October 2018 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers M crawler, wide gauge, 20 inch pads, PTO, hydraulic controls, brackets for blade, blade not hooked up, 4 extra sprockets, extra front idler, extra fuel tank, carburetor and mag parts, clutch discs, runs and looks good, $1500 for all; Gary White nnn-nnn-nnnn (Yamhill OR)

Allis Chalmers Ms, 1 top seat with blade and 1 tail seat, $800 for the pair; Harry Lindahl nnn-nnn-nnnn no messages (Richvale CA)

Allis Chalmers Roto Baler PTO drive, $795; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Allis Monarch 35, parting out; Buck Evans nnn-nnn-nnnn (Greenville IL)

Case C, 1937, runs, last shown at the 2018 Branch 245 show, $1800, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)

Case C, S or R F&H HC245 rear round spoke wheels 9x24, $300. Case C S D parts, Case DC-4 with heart shaped front end, hand clutch, live pto, hydraulic and eagle hitch, runs, need some tinkering, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case DC rear half, 98 inches wide, with fuel tank, fenders, wheel centers, single disc brakes, vin tag, drawbar, single hydraulic pump. 1953 Case DC for parts, no cylinder head or hood, incomplete eagle hitch, broken adjustable wide front, 1 rear wheel weight. Moving must sell; Dave nnn-nnn-nnnn (Hillsboro OR)

Case S front axle, wheels, drag link, $100; Buck Evans nnn-nnn-nnnn (Greenville IL)

Case SC, 1950, runs great, all sheet metal intact (fenders could use some restoration), rear tires good, front tire fair, working hydraulics and PTO. Email for photos, $1200 obo; Roy Murray nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

Case SC, wide front, new tires, engine junk, $300; Harry Lindahl nnn-nnn-nnnn no messages (Richvale CA)

Case walk behind trencher, older machine but starts and runs well, Kohler engine, has 4 foot auger, operates well, $1500; Joe Giordano or xxxx@xxxx.xxx nnn-nnn-nnnn (Port Orchard WA)

Caterpillar 10, 20, 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 22 1J WSP wide pad runs and drives, needs valve job, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Caterpillar 22, wide gauge, SN 2F8638W, not running, but engine free and gear boxes are free, carburetor and mag have been rebuilt and has extra intake/exhaust manifold, pictures on request, $1200; Gary Strausbaugh nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)

Caterpillar 22s, negotiable; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)

Caterpillar 30 carb needs kit, $450; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 30 exhaust manifold late style nice, $350; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 30 piston ring set, .060 over, Hastings brand, $250; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 50 gas carburetor, early style, $800; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 60 air cleaner body has dents, $300; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 60 cast arm rests, $150; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 60 fan shroud, new reproduction, $450; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 60 late style carb, needs kit, $600; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 60 old style heat box with brass tubes, heat box lever, $300; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar D2s: 5J9A17 track crawler, 5J9572 orchard, 5U13624 orchard, 3J185 with blade, buy them all, all need work, $4800; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)

Caterpillar gas 70 seat cushions, new Hahn, $850; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar headlights, 3 pieces, small mesh wire, $100 each; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar RD6 and up pony engine carburetor with air cleaner attachments, K5-K6 style, $350 each; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar thurmoids (connect engine to clutch) for D7 and D8, $50; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)

Cletrac W radiator, $300. Head $250; Buck Evans nnn-nnn-nnnn (Greenville IL)

Combine parts: John Deere 36 parts. International 915 parts. Holt bean header, $150. JD 36 bean header, $150. JD 36 grain header, $150; Harry Lindahl nnn-nnn-nnnn no messages (Richvale CA)

Eisemann, GV4 mag with all covers on back stuck, $300 ea, 3 available; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Eismann D2-D4 pony mag, $150; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Farmall 140, call or text; Tom Landon nnn-nnn-nnnn (Colburn ID)

Farmall 460 cylinder head, came from 6 cylinder, 236 cubic inch diesel engine, $180 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farmall B, 1947, hi crop conversion kit, passenger seat all factory parts except seat cushion. All it needs is paint. Too many new parts to list. Made in Louisville. $2475; Roger Lepage nnn-nnn-nnnn (Redding CA)

Farmall Cub, 1948, front and rear weights, removed gas tank and radiator to clean, have gaskets to reassemble, tires in good condition, running prior to disassembly, includes Operator’s and Service manual and parts catalog, $1600 obo; Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Farmall Cub, 1948, runs, front blade, plow, disc, and all four wheel weights, good condition, tires and rims good, has been garaged for last 43 years, SN 36258, manual controls, $1200; Jerald Jacobs nnn-nnn-nnnn (Washougal WA)

Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall H, 1950, SN 333471X1, FBH, no radiator, tin excellent, wide front, engine free, needs tires, can load, $750 obo; Larry Manley nnn-nnn-nnnn (Dorris CA)

Farmall M, 1948, SN FBK155788X1, needs carb and starter, tin good, has belt drive, narrow front, needs wheel and two rims, needs tires, $500 obo; Larry Manley nnn-nnn-nnnn (Dorris CA)

Farmall sheet metal from A to 450, plus misc parts. Super M motor stuck, missing heads, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super C, wide front, Fast Hitch, 2 sets rear weights, has case loader on it, recent paint and nice decals, great rubber, runs excellent; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super C, with 8-foot belly mounted grader blade, utility box, new tires, chains for rear tires, always garaged, $2750 obo; Bill Littlefield nnn-nnn-nnnn (Eagle Point OR)

Ferguson TO-30, runs good, lift works but does not hold, $1200 obo; Wes Allen nnn-nnn-nnnn or xxxx@xxxx.xxx (Live Oak CA)

Ferguson TO-35, SN 62990, backhoe and front loader, nice working tractor, have pictures, $4000 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Ford 4000, 1964, SN 41201-58165, restored and painted, good tires, have pictures, $4800 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Ford 800, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 800, diesel, 5 speed, with hydraulic loader, needs work, $1200; Gary nnn-nnn-nnnn (Sheridan OR)

Ford 8N, 1951, SN 8N-414276, restored, pictures on request, $4800 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Ford 8N, 2N, 9N, reproduction rear fender, $65; Todd Penery nnn-nnn-nnnn (Placerville CA)

Fordson N, 1936, British, excellent steel spade lug rear wheels, heavy cast iron front wheels, very good fenders, engine is out of tractor and needs overhaul, $300; John Lang nnn-nnn-nnnn (Monmouth OR)

Fordson, 1935, rear wheel pads are similar to a track layer, completely original, has not run for several years but does turn over, $1000, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)

Gibson, 1948, Model E. 26-foot Hyway cargo trailer. Gas golfcart. Manure spreader revised for parades. All one package, all in good condition, $12500; Bob Vogel nnn-nnn-nnnn (Santa Paula CA)

Harris Power Horse, 4-wheel drive, $3500 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International 340 Utility, good running original working condition tractor, sheet metal, tires and wheels are good, has working TA and two point hitch, $3500, can send pictures; Dan Tombrink nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)

International 350 Hi Utility, fast hitch, 1 remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 460 Utility, 282 cubic inch diesel engine, $1530 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International B275-B414 tractor parts: cylinder head, transmission/rear end gears, hydraulic parts and much more; John Lang nnn-nnn-nnnn (Monmouth OR)

International belt pulleys, both 4 bolt and 3 inch centers, one is 9.5 inches and one is 11 inches in diameter, $50 each; Wayne Sealock nnn-nnn-nnnn (Yakima WA)

International T6 dozer, angled blade, $2000; Don Chappell nnn-nnn-nnnn (St. Helens OR)

John Deere .090 rebore kit, for early styled B tractors SN 96000-201000, includes pistons, pins, retainers, and rings, originally purchased from Yesterdays Tractors, $325; Larry nnn-nnn-nnnn (Placerville CA)

John Deere 420C, good condition, runs good, has aftermarket loader that would be easy to remove, $2000; Vern Fought nnn-nnn-nnnn texting is best (Exeter CA)

John Deere 420T, excellent condition, works good, new paint and decals, good tires, nice show tractor, a lot of new parts, new battery, 3pt, runs and starts good, $2950 obo; M. Beld nnn-nnn-nnnn evenings after 6 (Lynden WA)

John Deere 440 crawler rear belly pan, $100; J. Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 50 and 60 parted out, lots left: crank, head, grill, hood, misc parts. JD MT fenders and brackets, $100. JD 26 inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30 inch wheel cast centers part# F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 60, narrow front with Roll-o-Matic, 42-inch rear wheels, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 630, 3500 hours, Roll-O-Matic, power steering, original 3pt hitch with original top link, good tires, straight sheet metal, starts and runs great, does not use oil. New manifold set two years ago. Includes a #45 loader with all hydraulics rebuilt, converted to hydraulic dump. $4500; Jim Temple nnn-nnn-nnnn (Noti OR)

John Deere 820 black dash, runs, big fenders, foot throttle, dual hydraulics, fair overall, $5500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere A, 1937, unstyled, rebuilt magneto and carburetor, runs good, clean tractor, tires cracked, $1800; David Covert nnn-nnn-nnnn or nnn-nnn-nnnn (Kuna ID)

John Deere A, 1943, SN 5211850, hand start, Roll-O-Matic, good older tires, $2500; Henry Geschwill nnn-nnn-nnnn (Salem OR)

John Deere AR, $1900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere B, $2750; Don Chappell nnn-nnn-nnnn (St. Helens OR)

John Deere B, 1935, SN 10645, have a brass tag, older restoration, 4 new tires, ran when parked, $1850 obo, moving; Dave nnn-nnn-nnnn (Redding CA)

John Deere B, 1936, unstyled, short frame with rockshaft, new tires front and back, F&H wheels, new muffler, radiator core, gas manifold. Timed for gas, about 28 BTDC, new gas tank cover, Jordie’s decals and more. Nice. $3500; Frank Stricklin nnn-nnn-nnnn or xxxx@xxxx.xxx (Silverdale WA)

John Deere BO Lindeman, 1943, overhauled engine, $5500; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’Alene ID)

John Deere BN, mid 40s, unrestored, good sheet metal, electric start, 6 speed, complete except missing mag, good rubber, no tag, $1400 obo. Same vintage BW with very good sheet metal, hand start, tag unreadable, on cutoff rims, missing carb, $1000 obo; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)

John Deere D fenders for a 1942, $400; Henry Geschwill nnn-nnn-nnnn (Salem OR)

John Deere D, $1000; Don Chappell nnn-nnn-nnnn (St. Helens OR)

John Deere D, 1927, in dry storage for 10 years, not stuck, comes with steel lugs and extension rims, $3000, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)

John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere fenders, have number on it for 7720 or 7420, may fit others, $250 obo you haul unable to ship; Carol nnn-nnn-nnnn (Keno OR)

John Deere G, 1938, unstyled, original condition, ran well when parked, $3500; Dave nnn-nnn-nnnn (Aurora OR)

John Deere H front mushroom wheel weights, $400 for the pair; Todd Penery nnn-nnn-nnnn (Placerville CA)

John Deere H, 1942, excellent condition, electric start, new rear tires, front good, parade ready, have had in parades for 6 years, new paint and decals, runs and starts good, $2900; M. Beld nnn-nnn-nnnn evenings after 6 (Lynden WA)

John Deere LA, 1941-1946 (missing tag), needs assembly, engine overhauled, radiator and gas tank cleaned. Gaskets and all parts complete for assembly. Tires in good condition, engine excited to run again. Will include Operator’s, Shop and Parts manual, $1800 obo; Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

John Deere MC or 40 tracks, $750; Don Chappell nnn-nnn-nnnn (St. Helens OR)

John Deere MC, 1951, excellent condition, has new steering clutches and brake bands on both sides, undercarriage is 98%, extremely rare orchard exhaust, strong motor with 90 PSI in both cylinders, custom C frame has manual angle and hidden hydraulic line design, new seals in both rams, fresh paint, leave message or text for more information; Travis Hockel nnn-nnn-nnnn (Sprague River OR)

John Deere MC, complete with dozer, need work, plus extra M-1000 dozer and lots of parts; Ralph nnn-nnn-nnnn (Wolf Creek OR)

John Deere MI, 1951, SN 10379, runs good, rare tractor, just over 1000 produced, extra parts included, call for more information, $1500; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere MT, 1951, running, $3000 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere MTs: 1950, SN 22653, good paint, runs good, good tires. 1951, SN 33097, good paint, good tires, runs good, $2500 each; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere tractors: JD B, 1939, engine stuck, barn find, straight tin, decent tires, $1000. JD AW, 1948, 42 inch rear wheels and high clearance wide front, bored 45 over, great running tractor, used to be used in the hay, but idle for a few years, $2500. JD B, 1948, Roll-O-Matic front, running tractor, $1000. JD D, 1936, round spoke rear wheels, tractor is loose, should run, $2500; Chris Carl nnn-nnn-nnnn or xxxx@xxxx.xxx (Stanwood WA)

Massey Ferguson 130 vineyard, runs and drives, but has issues. Includes MF130 parts tractor, call for more info, $2950 cash; Mike Roberts nnn-nnn-nnnn (Puyallup WA)

Massey Ferguson 2135 fairway tractor, SN 648000447, have pictures, $4500 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Massey Ferguson 65 gas, good engine, etc; Buck Evans nnn-nnn-nnnn (Greenville IL)

Massey Ferguson 98, tractor is restored, rare model, 3-71 GM engine, call for details, $15000; Dave nnn-nnn-nnnn (Aurora OR)

Massey Ferguson MF 50, SN 920009-M4, needs work, $800 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Pony farm tractor, motor turns over, hasn’t run in years, tires hold air but need replaced, rims solid, nice sheet metal, would make a nice restoration or use for parts, very restorable, $1500; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

McCormick 40 series air cleaner, complete, $100; Buck Evans nnn-nnn-nnnn (Greenville IL)

McCormick Deering I-4, turns over, good shape, $950. O-4, runs, missing orchard sheet metal, $1000. O-4, very early motor, stuck, missing orchard sheet metal. O-4 parting out: orchard belt pulley, shutters, plus misc. Rare ODS-6s orchard diesel engine free and 1 parts tractor, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering, KOC809398 best that can be made out, tires are shot, motor turns over, $700; Vern Fought nnn-nnn-nnnn texting is best (Exeter CA)

McCormick WD9, in work clothes but still looks good. Has a drum winch on back, live hydraulic although not presently installed, but they do work well. Has a loader that comes with it, hence the live hydraulics. Loader taken off to do some work on her and never put back on. Loader bucket used on another project. Pictures should say it all, good tires, alternator, converted mag to electronic ignition, so it starts great; Gale nnn-nnn-nnnn (Olalla WA)

Minneapolis Moline 335 Industrial, 1960, has Ottawa loader, stuck engine, rare tractor, one of 306 built. Needs restoration or for parts, can send pictures, $1900; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $3450; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, 1960, diesel, 68 hp, 540 PTO, 23.1-26 rears, 7.5-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9 foot Cancade hydraulic two way front blade, will sell with or without blade. Blade available separately. Can send pictures, $3900 with blade; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline rear wheel weights, UT 518, $100 for pair; Todd Penery nnn-nnn-nnnn (Placerville CA)

Minneapolis Moline UT-100D, 1946, restorable or for parts, never had it running, can send pictures, $1250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Multiple tractors, will sell individually or as a lot. Avery A, wide front. Wards Twin row crop front. Minneapolis Moline BF wide front. Engines are stuck, some new front tires, tractors are virtually complete, need restoring; Garland Goesch nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Townsend WA)

Oliver 80, Wheatland, $1400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Oliver HG, 1942, older restoration, has about 40 hours total run time on restoration, engine rebuilt, new steering bands, has PTO and belt pulley, under carriage about 80%+ about as good as you will find, $4200 obo; Norm nnn-nnn-nnnn (Bellingham WA)

Parts: Case 310 carcass, $250. International TD6 hard nose, $100; Tony Carbaugh nnn-nnn-nnnn (Turner OR)

Power Horse A20, 1938, made in Salt Lake City, UT, $8000; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rims, 2 available, 12x36 inch, 2 rib rims, with tires (10-20%), $100 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rims, 2 available, clamp on duals, 12x24 inch, one with no tire one with 14x24 inch tire (40%), $200 for the set obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tire and tube, 7.50x22 for John Deere L, 80% good rubber, $300; Clark Higley nnn-nnn-nnnn (Kimberly ID)

Tire, front for Ford or Ferguson, 4x19. Moving must sell; Dave nnn-nnn-nnnn (Hillsboro OR)

Tires: matched pair of 9.5x42 Goodyear 45 degree bars, 80% tread, no weather checks, mounted to rust free rims, no fluids in tires, $500 for pair. 11.2x38 L/S rear tractor tire, 90% tread, no weather checking, $150; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)

Twin City, JTS standard, 1936, J series transition to Minneapolis Moline, new tires, fuel tank, hood and paint. Steering wheel recovered with new rubber, classic arched front axle. Only 460 built. Only one in Oregon that is known of, please call for details and history, $2500; John nnn-nnn-nnnn (Medford OR)

Wheel weights, Tulare FFG, $100; Harry Lindahl nnn-nnn-nnnn no messages (Richvale CA)

Wheels, 10x26 from a John Deere H, 7 lug bolt holes, $35 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wheels, 2 available, 12x36 inch, 9 lug bolts on 9.5-inch circle, no tires, $100 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)