April 2017 - Engines & Parts For Sale

All Classified Ads

Aermotor 2.5 h.p. fluted hopper engine, very original condition, very nice patina with the original lettering still very visible, ignitor, original mixer, etc. Very nice gears, no cracks, breaks or welds. Engine has compression but hasn't ran in a long time, $4150; Larry nnn-nnn-nnnn (Phelan CA)

American Gasoline Engines Since 1872 book. Yellow cover, by C.H. Wendel. Good condition. Have 2 copies, $75 each plus shipping; Bob Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cedarville CA)

Carburetors for 4 hp Cushman engine, and two other carburetors, pictures available. All appear in good shape; Leonard Riepenhoff nnn-nnn-nnnn (Santa Rosa CA)

Economy 2 hp Sparta hit and miss gas engine. On a good cart with needle bearing wheels. Comes with a coil. Light on compression. I have not started this one, it has been in storage for a number of years. $750. Can be picked up in Tacoma WA or for a $20 fee, I will crate and bring to Fastenal. Buyer to pay shipping. This is part of an estate sate; Jim Beeler 253 531-5106 (Tacoma WA)

Engines: 1-1/2 hp to 8 hp, have a variety, also parts; Jim nnn-nnn-nnnn MT (Missoula MT)

Engines: Sun Power 1-3/4 hp, complete, stuck. Waterloo 1-1/2 hp, missing muffler & mixer. Galloway 2-1/4 hp, missing mag. Famous 3 hp, vertical, no cooling tank. John Smyth 8 hp. Also some parts; Jim Harrison nnn-nnn-nnnn (Mountain Time Zone) (Missoula MT)

Fairbanks 1-1/2 hp hopper condenser cooler. Needs work, stuck, $250 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks Morse 1-1/2 hp Z. Open crank. Bosch type A mag. A couple of well-made reproductions parts. Duel fuel mixer. Has compression. I have not tried to start it. It has been in storage for few years. No cart. $350. Can be picked up in Tacoma WA or I can crate and bring to Fastenal for a $20 fee, shipping to be paid by buyer. This is part of an estate sale; Jim Beeler 253 531-5106 (Tacoma WA)

Fairbanks Morse 5 hp ZB, 1938. Running engine, all original, no CBW that I know of, $600; Mark Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)

Fairbanks Morse 6 hp Z, 1922. Running engine, older restore has several weld repairs, $700, pictures on request; Mark Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)

Flywheel cone-type clutch for large engine, off an Ingersol Rand industrial engine (21" diameter 6 bolt pattern) Fairbanks, $100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fuller & Johnson 1-1/2 hp vertical pump jack, in good condition, $500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Good 4 cylinder Murphy diesel engine, complete fan to clutch, make offer; Pat Ridders nnn-nnn-nnnn (Albany OR)

Gorham gas engine, rare and unusual California built engine. Single cylinder, 5 hp, open crank and open cam. Lots of brass. There is a repair to the water jacket and a weld on the top by one of the big bolts. The Gorham has not run for the last 6-8 years. When I tried to start the engine it turned over right away and runs very good. Battery and cart are not included. I have not seen or heard of another one like this style engine. Please check out the YouTube video of this engine running and more information about the builder, https://www.youtube.com/watch?v=VDtJQPhcZ3w or just put in GORHAM Marine Gas Engine in youtube.com, $3500.; Jim Beeler 253 531-5106 or xxxx@xxxx.xxx (Tacoma WA)

Hercules IxB5 engine with clutch and starter, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Ideal air-cooled engine, $600; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

International 2 hp vertical,1904, very early sn K-2651. Very good shape, no welds. Name plate reads "IHC Vertical Patents pending", $2500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

International Harvester engine 135. Has clutch, $500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

McCormick Deering 1-1/2 hp hit and miss engine. Turns over. Converted to points and coil ignition. I can get it to pop but have not had it running. On wooded skid, $250; Chris nnn-nnn-nnnn (Camano Island WA)

Missouri 1-cylinder marine engine made in Kansas City, disassembled, $300; Buck Evans nnn-nnn-nnnn (Greenville IL)

Model engine: All new 1/3 scale model hit miss engine, "The Flea". 6-5/8" diameter flywheels, 1-1/2" bore, 1-1/2" stroke, cast iron construction. Fully self-contained, finished and ready to run, $1500; Mark Bruto nnn-nnn-nnnn (Placerville CA)

New Way 2-1/2 hp vertical, sn 1956. Good shape, needs restored. Have new fan shroud in box, $900; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Reid 25 hp restored super charged oil field engine, mounted on a 4-wheel cart with draw bar for towing. It has a lawn mower engine to safely start it without having to climb the fly wheels. There is also a small air compressor installed to blow whistles etc. The engine has been stored indoors since restoration. It has not been shown publicly for many years. $10000 obo. In the next few months we will be offering 20 or so rare engines including side-shafts and European engines along with US engines. More pictures available by email. Gary nnn-nnn-nnnn cell or nnn-nnn-nnnn or xxxx@xxxx.xxx (Malibu CA)

Schmidt’s Chilled Cylinder 3 hp, 1907 pat. date on name plate, has cooling fan and screen, running condition on cart with battery, can send more pictures; Bill Majors  nnn-nnn-nnnn or xxxx@xxxx.xxx (Walnut Creek  CA)  

Sparta Economy, 6 hp, low serial number on a steel cart, has bad cylinder bore, $1500; Bruce Heppler nnn-nnn-nnnn (Covelo CA)

Stover 1-1/2, Model K hit and miss, with butter churn gear and pulley. Intake spring is weak. No cracks or breaks or welds that I can see. No cart. Has been stored for a number of years. Should not take much to get it running, $650. Will crate and take to Fastenal for a $20 fee. Buyer to pay shipping or can be picked up in Tacoma WA This is part of an estate sale; Jim Beeler 253 531-5106 (Tacoma WA)

Titan Jr, 1 hp, older restoration, battery ignition, on trucks, $1800; Buck Evans nnn-nnn-nnnn (Greenville IL)

Wisconsin V-4 engine off of hay bailer with clutch and starter, $500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Witte 2 hp logsaw engine, 1921, first year model, does not have the slanted hopper, American Bosch mag , $500; Bruce Heppler nnn-nnn-nnnn (Covelo CA)

Witte 2 hp type B. Serial number makes it a 1924. Missing main gas tank and splash guard. Has sprocket instead of pulley. Email or call and I can send you photos/video; Kip Keeney nnn-nnn-nnnn or xxxx@xxxx.xxx (Seattle WA)

Witte 3 hp on nice cart ,Wico mag, good condition $475; Larry nnn-nnn-nnnn (Phelan CA)