October 2013 - Engines & Parts For Sale

All Classified Ads

Collection of engines, all on custom carts: Fairbanks Morse 3 hp Z, $700. Fairbanks Morse 6 hp Z, $1000. IHC Famous hopper cooled 4 hp, $5000. IHC Famous vertical, 2 hp, $4500. New Holland 3 hp, rare, $5500. Weber 6 hp G, $3500. Bullseye 2 hp, $5500. Associate Chore Boy, 1-3/4 hp, $2000. Associated Hired Hand 2-1/2 hp, $2000. Cat Ten, $4500. Package deal: all for $24000. Pictures of engines can be seen at http://hitnmiss.lonax.com/ ; Glenn Crockett nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Complete Buzzsaw outfit, nothing stuck! Could be made to run in an hour. Associated 6 Mule Team, Chore Boy powered, sn 609679. On rolling wagon, with iron wheels, $3000; Tom & Susan Street nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR)

Continental F226 six cylinder gas engine, governed. Runs good, $225; Tom Whitehead nnn-nnn-nnnn or xxxx@xxxx.xxx (Sixes OR)

Cushman, 4 hp, 1928 vertical engine, in excellent condition on 4-wheel cart, $700; Jim Murdock nnn-nnn-nnnn (Arroyo Grande CA)

Engines: IHC/McCormick-Deering 1-1/2 hp, runs, $375. Fairbanks Morse 1-1/2 hp headless, good condition, $350. F-M 'Z' 3 hp, complete $425. F-M 'Z' 6 hp complete and running, has crank guard, $750. International LA, complete, has extended water hopper, $250. Drag saw motor, has clutch and flywheel, no welds and not stuck, $100. 12" cast iron wheels, 6 spoke, no cracks or welds. 4 wheels, plus axles and bolsters/risers for $125. Open to offers; Ray Bathrick nnn-nnn-nnnn (North Bend OR)

Fairbanks Morse 10 hp diesel, model Y, 1926, complete & in excellent condition, on a new trailer, $4500; Jim Murdock nnn-nnn-nnnn (Arroyo Grande CA)

Fairbanks Morse 1-1/2 hp headless hit 'n' miss gas engine, 1916, sn 211092. Restored & runs great with Sumter No. 12 magneto, $1200; Richard Borgaro nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA) [link to photo]

Fairbanks Morse 1-1/2 hp Z D, sn 759950, 1930. Complete, running, and all original except for the muffler, no cracks or welds and has not been painted, $400. Please email for pictures; Mark Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)

Fairbanks Morse 25 hp diesel, 1919, in excellent condition, ready to show, on an excellent trailer, $9500; Jim Murdock nnn-nnn-nnnn (Arroyo Grande CA)

Fairbanks Morse 36 hp ZC, 739 cu in, condenser cooled, clutch pulley, magneto ignition, excellent running condition, $3000; Gene DeCamp nnn-nnn-nnnn (Cottonwood AZ)

Fairbanks Morse 4 hp H on an iron wheel cart. Embossed name on the hopper. 1914. All this engine needs is a trip arm to make it run. No magneto on it. Can send pictures. Asking price $1500; Ron Ludford nnn-nnn-nnnn (Auburn CA)

Fairbanks Morse 6 hp Z, igniter style, 1916. Good runner, older repaint, needs new wood skids. No mag, runs good on low tension coil. $675 or trade for nice smaller flywheel engine, prefer 1-1/2hp John Deere on cart. PLEASE do not text me, I prefer email contact.; Scott Denman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

Fairbanks Morse 6 hp, 1918, excellent & complete, on cart, $2900; Jim Murdock nnn-nnn-nnnn (Arroyo Grande CA)

Great project: almost complete Ottawa ES drag saw, sn 4895. The good: engine is free and has all the parts to make it run / saw and has the saw blade. The bad: it is missing the magneto and the mag bracket has been welded. There are several welds on the block base all look good and the exhaust valve is stuck in the head. The only other parts missing are the rear axle assembly and the log hook/winch. You would have to make new skids for the saw but the wood dimensions are available online. $350; Mark Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)

IH 1-1/2 hp M engine, selling as parts. Needs fuel mixer, gas tank, mag. Engine turns over, $200; Jim Gardner nnn-nnn-nnnn (Vernonia OR)

IHC 3-5 hp, 1948, complete, running, and all original. The fuel tank has been repaired, $400; Mark Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)

International Harvester Co LB 1 - 2 hp, 1942. Does not have the correct fuel tank and is missing the valve cover otherwise it is complete and original. The engine runs great and has a duel flat belt V belt pulley, $300; Mark Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)

McCormick Deering M 3 hp, 1929, stationary engine with cart, sn BW 18940. It is in good original condition (or older restoration). We have had it approx. 15 years. Has been stored inside out of the weather. Runs good overall, $550 obo; Dan nnn-nnn-nnnn for details or to see, photos available (Sherwood OR)

Misc engines: Fairbanks Morris 7-1/2 hp with R mag, $700; Hercules 5 hp with Webster mag, in parts, $500; Moline 2-1/2 hp (stuck valve) $500; Cushman Binder 3 hp (stuck), $200; Witte 5 hp $500; Fairbanks Morris 3 hp ZC, $500; Fairbanks Morris 3 hp (stuck without mag), $300; Detroit Engine (call for details); Parts for an R and V, Aermotor, Fairbanks Morris, Cushman. Magnetos, oilers, grease cups and some cast iron wheels; Robert Adams nnn-nnn-nnnn (Fresno CA)

Novo, 3 hp, 1922, excellent & complete, on cart, $650; Jim Murdock nnn-nnn-nnnn (Arroyo Grande CA)

Stover K, 1917 hit 'n' miss gas engine, sn 98396, runs great with Webster mag. Has original brass Krakauer, Zork & Moye dealer tags on front of engine. Also has 165 rpm slow-speed cream separator pulley, $1400; Richard Borgaro nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA) [link to photo]

Superior 25 hp side shaft engine. Engine is mounted on a heavy wagon, ornate engine information painted on the water tank, has Wico OC mag and tool box. This engine has a Fairbanks air-cooled pony engine for easy one man starting. Flywheels measure 5'5" across, weighs 8400lbs. Nice large engine, asking $7500. For more information or pictures, call; Terry Christner nnn-nnn-nnnn (Molalla OR)

Two engines: Arco 12 hp vertical, runs on hot tube or propane. Made in 1898. Very hard to find. Also Fairbanks Morse 2 hp 1903 "Jack of all trades". Both engines on one new trailer, all in excellent condition, $12,000; Jim Murdock nnn-nnn-nnnn (Arroyo Grande CA)

Waterloo Boy, 4-1/2 hp on a cart. 1913. This is a running engine with a new rebuilt Webster magneto. Can send pictures. $2500; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Western 18 hp, 1906, all original, on a new trailer. Very rare engine, runs on gas, ready to go, $12,000; Jim Murdock nnn-nnn-nnnn (Arroyo Grande CA)

Wisconsin THD 2 cylinder 3 1/4" x 3 1/4" bore and stroke, 12 volt starting and ignition, fuel pump with primer lever, governor, muffler, oil bath air cleaner, oil bath over the center clutch, 4 B-groove taper lock 4 3/4"drive pulley, remote fuel tank, 11"W x 13"L x 9"H. New plugs, distributor and carburetor kit, fresh oil. Belt guard and fuel tank support brackets, hand crank. Starts and runs good. Best offer. Lynn nnn-nnn-nnnn (Philomath OR)