Allis Chalmers B, 1939, parade quality, easy start, good driver, very nice little tractor with no work to be done, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Allis Chalmers B, good condition, $1000; Ed Bring nnn-nnn-nnnn (Molalla OR)
Allis Chalmers WC, have two tractors for parts or to rebuild. Both tractors are fairly complete. Pictures available upon request. Save from the scrap yard. $400 obo for the pair; Kyle Van Vooren nnn-nnn-nnnn (Modesto CA)
Case 800, wide frontend, no wheels, make offer; Dan Casale nnn-nnn-nnnn (Denair CA)
Case DO, 1951, sn 5524957, engine apart but all there, have complete other engine for tractor, best offer; Matt nnn-nnn-nnnn (Denair CA) [see photos]
Case R industrial, $650 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)
Case R, sn 4230575, $650 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)
Case S front axle assembly: axle, wheels, drag link, wishbone, $125; Buck nnn-nnn-nnnn (Greenville IL)
Case SC tractor, recent barn find, always stored under cover. Very complete, missing only air cleaner body, engine runs, and tractor drives in all gears, reduced to $750. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
Case VAI, straight sheet metal, hasn't run for years, rebuilt cylinder head, $500 obo; Fred Buldhaupt nnn-nnn-nnnn (South Prairie WA)
Case wide tread with two sets of wheels, one steel and one rubber, $4700; Dave nnn-nnn-nnnn (Boring OR)
Caterpillar 10 parts, 20 radiator and some parts, few 30 parts; Buck nnn-nnn-nnnn (Greenville IL)
Caterpillar 22, runs and drives, needs valve job, $2000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Caterpillar D2 Model 5J, with 6-foot hydraulic blade, good pins and bushing, has PTO, been sitting for two years, previous owner stated it ran good when he quit using due to his health. I never had running, oldie but goodie here, as is, $2400; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Caterpillar D-353, spacer plate engine, currently set up as a power unit, complete radiator through power take off. Will also fit D-9G and D-9H tractors and marine applications. Excellent running engine, $11000; Mike nnn-nnn-nnnn or xxxx@xxxx.xxx for photos or video (Prineville OR)
Caterpillar NOS Ensign needle valves, $180 each; Buck nnn-nnn-nnnn (Greenville IL)
Caterpillar RD4 with hydraulic front blade and rear BG hydraulic pump with 3-4 cubic yard rubber-tired pull scraper. Overhauled engine and have books for Cat, $3500; Bill nnn-nnn-nnnn (Bayside CA)
Clamp-on duals: two 12x24. One with no tire, one with 14 x 24 tire (40% good). Set $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Cletrac W radiator, $300. Some engine parts; Buck nnn-nnn-nnnn (Greenville IL)
Co-ops for sale, have two, Number 2 and Number 3, dated 1937, $1000 for both; Gerald nnn-nnn-nnnn (North Idaho)
Cylinder head for International 6-cylinder 236 cubic inch diesel engine from 460 Farmall, $180 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Farmall 340, 1958 with 1908 original hours. New front tires, rear tires 80% with no calcium. Torque amp works perfect. Engine starts easy and runs great. Has two-point hitch, not attached. Has Farmall swinging drawbar set up for pulling. Has Por-15 coating in gas tank with non-ethanol gas. Two remote hydraulics. New seat, new battery box, working lights, price reduced to $2300. Local delivery possible; Gordy nnn-nnn-nnnn (Aurora OR) photo in November 2017 issue
Farmall A Industrial with stuck motor, very good condition for its age, good sheet metal, complete except for generator. I believe its a 48 model, has good serial tag, make reasonable offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Farmall A, 1939, FAA795, good rubber, original condition, $1900; nnn-nnn-nnnn (Placerville CA)
Farmall AV, 1947. This tractor runs very good. Has electric start, working headlights, new battery, almost new front tires. The steering is good, clutch and brakes work fine. Its sits on 42 rears, but I have a pair of 36 rears for it if you want. It will be at the Turlock, CA swap meet on March 11/12 if you want to come, test drive it, and take it home, $1850. Call or text Bob Currie nnn-nnn-nnnn (Greenwood CA)
Farmall AV, 1948, restored parade quality, great rubber, no work to do, runs well, $5000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Farmall Cub Lo-Boy, 1948, sn 6582-10566, with mounted International 1000 loader, has new rear tires, front tires are excellent, weights in hand. Cub has all rebuilt quick-tatch hitch primed and mounted, one bottom plow, homemade 3pt attachment, belt pulley gear box attachment for belt work. Has new bench style seat, rebuilt mag, new headlights. Paint is good, no rust. 1000 loader is collector piece and in excellent shape, protective white paint. Everything works. Bucket is in excellent shape also, no dents or bends. 3 chain hooks on back side and hole on front edge of bucket for pin or hitch ball. Have all manuals for both pieces, plus info on attachments. Tractor runs, $3500; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)
Farmall Cub Lo-Boy, runs great, in very good mechanical condition, sheet metal very good, ready for you to paint it. Price reduced to $2400. Email for photos, YouTube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
Farmall Cub parts: Four 6-volt flat back lights, good condition, needs rebuilt, $5 each. New rear mount step, $25. New undercarriage mount bar, (for blade?), $30; Cub Lo-Boy standard seat mount, $25, or all for $50; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)
Farmall Cub, 1948, not restored but very nice. Very good rubber, easy start and drives nicely. Too many tractors and need to reduce inventory, $2750; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Farmall Cub, 1948. Perfect running Cub. Tires are in excellent shape. 6-volt system with a 12-volt battery. Does not have any running lights of any kind. Starts right up and ready to go. Has had complete brake work and carb work. Does not leak gas. Runs very smooth. Draw bar with hitch. Tin work is in real good condition, paint would put it parade ready, $1800; Murray nnn-nnn-nnnn (Lebanon OR)
Farmall F-12, 1936, older restoration, excellent condition, show ready, electric start, tires in decent shape, $2750; Daryl Klein nnn-nnn-nnnn (Deming WA)
Farmall M, 1951, single front. Good tires on rear. Most sheet metal and duplicate parts. Runs but needs radiator work. Located 38 miles north of Bakersfield. Call or email for pics and price; Ray nnn-nnn-nnnn or xxxx@xxxx.xxx (Terra Bella CA)
Farmall M, dual front wheels, engine stuck, have good engine to go with, $450; Richard Parker nnn-nnn-nnnn (Lind WA)
Farmall M, older restoration, runs well, good to excellent rubber, nice tractor, $2400; Jack Hasser nnn-nnn-nnnn (Phelan CA)
Farmall Super C, 1954, narrow front, sn 197715J. Very good tires, fast hitch, IH wind breaker, IH umbrella, two plows, one 2-bottom, one 1-bottom. Very nice running tractor, fast hitch drawbar, great paint; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C, 1954, wide front, sn195954J with Case loader, very good tires, fast hitch, recent paint, decals. Excellent running; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C, with 8-foot belly mounted grader blade, tool bar, cultivator, 3 pt adapter, rippers, utility box, new tires, chains for rear tires, always garaged, $4500 obo; Bill Littlefield nnn-nnn-nnnn (Eagle Point OR)
Ford 2N, fair tires, nice metal & paint, runs good, $1200; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)
Ford 740, 1955, fully restored, power steering, Howard low range, Rest-O-Ride seat, $4800; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)
Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 8N engine. Good parts, except pistons and crank, $150; Frank nnn-nnn-nnnn (Manning OR)
Ford 8N front distributor. Just spent $425 on new brakes and seals and a tranny bearing. Gears still a bit noisy. Mechanic said rust on gears from rain leaking through boot on gearshift, but should quiet down with some running. Very nice metal and paint, fair tires and a strong engine. All new lube, $1800; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)
Ford 8N front wheel weights for 16" wheels, $100; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)
Ford 8N items: 8N motor, 1947, sn 8N23451. Runs, good OP, head and flywheel machined. Has new water pump and manifold. Starter and generator checked out. Carb & distributor rebuilt. Needs rear main seal, $450. Will sell bare motor for $150. 8N Ford wheel with good Alliance 11.2x28 tire, $250. Heavy duty run stand setup for 8N motors, also has Chevrolet adapter, includes radiator, $300. Have many new and used 8N parts including a belt pulley. What do you need?; Rick Murray nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Ford 8N rear wheel weights, $100 pr; nnn-nnn-nnnn (Placerville CA)
Ford 8N restored, original rubber, newer paint, lights, front bumper, sn177, $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 9N front wheel weights, $100 pair. Early brake pedals, same both sides, $100 pair. Rear wheels, $100 each; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)
Ford 9N. Not sure of the year. Not running and tires are junk. Use as parts or restore. Enough on the negative, heres the positive: Front axle extensions have grease zerks in front, rear axle housings have solid mounts for fenders, fenders in good condition are double ribbed, rear wheels are 32x8, front and rear wheel weights, hood is in fair condition and takes snap in battery cover and has narrow top rib, $750; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Four 8.3x24 eight-lug, 3-1/4 spacing 6" center hub, 80% wear left, $250; Ed Bring nnn-nnn-nnnn (Molalla OR)
FREE: Two 13.6 X 26 tires with fair rubber; Dave nnn-nnn-nnnn (Boring OR)
Graham Bradley row crop, 1938. New tires, $6000/offer; Jim nnn-nnn-nnnn eves (Yorkville CA)
Harris with 4-wheel drive, Power Horse, $3,500 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Hood: fits John Deere D, 1941, may fit others, $50; Hubert Bierly nnn-nnn-nnnn (Bend OR)
International 3414 diesel backhoe. Shuttle trans broken, engine ran when parked but fuel injectors need work. Has good front loader. Backhoe is worn but still works and could easily be adapted to something else. Fairly new hydraulic pump and rebuilt starter. Useable rubber, $1200 or trades for motorcycles, scooters, sidecars, Oliver HGs; Ken nnn-nnn-nnnn (Goldendale WA)
International 414, no motor, good for parts or replace motor with something interesting (make hotrod?). Could be 3414 parts, $300 or trades; Ken nnn-nnn-nnnn (Goldendale WA)
International 460 utility tractor with 282 cid diesel engine, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International Farmall 460 with front loader. New front tires, rears good, $1500 firm; Ed Bring 503 829-8528 (Molalla OR)
International TD-6 Series B injection pump, rebuilt & calibrated, $450 plus freight; Wes Allen nnn-nnn-nnnn or xxxx@xxxx.xxx (Live Oak CA)
International TD-6, sn TDBK24822T7, wide track, $650 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)
International TD-6, sn TDBK7602T7, wide track, $650 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)
International TD9 dozer, parting out, 282 diesel starts and runs decent, left side final problem, Carco winch, tracks are sold; Fred Buldhaupt nnn-nnn-nnnn (South Prairie WA)
John Deere 2-cylinder crawler parts, misc parts, starters, manifolds, air cleaners, cast iron bumper, MC stamped pads, lots of misc; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 40 crawler with very good undercarriage, has Garwood winch, nice factory blade, ROPS. Crawler has sat for many years, would make nice restoration or fix up and use, not running, $2700 as is, can load and/or ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 4020, rod spun, $2500; Richard Parker nnn-nnn-nnnn (Lind WA)
John Deere 420, excellent shape, $3200; call or text Jim Koontz nnn-nnn-nnnn (Ducor CA)
John Deere 420U, 1957, sn 106102, restored, wide front, 4 speed, PTO. Runs and drives well, new tires on front, 80-90% rear. Rear wheel weights, new brakes, 3pt with correct 3rd link. Four-year-old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork. With restored 415-A 3pt integral (2-14 bottom) plow. New Tyler Bucheit points, extension and trash boards. Bottoms are soft painted when not in use, nice original set up, everything works, $5000 firm; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)
John Deere 430 Utility, 1958: When I bought this low-hours tractor in 1995 it had 1250 hours on the meter, it now shows 1536 hours. It starts right up, runs great and has never used any oil. Minor sheet metal damage to grill and lower nose, no dents anywhere else. In the years I have had it I replaced the water pump and front tires. I changed all seals and bearings in the transmission and differential total about $1500. I rebuilt the 3-point unit and the hydraulic pump. I replaced the clutch. This is a 5-speed tractor with live PTO. Rear tires are 12x24 and have lots of tread left. Fronts were new about 5 years ago. Great tractor to use as is or perfect for a show quality restoration, $6000; Jim Temple nnn-nnn-nnnn (Noti OR)
John Deere 430: When I bought this low hours tractor in 1995 it had 1250 hours on the meter, it now shows 1536 hours. It starts right up, runs great and has never used any oil. Minor sheet metal damage to grill and lower nose, no dents anywhere else. In the years I have had it I replaced the water pump and front tires. I changed all seals and bearings in the transmission and differential total about $1500. I rebuilt the 3-point unit and the hydraulic pump. I replaced the clutch. This is a 5-speed tractor with live PTO. Rear tires are 12x24 and have lots of tread left. Fronts were new about 5 years ago. Great tractor to use as is or perfect for a show quality restoration, $6000; Jim Temple nnn-nnn-nnnn (Noti OR)
John Deere 440I wheel tractor, just parted out and on the shelf, most parts available, many are the same as 420 and 430 models. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
John Deere 50, 1953. Original paint, good tires, one set of rear weights, $2500 obo; Kent nnn-nnn-nnnn (McCleary WA)
John Deere 530, wide front end, runs and looks good, $2340 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 60, 1953, runs, new tires, paint, standard, low seat, $7000; Marlen Knutson nnn-nnn-nnnn (Bow WA)
John Deere 60, narrow front tires with roll-o-matic. Also has 42" rear tires, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere A, 1945, sn 558541, tricycle, styled, restored, rebuilt engine, new gauges, new wiring, electric start, starts and runs good, professionally painted, invested $9000, asking $4000 obo; Bill Littlefield nnn-nnn-nnnn (Eagle Point OR)
John Deere AO unstyled, good tag, 1947. Sheet metal thin, not stuck; Fred Buldhaupt nnn-nnn-nnnn (South Prairie WA)
John Deere AOS new reproduction hood, $525. Also have other AOS parts, call for list; Dave nnn-nnn-nnnn (Boring OR)
John Deere AR, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere B, 1938 long frame, rebuilt engine spokes on rear, runs good, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1941. Runs, older restore, new wheels & tires, live hydraulics, delivery available; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
John Deere B, 1943, hand start, repainted, parade ready, good tires, $2300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere BO/BR. Brand new, reproduction, 18-gauge fenders made by B. Lefever in PA. They fit serial #327,160 and up. They have surface rust from sitting in my shed for 13 years and they have never been put on the tractor. Pictures available, $260; Bob Currie (email, text, or call) Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)
John Deere cast iron front end support closed bottom for styled model B years 1943 to 1945. Used during the war years. Good condition, $100. Also have 3 other angle iron front supports and a press steel frame front support, $50 each. Photos available. Will be at WHEAT swap meet; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere cast wheel centers for model D styled and unstyled. Casting #D2570R. For 28" rubber. Good condition, good splines. I don't see any cracks, $200/pair. Photos available. Will be at WHEAT swap meet; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere cast wheel centers for styled models A and B. Set #1: Casting number A3402R for 42" rubber fits AN/AW or BN/BW bolt in hub style good condition. I don't see any cracks 15 spline hubs included $400/pair. Set #2: casting numbers A3419R for 38" rubber. These centers are correct for the real late-styled A and B tractors. They have the 4 slot holes for wheel weights and the 4 round holes as well. Some of the earlier centers only had the 4 slot holes. Bolt in hub style. Good condition; I don't see any cracks $200/pair. Photos available. Will be at WHEAT swap meet; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere D, 1945, stuck but complete to go to good home, $1250 obo. Come look, make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere D, 1949, excellent tires, electric start, body in great shape, right hand housing gasket leaks, $5000; Marlen Knutson nnn-nnn-nnnn (Bow WA)
John Deere GP Orchard, 1931, sn 15027. Restored, runs and looks great, $10500; Mark nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)
John Deere H mushroom front wheel weights, $400 pr; nnn-nnn-nnnn (Placerville CA)
John Deere H, parade ready, $3500; call or text Jim Koontz nnn-nnn-nnnn (Ducor CA)
John Deere H, starts easy, new pistons & valves, runs good, with a 4-row cultivator, $3500; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere Lindeman BO crawler, 1943, overhauled engine, $6000; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d Alene ID)
John Deere M, 1951. Good rear tires. Very good original condition, complete, starts easily, and runs and drives well. Very good sheet metal, unmodified front end, working hydraulics, $2900. Email for photos, YouTube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
John Deere M, excellent shape, $2800; call or text Jim Koontz nnn-nnn-nnnn (Ducor CA)
John Deere MT with two front ends plus an attached cultivator, $2500; Dave nnn-nnn-nnnn (Boring OR)
John Deere NOS clutch pulley, A17R, $250. NOS JD 3-way fuel valves, $200 each. NOS JD GP Ensign needle valves, $180 each; Buck nnn-nnn-nnnn (Greenville IL)
John Deere R, 1953, nicely restored, new tires, nice paint. Ran it last three years in parades. Strong runner, to use or show, $6000. Will take guns on deal. May deliver for price; Dan nnn-nnn-nnnn or cell nnn-nnn-nnnn (Lander WY)
John Deere two-cylinder radiators. Top tank casting numbers: B758R, unstyled BO and BR with fan shroud top tank rusted through. B2602R, late styled B with shutters. B1802R, styled B s/n 96000-148499 with shutters and shroud, small hole in bottom tank. B3566R 520/530 with fan shroud. F864R, late styled G pressure cooling system non-water pump bottom tank. F3122R, 70/720/730 gas or diesel. All radiators have not been leak checked. $100 each obo. Photos available. Will be at WHEAT swap meet; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
Massey Ferguson 65, new battery, rebuilt carb, good rubber, runs great, $2900 obo; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Somis CA)
Massey Ferguson quick-change belt pulley attachment, very unusual, $250; Buck nnn-nnn-nnnn (Greenville IL)
McCormick OS4, 1948, restored condition, easy start, good driver; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Mini Crawler Agritrac with hydraulic blade which angles and rare backhoe, has two-cylinder gas engine, crawler is in very nice shape, this machine is very rare, has original tag, has been sitting for many years in dry barn, would make great restoration or fix up and use. Weighs around a ton and half. This machine would be an eye catcher at tractor shows. Have lots of pics, can ship. As is, $6500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Minneapolis Moline 445 Universal, gas, 1956, 38 hp, 13.6-38 rears, 16 fronts, 2 remotes, 3-point, 540 rpm PTO, good running condition, $3200. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline G1000 diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals, $3750. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline GVI, diesel, 1960, 68 hp, 23.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9 ft Cancade hydraulic, two-way, front blade, $3750. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline radiator and front nose. Missing screen but nose is in excellent condition, no dents or dings. Includes old radiator core. Unsure which model it fits but looks like RTU or ZTU. $100. Photos available. Will be at WHEAT swap meet; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
Minneapolis Moline rear wheel weights, $50 ea; nnn-nnn-nnnn (Placerville CA)
Minneapolis Moline ZAN parts, some still left, no engine parts available. Call with needs, very reasonable prices; Chuck Barker nnn-nnn-nnnn, lv msg (Albany OR)
Minneapolis Moline ZTS, 1946, good rubber, paint fair, $2800; nnn-nnn-nnnn (Placerville CA)
Oliver 77 RC, 1949, engine stuck, wide front, pto. No grille, good hood & fenders, $400 or trades; Ken nnn-nnn-nnnn (Goldendale WA)
Oliver 80, Wheatland tractor, $1400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Oliver OC3, Cletrac HG crawler parts, lots of starters, magnetos, some rebuilt, also have clutches, pressure plates, foot rests, rollers, oil pan, very heavy-duty steel grille guard factory made, lots of other misc. parts. Can send pics; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Parting out Massey 65 gas tractor, good engine. Also Deutz 4005 and Allis Monarch 35 crawler; Buck nnn-nnn-nnnn (Greenville IL)
Power Horse, Model A20, 1938. Made in Salt Lake City, UT, $7900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Radiator for Allis Chalmers M, $100; Ernest Walker nnn-nnn-nnnn (Klamath Falls OR)
Reproduction fender for Ford N series tractor, $65; nnn-nnn-nnnn (Placerville CA)
Rims, 38 for Oliver 88, have two, $100; Ernest Walker nnn-nnn-nnnn (Klamath Falls OR)
Rims: two John Deere 12 x 36. Type: 2-rib rims. With tires (10% - 20% good). $100 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Rollers: two really nice rollers for MC crawler; Fred Buldhaupt nnn-nnn-nnnn (South Prairie WA)
Tire: 14.9x38 lug type tractor tire, $25; Jack Davis nnn-nnn-nnnn (Winlock WA)
Tires and wheels for Farmall tractors, H thru 400. Call or email for pics and prices; Ray nnn-nnn-nnnn or xxxx@xxxx.xxx (Terra Bella CA)
Tires: 11.2x28, two new at $125 each, two at 70% for $50 each. Two 5:50x16, $20 each. Two 6:00x16, $20 each; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)
Tires: Rear tractor tire,10 x 24 inches, $15. Two rear tractor tires, 12.4 x 24 inches, $15 each. Front tractor tire, 3-rib, 7.5 x 16 inches, 8-ply, $20. Photos available; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
Tractors: Parting out Farmall H, Farmall F-12, John Deere late styled B. If no answer, leave message!; John Bold Jr nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)
Wheel weights. Aftermarket for John Deere approximately 800lbs each. Casting BW705, have 2 weights, $75 each or $125 for the pair. Will be at WHEAT swap meet. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
Wheel weights: AM 2337T front and AM 2332T front, fit John Deere 40, $250 pair. M2332T 40 front, $100. M3240T 420-430 front, $100. M1838, not sure what it fits, $50; Vern nnn-nnn-nnnn or nnn-nnn-nnnn (cell) (Exeter CA)