January 2017 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B with plow made in 1941, older restore looks good and runs good, $2800; Dell nnn-nnn-nnnn (Buhl ID)

Allis Chalmers B, 1941 tractor with starter, not hooked up. Has rare western style fenders. 5 foot mounted belly mower; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Allis Chalmers CA, narrow front, has good tires, no smoke, engine runs very well and drives well. Engine needs front crank seal, and a new ring gear. I have both parts that go with the tractor, $1700 obo. Call or e-mail for pics; Louis Montero nnn-nnn-nnnn or xxxx@xxxx.xxx (Jackson CA)

Allis Chalmers M, 1934. Restored, hand start, new paint and seat. Parked in Carson City NV, $2500; Frank Velarde nnn-nnn-nnnn (Northridge CA)

Allis Chalmers, 1950, WD45 engine, A-C front loader, extra-large bucket, hydraulics work, very good tires, wide front end, extra hood, new battery; Duane Nelson nnn-nnn-nnnn (NV)

Case 310 dozer. Canopy and winch in good working order, nice crawler, $4250; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case L, 1938, on steel, runs, $3500; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)

Case VAC parts. Some engine parts, but no block or head. Water pump. Radiator, steering wheel. Pto assembly, seat assembly, grille, brake parts and other misc items; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Caterpillar D2 5U, hydraulic tool bar blade, snow skids for blade. Steering clutches have been rebuilt. Pony motor has been converted to 12v. Both motors run great. Undercarriage is good. Has rock guards. 7600 hours. Extra filters and a few parts come with it, $3500 obo; Brian Durham nnn-nnn-nnnn or xxxx@xxxx.xxx (Dufur OR)

Caterpillar D2 5U, top seat, long track, solid front idlers, BeGe pump, direct start, runs good, has 200 hours on head, piston, liners, and bearings; David Giordano nnn-nnn-nnnn (Oroville CA)

Caterpillar parts: Ensign carbs for Cat 20, 30 AEL and 60 AAE all rebuilt; D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA) 

Cletrac AD2, 1936, refurbished fuel pump, valves ground. Starter cleaned. Isaacson hydraulic bulldozer blade, $2700 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Complete hand lift for ’48 Farmall Cub, $75 plus shipping; Al nnn-nnn-nnnn (Elko NV)

Crawler parts: Lots of misc Oliver OC3/OC4, Cletrac HG crawler parts, magnetos, starters and carbs, some rebuilt and or been professionally worked on some just cores, also have starter generators, final gears, distributors and misc for John Deere two cylinder crawlers; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Donaldson air cleaner with jar for Farmall H, $25; Al nnn-nnn-nnnn (Elko NV)

Earth Master high crop tractor in nice condition, new tires front and rear, runs and drives well. Sheet metal in near perfect condition, engines does smoke a little. Perfect for restoration as they are rare. It is complete except light that faces the rear is gone, $1800. Call or email for pictures; Louis Montero nnn-nnn-nnnn or xxxx@xxxx.xxx (Jackson CA)

Earthmaster tractor, has full weights, good tin. For parts or rebuilding. Missing steering column and dash, $350; Al nnn-nnn-nnnn (Klamath Falls OR)

Farmall A, restore or parts, $500 obo. Good FFA project; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall belt pulleys: Pulleys for H, M, all the way up to 650. Can be delivered to Grants Pass or Medford area as well as Redding CA, $100 each; Roger nnn-nnn-nnnn no Saturday calls (Redding CA)

Farmall BN, 1944, all original, not hacked up. Has with it new seat, steering wheel, tune-up kit, wires, and decals, $2100; Al nnn-nnn-nnnn (Klamath Falls OR)

Farmall BN, with cultivator bars; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall C, 1947, new paint, good tires, runs good, narrow front, shop-built 3-point. Includes loader that needs new lift cylinders and a 6' side mount mower. Can deliver, $1250; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Farmall Cub wheel weights, front and rear, $200; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall Cub, with cultivator bars; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall Decals. Complete sets of the correct decals for the Regular, F-20, F-30, F-12/14. Partial sets for the W-series, O-series, and I-series. These are commercial grade vinyl decals with a UV protective coating. Sets start at $58. Pics available by email; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

Farmall F30, 1935, on steel, good condition, will run, $3500; Larry nnn-nnn-nnnn (Phelan CA)

Farmall F30, narrow tread, 1936, sn FB15428N on round spokes front & rear, rebuilt head, no cracks, runs good, $2150; Bob Jaqueth nnn-nnn-nnnn (Careywood ID)

Farmall H belt pulley gear box, excellent condition, $65. Front radiator shutters and controls for H Farmall. Repainted, excellent condition, $80; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall H, 1944, rare, with a M.W. hand clutch. Used pulling planes at Hurlong Military Base. It is as new as you will ever find, $3500; Al nnn-nnn-nnnn (Klamath Falls OR)

Farmall H, narrow front single rib front tires, rear tires are in great condition but not matched. Engine starts and runs great, electrical system has been converted to 12 volt and has original lights. Hydraulic system works good. This tractor just came off a working ranch; you would be the second owner. It is ready for work in original condition or, with a paint job, enter in a parade. Don't miss this one, $1500; Daniel M. Thompson nnn-nnn-nnnn or xxxx@xxxx.xxx (Winnemucca NV)

Farmall H, runs, with cultivator bars, fair tires; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall M tall tractor, gas, has gear-type drop boxes and 20” single front.  Engine free but not running, stored inside. Good sheet metal and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall M, 1946, with an F11 Hi-lift Loader. Runs good, $3500; Al nnn-nnn-nnnn (Klamath Falls OR)

Farmall MD, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good. Tractor is dirty. Tractor is located in Redcrest, CA, $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall MD, sn FDBK-149707, 1960, with loader. Good condition. $5500 with loader, $5000 w/o loader; Betty Campbell nnn-nnn-nnnn (Cottonwood ID)

Farmall parts for Farmall Cub, A, B, C, H and M; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall parts: Assorted wheels, A and B fenders, tanks, dash, hood, etc., call for prices; Farmall wheels 355439R1/6325PE with good splines, $100 each; Roger nnn-nnn-nnnn no Saturday calls (Redding CA)

Farmall Regular, 1935, original, not hacked up. Wearing cutoff wheels. Has with it original new rice lug wheels and spoke fronts, $2200; Al nnn-nnn-nnnn (Klamath Falls OR)

Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axles. Tractor has aftermarket cultivator frames front and rear, tractor is in Redcrest CA, $2000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Fiat Allis FL10 crawler loader. Engine is removed, the bucket and boom have been removed to redo engine. Good undercarriage. All parts included, $1500 loaded on your trailer. Email or call for pictures/info, may trade for AC tractors or parts; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Ford 851 Power Master, 2 WD diesel farm tractor, old round Ford lines, rare diesel engine, power steering, 3pt, good rubber, used a lot around farm, dents rust oily and smoke, not a perfect 10, maybe a 5, vertical shift 5 speed manual transmission, $1950 obo; Klein Tractor nnn-nnn-nnnn or xxxx@xxxx.xxx (Rainier OR)

Ford 8N, restored. Original rubber, newer paint, lights, front bumper, sn 177. Very, very nice, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 9N, 1940, original, not hacked. Flat top radiator and smooth axels. Older registration. Use it or show it, $3200; Al nnn-nnn-nnnn (Klamath Falls OR)

Ford 9N, a little rough but runs & drives. Has good rubber, $1000 obo; Phil nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgefield WA)

Ford N parts: one pair non-script fenders with hardware, $125. One pair 8N running boards with hardware, excellent condition, $100. Fuel tank, no sign of leaks, $50. Two pairs 19” wheels with tires, $75 per pair. 8N generator, saddle mount, $75. Two 8N starters with drives, $75. Also have many small items. Prices listed without shipping. Make an offer on the entire package; Lee nnn-nnn-nnnn (Crawfordsville OR)

Ford tractor shop manual, FO-201. Covers Fordson Major diesel. Excellent condition. Produced by I & T Shop Service, $28; Wendell Newman nnn-nnn-nnnn (Carson City NV)

International 574 diesel, good running tractor, straight sheet metal, paint is faded. The rear tires 50%, front tires 90%. Everything works, $3200; Mike Cristler nnn-nnn-nnnn or xxxx@xxxx.xxx (Zamora CA)

International T6 crawler, 1950, with orchard fenders, very nice undercarriage, runs and steers great, new Hahn seat, $3500; Larry nnn-nnn-nnnn (Phelan CA)

International 350 utility diesel tractor with loader, rebuilt injector pump, rebuilt starter, 2 new front tires. Right rear very good, left rear holding air. Runs very well, loader works good, $1500; Dennis Gullick nnn-nnn-nnnn (Redwood Valley CA)

International ID 9. Runs very well, tires all have good tread but are old and weathered. All hold air. Some levers are stuck, paint is bad. Has a couple of leaks, one fuel and one oil, $1800; Dennis Gullick nnn-nnn-nnnn (Redwood Valley CA)

International T-20. Does not run. Has a hole in the block. Pretty much complete, no hood for engine. Undercarriage usable, lots of good parts. Will load on your trailer. Email/call for pictures $200; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

International T6 crawler, 1950 with orchard fenders. Runs and drives great, very, very nice undercarriage. New Hahn seat, $3500; Larry nnn-nnn-nnnn (Phelan CA)

International T6 late model, parts only. Engine (stuck) through final drive sprockets only. Said to have rolled off trailer before the idiot started cutting it up. Saved what I could. Tractor is in Redcrest CA, $1000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

International Trojan motor grader, 1947. Built for the US Navy. Completely sand blasted and refinished. Has been shown at Salem State Fair, Brooks Steam-Up and the Agriculture Exposition at Portland Expo., $6500; Russ Shorten nnn-nnn-nnnn (Dayton WA)

International W-12, 1936, complete, no cracks, will run, $2500; Larry nnn-nnn-nnnn (Phelan CA)

International W6, original rust, will run, $2200; Larry nnn-nnn-nnnn (Phelan CA)

John Deere 2010, tricycle row crop, diesel, runs excellent; David Giordano nnn-nnn-nnnn (Oroville CA)

John Deere 4010 diesel with cab. Last spring wind blew stack cover up & was stuck before I caught it. As is $3800; Al nnn-nnn-nnnn (Klamath Falls OR)

John Deere 4010 diesel with loader, big horsepower, solid machine, functioning farm tractor, dents and oil leaks, 24 volt, no longer needed, $7000; Klein Tractor nnn-nnn-nnnn (Rainier OR)

John Deere 420 W, late model, with 3 pt hitch, good rear tires. Front hold air, rebuilt cylinder head, sheet metal in good shape grille has minor dings in it but in over all good shape. Tractor runs well and drives, has some gear noise, $1850; Louis Montero nnn-nnn-nnnn (Jackson CA)

John Deere 50, 1953, original paint, 3 pt, good rubber, one set rear weights, $3500, or with fenders, $4000; Kent Cooperrider nnn-nnn-nnnn (McCleary WA)

John Deere 720 diesel parts tractor, mostly there, $1000; Pat Ridders nnn-nnn-nnnn (Albany OR)

John Deere AO, unstyled. Engine stuck, on rubber for restoration, $1250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere AR on steel, very early, sn 250442, complete, good condition, engine is stuck, $1900; Larry nnn-nnn-nnnn (Phelan CA)

John Deere AR, 1937. A nice older restoration. New rear tires. Good running tractor, $4500 obo; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere AW and BW wide front ends, complete with or without pedestal. Both anteater and round tube styles. Email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, has BWH front end with one long extension and two short extensions, not running, $2400. Email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere belt pulley for 40-420-430, $350; Dave Itel nnn-nnn-nnnn (Aurora OR)

John Deere D, 1935. Complete, not stuck. Comes with brand new fenders & hood, very nice old '35 D, $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1946, styled. Complete but engine stuck, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere fender, left rear for 7420 or 7520, may fit others, in very good shape, $225; Carol Gay nnn-nnn-nnnn (Keno OR)

John Deere H, hand start with cultivator; J. Keith nnn-nnn-nnnn (Hermiston OR)

John Deere hydraulic pump, bolts to governor, $75; Dave Itel nnn-nnn-nnnn (Aurora OR)

John Deere LA, 1942 sn 5817. Tag is still attached. Runs and drives! Hand crank or electric start. Comes with following attachments: 5' sickle bar mower with an additional 6' bar, 5' spring tooth harrow with additional stainless steel cultivators, and 14" single bottom plow. Also have the original owner's manual and parts manual. The metal is straight with no major rust. Can send pictures on request. Delivery available, $3500; Doran Chapman nnn-nnn-nnnn or xxxx@xxxx.xxx (Donald OR)

John Deere M, 1948, runs good with good sheet metal and tires, older restoration, $2600. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere M, older restore, looks good and runs good, $3200; Dell nnn-nnn-nnnn (Buhl ID)

John Deere MC with Yakima blade wide gauge tracks, runs and drive well, good sheet metal except for the grille is missing. I’m currently putting in new clutch and frictions in the left side; will be done before ad comes out, $4000 obo. Call or email for pictures; Louis Montero nnn-nnn-nnnn or xxxx@xxxx.xxx (Jackson CA)

John Deere MI, 1951. Very good running nice tractor. New tires and tubes, new clutch, throw out bearing, rear main seal, and new radiator. Nice sheet metal. Comes with many extra parts. In need of cosmetic restoration and or use as is, $3200 obo; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere operator manuals, originals from the 1950’s two-cylinder tractors, $30 each. I have about 30; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Kubota B6100 and 7100 creeper transmission adapter bolt on $75 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota hood: Near new hood for Kubota B2350 and BX1860, $100 each; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L295 engine rebuilt complete $2750 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L3650 FWD, starts and runs well, 7500 hours, with good rubber, missing one side panel, make offer; Mike Cristler nnn-nnn-nnnn or xxxx@xxxx.xxx (Zamora CA)

Massey Ferguson 35 deluxe diesel with a loader, caught in a grass fire, $750 tractor, $500 loader, $1000 complete; Klein Tractor nnn-nnn-nnnn or xxxx@xxxx.xxx (Rainier OR)

Massey-Harris 44 Diesel Special.  New sleeves and pistons for rebuilding.  Repair manual included; Duane Qualey nnn-nnn-nnnn or xxxx@xxxx.xxx (McMinnville OR)

McCormick Deering 10-20, 1928, on steel, runs, $2500; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)

McCormick Deering 22-36, 1931, original rust, runs very good, $2300; Larry nnn-nnn-nnnn (Phelan CA)

McCormick Farmall Model H. I believe it's a 1952. Works good. Engine has very few hours since being rebuilt, $1,500; Albert Olson nnn-nnn-nnnn or xxxx@xxxx.xxx (Dufur OR)

McCormick WD9, 1954, paint, wiring 3 years old, new tires 2 years old. Runs great & looks good, stored inside, $4900 obo; John nnn-nnn-nnnn (Mesa AZ)

Misc tractors: Minneapolis Moline G, 1950, have run good project, $250. 1953 IHC SW6 good tin/tires but needs hood & rebuild, $250. Case DC4, 1950, nice original, shedded for most of its life, also good rubber, $1150 to a good home. Case VAC, 1946. Most work done, has 3pt, needs tires & grille, $750. 1953? MM BF parts with hyd's+ mower, $225. Will be selling some parts soon from 1950 MM UTS-38"hubs+1 good rim/.020 oversize pistons/ air cleaner/ a cyl. block/misc. other parts. All located in BC 1 hour from Eureka MT 59917. Can email photos. May do trades +/- for flywheel engines or early tractors any condition, also parts for my other tractors, maybe steam engines, flat belt equipment or machine tools; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)

Oliver OC46 3/4 yard crawler front end motor. Recent major repairs, new paint, very good undercarriage, ideal for snow removal, $3500; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Rumely Oil Pull M 20-35, older restore, in good condition, made in 1926, $22800; Dell nnn-nnn-nnnn (Buhl ID)

Tire tube: brand new 11.2-36 tractor tube. Never used. Purchase a year ago, $30 plus shipping costs; Tim Morris nnn-nnn-nnnn (Napa CA)

Tires: Two matched 12.4 x 28 tires on Case VAC rims. Good rubber. Portland area delivery possibly available, $200; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Tires: Two 12.4/11 x 36 on 11" rims welded to Oliver 9-hole centers. Tires hold air for an extended time. Minimal tread, $100/pair; nnn-nnn-nnnn or xxxx@xxxx.xxx  (Hillsboro OR)