3 heavy duty line shafts supports, $200 obo; Ray nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)
3-point hydraulic quick latch. Fits on tractors with hydraulic 3-pt lift on rear. Nearly new, photos available, $80; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
8’ fluorescent shop/garage light. 4 tube style, $20. High-pressure hot water spray cleaner made by Electric-Magic, on wheels, $50. Kerosene heater, $15; Big pick-up tool box. All steel with dual top locking doors, 64 x 15-1/2 x 21 inches, photos available, $50; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
Aeolian push up player unit. 65 note with rolls. Rebuilt and plays great, $700. Some upright player pianos that need rebuilt, $300 each; Owen nnn-nnn-nnnn (Nampa ID)
Aermotor windmill: new 8 ft windmill with new 27 ft tower (never put up). Complete mill & tower, ready to pump water or yard decoration, $5500; Tony Giefer nnn-nnn-nnnn (Lindsay CA)
Aermotor windmill: rebuilt 8ft windmill motor, new bearings. Has sails, tail vane & bonnet, $1500; Tony Giefer nnn-nnn-nnnn (Lindsay CA)
Allis Chalmers water pump. 10 hp, 3-phase 220–440 V 3500 RPM induction motor. 3-1/4 inch inlet, 2-1/4 inch outlet, flanged fittings. Stored for years, $350; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)
Antique mining equipment, boilers (one new), antique rail road items; Ray Fisher nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)
Antique ripper on large steel wheels. Great yard art or restore. Wheels in great condition, $250; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Antique well drilling equipment and steam pumps, foundry equipment; Ray Fisher nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)
Antique wind generators (Wincharger, Winpower, Jacobs, Air Electric, Paris-Dunn, Wind King, etc) made in the 20s, 30s and 40s for sale as well as many old propellers and related items. Some modern New Old Stock NOS as well. Ready to be restored and displayed or put into service. Most are 24- 36 volt DC. Also stationary electric 36v power plants, gas and kerosene by Delco light, Kohler, Fairbanks Morse, Oman etc. Also many 32 volt appliances, antique 32 v motors, battery powered DC welders and many other related items. Early 1900s brochures, owner manuals posters etc for the above. Email or call with interests, photos available. Prices range from $250 to $3000. FOB Palmdale, CA area; Jim Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Acton CA)
Baler/Rake/Mower: John Deere 24T baler: dealer overhauled. Lots of new parts. Bales great. 190 bales since overhaul, no re-bales. Stored inside. Three new rolls of twine. Great working vintage collector piece. Paperwork for all work done, $6000. John Deere 650 3 pt rake. Five bar, all tine holders covered (short grass). No welds. Have extra new tines, $900. Mower: Tarrup 204 3 pt disc mower, manual lift, bar tarp cover. In great shape, no welds. Have op manual with parts list (some parts cross with JD), $600. Would like to sell as a package for $7000. Photos available; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Orcas Island WA)
Black & Decker Super Service valve refacer. Size 9/16. Type: NW. Serial: 1043865. $400 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Black & Decker valve seat grinder kit. Model 1710-S. About 10 grinding stones and about 5 valve guide studs. $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Black walnuts, clean and cracked, $4 per pound plus shipping anywhere in the USA. 10 pounds for $18.88 USPS; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Boat carrier for camper shell, $100; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Boat: 14-foot fiberglass boat, no seats or windshield. Good hull and Johnson 33 hp outboard motor. No trailer. I can help load, $200 or trades; Ken nnn-nnn-nnnn (Goldendale WA)
Bobcat tractor wheels with 10 x 16.5 Firestone tires. Wheels have 6-bolt pattern, photos available, $100; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
Brush Hog rotary mower, 6', PTO drive 540 rpm, 3-point mount. Good condition, make unknown. This is a big heavy-duty mower, $600. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Car and small pick-up snow chains, various sizes, take a look (original), photos available, $10 set; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
Cart: heavy-duty industrial, $200; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Case Heritage Eagle magazines, 55 issues. Old Abe News, 52 issues. Case calendars, 2012-2017. $100 for all; Ray nnn-nnn-nnnn (Hermiston OR
Caterpillar gensets (2): Cat D8800 engines with GE generators. Each 50KW, 2400V, 3-phase. Control panel, switch gear and manuals. Under 4000 hours each since dealer rebuild 55 years ago. Operated last winter. Use a generator, repower 3T series D-7, or as stationary engine. Photos available; Mark nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)
Cement mixer Kwik Mix with Stover CT2, $800; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Chandler Pump CO piston water pump flat belt pulley 1-1/2" suction, 1" discharge, very unique, $500 obo; Gary Covert nnn-nnn-nnnn or xxxx@xxxx.xxx (Cottonwood AZ)
Cleaning up the ranch: Skeleton of an old pull type combine. Not complete, best offer. Skeleton of an old ground driven manure spreader, best offer. MF 3pt sickle bar mower. Worked when last used, best offer; Steve Libra nnn-nnn-nnnn lv msg (Lebanon OR)
Concrete bucket for crane, $350; Don Chappell nnn-nnn-nnnn (St Helens OR)
Crane mats: Have 10 mats 4’X20’ very good, $7500; Don Chappell nnn-nnn-nnnn (St Helens OR)
Crucible, used for melting metals. 10" tall, 8" diameter, walls are 3/4" thick. Has markings: AES 5293, Aug 16, No. 20, $50; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Electric Motor: Fairbanks Morse Electric Motor, 75 hp, Type HV, 3-phase, the motor is 3-foot diameter, has 14-inch pulley with 14-inch face, $500; Ray nnn-nnn-nnnn xxxx@xxxx.xxx (Tucson AZ)
Farmall fast hitch 2-bottom plow, nice original, $350. Also sickle bar mower, needs pitman stick and pto shaft, $175; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Four IH-185 Unit Planters, $250 each. Located in Redcrest, CA; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Front end loader: Minneapolis Moline hydraulic loader, 68” bucket, complete, $600. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Generator powered by V4 Wisconsin engine. LPG, easily converted to natural gas. 20kw with transfer switch skid mounted, only 165 hours on it. Runs and operates perfect, $1600 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Generator: North Star PTO generator, 13000 watt. Generator, trailer and PTO shaft new ten years ago and in good condition, never used. Always garaged, $1000 obo; Mike Bohlen nnn-nnn-nnnn (Pasadena CA)
Hammer mill: Montgomery Ward, 16 hammers, 5 screens. Runs with flat-belt pulley. Very good condition, complete, hook it up and use it, $350; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Hayride wagon with rails and welded steps. Stained heart redwood, ready to use. Collectible John Deere chassis, $2000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Hydraulic pumps, have two that came from a large lumber mills spare parts inventory. One is a commercial InterTech pump part #316-9620 058, 14-spline shaft that is just under 1-1/4 in. It is a two-section pump with 1-1/4 inlets and 1” outlets, probably from a front-end loader or forklift. It has been rebuilt at some time in the past. The other pumps maker is unknown, I think it may be a Parker pump, same shaft with 1-1/2 inlet and outlet. There is no tag on it. $300 each, pictures on request; Jerry nnn-nnn-nnnn (John Day OR)
International Harvester milk cream separator. Model 3S, $180 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere Killefer Model 2-02 tool bar with three shanks, steel wheels, hydraulic cylinder. Use it or make some great yard art, price reduced to $400. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
John Deere log cart, $200; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
John Deere mower parts #5, M-20, M-51; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
John Deere, 4-wheel, trailer. Great for hay rides, $1000 obo; Steve Libra nnn-nnn-nnnn lv msg (Lebanon OR)
Jointer: 6” Jointer. Powermatic Houdaille, model 50, table size 7” x 48” Good condition. Can send pictures. $400; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Little Dipper backhoe unit built by the Wag Company came off an older Kubota tractor around 30 hp. Looks to be in good shape, not used a lot, $2900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Loader parts: Parts for John Deere loaders Ateco, 71, 90, 91, 831; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
Loader: Hough HA frontend skip loader, all there, not running, the tractor is sitting on a homemade 2-axle flatbed trailer and goes with it, NO TITLE. I rescued from the scrapper and would love to see it go to someone to do something with it, $500 obo; Rob nnn-nnn-nnnn (Sprague WA)
Loader: Mid-Western industrial Massey-Harris Ferguson F32 loader, $450; Larry Busack nnn-nnn-nnnn (Longview WA)
Massey Ferguson 10?12? baler with gasoline engine. Worked when last used, $1500 obo; Steve Libra nnn-nnn-nnnn lv msg (Lebanon OR)
Molds to pour your own babbitt bearings for Aermotor 8 ft windmills. Bearing part 708 for pinion gears and bearing part 752 for large gears, $100 each; Tony Giefer nnn-nnn-nnnn (Lindsay CA)
Mower: Ferguson side mount sickle bar mower, model FBO 35. Belt drive hydraulic lift looks unused, $100; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Old core drill with winch. Has complete Waukesha motor & radiator. Hand crank only; there is no place to mount starter. Engine stuck. Some drill bits but no drill stock. Very heavy, $400 or trades; Ken nnn-nnn-nnnn (Goldendale WA)
One roll of barbed wire for fencing, photos available, $50; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
Ore crusher: Simplex #1 ore crusher made by F.W. Braun & CO. Small for assay office, $1400; Buck nnn-nnn-nnnn Greenville IL)
Parts bins: John Deere parts bins out of old John Deere dealer. 8 ft long, 6 ft tall, 60 bins about 10"x10", $75. Bin unit 87" long, 70" tall, 24" wide. 24 bins 10"x11"x17", 12 each side, with shelf under them. Made from old lumber, $50; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Pipe: 15 pieces of 4" heavy galvanized structural pipe. Could be columns for a tractor shed. $3 per foot or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Plow: #51 on steel, restored, single bottom, rope trip, delivery available; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
Plow: John Deere 680 6-16 pull plow Big beam correct for 830s, needs some work, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Plows: John Deere L plow and John Deer M plow; Les Layton nnn-nnn-nnnn or xxxx@xxxx.xxx (Keizer OR)
Property for sale: Benton County, Washington. Eleven acres, 1725 sq ft mobile home, one 30'x60' four-bay horse barn. One two-story 28'x80' warehouse, RV storage. Consider selling all with 36 ft Gulf Stream motor home. Land is non-farm land as has numerous rock outcroppings. With motor home, asking $450,000. Property has two domestic wells with electric pumps and one septic system. All fenced, along paved roads. Approximately two acres of tillable land for garden or whatever. House has a forever view. Two-car garage attached to house; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Property for sale: La Paz County, Arizona near Bouse AZ. One 10-acre lot with nice storage building, well, septic, some fence. Also one 10-acre lot with well, all lots surveyed. Four 10-acre lots, all surveyed, no service to any of the lots, excellent property for solar use; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Radios: old radios from the 1930s and up. Radiola 60 has tubes, $30. Radiola 17 has tubes, $25. Hickok tube tester, $30. Eight-track layers, $5. Other old radios and testers available; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Road grader: 1920s Caterpillar No. 6 pull type road grader. Nice brass tags, blade is good, wheels and gearing for operating the controls are all in good condition and functional, $5000; Larry nnn-nnn-nnnn (Phelan CA)
Sandblast cabinet, Skat-Blast 46" wide, 60" high, 28" deep, $300; Bob nnn-nnn-nnnn (Rhododendron OR)
Saw blade, 3pt, $100; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Saw blade: five-foot round blade from old saw mill, very heavy duty, $250; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Scoop, old, use or yard art, $100; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Scraper, $200; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Scraper: Letourneau scraper, model LS. Cable scrapers. I have two, $2000 each or $3000 for both; Aaron nnn-nnn-nnnn (Walnut Grove CA) [see photo - not yet paid]
Setting for 6: Gibson Amber Waves pattern John Deere dishes. Issued between 2004 and 2007. Picture of John Deere 730 on each piece. Six each salad plates, dinner plates, soup/cereal bowls, coffee cups. Very light use, no chips. One coffee cup has a crack at bottom of handle, top okay. Very few replacement pieces available. Some pieces available on eBay but are expensive selling separate. Excellent collector pieces or for use, $250; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Orcas Island WA)
Sewing machine: Singer 221 featherweight in original carrying case, real nice; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Sioux Tool Company valve seat grinder, made by Albertson & Company, with about 40 grinding stones and about 20 stem guide insert tools, $300 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Small handheld gas engine 6-volt battery charger all built into one, sold by Montgomery Ward back in the 20s/30s/40era, motor turns over, has original tag on it, $75; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Snow blower to fit on John Deere 214 lawn tractor. Blower has not been used but very little, almost like new, $350; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Snow chains: For big rigs. 3 sets cable chains, new in box for 10:00-20 or 11:00-22.5, $25 per set. New in bags: a set of heavy-duty double railers, real chain with grabber bars, 10:00/20 or 11:00/22.5, $250 set; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Orcas Island WA)
Steel and carbide sharpening machine for saw blades, hole saws, router bits, knives, mill cutter, etc; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Still cleaning up the ranch: Old belt driven hammer mill, best offer. Old military gen set with 4cyl jeep motor. Stuck, best offer. Old platform scale from feed store, best offer. David Bradley (?) hay elevator. Long, best offer; Steve Libra nnn-nnn-nnnn lv msg (Lebanon OR)
Takeuchi Tiger trackhoe, 3 cyl. Yanmar steel tracks, good machine, $9750; Don Chappell nnn-nnn-nnnn (St Helens OR)
Tire: Farm implement tire, 5 rib 6.50 x 16 inches, Allstate brand, photos available, $20; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
Torbensen rear axle. Axle ratio approximately 3.75 to 1. Total overall width 52-3/4 inches. Make offer; Gerald Hilden nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Trash burner stove: antique Frigidaire trash burner in very useable condition; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Utility trailer, dual axles, 15" tires, deck length 16 ft, distance between wheel wells 6'8". Tires weathered, hold air, $500; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Vintage disk plows. These are fairly good size. Would look good behind a Cat 60 or a Best Tracklayer. One missing a tail wheel. Great display or yard art, $500; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Yanmar VIO-35 trackhoe, new engine, 2 buckets with hyd. coupler, blade very nice, $25000; Don Chappell nnn-nnn-nnnn (St Helens OR)