wheel weights for round spoke rear wheels for WC tractor, approx 120 lbs each, $80 pair; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Wheels and tires: Pair front wheels and tires for Oliver, White or other 750X18, 6 hole, $125. Also nice pair 9N front wheels with large bolt pattern, 16”, $40; George nnn-nnn-nnnn (Albany OR)