May 2017 - Misc. For Sale

All Classified Ads

Aermotor windmill and tower, functioning and unrestored. The tower is 4-1/2 ft. x 4-1/2 ft. at the base and is 22 ft. from the ground to the bottom of the platform. The blades are either 6 or 8 ft. in diameter - it looks like 8 ft. but I have not gone up yet to measure for sure. It also comes with a Dempster Mill lever water pump that was affixed to the windmills up and down shaft. I can assist with loading and might be able to help with delivery. Any questions please do not hesitate to call or email. Reason for selling is our wonderful City officials disapprove after 20+ years. Most of these on EBay seem to be in the $4000 to $5000 range although they look to have fresher paint. We will be glad to email pictures. $3,000 with the patina; Gary nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Malibu CA)

ATV tires: two 25x11-12 tubeless, 95%, $100; John nnn-nnn-nnnn (Yelm WA)

ATV: 2004 Land Pride ATV, 4X4, model 4400ST, new tires, new battery, Honda engine, top and windshield, $6000; John Nipper nnn-nnn-nnnn (Yelm WA)

Band saw, small Shop Master, made in Minneapolis MN, USA, $50; JH Keith nnn-nnn-nnnn (Hermiston OR)

Banjo trailer on steel wheels, for large gas engines; Duane Sauter nnn-nnn-nnnn (Huson MT)

Barn: 40X40 Butler built barn with plans, $1500; Sandra nnn-nnn-nnnn (Brentwood CA)

Black walnuts, all clean and cracked, but not separated, 5 lbs for $15 push shipping; JH Keith nnn-nnn-nnnn (Hermiston OR)

Blacksmith tool: Swage block, 4"x11"x15, 126 lbs, $630 obo; RC nnn-nnn-nnnn (Eugene OR)

Boat Trailer with tandem axles, $500 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Brush Hog rotary mower, 6', PTO drive 540 RPM, 3 point mount. good condition, make unknown. This is a big heavy duty mower. Can send pictures, $700 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Carburetors: a) Rayfield, all brass, Model L2, 1 1/4 venturi, patented 2/20/1911. b) Kingston, brass carburetor with steel bowl, Model L3, 1 3/16 venturi, patented 3/9/1915. c) Zenith Model T4X, 1 5/32 venturi, patented 2/29/1908; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Carriage: 1960’s Summit View carriage. Driver’s seat can be to side or middle – step on back for guests.  Matching glove box on back for tools or picnic.  Weight added on back step to keep it stable on steep changes in elevation. This could be used for the dressy section of a COE competition.  Always has gotten admiring looks.  Last time serviced was when driven four years ago.  It has always been stored in a carriage house. $5000. Will consider delivery for a fee; Horace Crawford nnn-nnn-nnnn or xxxx@xxxx.xxx (Walnut Creek CA)

Craftsman Cut-Off saw, bench & bagger, $115 obo; John nnn-nnn-nnnn (Dallas OR)

Demco/Victoria Hijacker premium ultra-slide bed mounted 5th wheel hitch, for 16k gvw trailer, less bed mount rails (rails available from manufacturer), $600; Bill nnn-nnn-nnnn (Centralia WA)

Discs: heavy duty good 7 ft off-set disc with cleaners and weight box, 22" blades, good bearings, good buy, $1000. 6 ft heavy duty offset disc, 22" blades, with cleaners, good bearings, $700. One 6ft front section pull disc, $250. Small tandem 4ft pull disc, $100; Bud Combe nnn-nnn-nnnn (Grants Pass OR)

Drill press: antique #2 small belt-driven drill press, ideal for display, $175; Dave nnn-nnn-nnnn (Aurora OR)

Drilling rig: Bucyrus Erie 22-W, 3-line machine, some tools, good condition, $15000; Pat Ridders nnn-nnn-nnnn (Albany OR)

Electric Motors: Dayton 2 hp Farm Duty electric motor. T Frame. 115V or 230V. 1740 rpm. reversible. 1 1/8 inch shaft. Listed in Grainger's 1984 catalog. Stock #6K313; 2 hp electric water pump motor, 3450 rpm. New, $100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Elevator hoist for picking up heavy motors and trans. for big equipment, $500; Sandra nnn-nnn-nnnn (Brentwood CA)

Estate liquidation, it all has to go: Trucks, tractors, rollers, trailers, compressors, tools, 3 pt backhoes, storage containers, fruit bins, pallets of everything you can think of. Forklifts, Case and Allis Chalmers, Fordson, John Deere and other tractors. Two miles east of Yakima in Moxee, WA. Selling mainly on weekends or by appointment; Richard Parker nnn-nnn-nnnn or nnn-nnn-nnnn (Moxee WA)

Farm wagon, John Deere, ready for farm rides. Has side rails, 16 ft bed (3 yrs old), all new tires, all new wheel bearings, bed painted, $2500; Phil nnn-nnn-nnnn (Enumclaw WA)

Farmall A cultivator parts: 2 sets left & right main frame, misc tool bar assemblies, (no shanks or shoes) 1 rear gang, pressure rods, 2 hand lift assemblies, rockshaft cross linkage, misc, $350 obo; Tom Winterrowd nnn-nnn-nnnn or xxxx@xxxx.xxx (Canby OR)

Ford tractor shop manual, FO-201. Covers Fordson major diesel. Excellent condition. Produced by I & T Shop Service, $28; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Front end loader: Minneapolis Moline hydraulic loader, 68” bucket, complete, $750 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Front end loader: Westendorf TA76, 8' bucket, complete. Loader is rated for tractors up to 140 hp. $1400 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Garage/Shop Sale: May 6th, 2363 A Burnt Valley Rd, Chewelah WA; Ruth Walker nnn-nnn-nnnn (Chewelah WA)

Gurries GP-50 field plane, 14 ft' bowl, 58' long, with manual, $3000; Sandra nnn-nnn-nnnn (Brentwood CA)

Hacksaw: Large, 110v electric, it is on its own table with legs, 12" blade, I don't know the make but there is some blue paint on it, $900; Ruth Walker nnn-nnn-nnnn (Chewelah WA)

Horse-drawn hay mowers, have 4, best offer on all 4; Tom nnn-nnn-nnnn (Cove Junction OR)

Howard 40" rotovator, model HN 812 B 40, ready to go to work, hardly been used, $700; Bill nnn-nnn-nnnn (Centralia WA)

Husqvarna 61 chain saw, 28” bar, run very little, $190; John nnn-nnn-nnnn (Dallas OR)

International 6’ 27-V tractor mower. Single wheel. Bolts to H or M Farmall and adaptable to most other tractors with brackets. Includes manual and extra tire, $275; Wendell Newman nnn-nnn-nnnn (Carson City NV)

International binder, 10 foot cut, power take off, plus a barrel of twine, last used in 2015, always shedded, possible 1935 John Deere B unstyled; Dennis Sauter nnn-nnn-nnnn (Missoula MT)

Jacobsen 4 Acre reel lawn mower. Engine stuck. May be 1922, $100 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 55 combine, 1966, self-propelled, last used 2016, always shedded; Dennis Sauter nnn-nnn-nnnn (Missoula MT)

Johnson 5-1/2 hp outboard motor, 1958, with fuel tank, hasn't been run or used for a few years, $150; Bill nnn-nnn-nnnn (Centralia WA)

Jointer: Powermatic Houdaille 6” jointer, model 50, table size 7” x 48”, good condition. Can send pictures, $400 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Letourneau Scraper Model LS Cable scrapers. I have two, $2000 each; Aaron nnn-nnn-nnnn (Walnut Grove CA)

Loader: Complete loader with pump for Oliver 70; Ivan Mason nnn-nnn-nnnn (Sayer KS)

Loader: Model 72-51 Terex loader, transmission doesn't work, make offer; Pat Ridders nnn-nnn-nnnn (Albany OR)

Maytag Washer: Grey 1930's circa Maytag washer, converted to electric, $100; Ruth Walker nnn-nnn-nnnn (Chewelah WA)

Meadows grist mill, 24 in stones, pics on request, $1250. Will crate & ship; Edgar Powell nnn-nnn-nnnn (Dyer TN)

Milling machines: Bridgeport, Morton, Famco, and some tooling; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Miscellaneous: John Deere 12 ft galvanized Lime/Fertlizer tow behind spreader. Farm built 12 ft tow behind culti packer. 6 ft John Deere cover crop tandem disc. 100 gallon L shaped fuel pack tank for a long wide pickup bed complete with hose, nozzle and hand pump. Pro tech Diamond plate across the top of the bed pickup tool box. 3 pt fertilizer spinner spreader. Near new; Tim nnn-nnn-nnnn (Clatskanie OR)

Moline drill with wood spoke wheels, wood box, good condition & decals visible; Carl nnn-nnn-nnnn (Woodburn OR)

Mower: John Deere sickle bar mower, 6 ft, hydraulic lift, $200; phone calls only nnn-nnn-nnnn (Goldendale WA)

Mower:  Farmall Cub sickle bar mower, needs pitman are stick, $75 ; Mark Parker nnn-nnn-nnnn (Lebanon OR)

New Holland hay rake wind row, $500; Sandra nnn-nnn-nnnn (Brentwood CA)

Oil tanks: Two 15 gallon bulk oil tanks with hand pump, circa 60's or 70's style, $50 for both; Bill nnn-nnn-nnnn (Centralia WA)

Oliver parts: Two motors, one gas, 1 diesel, for late 3 cylinder Oliver OC4 crawlers plus other Oliver parts; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Parade hay ride wagon, JD chassis, ready to use, rails, stairs, $2500; nnn-nnn-nnnn (Oregon House CA)

Parts Bins: Parts bin out of old John Deere dealership, unit is 8 foot by 8 foot by 2 foot, the bottom is wider and about 4 foot. Has 50 bins on each side with some drawer units. Is free standing and could be split into two units to put along a wall. Some damage on the bottom. Can load, $50; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Pintle hitch to go on logging truck or similar, like new, $100; John nnn-nnn-nnnn (Yelm WA)

Plow: Case plow, eagle hitch, 2-14 bottom, good, $150; Ray Gossett nnn-nnn-nnnn (Hermiston OR)

Plow: Farmall IH 2-14 bottom #8 rubber tires, rope trip, very nice; Al nnn-nnn-nnnn (Elko NV)

Plow: International 2-14 rubber tires, rope trip, very nice shape, new paint; Al nnn-nnn-nnnn (Elko NV)

Plow: John Deere 680 6-16 pull plow Big beam correct for 830s, need some work, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Plows: 2 old John Deere 2-bottom plows. One is a standard plow that is complete and works. Does need a little TLC to shares. Otherwise complete. Second plow is a JD 2 bottom disc plow. Missing one of the disc setups. $250 each or solid reasonable offer; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

Plows: IH 3-bottom, $400. John Deere 4-bottom, $400. 1 single bottom for ditching, $200; Sandra nnn-nnn-nnnn (Brentwood CA)

Plows: John Deere 2 bottom plow on steel; 2 bottom 3 pt plow; International 2 bottom plow on steel; International 3 bottom plow on steel; call for prices; Jerry Fischer nnn-nnn-nnnn (Gaston OR)

Power Kraft 10” radial arm saw & wrenches. Cuts all angles, $140 obo; John nnn-nnn-nnnn (Dallas OR)

Roofing: Hi-rib, 36”, 26 gauge galvalume roofing. Approximately 125 pieces, about 21' long. Price $40 per piece; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Seed tubs planters for International tractors, $200 per set; Sandra nnn-nnn-nnnn (Brentwood CA)

Sold the farm: 50’ grain auger, 8” on transport, pto drive $500. 70 gallon stainless steel tank, $100. Speidel weed wiper – wicks almost new, $500; nnn-nnn-nnnn (Glenoma WA)

Spring clean-up sale: Many items new and used; good used Henry pop-up hay elevator, field ready, $650. Hay elevator, one 20ft Little Giant with electric motor, works good, $500. Several one and two-bottom plows. John Deere heavy duty cat 2 3pt two-bottom plow trash turner, new style bottoms with tail wheel, like new, only $650. Ferguson 2x14" with trail wheel, $300. Howse 2x14" plow, like new, $250. Two 1-bottom plows. John Deere model 205 5ft bush hog, new U-joints, slip clutch discs and seals in gear box, $550. One 6ft Detroit Harvest 3pt sickle bar mower, good to go, $450. Several 3pt blades, some tilt angle reversible, many different prices. Good used 60" Landspride bush hog with slip clutch and owner’s manual, $800. One 3pt 3ft V ditcher, $400. Two new Priefert 3pt 5-tine V cultivators, $225 each. John Deere pull rake, steel wheels, with all teeth, field ready, $400. 10ft Easyflow seeder, fertilizer, good spreader, field ready, $350. Massey Ferguson 3pt new style bottoms, roll over 2x16" plow, $650. One

pull-type 7ft field cultivators, spring shank model, $200. One 3pt Land Pride PTO, V fiberglass, holds 100 lb seeder, fertilizer spreader, new, $450. One slightly-used Howard 3pt PTO. Metal tanks, V-spreader, good shape, holds 700 lbs, $350. Used 4ft tilt angle reversible rock rake, $200. Good used cement mixer with electric motor, $225. Good 3pt subsoiler, red, $25. Heavy duty 3pt towner on tool bar, 2-3 gang Hiller disc, $650. One used General 5ft box blade, no rippers, $350. One new BE Braber 6ft box blade with 3 pt rippers, $700. One new 3pt 4-ft Frontier box blade with rippers, $450. Two new small backhoe buckets, new, 16" and 20", $125 each. John Deere 3 pt 4-1/2 ft wide harrow, $400. One adjustable 3pt pull ditcher, $450. 2-3 yard pull scraper, 2 new tires with hydraulic lift cylinder, $1500. Good 4ft 3pt used Maschio rototiller with slip clutch, $800. Good used 3 pt Landspride 4 ft rototiller, model 1550 with slip clutch and manual, $1700. one good used Ford hd loader with front pump, 50" hd bucke

t step through model, $1200. One 14" line back one-bottom plow, $300. Ford hd dirt scoop, 3pt, forward and reverse, $150. Post hole digger: 9" Rankin, new bearings & seals in gear box, 3 pt, $600. New Holland pull-type bale wagon, PTO drive, model 67 or 68, take a 2 tie bale 42". Four new tires on 2 axles, $1400 obo; Bud Combe nnn-nnn-nnnn (Grants Pass OR)

Storage Tanks: Heavy duty for fuel etc. 300 gal. $195 and 1300 gal. $695. The larger tank can be separated into 300 and a 1000 gal tanks which are bolted together. Photos available by e-mail; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

Surrey: 1880 Surrey – in Rose Parade 2005.  Marshaled a group of Haflinger horses. When I acquired it, I stripped it down, repainted, and re-did the brakes. Original seats. Painted with the yellow roses of the Parade in 2005, edelweiss flowers from the mountains of Austria where the horses originated, and the Coat of Arms from the region. The painted-on details were hand done by a woman who detail paints classic cars. Comfortable for 4 riders. Includes semi-new surrey top, $6000; Horace Crawford nnn-nnn-nnnn or xxxx@xxxx.xxx (Walnut Creek CA)

Tank: stainless, appox. 700 gallon, excellent condition, $1500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Tire: One 11.2 / 10-34 Caravelle tire. Good tread but old tire, $50; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)

Tires: Six 10x22.5 Michelin truck tires on 10 Budd aluminum wheels, 75% rubber, $1200; Pat Ridders nnn-nnn-nnnn (Albany OR)

Trailer: 25 ft. 12K GVW max load is 8K goose neck flatbed trailer made by Champion purchased new in 2004. Has less than 5k miles on it. Deck is 20 ft long. The wood is in excellent condition, beaver tail is 5 ft long, the three ramps are 5 ft long. Dual axle, tires are ST235/80R 16 Load Range E, less than 5 yrs old and have less than 100 miles on them. Trailer does not come with a spare tire. Included is a Warn CE M8000 8K winch with cover, locked battery compartment and a Weather Guard lockable storage box. There is also a lockable storage area in the goose neck. Trailer is currently registered, pictures are available, $5500 obo; Frank (c) nnn-nnn-nnnn phone or text. (Loomis CA)

Trailer: 2015 Eagle Car Trailer. This is a 7 X 18 ft. 10,000 lb. trailer. Here is the site it was purchased from : http://www.signaltrailer.com/?p=flatbed-trailers Purchase by late husband to transport show car to auto shows. Only used once before death. Has dual axles with brakes on both. Stake pockets, self-storing ramps, mounted spare tire with spare hub and bearings, Mounted storage box on tongue with straps and tie downs. Only 400 miles since bought. Replacement cost as equipped would be $4000+. Located in Langley currently. New cost today at Signal Trailer is $3299 with NO MOUNTED SPARE TIRE, NO MOUNTED BOX, NO WHEEL BOOTS OR STRAPS, NO CHOCK BLOCKS IN THE BOX. Estate sale. $2900; Bruce nnn-nnn-nnnn or xxxx@xxxx.xxx (Langley WA)

Trailer: 5th wheel step deck, extend a deck, 8 wheel trailer, the tandem axle set up also swivels to crab walk if needed, trailer length is 45 feet, could extend to 60 feet, wood on deck needs replacing, has Oregon permanent plate, $5000 obo; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Trailer: Carson 4-1/2'x 8', single axle 1500 Lb. GVW. 4' tail gate ramp, $600; Jim Chamberlin nnn-nnn-nnnn (Auburn CA)

Trencher: Older Case Model T-66 mini crawler ditching machine, has one cylinder Wisconsin engine, runs, drives, steers and digs good but has a lot of wear. Recently dug a 75 foot long ditch with it, has a 6 foot auger, no blade. Comes with Manual, this machine is currently located near Redding California, $1500 obo; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Redding CA/Port Orchard WA)

Truck bed, 8 ft, for 1-ton dually, factory built, excellent condition, $300; phone calls only nnn-nnn-nnnn (Goldendale WA)

Wagner loader complete with pump, valves, no apparent leaks in cylinders, not beat up, $600; nnn-nnn-nnnn (Oregon House

Water Pumps: Two Demming water pumps, one assembled the other in pieces, work good for display with hit & miss engines, $40 for both; Bill nnn-nnn-nnnn (Centralia WA)

Welder: Lincoln 225 DC welder, AC auxiliary power 110 v, 2 cyl Onan engine. Has heavy leads, needs battery, welder is on 4-wheel cart, $750; John nnn-nnn-nnnn (Yelm WA)

Welder: Lincoln AC 225 amp stinger-ground clamp. Lots of cable, $125 obo; John nnn-nnn-nnnn (Dallas OR)

Welding hood & gloves, $35; John nnn-nnn-nnnn (Dallas OR)

Wheels: Four chrome wheels and lug nuts, 16"x6", 6 lug, 5-1/2" on center, these are heavy duty wheels and were on a trailer, $175; John Lang nnn-nnn-nnnn (Monmouth OR)

Winch: New 2000 lb winch utility cable length 30ft, line speed with full load 6ft per minute, $100; John nnn-nnn-nnnn (Yelm WA)

Winch: Warn Zeon 12 winch, 12000 lb electric, 70 feet cable, roller fairlead, controls, new in box, $900; John Eckhardt nnn-nnn-nnnn (Cloverdale OR)

Wood cutting Band saw, 14” tilt table & saw blades, $115; John nnn-nnn-nnnn (Dallas OR)

Wooden Shingle Mill. Antique. Needs restoration, but all parts seem to be there as well as a couple of shingle samples. Must be picked up, cannot be shipped. Approx. 64 inches wide both ways. Email for photos. Make offer; Judy Kitson nnn-nnn-nnnn or xxxx@xxxx.xxx (Page AZ)

Yard Sale June 2-3: Ford 2N, engines, pump, disks, metal lathe with tooling, photos available; Dudley nnn-nnn-nnnn (Campo CA)

Yard Sale: June 2-3 (June 1 for EDGE&TA members), 1228 Far Valley Rd, Campo CA, includes Ford 2N, several engines, pump, disks, metal lathe with tooling, photos available by email; Dudley Mills nnn-nnn-nnnn or xxxx@xxxx.xxx (Campo CA)