Alamo 2-1/2 hp hit and miss engine, complete engine, including Webster magneto and Webster bracket, all painted, but 70% apart, $500; Craig Mathews nnn-nnn-nnnn (Northridge CA)
Alpha De Laval 3 hp with rotary magneto. Runs great, barn fresh engine, complete less oiler, $700; Craig Mathews nnn-nnn-nnnn (Northridge CA)
Baker Monitor pump engine, with pump jack and Dempster pump setup on wagon for display, $1200; Richard Hanna nnn-nnn-nnnn (Rexford MT)
CH&E 5 hp on cart, $1400; Dennis Chaney nnn-nnn-nnnn (Dayton NV)
Challenge 2 hp, #3097, tulip hopper, runs, complete, on cart, $2200; Richard Hanna nnn-nnn-nnnn (Rexford MT)
Commercial 60 hp tank cooled engine made in Los Angeles, CA in 1915. Only known 60 hp Type C engine. It runs great and is easy to start with air. This impressively big engine is mounted on a 3-axle dedicated gooseneck trailer (CA license). Electric start gasoline air compressor for starting. A 6-inch United Pump made in Oakland is belted to the engine and can pump water for shows. Engine has been shown at several shows. Complete unit is $14000, will sell engine separate for $10000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Delaval 1-1/2 hp Type F, $600; Dennis Chaney nnn-nnn-nnnn (Dayton NV)
EK Hercules 5 hp, 246004, complete, was in fire, $200; Jose nnn-nnn-nnnn (Rosemead CA)
Fairbanks 1-1/2 hp, hopper condenser cooler. Needs work, stuck, $225 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Fairbanks Morse 10 hp Cannon barrel type on cart, $3500. Fairbanks Morse 2 hp Eclipse with hacksaw, $1400. Fairbanks Morse 1 hp Eclipse with water pump, $1200. Fairbanks Morse 1 hp Eclipse on skids, $950. Fairbanks Morse 1 hp headless type, $850. Fairbanks Morse 1-1/2 hp Model Z, $500; Dennis Chaney nnn-nnn-nnnn (Dayton NV)
Fairbanks Morse 1-1/2 hp, headless with Sumter magneto, complete, on cart, runs, $800; Richard Hanna nnn-nnn-nnnn (Rexford MT)
Fairbanks Morse 20 hp Z tank cooled engine built in 1920. The impressive engine is on an iron wheel cart. Completely restored and painted. Runs great and has been shown at several shows. Few of the 20 hp engines still around, $7000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Fairbanks Morse 6 hp engine, $200; Brock Field, nnn-nnn-nnnn (Pe Ell WA)
Fairbanks Morse 6 hp Z, hit and miss, has all parts, spins freely, previous owner had it running, but sat undercover since I got it, $650; Jon nnn-nnn-nnnn (Graham WA)
Fairbanks Morse D, $350; Dale Bybee nnn-nnn-nnnn (Acton CA)
Fairbanks Morse N 15 hp cylinder, needs to be sleeved, $400; David Turner nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)
Fairbanks Morse, 1 cylinder, model 31, Borneo engine, 5x6-1/4, parts engine, $100; Jose nnn-nnn-nnnn (Rosemead CA)
Fairbanks Morse, 6 hp, restored, nice runner, $1000; Dale Bybee nnn-nnn-nnnn (Acton CA)
Fairbanks Morse, headless, 1-1/2 hp, complete with spare block, $350; Jose nnn-nnn-nnnn (Rosemead CA)
Fairmont steel spoked engine used in the railroading business years gone, motor turns over, never had running, as is, $350; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Field Brundage 1-1/2 hp Wolverine, #6702, with Webster Tri Polar magneto, runs, on cart, complete, one flywheel needs new gib key, $850; Richard Hanna nnn-nnn-nnnn (Rexford MT)
Foos 6 hp engine on original horse drawn cart. Has water hopper and rotary ignition. In excellent condition, approximately 1905. $13000; David Traver nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)
Fuller & Johnson Farm Pump engine parts, 1914 engine, SN 38555, all the parts appear to be in excellent condition, all have been cleaned and painted, head, cylinder, rocker arm, valves, muffler, crank, case, piston (no rings), connecting rod, hold out latch, push rod, and flywheel. 2 fuel tanks in very poor condition, selling as a unit, will send photos on request, $200; David Wirth, nnn-nnn-nnnn (Walla Walla WA)
Fuller and Johnson N 1-1/2 hp, early, #1717 with ignitor, runs, complete on cart, $750; Richard Hanna nnn-nnn-nnnn (Rexford MT)
Fuller and Johnson N 3 hp, #81579, with ignitor, coil, battery, starts, complete, runs, on cart, $850; Richard Hanna nnn-nnn-nnnn (Rexford MT)
Fuller and Johnson NB, 1-1/2 hp, in a continuous style mixer, $200; Jose nnn-nnn-nnnn (Rosemead CA)
Fuller and Johnson Pump engine, #115285, with pump jack and pump setup on cart for display, $1200; Richard Hanna nnn-nnn-nnnn (Rexford MT)
Galloway 5 hp, 1910 round rod, complete, on original cart, not running, $1500; Richard Hanna nnn-nnn-nnnn (Rexford MT)
International LB 3-5 hp, runs, on 2 wheel cart, $950; Richard Hanna nnn-nnn-nnnn (Rexford MT)
International M, 3 hp, older restoration, $800. 1-1/2 hp M, $700; Dale Bybee nnn-nnn-nnnn (Acton CA)
John Deere 3 hp E, $1050 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere Model E, 1-1/2 hp engine. Complete but not running, $750; David Traver nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)
Julien 5 hp, beautifully restoration, runs great, no cracks etc. Can help with shipping or delivery, email for photos, $6000; Dale Fye nnn-nnn-nnnn (Shelton WA)
Kohler light plant engines, 2 available, one is flathead other is overhead valve, think they would run but have not tried to start them, both turn over, would take $100 for both; Jerry Bird nnn-nnn-nnnn (John Day OR)
Light plant engine, 2 cylinder, skid mount, possibly Fairbanks, $150; Rob nnn-nnn-nnnn (Prineville OR)
Little Woodsman drag saw, 3 available, 1 extra engine, some spare parts, 2 blades 5 feet and 6 feet long, not running, $550; Dale Bybee nnn-nnn-nnnn (Acton CA)
Mogul, 1 hp, parts engine, $80. Unknown hopper/dry head $60; Dale Bybee nnn-nnn-nnnn (Acton CA)
Montgomery Wards 1-2 hp, 4 inch flat belt, #66279, rope pull start, from 1950s-1970s? runs, complete, $175; Richard Hanna nnn-nnn-nnnn (Rexford MT)
Novo 2 hp, hit and miss, complete good compression, $400; Jose nnn-nnn-nnnn (Rosemead CA)
Novo 3 hp with air compressor on cart, $1200; Dennis Chaney nnn-nnn-nnnn (Dayton NV)
Stover CT1 2 hp, #273583 with Wico mag, runs, complete on cart, $700; Richard Hanna nnn-nnn-nnnn (Rexford MT)
Stover CT-2 with Rex mixer, mixer has 5 brass tags, $800; Dale Bybee nnn-nnn-nnnn (Acton CA)
Stover vertical, MV-2 complete with gear box, $800; Dale Bybee nnn-nnn-nnnn (Acton CA)
Stover, 10 hp, tank cooled, #H36844, manufactured 1912, 45 in flywheels, good condition and runs well, mounted on 2 axle unlicensed trailer, $10000; Smoke Stover nnn-nnn-nnnn or xxxx@xxxx.xxx (Sacramento CA)
Waterloo Boy 2-3/4 hp on cart, $1800; Dennis Chaney nnn-nnn-nnnn (Dayton NV)
Wisconsin V4, stuck. Electric start, $90 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Wisconsin V4. Ran when it was put in storage, $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Witte 2 hp, headless hit and miss, complete, no mag, $350; Jose nnn-nnn-nnnn (Rosemead CA)
Witte 2-1/2 hp, throttled governed, in Essicks cement mixer, $200 obo; Jose nnn-nnn-nnnn (Rosemead CA)