July 2013 - Engines & Parts For Sale

All Classified Ads

American MARC 1 cyl air-cooled diesel, new, never used, made in Englewood CA, early ‘50’s or ‘60’s, $600; Buck Evans nnn-nnn-nnnn (Greenville IL)

Black Bear 25 hp oil field engine on ABU 10K# 14’ double axle flatbed trailer. Shop # E 1259 built by Oil Well Supply Co. in 1928. 64” open spoke flywheels, bore, 11 inches, stroke, 18 inches for 1760 c.i.d. WICO OC, Ajax feedwater pump. Roller cam drives 4” valves. Flat belt driven Pickering fly ball governor controls exhaust valve latch for hit and miss operation. Air tank and flywheel driven compressor maintain 100 psi pressure for easy air starts. Two 4” chrome stacks, one for conventional valve-in-head relief and another mounted at the rear of the cylinder for savaging ports opening at the end of each power stroke. Show ready. Comes with copies of original owners and parts manuals and sales literature (circa 1928) $13,000; Doug Brookens nnn-nnn-nnnn or xxxx@xxxx.xxx (Issaquah WA)

Bullseye 6 hp sideshaft, type GE, sn 6647, 350 rpm, mag, oiler, with wooden battery box, with Underwriters Labs Inspection tag. $7,425. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Clutch Pulley: Clutch pulley taken off of 2-1/2 hp Famous. Great condition, $300. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Deutz 70 horse air cooled diesel engine, runs good, $800; Robert C Pierce nnn-nnn-nnnn (Omak WA)

Engines & Parts: Due to my back not getting any better, it's time to thin the herd of some of my engines. 5 hp Economy with Elkhart magneto: barn fresh look, some original paint left. On a nice heavy cart, has a new fuel tank and fuel lines, rebuilt igniter, $1600. 4 hp Novo type S project engine. Only flaw is a repaired Flywheel hub, but it was done right. All Painted, all there, just needs final assembly, repro muffler $750 obo. 4 hp Leader engine, older restoration, nice engine. $1200. John Lauson 1-1/2 hp, solid flywheels, with EK magneto, needs paint, $500. 2-3/4 hp Alamo Blue line on original cart, has the Wizard magneto set up. Older restoration, nice runner, $1250. Email for pictures. I can load a truck or trailer. I can also ship these as well for a small fee or bring to a local show. Open to offers, buy more than 1, and I will discount the prices; Craig Mathews nnn-nnn-nnnn (Northridge CA)

Engines: "Close out sale. All items negotiable!" 3 hp Fairbanks Morse, good shape but stuck, $150. Lalley Light Plant, it was free but appears to have no compression, the crank with it, $125. 9 hp B&S, runs, $25. 5 hp B&S, new, $120. Wisconsin BKN, runs, has mag. Wisconsin AB, runs, has mag. Rare 4 cyl Wisconsin inline air-cooled, was sold by Montgomery Ward. The ID tag is with it, $75. IH single cylinder engine, $50. Wisconsin V-4 engine, good shape; Bill Evans nnn-nnn-nnnn (Lacrosse WA)

Fairbanks Morse 2 hp good running engine gas tank leaks, $275; Mike Cristler nnn-nnn-nnnn or xxxx@xxxx.xxx (Zamora CA)

Foos 6 hp, wipe spark, hopper cooled. Restored on original cart, $16,500; Dick Watson nnn-nnn-nnnn (Gridley CA)

For an engine cart: four larger engine cart wheels for sale, with stub axles. These will be going to the salvage yard soon if not sold as I have to do some cleaning up; Bob Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cedarville CA)

Igniter for a 6 hp Fairbanks Morse, $150; Jose Salazar nnn-nnn-nnnn (Albuquerque NM)

IHC McCormick Deering M 3 hp 1929 stationary engine with cart. Sn BW 18940. It is in good original condition (or older restoration). We have had it approx. 15 years, & has been stored inside out of the weather. Runs good overall. $600 obo; Dan nnn-nnn-nnnn (Sherwood OR)

IHC Mogul 2 1/2 hp. Some original paint, mag and it turns over, $1500; Dick Watson nnn-nnn-nnnn (Gridley CA)

IHC Tom Thumb painted and on cart, $1500; Dick Watson nnn-nnn-nnnn (Gridley CA)

Ingeco AK 2-1/2 hp, sn 5445, runs great. $1,320. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

John Deere Model W stationary engine, 1948, completely rebuilt, please e-mail for pictures. Asking $6500 Thanks for looking; Thomas Weatherford nnn-nnn-nnnn (Big Island VA)

John Deere W power plant in excellent restored condition. Built 1936. Starts & runs good. Mounted on steel wagon, $6000; R. Edwards nnn-nnn-nnnn or xxxx@xxxx.xxx (Villa Park CA)

John Deere Waterloo Model K 4-1/2" bore 9" stroke 3HP? Igniter is drilled for a plug, no mag, otherwise seems to be all there. Possible delivery to Brooks Swap Meet June 21; Jim nnn-nnn-nnnn Mountain time (MIssoula MT)

Lister diesel engine. 2 cylinder, made in England. 20 horse power, $1200 obo; Jonathan Jude nnn-nnn-nnnn (Dorena OR)

Novo: 2 HP NOVO S parts 2 Engine valve cages 2 Engine valve cage nuts, great shape, 1 Piston 1 Crankcase breather; Bob Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cedarville CA)

Palmer model LLH marine engine. This engine came from an aluminum double ender life boat that my friend Ridley attached a sling on bow and stern lifted with forklift, promptly folding the boat in half. Has F-N-R transmission ready for your boat, $400; Bud Tuttle nnn-nnn-nnnn (Solano Co CA)

Red Seal power unit, with F 162 Continental engine. Engine is loose, mag has spark. Twin-disk hand clutch with flat belt pulley. Tin in good shape with side curtains. Crank start. Not running but looks like easy restoration, $250; Jon Rodgers nnn-nnn-nnnn (Sonora CA) [link to photo]

Rider-Ericsson 8" hot air engine on skids. Good condition. $7500; Dick Watson nnn-nnn-nnnn (Gridley CA)

Sattley 3hp hit and miss engine. Nicely restored. Runs great and show ready. It is on a nice Allied Machine Welding "Big Boy" cart which is included ($400 value). Email for pictures if desired. Pick up only. $900 obo; Larry DeLeon nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Stover 4hp K, sn KG204639. Beautifully restored, hunter green with orange trim, custom made cart. Runs great! $1250 obo. Will email pics; Roland Cobb nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

Stover-Freeport, 5 hp, 1910 Hit & Miss - Igniter. Completely gone through. New paint & pin striping. On custom made steel drop center cart with cast steel spoke wheels. Show ready, pictures available, $1250; Dale Somers nnn-nnn-nnnn (Medford OR)

Wisconsin 4 cylinder model AC-4 straight inline, bore 2-5/8x 3-3/14, sn 25312. The top half was taken off. It’s all there, $400 obo. Also a single cylinder Wisconsin, $200 obo; Gary Goulart nnn-nnn-nnnn or xxxx@xxxx.xxx (Citrus Heights CA)

Wisconsin single cyl, $50; George Northcutt nnn-nnn-nnnn or xxxx@xxxx.xxx (Klickitat WA)