January 2017 - Engines & Parts For Sale

All Classified Ads

Cart: nice and original unpainted electric wheel cart for 2 hp to 3 hp engines. Ready to use, $400; John Billing nnn-nnn-nnnn (Edgewood WA)

Clutch pulley for a 1-3/4" crankshaft. Crank shaft hole goes all the way through. I believe the brand is an Edgemont, $500; John Billing nnn-nnn-nnnn (Edgewood WA)

Cushman 4 hp binder engine, with hand clutch, photos available, $400; Leonard nnn-nnn-nnnn (Santa Rosa CA)

Cushman carburetors: Two Schebler carbs for 4hp Cushman, one needs TLC, the other looks very nice, photos available, $125 for both; Leonard nnn-nnn-nnnn (Santa Rosa CA)

Cushman Cub with Wico mag, $300. International LB, $250. Fairbanks ZD, $200. Drag saw engine with Wico mag and Lunkenheimer carb, $300. Freemont engine, $100. Small generator, $150. Maytag single cyl., $150. Sattley air cooled, $125 or all eight for $1000; Bob Adams nnn-nnn-nnnn or xxxx@xxxx.xxx (Fresno CA)

Economy 2-1/2 hp E, good project, turns free, missing parts, $175; Dave Itel nnn-nnn-nnnn (Aurora OR)

Ellis 3-6 hp engine parts. Have a cylinder/rod/gov.parts/side cover, more, some good, some poor. Can email photos, asking $130 USD or trades; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)

Engine collection: Due to old age and health problems I am selling my 25 year collection of engines. I am selling them as a package, priced accordingly. There are 20 engines in my collection at this time ranging from 1-1/2 hp to 6 hp. Seventeen of these engines are running or have run. One is a barn fresh Economy, One is a 3? hp Gray marine, and the 3rd one is a 1-1/2 hp Fairbanks Morse 1A that was fully restored as a show piece so I never ran it; Bob Johnson nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Cedarville CA)

Fairbanks 2 hp H on iron-wheeled wagon. Embossed 'Fairbanks-Morse' lettering on the hopper. Complete, running engine, restored. Great little runner, $1500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA) 

Fairbanks 6 hp Z with mag and crank. Mag is hot, engine is stuck but shouldn’t take much to free up. Comes with Fairbanks buzz saw parts, $275; Dave Itel nnn-nnn-nnnn (Aurora OR)

Fairbanks Morse 1-1/2 hp headless, on iron wheeled wagon. Good runner, $550; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fairbanks Morse 1-1/2 to 2 hp Z Style D, photos available, $250; Leonard nnn-nnn-nnnn (Santa Rosa CA)

Fairbanks Morse 2 hp Z, solid flywheels, metal base, photos available, $300; Leonard nnn-nnn-nnnn (Santa Rosa CA)

Fairbanks Morse 20 hp Z tank cooled engine on iron wheel cart. Completely restored and painted. Running. Has been shown at several shows. Few of the 20 hp are still around, $8000; Wilbur Reil 530 756 1018 (Davis CA)

Fairmont engine used in the railroads in years gone by, turns over, looks to be in good shape, steel spoked flywheels and has radiator, $400, also have a little hand carry 6 volt generator powered by gas engine from Montgomery wards, turns over and looks to be in very good shape, $100; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Fuller & Johnson 1-1/2 hp vertical pump jack, in good condition, $500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Fuller Johnson 4 hp, excellent runner on a cart, $1200; Ron nnn-nnn-nnnn (lv msg) or nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)

Galloway 2-1/4 hp engine, with rebuilt Webster Tri-polar, plus hand crank, on skids, photos available, $650; Leonard nnn-nnn-nnnn (Santa Rosa CA)

Gas Engine Construction book (1902). Build your own 1/2 hp gas engine. 300 pages, $20 pp; Gustafson nnn-nnn-nnnn (Auburn CA)

Hercules IXB5 engine with clutch and starter, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Ideal air-cooled engine, $600; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

International 2 hp vertical,1904, very early sn K-2651. Very good shape, no welds. Name plate reads "IHC Vertical Patents pending", $2500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

International 2-1/2 hp Famous, sn GA-2416, 1911. Good condition on running gear, $2500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

International Harvester engine 135. Has clutch, $500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

John Deere 1-1/2 hp E, war model, not complete, rusty, $100; Dave Itel nnn-nnn-nnnn (Aurora OR)

Maytag Multi Motor (vertical) restored, $400; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Maytag twin cylinder, needs cleaning and paint job, should start right up, photos available, $150; Leonard nnn-nnn-nnnn (Santa Rosa CA)

New Way 2-1/2 hp vertical, sn 1956. Good shape, needs restored. Have new fan shroud in box, $900; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Peerless 2 hp vertical (Bates and Edmunds) on iron-wheeled wagon. Runner, $4500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA) 

Several engines to sell: Ideal model R, 12" flywheels, has very good compression, rebuilt Wico EK, Lunkenheimer carb, original fan, older restoration, $750 obo. 1-3/4 hp International Mogul on nice cart, old restoration, runs good, but has a freeze crack that doesn't leak on the bottom of the cylinder, $1000. Early Ottawa 3-4 hp Dual Fuel, needs some work, 95% complete $900 obo. 2-1/2 hp Alamo project engine. Everything was bead blasted and painted, rebuilt Webster mag and bracket, just needs shims and re-assembly, $800. Have other engines I may sell as well, just ask or call. Can send pictures of all the engines. Can ship via Fastenal; Craig nnn-nnn-nnnn (Northridge CA)

Stover 1-1/2 hp K, 1921, sn K141403. Runs very slow, spoked flywheels, open crankcase, grease cup, rod bearing, oil hole main bearings, new gas tank, rebuilt Webster Tri-polar magneto, on 4 wheel cart. Runs good, $900; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)

Stover 2 hp w/Wico, runs, on cart, $400; Ron nnn-nnn-nnnn (lv msg) or nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)

Unknown make 1-1/2 hp unknown name, hot head runs, battery and coil, on cart, $300; Ron nnn-nnn-nnnn (lv msg) or nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)

Wisconsin V-4 engine off of hay baler with clutch and starter, $500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Wisconsin AKN. Looks as new, mag rebuilt, etc, $125; Gustafson (new phone #) nnn-nnn-nnnn (Auburn CA)

Witte 2 hp. Bosch mag, runs, on cart, $400; Ron nnn-nnn-nnnn (lv msg) or nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)

Wonder 2 hp by Construction Machinery Co,, hot head, runs, battery & coil, on cart, $300; Ron nnn-nnn-nnnn (lv msg) or nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)