February 2018 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B with sickle bar, new tires, $750; Ray Fisher nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)

Allis Chalmers B, 1939, parade quality, easy start, good driver, very nice little tractor with no work to be done, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Allis Chalmers B, 1940. New paint, tires, seat, steering wheel, and brake bands. Runs great, a real collector and parade tractor. Thinning out the collection, $3000 obo. Pictures upon request, email or phone for more info; Lance Brazell nnn-nnn-nnnn or xxxx@xxxx.xxx (Sebastopol CA)

Allis Chalmers B, good condition, $1000; Ed Bring nnn-nnn-nnnn (Molalla OR)

Allis Chalmers D-17 series I with frontend loader, PS, high/low transmission, 3-point box scraper, gas engine, everything there, tin in good shape, runs with choke half on. Needs fuel lines and strainer cleaned, exhaust manifold broke where muffler attaches, tires decent, loader runs off its own front mounted PTO pump, good solid tractor has been sitting for few years, $3200 obo; Rob nnn-nnn-nnnn (Sprague WA)

Allis Chalmers HD7, sn 17803F. Complete. Good sheet metal, live hydraulic pump. Needs steering clutch work. Hauling available, $1500; Boyd Jeffries nnn-nnn-nnnn (Colfax WA)

Case 18-32 crossmotor. 1925. Nice complete, straight tractor w/. fender extension on the furrow side. Engine is seized and like most of them, it needs an exhaust manifold. This would be a great tractor to restore, or leave it in its work clothes. This tractor does not look to have been abused during its working life and should be easy to get running again, $3900. Open to offers and/or interesting trades. Email, text or call Jon @ nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Case 25-45 crossmotor, 1929. These are beautiful old work horses with lots of grunt. Engine starts easily and runs well. It is an older restoration and is ready to show as is or tidy it up with a cosmetic restoration. Currently on rubber bolted to the steel, but I have the original bands and grousers. Don’t miss your chance to get into one of these big cross motors as they don’t come up for sale all that often, $19500. Open to offers and/or interesting trades. Email, text or call; Jon @ nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Case 800, wide frontend, no wheels, make offer; Dan Casale nnn-nnn-nnnn (Denair CA)

Case C parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F&H hc245 Rear round spoke wheels 9x24 very nice and rare, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case DC-4 with heart shaped front end, hand clutch, live pto, hyd and eagle hitch. Runs, need some tinkering, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case DO, 1951, sn 5524957, engine apart but all there, have complete other engine for tractor, best offer; Matt nnn-nnn-nnnn (Denair CA) [see photos]

Case R industrial, $650 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)

Case R, sn 4230575, $650 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)

Case S front axle assembly: axle, wheels, drag link, wishbone, $125; Buck nnn-nnn-nnnn (Greenville IL)

Case SC tractor, recent barn find, always stored under cover. Very complete, missing only air cleaner body, engine runs, and tractor drives in all gears, reduced to $750. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)

Case VC, $ 250; Ray Fisher nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)

Case wide tread with two sets of wheels, one steel and one rubber, $4700; Dave nnn-nnn-nnnn (Boring OR)

Caterpillar 10 parts, 20 radiator and some parts, few 30 parts; Buck nnn-nnn-nnnn (Greenville IL)

Caterpillar 22, runs and drives, needs valve job, $2000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Caterpillar D-2 5J series wide gauge, runs good, has a hydraulic bulldozer blade on it, brand unknown. Undercarriage fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D25J with 6-foot hydraulic blade, previous owner stated it ran 2 years ago. Looks to be in good shape overall, has PTO, $2700 or offer. Also have a narrow gauge D23J that I believe is stuck between two gears, ran four years ago and won't roll now, $1000 or offer, no blade; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Caterpillar D-353, spacer plate engine, currently set up as a power unit, complete radiator through power take off. Will also fit D-9G and D-9H tractors and marine applications. Excellent running engine, $11000; Mike nnn-nnn-nnnn or xxxx@xxxx.xxx for photos or video (Prineville OR)

Caterpillar D6, sn 4R90SP. Has later 318 (90) engine, machine runs and drives good, excellent undercarriage. Mounted double drum control unit. Extra parts included, hauling available, $2000; Boyd Jeffries nnn-nnn-nnnn (Colfax WA)

Caterpillar D-7 3-T series, 1948. Runs great. Has an electric start pony that runs well. Tractor has hydraulic assist steering and forward/reverse lever. Undercarriage is good, grousers are a little low. Has a small oil leak on one final drive and radiator needs a few small leaks fixed. Tractor is bare with no attachments or accessories, $4000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar NOS Ensign needle valves, $180 each; Buck nnn-nnn-nnnn (Greenville IL)

Clamp-on duals: two 12”x24”. One with no tire, one with 14” x 24” tire (40% good). Set $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Cletrac DDH, sn IL7242, very good undercarriage, sheet metal and radiator. Original headlamps and engine side panels. Been shedded. Engine disassembled but have all parts. Nice one to restore. Hauling available, $1800; Boyd Jeffries nnn-nnn-nnnn (Colfax WA)

Cletrac W radiator, $300. Some engine parts; Buck nnn-nnn-nnnn (Greenville IL)

Co-ops for sale, have two, Number 2 and Number 3, dated 1937, $1000 for both; Gerald nnn-nnn-nnnn (North Idaho)

Cylinder head for International 6-cylinder 236 cubic inch diesel engine from 460 Farmall, $180 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farmall 200, runs good. Aftermarket three-point hitch, 12v electrical system with alternator, extra remote hydraulic valve, PTO. Will need one rear tire soon, everything else in good condition, $1000 obo; call or text Joe nnn-nnn-nnnn or email xxxx@xxxx.xxx (Escalon CA)

Farmall 230, sn 1513 J, working two-point hitch, runs good, new clutch, and fresh paint. Tires are in fair condition, 12v system with new alternator. Front cultivator mounts available, $1200 obo; call or text nnn-nnn-nnnn or email xxxx@xxxx.xxx. Located Escalon CA

Farmall AV, 1948, restored parade quality, great rubber, no work to do, runs well, $5000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Farmall Cub Lo-Boy, 1948, sn 6582-10566, with mounted International 1000 loader, has new rear tires, front tires are excellent, weights in hand. Cub has all rebuilt quick-tatch hitch primed and mounted, one bottom plow, homemade 3pt attachment, belt pulley gear box attachment for belt work. Has new bench style seat, rebuilt mag, new headlights. Paint is good, no rust. 1000 loader is collector piece and in excellent shape, protective white paint. Everything works. Bucket is in excellent shape also, no dents or bends. 3 chain hooks on back side and hole on front edge of bucket for pin or hitch ball. Have all manuals for both pieces, plus info on attachments. Tractor runs, $3500; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

Farmall Cub Lo-Boy, runs great, in very good mechanical condition, sheet metal very good, ready for you to paint it. Price reduced to $2400. Email for photos, YouTube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)

Farmall Cub parts: Four 6-volt flat back lights, good condition, needs rebuilt, $5 each. New rear mount step, $25. New undercarriage mount bar, (for blade?), $30; Cub Lo-Boy standard seat mount, $25, or all for $50; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

Farmall Cub, 1948, not restored but very nice. Very good rubber, easy start and drives nicely. Too many tractors and need to reduce inventory, $2750; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Farmall Cub, excellent motor, new rear tires and tubes, excellent sheet metal, WRONG COLOR!! Has lights, comes with an original Henderson manufacturing company hydraulic loader with manure bucket in like-new condition. This is a very nice unrestored cub, reduced to $1950; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall H, M, spinner handle crank; Al nnn-nnn-nnnn (Elko NV)

Farmall M, 1951, single front. Good tires on rear. Most sheet metal and duplicate parts. Runs but needs radiator work. Located 38 miles north of Bakersfield. Call or email for pics and price; Ray nnn-nnn-nnnn or xxxx@xxxx.xxx (Terra Bella CA)

Farmall M, runs, fair shape with trip loader, no bucket, $900 or $500 with no rear tires and rims; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall M, tall tractor, gas, has gear type drop boxes and 20” single front. Aftermarket wide front will also be available. Engine now running, stored inside, good sheet metal and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall MD tractor, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good. Located in Redcrest, CA. $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall regular parts, T20 crawler parts, F series etc. O12 carcass, T20 block, head crank, head etc. Fair prices; Larry nnn-nnn-nnnn (Phelan CA)

Farmall sheet metal from A to 450 plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall spark arrester that mounts under muffler, was used with mounted corn picker from 1950s; Al nnn-nnn-nnnn (Elko NV)

Farmall Super C, 1954, wide front. Case loader, very good rubber, fast hitch, nice paint, decals, sn195954J. Excellent running, live hydraulic loader, $2750; Al nnn-nnn-nnnn (Elko NV)

Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axle. Tractor has aftermarket cultivator frames front and rear, $2000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall Super M motor stuck missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Ford 2N, fair tires, nice metal & paint, runs good, $1200; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)

Ford 740, 1955, fully restored, power steering, Howard low range, Rest-O-Ride seat, $4800; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 8N engine. Good parts, except pistons and crank, $150; Frank nnn-nnn-nnnn (Manning OR)

Ford 8N front distributor. Just spent $425 on new brakes and seals and a tranny bearing. Gears still a bit noisy. Mechanic said rust on gears from rain leaking through boot on gearshift, but should quiet down with some running. Very nice metal and paint, fair tires and a strong engine. All new lube, $1800; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)

Ford 8N front wheel weights for 16" wheels, $100; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Ford 8N items: 8N motor, 1947, sn 8N23451. Runs, good OP, head and flywheel machined. Has new water pump and manifold. Starter and generator checked out. Carb & distributor rebuilt. Needs rear main seal, $450. Will sell bare motor for $150. 8N Ford wheel with good Alliance 11.2x28 tire, $250. Heavy duty run stand setup for 8N motors, also has Chevrolet adapter, includes radiator, $300. Have many new and used 8N parts including a belt pulley. What do you need?; Rick Murray nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Ford 8N restored, original rubber, newer paint, lights, front bumper, sn177, reduced to $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 9N front wheel weights, $100 pair. Early brake pedals, same both sides, $100 pair. Rear wheels, $100 each; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Ford 9N. Not sure of the year. Not running and tires are junk. Use as parts or restore. Enough on the negative, here’s the positive: Front axle extensions have grease zerks in front, rear axle housings have solid mounts for fenders, fenders in good condition are double ribbed, rear wheels are 32x8, front and rear wheel weights, hood is in fair condition and takes snap in battery cover and has narrow top rib, $750; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Four 8.3x24 eight-lug, 3-1/4 spacing 6" center hub, 80% wear left, $250; Ed Bring nnn-nnn-nnnn (Molalla OR)

FREE: Two 13.6 X 26 tires with fair rubber; Dave nnn-nnn-nnnn (Boring OR)

International 3414 diesel backhoe. Shuttle trans broken, engine ran when parked but fuel injectors need work. Has good front loader. Backhoe is worn but still works and could easily be adapted to something else. Fairly new hydraulic pump and rebuilt starter. Useable rubber, $1200 or trades for motorcycles, scooters, sidecars, Oliver HGs; Ken nnn-nnn-nnnn (Goldendale WA)

International 350 Hi-Utility fast hitch 1 remote runs needs ta work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 414, no motor, good for parts or replace motor with something interesting (make hotrod?). Could be 3414 parts, $300 or trades; Ken nnn-nnn-nnnn (Goldendale WA)

International 460 utility tractor with 282 cid diesel engine, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International B275 - B414 (British) parts, cylinder head, hydraulic parts, steering parts, axle housings, transmission and rearend gears; John Lang nnn-nnn-nnnn (Monmouth OR)

International Farmall 460 with front loader. New front tires, rears good, $1500 firm; Ed Bring 503 829-8528 (Molalla OR)

International TD-40, sn TCC4402. Engine free, all frictions workable, undercarriage fair to good. Shedded, ex-farm machine, hauling available, $1500; Boyd Jeffries nnn-nnn-nnnn (Colfax WA)

International TD-6 crawler with straight blade, runs. Needs some work or for parts, $1800; Steve Libra nnn-nnn-nnnn (Lebanon OR)

International TD-6, sn TDBK24822T7, wide track, $650 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)

International TD-6, sn TDBK7602T7, wide track, $650 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)

John Deere 2010, 1961 utility, sn 2010 RU 15772. Parts or restore; Phil Wall nnn-nnn-nnnn or cell nnn-nnn-nnnn (Buckley WA)

John Deere 26" waffle wheels in great condition, no rust, good mounting holes, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 30" cast centers for rack and pinion axles, fits 50 to 730 and newer, part # F1590R, $50 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 40-H with 34" wheels and single front parts only; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere 420, excellent shape, $3200; call or text Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere 420U, 1957, sn 106102, restored, wide front, 4 speed, PTO. Runs and drives well, new tires on front, 80-90% rear. Rear wheel weights, new brakes, 3pt with correct 3rd link. Four-year-old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork. With restored 415-A 3pt integral (2-14 bottom) plow. New Tyler Bucheit points, extension and trash boards. Bottoms are soft painted when not in use, nice original set up, everything works, $5000 firm; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

John Deere 430 Utility, 1958: When I bought this low-hours tractor in 1995 it had 1250 hours on the meter, it now shows 1536 hours. It starts right up, runs great and has never used any oil. Minor sheet metal damage to grill and lower nose, no dents anywhere else. In the years I have had it I replaced the water pump and front tires. I changed all seals and bearings in the transmission and differential total about $1500. I rebuilt the 3-point unit and the hydraulic pump. I replaced the clutch. This is a 5-speed tractor with live PTO. Rear tires are 12x24 and have lots of tread left. Fronts were new about 5 years ago. Great tractor to use as is or perfect for a show quality restoration, $6000; Jim Temple nnn-nnn-nnnn (Noti OR)

John Deere 430: When I bought this low hours tractor in 1995 it had 1250 hours on the meter, it now shows 1536 hours. It starts right up, runs great and has never used any oil. Minor sheet metal damage to grill and lower nose, no dents anywhere else. In the years I have had it I replaced the water pump and front tires. I changed all seals and bearings in the transmission and differential total about $1500. I rebuilt the 3-point unit and the hydraulic pump. I replaced the clutch. This is a 5-speed tractor with live PTO. Rear tires are 12x24 and have lots of tread left. Fronts were new about 5 years ago. Great tractor to use as is or perfect for a show quality restoration, $6000; Jim Temple nnn-nnn-nnnn (Noti OR)

John Deere 440I wheel tractor, just parted out and on the shelf, most parts available, many are the same as 420 and 430 models. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)

John Deere 4-each 420 short blocks, rebuilt heads M-3995-T; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere 50, 1953. Original paint, good tires, one set of rear weights, $2500 obo; Kent nnn-nnn-nnnn (McCleary WA)

John Deere 50, lots of parts, square wide front, power steering, fair sheet metal, 12.4-38s 80% L/S bar; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 530, wide front end, runs and looks good, $2340 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 60, 1953, runs, new tires, paint, standard, low seat, $7000; Marlen Knutson nnn-nnn-nnnn (Bow WA)

John Deere 60, narrow front tires with roll-o-matic. Also has 42" rear tires, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 620 LP Black Dash, runs on 42" rubber with 16" single front with 3pt, no toplink Airstack new battery box, cables and seat cushions, or John Deere 720 Gas Black Dash turns over on 42"rubber with 16"single front with 3pt no toplink Dual Hydraulics Airstack, $2750 each or $5000 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere A parts: right axle and crank shaft; Phil Wall nnn-nnn-nnnn or cell nnn-nnn-nnnn (Buckley WA)

John Deere A, 1938. 36" Cast rear wheels. New tires, older restoration. Running tractor, $2500; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere A, 1948, rebuilt with oversized aluminum pistons. Strong runner, $2000; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere AOS new reproduction hood, $525. Also have other AOS parts, call for list; Dave nnn-nnn-nnnn (Boring OR)

John Deere AR, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere AR, 1936. Running tractor. Round spokes on the front. Mismatched rear wheels and tires. Older restoration, $1500; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere AR, 1946. Electric start w/. lighting package. This is a really nice straight original tractor. Engine is loose and will be easy to get running again. Excellent for restoration or get it running and leave it in its work clothes, $1850. Open to offers and/or interesting trades. Email, text or call; Jon @ nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

John Deere AR, 1949, styled, nice shape, cane and rice tires, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere AW, 1948. Running tractor, nice paint, fair tires, $2000; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere B, 1938 long frame, rebuilt engine spokes on rear, runs good, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939. Motor stuck, good tires, good project tractor, $850; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere B, 1941. Runs, older restore, new wheels & tires, live hydraulics, delivery available; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)

John Deere B, 1942. Ran when parked in the barn a few years ago. Loose splines on the clutch driver. Sheet metal is rough, have extra hood and crankshaft. New rear tires, $1500; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere B, 1942. Tractor runs, nice original rear tires, new front tires, $900; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere B, 1943, hand start, repainted, parade ready, good tires, $2300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere B, 1951, Rollamatic, sn 292199 (?), needs restoring; Phil Wall nnn-nnn-nnnn or cell nnn-nnn-nnnn (Buckley WA)

John Deere B, 1951. Good tires, fair paint. I have used the tractor to rake hay for several years, $1800; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere BO/BR. Brand new, reproduction, 18-gauge fenders made by B. Lefever in PA. They fit serial #327,160 and up. They have surface rust from sitting in my shed for 13 years and they have never been put on the tractor. Pictures available, $260; Bob Currie (email, text, or call) Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

John Deere cast iron front end support closed bottom for styled model B, years 1943 to 1945 used during the war years. Good condition, $125. Also have other angle iron front supports and a press steel frame front support, $75. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

John Deere cast wheel centers for model D styled and unstyled. Casting #D2570R. For 28" rubber. Good condition good splines. I don't see any cracks, $250/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

John Deere cast wheel centers for styled models A and B. Set #1: Casting number A3402R for 42" rubber fits AN/AW or BN/BW bolt in hub style good condition. I don't see any cracks. 15 spline hubs included, $450/pair. Set #2: casting numbers A3419R for 38" rubber. These centers are correct for the real late styled A and B tractors. They have the 4 slot holes for wheel weights and the 4 round holes as well. Some of the earlier centers only had the 4 slot holes. Bolt in hub style. Good condition. I don't see any cracks, $250/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

John Deere D, 1945, stuck but complete to go to good home, reduced to $1250 obo. Come look, make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere D, 1949, excellent tires, electric start, body in great shape, right hand housing gasket leaks, $5000; Marlen Knutson nnn-nnn-nnnn (Bow WA)

John Deere H, hand start. Starts easy and runs good, with 4-row cultivator. Has new pistons and new valves, $3500; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere H, parade ready, $3500; call or text Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere Lindeman BO crawler, 1943, overhauled engine, $6000; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’ Alene ID)

John Deere M factory drawbar, $90. Final drives each side, $140 each. Torque tube, $40. Cast iron moon wheel covers, pair, $75. Touch control hydraulic assembly, $90. 15-inch cast iron front rims, $75 for pair. 24-inch WAFFLE rims with tires mounted, $575; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

John Deere M, 1951. Good rear tires. Very good original condition, complete, starts easily, and runs and drives well. Very good sheet metal, unmodified front end, working hydraulics, $2900. Email for photos, YouTube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)

John Deere M, excellent shape, $2800; call or text Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere MC parts: tracks, rollers, idlers, sprockets, trans., final parts; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere MT with two front ends plus an attached cultivator, $2500; Dave nnn-nnn-nnnn (Boring OR)

John Deere NOS clutch pulley, A17R, $250. NOS JD 3-way fuel valves, $200 each. NOS JD GP Ensign needle valves, $180 each; Buck nnn-nnn-nnnn (Greenville IL)

John Deere R, 1953, nicely restored, new tires, nice paint. Ran it last three years in parades. Strong runner, to use or show, $6000. Will take guns on deal. May deliver for price; Dan nnn-nnn-nnnn or cell nnn-nnn-nnnn (Lander WY)

John Deere Slant Dash B, 1940, running tractor, $1200; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere two-cylinder radiators. Top tank casting numbers: B758R, unstyled BO and BR with fan shroud top tank rusted through, $75. B2602R, late styled B with shutters, $125. B1802R, styled B s/n96000-148499 with shutters and shroud small hole in bottom tank, $100. B3566R 520/530 with fan shroud, $100. F864R, late styled G pressure cooling system non-water pump bottom tank, $100. F3122R, 70/720/730 gas or diesel, $100. All radiators have not been leak checked. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

Massey Ferguson 65, new battery, rebuilt carb, good rubber, runs great, $2900 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)

Massey Ferguson quick-change belt pulley attachment, very unusual, $250; Buck nnn-nnn-nnnn (Greenville IL)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris Pony, 1950, new paint, good rubber, runs good, ready for parade, $3500; Orval nnn-nnn-nnnn (Lebanon OR)

Massey Harris Pony. Was stored inside barn fresh, ran when parked, $500; David Itel nnn-nnn-nnnn (Aurora OR)

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4 parting out: orchard belt pulley, shutters, plus misc parts.; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1000; McCormick Deering O-4: Very early motor stuck, missing orchard sheet metal, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel engine free and 1 parts tractors, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering T20 parts crawler, mostly complete, not stuck, missing hood, $350; Larry nnn-nnn-nnnn (Phelan CA)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick OS4, 1948, restored condition, easy start, good driver; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

McCormick/ International O12 tractor, mostly complete, no hood, stuck, decent tires, $350; Larry nnn-nnn-nnnn (Phelan CA)

McCormick/International W12, 1936, complete, will run with a little cleaning, $1000; Larry nnn-nnn-nnnn (Phelan CA)

Minneapolis Moline 445 Universal, gas, 1956, 38 hp, 13.6-38 rears, 16” fronts, 2 remotes, 3-point, 540 rpm PTO, good running condition, $3200. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline G1000 diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals, $3750. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, diesel, 1960, 68 hp, 23.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9 ft Cancade hydraulic, two-way, front blade, $3750. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline radiator and front nose. Missing screen but nose is in excellent condition no dents or dings. Unsure which model it fits but looks like RTU or ZTU, $100. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

Minneapolis Moline RTE/RTN parts tractors, one wide, one single front, no rear tires, $400 for both; Dave Bechtold nnn-nnn-nnnn (Boring OR)

Minneapolis Moline ZAN parts, some still left, no engine parts available. Call with needs, very reasonable prices; Chuck Barker nnn-nnn-nnnn, lv msg (Albany OR)

Oliver 77 RC, 1949, engine stuck, wide front, pto. No grille, good hood & fenders, $400 or trades; Ken nnn-nnn-nnnn (Goldendale WA)

Oliver 80, Wheatland tractor, $1400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Oliver 990 GM Diesel 1960 twin stick pto and hyd, motor stuck, needs radiator, $6500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver OC3 and Cletrac HG starters and magnetos, have several from rebuilt to cores of each, ranging from $75 to $200 depending on condition of part; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Parting out Massey 65 gas tractor, good engine. Also Deutz 4005 and Allis Monarch 35 crawler; Buck nnn-nnn-nnnn (Greenville IL)

Power Horse, Model A20, 1938. Made in Salt Lake City, UT, $7900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Radiator for Allis Chalmers M, $100; Ernest Walker nnn-nnn-nnnn (Klamath Falls OR)

Rims, 38” for Oliver 88, have two, $100; Ernest Walker nnn-nnn-nnnn (Klamath Falls OR)

Rims: two John Deere 12” x 36”. Type: 2-rib rims. With tires (10% - 20% good). $100 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rumely Oilpull, 1923. 20-40 model G. Excellent project tractor. Engine is loose. It has good pinion gears, but bull gears will need to be replaced. Transmission has damage but comes with a spare, $21500. Open to offers and/or interesting trades. Email, text or call; Jon @ nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Tires & tubes: two rear tractors tires & tubes, Firestone made in USA, 9.5 x 32". All like new, used to make an emergency move, less than one mile, $400; Carl von Seggern nnn-nnn-nnnn or xxxx@xxxx.xxx (Escondido CA)

Tires and wheels for Farmall tractors, H thru 400. Call or email for pics and prices; Ray nnn-nnn-nnnn or xxxx@xxxx.xxx (Terra Bella CA)

Tires: 11.2x28, two new at $125 each, two at 70% for $50 each. Two 5:50x16, $20 each. Two 6:00x16, $20 each; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Tires: Rear tractor tire,10 x 24 inches, $15. Two rear tractor tires, 12.4 x 24 inches, $15 each. Front tractor tire, 3-rib, 7.5 x 16 inches, 8-ply, $20. Photos available; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Tires: Two 750x16 6 ply Goodyear single rib cane and rice tires, $150 for the pair; John Lang nnn-nnn-nnnn (Monmouth OR)

Tractors: Ford NAA, 1953. Five Ford 8Ns. Three Ford 9Ns. Two Ford 2Ns with Sherman combo trans. One Farmall M. One John Deere 40U. One Case VAC. One International Cub, 1966 Industrial model. Three Harry Ferguson T0-20s. Two Ferguson T0-30s. One Ford 800. Many parts for N series Ford tractors; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Wheel weights. Aftermarket for John Deere approx. 1500lbs each. Casting BW705, have 2 weights, $150 each. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

Wheels: pair of iron wheels with lugs that fit the 9N Ford tractor. Make offer; Owen nnn-nnn-nnnn (Nampa ID)

Wheels: two 10” x 26” wheels from a John Deere H. With 7 lug bolt holes, $35 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wheels: Two 12x28 four rail powershift rims, $200 obo (each); John Lang nnn-nnn-nnnn (Monmouth OR)

Wheels: two wheels, 12” x 36”. 9 lug bolt holes on a 9-1/2" circle. No tires, $100 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)