June 2018 - Engines & Parts For Sale

All Classified Ads

Allman model engine by DeBolt, nice quality machining, pick up only,$1800; Mark Bruto nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)

Alpha De Laval 3 hp with rotary magneto. Runs great, barn fresh engine, complete less oiler, $700. 2-1/2 hp Alamo hit and miss engine, complete engine, including Webster magneto and Webster bracket, all painted, but 70% apart, $500; Craig Mathews nnn-nnn-nnnn (Northridge CA)

CH&E 5 hp on cart, $1400; Dennis Chaney nnn-nnn-nnnn (Dayton NV)

Delaval 1-1/2 hp Type F, $600; Dennis Chaney nnn-nnn-nnnn (Dayton NV)

EK Hercules 5 hp, 246004, complete, was in fire, $200; Jose nnn-nnn-nnnn (Rosemead CA)

Fairbanks 1-1/2 hp, hopper condenser cooler. Needs work, stuck, $225 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks Morse 10 hp Cannon barrel type on cart, $3500. Fairbanks Morse 2 hp Eclipse with hacksaw, $1400. Fairbanks Morse 1 hp Eclipse with water pump, $1200. Fairbanks Morse 1 hp Eclipse on skids, $950. Fairbanks Morse 1 hp headless type, $850. Fairbanks Morse 1-1/2 hp Model Z, $500; Dennis Chaney nnn-nnn-nnnn (Dayton NV)

Fairbanks Morse 6 hp engine, $200; Brock Field, nnn-nnn-nnnn (Pe Ell WA)

Fairbanks Morse N 15 hp cylinder, needs to be sleeved, $400; David Turner nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)

Fairbanks Morse Z 6 hp, project or parts, mostly there, $200; Brock Field nnn-nnn-nnnn (Pe Ell WA)

Fairbanks Morse Z styled, 2 hp, on home made cart. Ran 3 years ago has been stored under cover since. Can email photos, $450; Jack Maki nnn-nnn-nnnn (Colville WA)

Fairbanks Morse Z, 3 hp, comes with cart, older restoration that was started 3 years ago. Runs and looks good. Stored inside and prepped for storage. $700 obo; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

Fairbanks Morse, 1 cylinder, model 31, Borneo engine, 5x6-1/4, parts engine, $100; Jose nnn-nnn-nnnn (Rosemead CA)

Fairbanks Morse, headless, 1-1/2 hp, complete with spare block, $350; Jose nnn-nnn-nnnn (Rosemead CA)

Fuller & Johnson Farm Pump engine parts, 1914 engine, SN 38555, all the parts appear to be in excellent condition, all have been cleaned and painted, head, cylinder, rocker arm, valves, muffler, crank, case, piston (no rings), connecting rod, hold out latch, push rod, and flywheel. 2 fuel tanks in very poor condition, selling as a unit, will send photos on request, $200; David Wirth, nnn-nnn-nnnn (Walla Walla WA)

Fuller and Johnson NB, 1-1/2 hp, in a continuous style mixer, $200; Jose nnn-nnn-nnnn (Rosemead CA)

International 135 engine, has clutch, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

International M, 6 hp, parts, no head or related parts; Mark Bruto nnn-nnn-nnnn

IXB5 Hercules with clutch and starter, $200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

John Deere 3 hp E, $1050 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Julien 5 hp, beautifully restoration, runs great, no cracks etc. Can help with shipping or delivery, email for photos, $6000; Dale Fye nnn-nnn-nnnn (Shelton WA)

Kohler light plant engines, 2 available, one is flathead other is overhead valve, think they would run but have not tried to start them, both turn over, would take $100 for both; Jerry Bird nnn-nnn-nnnn (John Day OR)

Little Woodsman drag saw, 3 available, 1 extra engine, some spare parts, 2 blades 5 feet and 6 feet long, not running, $550; Dale Bybee nnn-nnn-nnnn (Acton CA)

Misc engine parts, Briggs, Clinton, Wisconsin, older air-cooled engine parts, $25 for the entire pallet; Angela nnn-nnn-nnnn (Hillsboro OR)

Novo 1-1/2 hp engine, has new connecting rod and rings, valve ground, runs good. On nice oak 4 wheel cart, combined with a Marvel draw cut saw #1 power hack saw with new extra blades. Has an electric portable battery powered starter that can be used on other engines, $1125; Bob Johnson nnn-nnn-nnnn (Cedarville CA)

Novo 2 hp, hit and miss, complete good compression, $400; Jose nnn-nnn-nnnn (Rosemead CA)

Novo 3 hp with air compressor on cart, $1200; Dennis Chaney nnn-nnn-nnnn (Dayton NV)

Stover vertical, MV-2 complete with gear box, $800. Restored Fairbanks Morse, 6 hp, nice runner, $1000. International M, 3 hp, older restoration, $800. 1-1/2 hp M, $700. Stover CT-2 with Rex mixer, mixer has 5 brass tags, $800. Mogul, 1 hp, parts engine, $80. Unknown hopper/dry head $60. Fairbanks Morse D, $350; Dale Bybee nnn-nnn-nnnn (Acton CA)

Stover, 10 hp, tank cooled, #H36844, manufactured 1912, 45 in flywheels, good condition and runs well, mounted on 2 axle unlicensed trailer, $10000; Smoke Stover nnn-nnn-nnnn or xxxx@xxxx.xxx (Sacramento CA)

Waterloo Boy 2-3/4 hp on cart, $1800; Dennis Chaney nnn-nnn-nnnn (Dayton NV)

Wisconsin AH engine, turns freely, complete, has spark, $200; Mark Bruto nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)

Wisconsin V4, stuck. Electric start, $90 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wisconsin V4. Ran when it was put in storage, $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wisconsin, V4 from hay baler with clutch and starter, $300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Witte 2 hp, headless hit and miss, complete, no mag, $350; Jose nnn-nnn-nnnn (Rosemead CA)

Witte 2-1/2 hp, throttled governed, in Essicks cement mixer, $200 obo; Jose nnn-nnn-nnnn (Rosemead CA)