1921 Ford Model T delivery truck, restored, $8000; Hubert Bierly nnn-nnn-nnnn (Bend OR)
1928 Overland car parts, fair condition, best offer; Ron nnn-nnn-nnnn (Modesto CA)
1939 Plymouth all original coupe like the ones in Roger Rabbit, original upholstery, new headliner, 58000 miles, new running boards. Won numerous awards, pearl white with burgundy fenders, real head turner, can email photos to interested people only. Owned the car over 45 years and hate to sell, but the time has come, $25000 obo; Carol nnn-nnn-nnnn (Keno OR)
1946-1948 Mercury Flathead, V8, 100 hp, 59 A-B heads, $975; Don Chappell nnn-nnn-nnnn (St. Helens OR)
1947 DeSoto convertible, project with many parts collected over the years, includes a sedan with nice front clip and parts and very restorable convertible body, titled and non op. Getting old and too many project, open to realistic offers; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)
1948 International KB2 panel truck, no engine or tranny, no glass, has had some body work over the years, but still needs a lot although truck is very solid for its age. Restoration job, very classy neat looking body, make reasonable offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
1950 Ford sedan chassis, no engine or transmission, very good condition, has 1965 Mustang rear end (rare), $275; Wendell Newman nnn-nnn-nnnn (Carson City NV)
1956 Chevrolet 6400, 5 speed/2 speed with 261 motor, refurbished with correct seat, paint, windshield, window run channel, etc. Truck was ordered new from Dallas OR dealer with all the Cameo options, big back window, etc. 9.22x5 tires and spent its life hauling fruit down to the packing plant, 20613 actual miles, $6500; Russ Shorten nnn-nnn-nnnn (Dayton WA)
1957 Chevrolet 283, turns over, heads and intake manifold stored inside, $100 cash; Mike nnn-nnn-nnnn (Puyallup WA)
1960 DeSoto Fireflite four door sedan, $1500 spent on body work and shooting it with primer by previous owner, stainless trim removed before work was done, but have it, engine and transmission are missing, $800. For a reasonable amount, engine and transmission available; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)
1964 Chevrolet Chevelle El Camino, ex-California car, very solid, bed is almost perfect, has V8 with Powerglide, interior is good, comes with original canopy, car sat for 30 years in a dry garage, has not run since, motor does turn over, floorboards, fenders everything very solid, would make easy restoration, hard to find a car in this nice of condition, clean title, $6700; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
1964 Corvair, 3 speed stick shift, does not run, $1500; James Messick nnn-nnn-nnnn (Linden CA)
1965 Ford F250, 390 engine not in truck, two inch body lift, limited slip differential, 4 speed transmission, body good, some rust at drip rail and front of hood, parked for 10 some years, non op papers, $1500; Don Newton nnn-nnn-nnnn (San Miguel CA)
1968 Chevrolet C-10, long box, 4 speed, positraction rear, 79 General Motors 292 motor included, $1500; Russ Shorten nnn-nnn-nnnn (Dayton WA)
1968 International dump truck, 5 yard, cab over, gas, 5+2, air brakes, runs but needs work, excellent box with subframe, title in hand, $1950 obo; Don Chappell nnn-nnn-nnnn (St. Helens OR)
1972 Chevrolet C-10, damaged long box with replacement box, new 31x15 tires on off set powder coated rally wheels, 350/4 speed, four wheel drive, Warn hubs, runs very good, $5750; Russ Shorten nnn-nnn-nnnn (Dayton WA)
1978 Ford step side 1/2 ton, 20000 miles on rebuilt 351M, truck runs well, new radiator, this is a fixer upper, needs TLC, hoping to find someone that wants a project truck. Have had this for 36 years (first vehicle), have not abused it, clear title, no tabs or insurance on truck, serious inquires only, can send pics via text, $9000 obo; Ron nnn-nnn-nnnn (Chehalis WA)
1980 Bronco, 4x4, 302 engine, ran when parked in garage some 14 years ago, non op papers, no body damage, only rust at bottom of tail gate, as is, $3500; Don Newton nnn-nnn-nnnn (San Miguel CA)
1990 F150, 5.8 V8, white, extended cab, 235k miles, runs great, virtually new rubber, new engine control module, snap on tonneau cover, $3000 obo; Pat Sorensen nnn-nnn-nnnn (San Ramon CA)
1998 Geo Metro, totaled, parts only, no wheels or tires, engine ran when parked, can load with a forklift, $300; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
AMF moped, vintage, use to carry Harley name also, needs restoration, motor turns over, good shape, but sat for many years in a barn, $275; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Corvairs, 1965 Monza 2D HT running, needs body work, does not have much rust, $2500. 1962 Rampside pickup, running, needs body work, $2500. 1965 convertible, basically in parts, many new parts for future install, clear title, $1500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford car parts, 1949-1951, have lots; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ford F-4, 1950, flat head V8, just under 29500 original miles, 2nd owner, it is nice, runs, drives, all original, $4000 obo, email for more information; Chris Jerue nnn-nnn-nnnn or xxxx@xxxx.xxx (Cheney WA)
Ford F703, 1966, heavy duty, rebuilt 350 V8 with 5 speed main and 2 speed rear, full air brakes and windshield washers, no rust, may have 1000 miles since rebuild, power steering, equipped to bumper pull or gooseneck, pull with electric or air brake systems, recent rubber on all window glass in/on cab. Would like to sell with 20 ft flat deck (wood) 2 axle HD 7500 lb axle with electric brakes on the trailer, 2-15/16 in hitch, $10000 obo; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford flat head motors for sale, early style with distributor down in front, $500 ea; Vern Fought nnn-nnn-nnnn (Exeter CA)
General Motors rear axle complete with pumpkin, believed to be from 50s vintage GM passenger car or perhaps an Oldsmobile, five lugs on 5 inch spacing, great original unit, unknown gear ratio, nothing fits better than an original GM part for your project vehicle, $50; Ray Dias nnn-nnn-nnnn (Hughson CA)
GMC trucks: 1954 Model 450 with Heil dump body. 1954 Model 450 flatbed (steel). 1952 Model 350 flatbed. 1952 Model 400 ten wheel can and chassis 5/3/2. 1948 Model 250 one ton panel. All have good sheet metal and runnable. Looking for serious buyers and reasonable offers; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Honda 55 Trail from the 1960s, no title, motor stuck, lots of good parts, $275; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International 1610, 1973, 20 ft van box truck, 345 cu in engine, 5 speed main, 2 speed rear, ready to work, $3500 obo; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Jeep cabovers, FC-170 cab and frame, not much else. FC-150 with engine (partially disassembled), transmission, etc. mainly parts vehicles, take them both for $300; Zack Peterson nnn-nnn-nnnn or xxxx@xxxx.xxx (Corvallis WA)
Lumber rack, custom built, fits 1976 F150, $350; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)
Pickup utility box canopy, 6’4”x9’3”, shelves on each side, no tail gate, overall good condition, can send photos, $500; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Stewart J2B5 carb, brass, No. 929077, Detroit Lubricator Co., patent 11-28-11, good condition, $50; Dave nnn-nnn-nnnn (Aurora OR)
Wanted: 1947-54 Chevrolet/GMC 3800 series one ton pickup; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Wanted: 1960s Dodge Power Wagon in running and driving condition; Tanner Remillard nnn-nnn-nnnn or xxxx@xxxx.xxx (Pendleton OR)
Wanted: Kaiser Henry J cars and parts, all conditions considered; Mark Willanger nnn-nnn-nnnn (Mt. Vernon WA)
Whippet parts, front axle, has been altered, has hubs, wheels and hub caps, make offer: Del nnn-nnn-nnnn (Prairie City OR)
White truck parts, late 40s/early 50s, nice radiator shell, radiator and grill. Also hood panels, headlight pods. Rear end equipped with air brakes and transmission from a late 40s rig, plus a bin full of engine stuff, all for $850, cash in Puyallup WA; Mike Roberts nnn-nnn-nnnn (Puyallup WA)