Agricat mini crawler built in the 1950’s in California, comes with hydraulic blade and backhoe, two cylinder gas engine, starts, runs and operates well, backhoe works great. Needs some maintenance such as belts, etc, but very nice machine, $6900 or reasonable offer; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)
Allis Chalmers G, 1948, $2000; Tom Randall nnn-nnn-nnnn or xxxx@xxxx.xxx (Fiddletown CA)
Allis Chalmers G, 1952, SN 25584. It has been well cared for and is in good condition. Recently tuned up, has a new battery and rear tire. Comes with a manually operated three pronged underbelly cultivator. Asking $3750; Gregg Novonty nnn-nnn-nnnn (Grass Valley CA)
Allis Chalmers Monark 35 or K being parted out; Buck Evans nnn-nnn-nnnn (Greenville IL)
Allis Chalmers RC, 1939, older restoration, very rare, runs good, good tires, pictures on request, $2500 obo; Stuart Wade nnn-nnn-nnnn no texts please (Chico CA)
Allis Chalmers WD, SN WD344477PA, runs, complete, tin work good, paint not so good, tires good tread but weathered, $1200. AC B, SN CE90677, engine stuck, tin work complete but fair, missing steering wheel, tires fair and weathered, $400. $1500 for both; Don Newton nnn-nnn-nnnn (San Miguel CA)
Case 450 dozer, rippers, with 6 way blade, almost new undercarriage, very good original paint, new rods, mains and seals, zero hours on rebuild, $12500; Don Chappell nnn-nnn-nnnn (St Helens OR)
Case C, 1936, very straight and complete, engine loose, not running, needs rear tires, can send pictures, $800; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case C, S or R F&H hc245, rear round spoke wheels 9x24, $300. Case S, C, D parts. DC-4 with heart shaped front end hand clutch, live PTO, hydraulics and Eagle hitch, runs needs some tinkering, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case Crossmotor, not running; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)
Case DI, 1948, dual rear wheels, SN 5219520, $400 obo; Sprueill nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Center CA)
Case tractor parts. Several engines and parts for VA, S, D, LA, 300s, 400, Racine and others. Lots of used engine parts and fenders for most and sheet metal for most models. Rims and tires too. Whole tractors including C, CO and CCs, VAO with orchard fenders, big 400s and others. Several radiators, engine blocks, you name it for 830s, 930s, western specials (complete tractors). 45 years of collecting, call for needs and more information; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)
Case VAC 1951, runs and drives, wide adjustable front axle, very straight sheet metal, Eagle hitch, rear tires 95% plus, gas tank clean, needs a paint job, can send pictures, $1500 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VAH, 1947, high crop, SN 5166145, $400; Sprueill nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Center CA)
Caterpillar 10 and 20 parts, also some 30 parts. Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 15, 1930 PV series tractor, not running, cylinder head is loose, engine is not stuck, fair undercarriage, brand new seat cushion. Nice project tractor, asking $750 obo; Tim Morris nnn-nnn-nnnn (Napa CA)
Caterpillar 22 1J WSP, wide pad, runs and drives, needs valve job, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Caterpillar 22, crawler, not running; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)
Caterpillar 30 for parts or restoration, good track chain; Gene Struckle nnn-nnn-nnnn (Davenport WA)
Caterpillar D2s, SN 1145 and 10820, one runs other for parts, $1200; Sam nnn-nnn-nnnn (Bickleton WA)
Caterpillar D2s, SN 1145 and 10820, one runs other for parts, $1200; Sam nnn-nnn-nnnn (Bickleton WA)
Caterpillar D4 2T series, Caterpillar hydraulics, Wallace angle dozer blade, runs $2250; Sam Berk nnn-nnn-nnnn (Bickleton WA)
Chrysler Industrial 6-cylinder flat-head engine from old combine. Ran when it was put in storage, $180 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Cletrac W radiator and head; Buck Evans nnn-nnn-nnnn (Greenville IL)
Cockshutt 20, rare single front wheel, not running; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)
Co-op No. 2, 1936. This is a sweaty, old original tractor. Runs great, has new tires and the tin is excellent. Great for restoration or love it the way it is, $2350 obo; Mike Brenneman nnn-nnn-nnnn (Scio OR)
Cylinder head for International 6-cylinder 236 cubic inch diesel engine from 460 Farmall, $180 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Danhauser 7 foot blade, heavy duty, has 3-pt, also 2-pt hitch adapter, $200; Al nnn-nnn-nnnn (Elko NV)
Duals: two clamp-on duals. 12”x24”. One with no tire, one with 14” x 24” tire (40% good). Set $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Earthmaster Model C, 1948, N62 Continental engine, good front and rear tires, 80% engine and hydraulics overhauled, new carb and gear oil, very nice show tractor, runs good, stored inside, $2100 obo; M. Beld nnn-nnn-nnnn evenings or xxxx@xxxx.xxx (Lynden, WA)
Farmall A chassis on rubber, no tin and missing parts. Believed to be produced in 1943, sources show no production in 1943, but believe IH data book showed around 150 tractors, A’s built in 1943. Could be wrong and please correct me if I am. Serial number FAA91132, best offer; Burle Rogers nnn-nnn-nnnn (Sonora CA)
Farmall A, have 2, one to get running, was in shed for 30 years, ran when parked, engine turns, SN AA59005, second A for parts, SN 100806, $750 for both; Art Keyes nnn-nnn-nnnn call 9AM to noon (Toledo WA)
Farmall Cub Lo-Boy parts tractor, $750; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Cub Lo-Boy with nice loader and tiller. Ag tires and wheels available, very nice tractor; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Cub, starts and runs well, sheet metal excellent, good tires, wheel weights front and rear, sickle mower and spring tooth, $2000; Don Eckelberry nnn-nnn-nnnn (Noxon MT)
Farmall Cubs, 1947 and 1948, one with belly mower, one with blade and plow. Ready to work or restore, $3250 for both. Pictures upon inquiry; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
Farmall F12, 1936, runs well, older restoration, looks great, good paint, tires good tread, but fair rubber, electric start, works great, $1800; Daryl nnn-nnn-nnnn (Deming WA)
Farmall F-14, 1938, runs well, on steel wheels, good paint, good condition, $2350; Dennis Leischner nnn-nnn-nnnn (Damascus OR)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall H, 1940, rebuilt starter, new plugs and wires, front homemade bucket; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)
Farmall M parts tractor, $300 obo; Sprueill nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Center CA)
Farmall M, 1942 wide front, engine is stuck, tractor looks complete and is on fair rubber, includes extra set of rear rims, reduced to $600. Open to trades, especially for Ferguson implements. Needs to go. You get a free tour of our other equipment, ice water and help loading, usually all hours; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Farmall sheet metal, from A to 450 plus miscellaneous parts. Super M motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super C Fast Hitch to 3 point conversion, 2 prongs and 3rd link with adapter, call for pics; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C flat belt pulley with gear and mounting; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C with 9 implements. Tractor is beautifully restored. 4 new tires, full fast hitch, all implements are fast hitch, $4600; Wayne Schuh nnn-nnn-nnnn (Mount Vernon WA)
Farmall Super C, 1954, sn 197715J. Narrow front, excellent rubber, fast hitch with two plows, (C-20 2B and 20” one-bottom). IHC windbreaker, umbrella, excellent running; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C, 1954, SN195954J. Comes with Case loader, live hydraulics, Fast Hitch, very good rubber, excellent running; Al nnn-nnn-nnnn (Elko NV)
Farmall Super Ms, one wide front and one narrow front, 4 implements, engines have been rebuilt on one, new rings, head on the other, $2500-$3000 depending on implements wanted; Wayne Schuh nnn-nnn-nnnn (Mount Vernon WA)
Farmall Tractors: 1940 H, new tires, extended wide front end, running condition. 1968 Cub Low Boy 154, running condition, good turf tires, 3-pt hydraulic lift, custom front metal grille. 1950’s Cub Low Boy, not sure of year, needs TLC, tires fair. 1947 Farmall B, 3 wheels, new tires, 2 row cultivator, running condition; Bill nnn-nnn-nnnn (Covelo CA)
Farmhand loader F11, new seals in the cylinder, repaired and repainted, $1500; Sam nnn-nnn-nnnn (Bickleton WA)
Ferguson TO-30, 1953, comes with 1960’s Wagner step through loader, runs great, tires really good, 12V conversion with electronic ignition. Selling for a friend, owner relocated to Texas. Comes with 800 lb counterweight and 5 foot scraper blade, $3500; Steve Fromhold nnn-nnn-nnnn (Graham WA)
Ford 2N, 1943, painted sheet metal, very good tires, recent carburetor work, very rare war years manufactured, $2750 obo, pics upon inquiry; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 800, $350 obo; Sprueill nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Center CA)
Ford 9N steel rear lugged rear wheels. Make offer; Owen Arnett nnn-nnn-nnnn (Nampa ID)
Ford BNO 40 (Ford Ferguson aircraft tug), chassis and parts for sale/trade. Parts include chassis, engine block with transmission and front axle, subframe with front grille, asking $650 for all; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford N parts: 1- 75L-15SL 8 ply tire with tube, 80%. 2- OEM 28 inch rear rims, very good. 4- 19 inch front wheels and tires. 2- non-script fenders with brackets, excellent. 1- tool box, fender mount. 1- fuel tank, solid. 2- running boards with mounting hardware, excellent. 1- battery holder for 8N. 2- starters. 1- generator. 1- late 8N steering gear. 1- PTO shaft. 1- trans to clutch shaft. 1- Marvel Schebler TXS-241B carburetor. 1- side mount distributor. Several 6v lights. 1- front axle assembly complete with hubs and radius rods for 8N. 1- steel flat belt pulley. Several misc. electrical parts and gauges. Call for prices. Will make a good deal if you take everything; Lee nnn-nnn-nnnn (Crawfordsville OR)
Fordson tractor, 1923, complete with fenders and PTO, $500; Jose nnn-nnn-nnnn (Rosemead CA)
Fuel Injection Pumps, International TD6, rebuilt, calibrated. TD40 unknown condition. Excello 6 cylinder, unknown condition. FREE before they go to scrap. Pickup only; Wes Allen nnn-nnn-nnnn or xxxx@xxxx.xxx (Yuba City CA)
Harris with 4-wheel drive, Power Horse, $3500 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Hydraulic cylinder, Lion brand, 2 in bore, 10 in stroke, used once, like new, pics available; Al nnn-nnn-nnnn (Elko NV)
Hydraulic straight tilt blade, possibly Holt, everything there but hydraulic on tractor, fits TD9-D4, HD5 or 6, $1000; Sam nnn-nnn-nnnn (Bickleton WA)
Hyster double drum winch for Caterpillar 30, $350; Gene Struckle nnn-nnn-nnnn (Davenport WA)
International 400, 1956, wide front, SN 38453-R, needs water pump, $800; Prentiss Sprueill nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Center CA)
International 460 Utility with 282 cid diesel engine, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International Harvester O4 tractor, super narrow, may be vineyard model, fairly complete barn find kept under cover, needs restoration, $600; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
International Skidsteer 3200 Series from the mid seventies, broke a shaft in one of the hydraulic drive pumps and hasn’t run in a few years. Motor is a Wisconsin V4 and does turn over. Have the manuals and extra final housing for this machine. Built heavy duty, very fixable machine. Can load. $1900; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)
International TD6 stock. Few years ago added a hydraulic pump to the PTO and a 15 gallon tank and oil cooler. $2100 FOB Merlin OR; Will Beach nnn-nnn-nnnn or xxxx@xxxx.xxx (Merlin OR)
JD 60 low seat standard, rebuilt engine, rough sheet metal, $2000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
JD 620 LP black dash, runs, on 42 inch rubber with 16 inch single front with 3 pt. no top link. Air stack, new battery box, cables, and seat cushions; Mark Parker nnn-nnn-nnnn (Lebanon OR)
JD 720 gas, black dash, turns over, 42 inch rubber with 16 inch single front with 3 pt. no top link, dual hydraulics, air stack, $2750 each or $5000 for both; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere .090 rebore kit, for early styled B tractors SN 96000-201000, includes pistons, pins and rings, originally purchased from Yesterdays Tractors, $325; Larry nnn-nnn-nnnn (Placerville CA)
John Deere 1010 and 440I wheel tractors, just parted out and on the shelf, most parts available, many are the same as 420 and 430 models. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 1010 crawler, gas engine, reverser, PTO, auxiliary hydraulic valve, 6 way hydraulic blade, runs well, good undercarriage; Wayne nnn-nnn-nnnn (Prineville OR)
John Deere 1931 GP orchard tractor, restored, runs and looks great. SN 15027, $10000; Mark nnn-nnn-nnnn (Creswell OR)
John Deere 420W, starts easily, runs and drives well, in very good mechanical condition. Sheet metal, transmission, wheels and tires are all very good. The hydraulics, three point hitch and PTO work well as they should. Engine was overhauled about 10 years ago and has about 150 hours since rebuild. One big bonus is the factory power steering making it easy to drive. $3900; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 440 IC, manual 6 way blade, $5000; Jerry nnn-nnn-nnnn (Sandy OR)
John Deere 50 and 60 parted out, lots left: crank, head, grille, hood, plus miscellaneous parts, JD 26 inch waffle wheels in great condition, no rust good mounting holes, $400. JD 30 inch wheel cast centers part #F1590R $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 60 for parts or repair, missing carb and clutch assembly, fair tires and tin, engine will turn but has stuck valves, $600 obo, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)
John Deere 60, narrow front tires with roll-o-matic. Also has 42" rear tires, $1800 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 630 row crop with #45 loader converted to hydraulic dump. Brakes done last year and manifold set the year before. This is a low hour tractor, 3500 hours, am the third owner. Second owner bought it in the 1960s and bought from him in 2002. Tractor has power steering, Roll-a-matic and 3 pt. hitch with original top link. Good tires all around and sheet metal is straight except for the battery box rust and dents in grille. Always starts and runs greats, never uses any oil. I’ve used it every year to cut and bale hay as well as any tillage chores around my place. Ready to go to work or make a great restoration, $5500; Jim Temple nnn-nnn-nnnn (Noti OR)
John Deere 820, SN 8200172, 6672 hours, $5000; Jerry nnn-nnn-nnnn (Sandy OR)
John Deere A, 1937, 2 available, not running; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)
John Deere A, 1947, runs great, new paint and tires, $4500 obo; Wes Green nnn-nnn-nnnn (McKinleyville CA)
John Deere A, 1949, tricycle front, SN 641870, $1100 obo; Sprueill nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Center CA)
John Deere AR, $1900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere B parts tractor, 1940s, $300 obo; Sprueill nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Center CA)
John Deere B, 1943, nice paint, hand part, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere B, 1949, very clean, starts quick, fenders and new rubber, pictures on request, $3250 firm; Stuart Wade nnn-nnn-nnnn no text please (Chico CA)
John Deere B, unstyled, factory round spoke rears, fully restored with too much done to list, asking $3950; Tim Morris nnn-nnn-nnnn (Napa CA)
John Deere BN high clearance tractor, 1950, 42 inch tires, starts easily, runs and drives well, appears to be in good mechanical condition. Sheet metal is fair, tires hold air and are usable, hydraulics and PTO work, $1900; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere BN high clearance, complete and working cultivator setup, good hydraulics, very nice tractors, asking $2000 obo; Tim Morris nnn-nnn-nnnn (Napa CA)
John Deere BO Lindeman, 1943, overhauled engine, $5500; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’Alene ID)
John Deere Bs, 1950 restored B, $4500. 1943 BN, 80% restored, all there, new front tire. Both have new rear tires but are weathered, will make a deal on both. Call for more information; Dale Bybee nnn-nnn-nnnn or xxxx@xxxx.xxx (Acton CA)
John Deere BW, 1948, mostly complete, wide front is in fair shape, right hand tie rod is broken, 42 inch rear wheels/tires, engine stuck, $900 obo, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)
John Deere D fenders and other parts for sale; Phil DoMoe nnn-nnn-nnnn (Red Bluff CA)
John Deere D live hydraulic system, $150; Buck Evans nnn-nnn-nnnn (Greenville IL)
John Deere D, 1947, electric start, repainted nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere D, 1950, #D184246, nice tractor, new 18.4 rear tires, been used in parades, $3800; Donald Nystrom nnn-nnn-nnnn (Bonners Ferry ID)
John Deere D, stuck, $675; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere GW, 1947, pan seat, around 120 made, engine turns, mostly complete, wide front end in good condition, $3750 obo, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)
John Deere H front mushroom wheel weights, $400 for the pair; Todd Penery nnn-nnn-nnnn (Placerville CA)
John Deere H, 1941, restored/rebuilt, good tires, mowing sickle; Renee Lee nnn-nnn-nnnn (Booneville CA)
John Deere H, 1942, completely rebuilt, sheet metal is fantastic and so is the paint job, starts easily, new tires too! Parade ready, email for photos/video, $4000; Dale Fye nnn-nnn-nnnn xxxx@xxxx.xxx (Shelton WA)
John Deere H, 1946, veteran of several parades, upgraded to 12v with alternator, can deliver if needed, $2800; Bob Winters nnn-nnn-nnnn (Grass Valley CA)
John Deere H, SN 56498, 1945, hand start, runs well, needs one tire, fuel tank flushed, $1150 obo, call for more information; Larry Schwarz nnn-nnn-nnnn (Centralia WA)
John Deere late styled BNs, 3 total, 2 are on 42 inch rear wheels, one on 38 inch, mostly complete, unknown engine conditions, $500 each, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)
John Deere M, 1951, good rear tires, very good original condition, complete, starts easily, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2600. Email for photos, Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere MC, 1949, nice original, runs, factory blade/toolbar, $3000; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’Alene ID)
John Deere model H, SN 48630, $3500; J.H. Keith nnn-nnn-nnnn (Hermiston OR)
John Deere R, 1949, #R1118, looks and runs good, used in parades, $4800; Donald Nystrom nnn-nnn-nnnn (Bonners Ferry ID)
John Deere throw out bearing for 3155 tractors and others. Used about 200 hours. Was working when pulled. A-AL120028 is the part number, can email photo if interested, $100; Carol nnn-nnn-nnnn (Keno OR)
John Deere tractors: 1940s with 6 foot sickle mower, running condition, new tires. 1941 with a plow, new tires, running condition. 1943 JD B, WW2 model, no electric start, fair tires, running condition. 1945 JD A, wide front, 12v system with alternator, fair tires, running condition; Bill nnn-nnn-nnnn (Covelo CA)
Kubota DT 185, 4x4, no loader, very good rubber, good older machine, $2475; Don Chappell nnn-nnn-nnnn (St Helens OR)
Kubota L 185, 2x4, no loader, very good rubber, engine stuck, no starter, good parts machine, $575; Don Chappell nnn-nnn-nnnn (St Helens OR)
Magneto, 4-CMA base mount, 4 cylinder, Case tractors, throws a good spark when turned by hand, pictures by request; Jerry Bird nnn-nnn-nnnn (John Day OR)
Massey Ferguson model 50 industrial tractor with shuttle transmission, 3 pt., PTO, loader but no bucket, Perkins 470 diesel engine, runs well. $1750; Don Chappell nnn-nnn-nnnn (St. Helens OR)
Massey Harris 101 Jr., 1941, runs, tires hold air, sheet metal good, pictures on request, $1350 obo; Stuart Wade nnn-nnn-nnnn no text please (Chico CA)
Massey Harris 101 Jr., standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Massey Harris 30, good condition, runs good, new paint, tires are in good condition, $2500 obo; Wes Green nnn-nnn-nnnn (McKinleyville CA)
Massey Harris 44 tip toe wheels, $400; Gene Struckle nnn-nnn-nnnn (Davenport WA)
Massey Harris 55, diesel, was bought new when it came out; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)
McCormick Deering 10/20, 1920s, ran 1-1/2 years ago, $3500; Alan nnn-nnn-nnnn (Grass Valley CA)
McCormick Deering I-4, turns over, good shape, $950. O-4, runs, missing orchard sheet metal, $1000. O-4, very early motor stuck, missing orchard sheet metal. O-4 parting out: orchard belt pulley, shutters, plus misc. Rare ODS-6S orchard diesel engine free and 1 parts tractor, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering TD-6 motor parts, block, head; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering W4, excellent running, new rear tires, shutters, gas and distillate, $2000; Don Eckelberry nnn-nnn-nnnn (Noxon MT)