Aermotors, both motors on single cart, $2000 or can negotiate for one or the other. One has mag the other doesn’t; Ron Shipman nnn-nnn-nnnn leave message to get call back (Kingsburg CA)
Bulldozer pump on cart, small, overhauled, $150; Ron Shipman nnn-nnn-nnnn leave message to get call back (Kingsburg CA)
Challenge, 2 hp, SN 3097, on cart, $2000; Rich nnn-nnn-nnnn (Rexford MT)
Climax Blue Streak genset model R165, 6-1/8x7, 150 hp at 1200 rpm, 6 cylinder cast in pairs, twin updraft carbs, dual ignition, 100KW, 120/208V 3 phase 60 Hz, $800; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Davenport CA)
Commercial 60 hp tank cooled engine made in Los Angeles, CA in 1915. Only known 60 hp Type C engine. It runs great and is easy to start with air. This impressively big engine is mounted on a 3-axle dedicated gooseneck trailer (CA license). Electric start gasoline air compressor for starting. A 6-inch United Pump made in Oakland is belted to the engine and can pump water for shows. Engine has been shown at several shows. Complete unit is $14000, will sell engine separate for $10000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Complete collection of stationary engines: Sattleys, both 1-3/4 hp, Wico mag. Headless Witte, 2 hp, almost complete. Fuller and Johnson, 4 hp, Wico mag. Fairbanks Morse Z, 3 hp, rotary mag. Wade Ignitor, 1-1/4 hp, Webster mag. McCormick Deering Model M, 1-1/2 hp, Wico mag. Root and Vandervoort Ignitor, 2 hp, complete but no mag. All engines but headless Witte are in running condition. Three engines have original crank handles, all engines have no welds or cracks. Call or text with any questions. Leave a brief message and I will get back to you. No delivery, but can load with tractor; Steve nnn-nnn-nnnn (Trail OR)
Cushman Cub, 2 hp, runs good, new paint, mounted on a dolly with casters, $275; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn do not leave message (Chehalis WA)
Cushman, 3 hp, on a cart, $400; Ron Shipman nnn-nnn-nnnn leave message to get call back (Kingsburg CA)
De Laval, 6 hp, hit and miss, 42 in flywheels, converted to rotary mag and plug, have some parts for the original, needs head gasket, $1100 obo; Dave Ruhland nnn-nnn-nnnn (Garden Grove CA)
Engine Collection for sale: from 1920s-1940s, mixture of stationary engines (Fairbanks, Wisconsin, Economy, Witte), air cooled and water cooled, cast iron wheels of various sizes, grain scale, rototillers, complete drag saw, additional items, but too many to list. Wooden tank orchard sprayer with iron wheels, complete with pump and motor on 18 foot trailer, $4800 obo takes all, $1800 obo for orchard sprayer alone, no trades, no trades, can send pictures; Dave Hoffman nnn-nnn-nnnn or xxxx@xxxx.xxx (Olga WA)
Engine, 5 hp (?), on cart, starts easy, runs well, $1000; Ron Shipman nnn-nnn-nnnn leave message to get call back (Kingsburg CA)
Engines and parts for sale: Stover CT2 fuel tank $50, carb $30, pulley $30, many other misc parts; Tony McNeal nnn-nnn-nnnn (Amboy WA)
Fairbanks Morse Cannon style, 12 hp, FM rotary mag and extra hot bulb, runs good, call or text with questions, leave a brief message; Steve Felby nnn-nnn-nnnn (Trail OR)
Fairbanks Morse engines, 1 complete, 1 almost complete, frozen, make offer. Also 1 unknown engine, also frozen, make offer; Phil Wall nnn-nnn-nnnn (Buckley WA)
Fairbanks Morse N, 20 hp, build date of Oct. 1910, engine runs and has been shown at the Great Oregon Steamup in Brooks OR, pictures on request, $20000; Gary Strausbaugh nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Fairbanks Morse, 10 hp, Model 36A, running condition, $2800; Wes Allen nnn-nnn-nnnn or xxxx@xxxx.xxx (Live Oak CA)
Fairbanks Morse, 1-1/2 hp, headless, Sumter magneto, complete on cart, $800; Rich nnn-nnn-nnnn (Rexford MT)
Fairbanks Morse, 3 hp, with ignitor and magneto and battery to start, on cart and battery box, #262719 on water hopper, $900 reduced price; Bill Majors nnn-nnn-nnnn (Walnut Creek CA)
Fairbanks Morse, Eclipse vertical single fly wheel, 1911, SN A-100, complete right down to original battery box, $950; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Fairbanks, 1-1/2 hp, hopper condenser cooler, needs work, stuck, $225 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Field Brundage Wolverine, 1-1/2 hp, SN 6702, with Webster magneto, on cart, $850; Rich nnn-nnn-nnnn (Rexford MT)
Fuller and Johnson N, 3 hp, SN 81579, ignitor, coil, battery start, on cart, complete, $850; Rich nnn-nnn-nnnn (Rexford MT)
Fuller and Johnson, 1-1/2 hp, on a cart, $300; Ron Shipman nnn-nnn-nnnn leave message to get call back (Kingsburg CA)
Galloway, 5 hp, round rod, complete, original cart, $1450; Rich nnn-nnn-nnnn (Rexford MT)
International LA, 3-5 hp, 1936, SN LAB2054, runs, needs gas tank cleaned or replaced, $550; Wayne Slocum nnn-nnn-nnnn or xxxx@xxxx.xxx (Chico CA)
John Deere E, 3 hp, $1050 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere E, 3 hp, 1926, restored, $995; Dave nnn-nnn-nnnn (Aurora OR)
Lister, 9 hp, clutch pulley belted to 3k generator and Champion blower for display, no cranking, engine starts with oil field type starter, rebuilt licensed trailer, new batteries, new tires, travel at highway speeds, $4500; Gene DeCamp nnn-nnn-nnnn or R. Lahti nnn-nnn-nnnn (Cottonwood AZ)
Little Wonder Five cement mixer built by Waterloo Cement Machinery Corporation, has Novo type S engine, engine piston is free but valve train is stuck, cement drum casting has crack, comes with a spare Novo S engine that is rough but all there, send email for photos, $500 or might trade for machinist tooling; Tanner Remillard nnn-nnn-nnnn or xxxx@xxxx.xxx (Pendleton OR)
Maxwell, 4 cylinder, complete with transmission on stand. Recently became frozen, $200; Phil Wall nnn-nnn-nnnn (Buckley WA)
Maytag 92s, 7 available, 3 upright Maytags available, all running, $250-$700, pictures available; Jess Riker nnn-nnn-nnnn (Beaver UT)
Maytag twin cylinder, good condition, $150; Dave nnn-nnn-nnnn (Aurora OR)
Mohawk marine engine, magneto ignition, made in New York, very rare, $325; Buck Evans nnn-nnn-nnnn (Greenville IL)
New Way, 2-1/2 hp, vertical, SN 1956, good shape, needs restored, have new tin fan shroud in box, painted with decals, $900; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
New Way, 3-1/2 hp, 1917, vertical, air cooled, completely restored including pin striping and flowers, on a cart, $2900; Jess Riker nnn-nnn-nnnn (Beaver UT)
Novo, 4 hp, restored, runner, on iron wheel cart. Novo, 2 hp, restored, runner. Shown both engines at several fairs, $850 each; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Samson, 10 hp, can be run on either propane or gasoline, on iron wheel cart, has not been painted, $8000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Samson, 6 hp, on iron wheel cart, painted, has been shown many times, $7000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Schmidt Chilled Cylinder, 3 hp, hit and miss, battery ignition, on cart, battery box, $2500 reduced price; Bill Majors nnn-nnn-nnnn (Walnut Creek CA)
Wade LM1 drag saw, light weight, has hand holes, transportation wheel, magneto equipped, has good wood frame with decals, good compression, has Wico EK mag, $295; Dave nnn-nnn-nnnn (Aurora OR)
Waukesha engine, 6.125.64F, 6 cylinder, F-head, 125 hp, Sterling radiator (possibly out of Sterling truck), $800, pictures on request; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Davenport CA)
Wisconsin V4 engine, ran when it was put in storage, $200 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Wisconsin V4 engine, stuck, electric start, $90 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Witte stationary engine w/spare engine parts and gasket set, circa 1940s, engine is complete, not stuck, has always been stored indoors, very good condition but not running due to sitting, data plate reads Model ADRS, bore 3.25, stroke 4.5, No AD-31305, 1200 rpm, radiator cooled engine, $475, photos on request; Dean Sumpter nnn-nnn-nnnn (Elk Grove CA)
Witte, 5 hp, 1922 or 23, new rings and valve job, bearings are adjusted, has aftermarket carb, magneto is sticky, mounted on a dolly with casters, bore is perfect, $250; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn do not leave message (Chehalis WA)
Witte, 7 hp, buzz saw with 2 blades, SN B36820, complete with original steel wheeled cart, stored 25+ years, $5000; Rich nnn-nnn-nnnn (Rexford MT)