February 2017 - Vehicles

All Classified Ads

1908 Kelly truck, K-13, chain drive; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

191? Garford truck, hard rubber, engine rebuilt; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

191? Republic truck, hard rubber, engine turns; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

1918 White truck, model 20, runs, hard rubber; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

1920 AB Mack engine & transmission; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

1923 Model T Ford Roadster completely restored both mechanically and cosmetically. On a scale of 1-10, it is probably a "9". $17500 obo. Let’s talk. You won't find a nicer one for the money; Myron Carlson nnn-nnn-nnnn (American Fork UT)

1928 Ford AA truck. Basic rolling truck without cab. Have rebuilt radiator, front cowling, firewall with fuel tank, steering column, engine, tranny, dually rear end and flat bed, $800. Have a Ford hand crank dump box for the AA for an additional $300; Richard Blodgett nnn-nnn-nnnn or xxxx@xxxx.xxx (Citrus Heights CA)

1928 International Six Speed Special 1-ton truck. Completely re-furbished with original 60-bushel IHC grain bed. Runs very good. Shown at Idaho, Washington and Oregon shows, also the ATHS National Convention at Salem, Oregon, $11950 Russ Shorten nnn-nnn-nnnn (Dayton WA)

1928 International Six-Speed Special 1-ton project truck. All components and many extras, Butler 300-gallon three-compartment fuel delivery tank, good tires, $3000. Located near Wilsonville, OR. Russ Shorten nnn-nnn-nnnn (Dayton WA)

1937 International D-300, cab-over, runs; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

1946 GMC with early cab, about a 2-ton with 12’ bed, very good sheet metal. This is a project but comes with many extra parts. Located in Redcrest, CA, $600; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

1947 International KB6 sheet metal, good condition, sitting on a long wheelbase truck chassis with a 19'-6" aluminum flatbed and a 7.3 Diesel/Allison automatic transmission. One of late brother’s un-finished projects. Located near Wilsonville, OR. Will part out; Russ Shorten nnn-nnn-nnnn (Dayton WA)

1949-50-51 Ford car parts, have lots; Wendell Newman nnn-nnn-nnnn (Carson City NV)

1950 Ford Sedan chassis, no engine or trans. Very good condition. Has 1965 Mustang rear end (rare). $275; Wendell Newman nnn-nnn-nnnn (Carson City NV)

1960 International 1/2 ton pickup, short narrow box, Isuzu truck diesel/special automatic, Camaro front end and heavy four-link rear end, excellent sheet metal. Please call for details. One of late brother’s un-finished projects. Located near Wilsonville, OR; Russ Shorten nnn-nnn-nnnn (Dayton WA)

1962 K W truck mechanical supercharged Cummins diesel 300 rated at 575 (NHRS) power steering (ROSS), 13 speed Arto 25139513 Spring driver’s seat, new gold paint. Ready to show, $18000; Robert Maddux nnn-nnn-nnnn (Philomath OR)

1964 Ducati Bronco 125 cc 1824 miles, tires like new, complete except batt shield. Bike is in fine condition. Call or e-mail for pics; Louis Montero nnn-nnn-nnnn (Jackson CA)

1966 Ford HD F703, rebuilt 330-V8, 5 speed main, 2 speed rear. No rust. New rubber seals on all windows. Full air brakes or electric powered brakes. Windshield wipers. Equipped to tow trailers with air or electric brakes. 10 ft split flatbed deck. Split to remove back half to connect 5th wheel hitch system, $12500. Will include a 460-V8 if wanted with truck; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

1966 GMC 3/4-ton pickup. V-6 auto, barn find, very straight condition with original title, one owner, little bodywork required, $3750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Durant car engine #W5-498539 with manifold, flywheel, starter, generator, clutch and water pump. Engine made by Continental Motor Corp for Durant Motors. Not stuck. May be 1928 (please send more information to me if you know). 4-cylinder. Cylinder head is 17-1/2" long, 7-1/4" wide with 15 head bolts, $350 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 8-track AM-FM radio, stamped Ford, $95. 8-track tape marked Ford, $10; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

International D301 diesel engine, 6 cylinder out of 1962, 3/4 ton, International pickup. Also 727 automatic transmission, $1500 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

VW powered buggy, on-road/off-road street legal Washington clean title, recent 1600 cc engine, built in 1996 in Lake Havasu City, AZ, $6500 invested, will sell for $4500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Wanted: 1973-80 GMC 6500 medium duty truck parts. Rust free straight hood & doors. A grille in good condition, dash pad, instrument parts, engine drive train parts; Greg Fosmark nnn-nnn-nnnn (text or call) or xxxx@xxxx.xxx (Issaquah WA)

Wanted: Corvair items, parts or vehicles; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Wanted: old vintage classic car, anything from the 30s up into the 70s in any condition. I will be traveling back and forth along the I-5 corridor from Bremerton WA south to Redding CA through the winter months so could stop and look at what you have if nearby; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Wanted: WW2 military Autocar U8144T (G511) U7144T (G510) truck parts or parts truck wanted, Hercules RXC parts wanted; Greg Fosmark nnn-nnn-nnnn (text or call) or xxxx@xxxx.xxx (Issaquah WA)

Wheels/tires, complete dual wheel/tire set for Nissan pickup. Tires 85%. Chrome plated wheels, mud and snow tread, $250; Duane Roecks nnn-nnn-nnnn (Glenoma WA)