February 2017 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers CA, narrow front, has good tires, no smoke, engine runs very well and drives well. Engine needs front crank seal, and a new ring gear. I have both parts that go with the tractor, $1700 obo. Call or e-mail for pics; Louis Montero nnn-nnn-nnnn or xxxx@xxxx.xxx (Jackson CA)

Allis Chalmers gas tractors used OEM parts: Seat, very good condition, $175. Gas tank, VGC, $175. Radiator, good condition, $200. Radiator shroud, $150. Starter, good condition, $150. Half hood, exhaust side, $100; Iver nnn-nnn-nnnn (Vancouver WA)

Allis Chalmers, 1950, WD45 engine, A-C front loader, extra-large bucket, hydraulics work, very good tires, wide front end, extra hood, new battery; Duane Nelson nnn-nnn-nnnn (NV)

Bolens Iseki diesel tractor, 4 wheel drive, 2 cylinder, has front loader and back blade, runs and operates really good, great tires, $3000; Ray Gardner nnn-nnn-nnnn (Bandon OR)

Carburetor for Allis Chalmers G tractor, $100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Carburetors, 3 old: Rayfield, all brass, Model L2, 1 1/4 venturi, patented 2/20/1911. Kingston, brass carburetor with steel bowl, Model L3, 1 3/16 venturi, patented 3/9/1915. Zenith Model T4X, 1 5/32 venturi, patented 2/29/1908; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Case C, parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F & H hc245 rear round spoke wheels, 9x24, very nice and rare, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case DC-4 with heart-shaped front end, hand clutch, live pto, hyd and eagle hitch. Runs, need some tinkering, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case VAH 1948. Very restorable high crop. Case only built 2016 of this model. Very straight sheet metal, engine stuck comes with extra block. Rear tires hold air. Call for more details and pictures. $2200 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Caterpillar D2 5U, top seat, long track, solid front idlers, BeGe pump, direct start, runs good, has 200 hours on head, piston, liners, and bearings; David Giordano nnn-nnn-nnnn (Oroville CA)

Caterpillar D4C and D6C pony engine, complete, excellent condition, $600; Buck nnn-nnn-nnnn (Greenville IL)

Caterpillar parts: Ensign carbs for Cat 20, 30 AEL and 60 AAE all rebuilt, $300 each. D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA) 

Cletrac AD2, 1936, refurbished fuel pump, valves ground. Starter cleaned. Isaacson hydraulic bulldozer blade, $2700 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cockshutt 30 parts and engines, or complete tractor for parts or to restore. Also some Cockshutt model 40 & 50 parts. Too many to mention, call for price and availability; Francis Garceau nnn-nnn-nnnn (Jefferson OR)

Complete hand lift for ’48 Farmall Cub, $75 plus shipping; Al nnn-nnn-nnnn (Elko NV)

Cylinder head for International 6 cylinder 236 cubic inch diesel engine from 460 Farmall; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Earth Master high crop tractor in nice condition, new tires front and rear, runs and drives well. Sheet metal in near perfect condition, engines does smoke a little. Perfect for restoration as they are rare. It is complete except light that faces the rear is gone, $1800. Call or email for pictures; Louis Montero nnn-nnn-nnnn or xxxx@xxxx.xxx (Jackson CA)

Farmall A, restore or parts, $500 obo. Good FFA project; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall belt pulleys: Pulleys for H, M, all the way up to 650. Can be delivered to Grants Pass or Medford area as well as Redding CA, $100 each; Roger nnn-nnn-nnnn (changed number) no Saturday calls (Redding CA)

Farmall BN, with cultivator bars; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall C, 1949. Very nice original unrestored tractor. Good rubber and sheet metal. Converted to 12 volts, $1500 firm; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

Farmall Cub wheel weights, front and rear, $200; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall Cub, with cultivator bars; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall F30, 1935, on steel, good condition, will run, $3500; Larry nnn-nnn-nnnn (Phelan CA)

Farmall H belt pulley gear box, excellent condition, $65. Front radiator shutters and controls for H Farmall. Repainted, excellent condition, $80; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall H Donaldson air cleaner with jar, original, $25; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall H, narrow front single rib front tires, rear tires are in great condition but not matched. Engine starts and runs great, electrical system has been converted to 12 volt and has original lights. Hydraulic system works good. This tractor just came off a working ranch; you would be the second owner. It is ready for work in original condition or, with a paint job, enter in a parade. Don't miss this one, $1500; Daniel M. Thompson nnn-nnn-nnnn or xxxx@xxxx.xxx (Winnemucca NV)

Farmall H, runs, with cultivator bars, fair tires; David Giordano nnn-nnn-nnnn (Oroville CA)

Farmall M, tall tractor, gas, has gear type drop boxes and 20” single front. Aftermarket wide front will also be available. Engine free but not running, stored inside. Good sheet metal and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall MD, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good. Tractor is dirty. Tractor is located in Redcrest, CA, $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall parts for Farmall Cub, A, B, C, H and M; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall parts: Assorted wheels, A and B fenders, tanks, dash, hood, etc., call for prices; Farmall wheels 355439R1/6325PE with good splines, $100 each; Roger nnn-nnn-nnnn (changed number) no Saturday calls (Redding CA)

Farmall sheet metal from A to 450 plus misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axles. Tractor has aftermarket cultivator frames front and rear, tractor is in Redcrest CA, $2000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall Super M motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Ferguson Magneto for high-tension magneto with built-in governor. Type MG24, $200. Also Fordson radiator cap with nob, $50; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 851 Power Master, 2 WD diesel farm tractor, old round Ford lines, rare diesel engine, power steering, 3pt, good rubber, used a lot around farm, dents rust oily and smoke, not a perfect 10, maybe a 5, vertical shift 5 speed manual transmission, $1950 obo; Klein Tractor nnn-nnn-nnnn or xxxx@xxxx.xxx (Rainier OR)

Ford 8N tractors: have 3. One rebuilt, tires like new, new clutch, new pressure plate, throw out bearings, main & rod bearings, new water pump, new fender and hood metal. The rebuilt engine has .090 over 4-ring high dome power pistons. This tractor has the extended 1947 steering wheel column,1946 gear shifter. It has a 1950's governor (rebuilt) with 1/4" aluminum shield for the proof meter mounted to the original dash housing. Repainted Ford grey. Rebuilt 3 point hydraulic system. When someone buys such a tractor, then changes the engine oil and filter, also the gear hydraulic oil at least once a year, this tractor should last another 50 years! Invested $6000, will sell for $4500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford tractor shop manual, FO-201. Covers Fordson Major diesel. Excellent condition. Produced by I & T Shop Service, $28; Wendell Newman nnn-nnn-nnnn (Carson City NV)

International T6 crawler, 1950, with orchard fenders, very nice undercarriage, runs and steers great, new Hahn seat, $3500; Larry nnn-nnn-nnnn (Phelan CA)

International 350 Hi-Utility fast hitch 1 remote runs needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 460 Utility tractor with 282 cu/in diesel engine, $1800 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International 460 Utility tractor with 301 cu/in diesel truck engine, $1800 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International 574 diesel, good running tractor, straight sheet metal, paint is faded. The rear tires 50%, front tires 90%. Everything works, $3200; Mike Cristler nnn-nnn-nnnn or xxxx@xxxx.xxx (Zamora CA)

International T6 late model, parts only. Engine (stuck) through final drive sprockets only. Said to have rolled off trailer before the idiot started cutting it up. Saved what I could. Tractor is in Redcrest CA, $1000 obo; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

International Trojan motor grader, 1947. Built for the US Navy. Completely sand blasted and refinished. Has been shown at Salem State Fair, Brooks Steam-Up and the Agriculture Exposition at Portland Expo., $6500; Russ Shorten nnn-nnn-nnnn (Dayton WA)

International W-12, 1936, complete, no cracks, will run, $2500; Larry nnn-nnn-nnnn (Phelan CA)

John Deere 2010, tricycle row crop, diesel, runs excellent; David Giordano nnn-nnn-nnnn (Oroville CA)

John Deere 30" cast centers for rack and pinion axles, fits 50 to 730 and newer, part # F1590R, $50 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 4010 diesel with loader, big horsepower, solid machine, functioning farm tractor, dents and oil leaks, 24 volt, no longer needed, $7000; Klein Tractor nnn-nnn-nnnn (Rainier OR)

John Deere 420 C Bulldozer 5 roller with reverser, very good undercarriage. Runs good, steers good, $4250; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420 W, late model, with 3 pt hitch, good rear tires. Front hold air, rebuilt cylinder head, sheet metal in good shape grille has minor dings in it but in over all good shape. Tractor runs well and drives, has some gear noise, $1850; Louis Montero nnn-nnn-nnnn (Jackson CA)

John Deere 530, looks good, $4700 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 620 LP Black Dash, runs, on 42" rubber with 16" single front with 3pt, no top link Airstack new battery box, cables and seat cushions, or John Deere 720 gas Black Dash turns over on 42"rubber with 16"single front with 3pt no top link dual hydraulics Airstack, $2750 each or $5000 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 70 diesel standard, adjustable front end, runs and drives, good sheet metal, air stack, power steering. Tires 50%, lots of cracks, pony has a bad rod, $2750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere AR, 1937. Older restoration, nice running tractor with new rear tires. Good paint and sheet metal. Used at many local events and parades, $3800 obo; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1951, with John Deere No.5 hydraulic 7' sickle mower. Has electric start, lights, live hydraulics, Roll-o-matic front end, all new tires. Engine has had recent valve job. Tractor repainted a few years ago and used very little since. Nice sheet metal and always stored inside. Starts easy and runs very well, $3250 or offer. No trades; Ken nnn-nnn-nnnn (Eugene OR)

John Deere D, 1927, with steel wheels, been sitting for a few years without running, motor will turn over but stiff, has extra wide steel rear wheels, nice brass tag, sn 51709. Tractor is complete and in quite good shape and very restorable, $2700; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere D, 1946, styled. Complete but engine stuck, $1675; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere H 1945, with a 4-row cultivator, hand start, runs good; J. Keith nnn-nnn-nnnn (Hermiston OR)

John Deere MC with Yakima blade wide gauge tracks, runs and drive well, good sheet metal except for the grille is missing. I’m currently putting in new clutch and frictions in the left side; will be done before ad comes out, $4000 obo. Call or email for pictures; Louis Montero nnn-nnn-nnnn or xxxx@xxxx.xxx (Jackson CA)

John Deere MC, 1949, sn 10007. Seventh MC off production line built in Yakima WA. Tool bar made by John Deere Yakima Works of Deere and Company. Has flat pulley and splined pto. Tractor is unrestored and all original. Tractor has been stored inside and runs and steers beautifully, $5000; Richard Blodgett nnn-nnn-nnnn or xxxx@xxxx.xxx (Citrus Heights CA)

John Deere MI, 1951. Very nice running tractor. New clutch, radiator, hoses and all 4 tires replaced. Nice little rare tractor, $2650; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere operator manuals, originals from the 1950’s two-cylinder tractors, $30 each. I have about 30; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

John Deere parts for late model B Roll-O-matic, $100. Two radiators, $75 ea. Two sets of long rear axles, $150 each set; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

John Deere tractors: John Deere A, 1945. John Deere A, 1948. John Deere A, 1952. John Deere BN, 1947. John Deere BNH, 1945. John Deere BO, 1937, on steel. John Deere BR, 1936, on steel. John Deere R, 1951. All of these tractor will start and run, some need work; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

Kubota B6100 and 7100 creeper transmission adapter bolt on $75 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota hood: Near new hood for Kubota B2350 and BX1860, $100 each; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L295 engine rebuilt complete $2750 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L3650 FWD, starts and runs well, 7500 hours, with good rubber, missing one side panel, make offer; Mike Cristler nnn-nnn-nnnn or xxxx@xxxx.xxx (Zamora CA)

Massey Ferguson 35 deluxe diesel with a loader, caught in a grass fire, $750 tractor, $500 loader, $1000 complete; Klein Tractor nnn-nnn-nnnn or xxxx@xxxx.xxx (Rainier OR)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 81 tricycle. All original tires, paint, lights. Runs, need rewired, $1300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey-Harris 44 Diesel Special.  New sleeves and pistons for rebuilding.  Repair manual included; Duane Qualey nnn-nnn-nnnn or xxxx@xxxx.xxx (McMinnville OR)

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4 parting out: orchard belt pulley, shutters, plus misc parts.; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4, runs, missing orchard sheet metal, $1000. McCormick Deering O-4, very early motor stuck, missing orchard sheet metal, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel, engine free, and 1 parts tractors. Both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Farmall Model H. I believe it's a 1952. Works good. Engine has very few hours since being rebuilt, $1,500; Albert Olson nnn-nnn-nnnn or xxxx@xxxx.xxx (Dufur OR)

Minneapolis Moline UTS, 1940, kit tractor (disassembled), have all the parts, cylinder head OK, it has been Magnafluxed + valves were ground, block has been bored and sleeved, $650 obo; Gil Stuart nnn-nnn-nnnn or xxxx@xxxx.xxx (Moreno Valley CA)

Oliver 60 row crop, engine turns over, $325; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Oliver 990 GM diesel 1960 twin stick pto and hyd motor stuck, needs radiator, $6500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver OC46 3/4 yard crawler front end motor. Recent major repairs, new paint, very good undercarriage, ideal for snow removal, $3500; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Oliver-Cletrac dozer, 6 cyl. flathead engine. Very good undercarriage, $2175; Don Chappell nnn-nnn-nnnn (St Helens OR)

Parting out several John Deere A's and B's. Call or email with your needs; Chris nnn-nnn-nnnn (Camano Island WA)

Parting out: Massey 65 gas. Deutz 4005. Oliver 77. Allis Chalmers K-35. Minneapolis Moline M5 diesel. Caterpillar 10. Caterpillar 20 parts; Buck nnn-nnn-nnnn (Greenville IL)

Power Horse, Model A20, 1938. Made in Salt Lake City, UT. $9990; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)