2004 Hard to find Bumper Pull 34 foot Enclosed Cargo trailer triple axle, 8 lug, built very heavy duty. inside finished with plywood, ceiling is 7-1/2 feet tall, electric jack, good tires, 2004 built by United, has some scraps and dings but overall in very good shape, $12,900 or make reasonable offer. Was pulled cross country with a one ton dually full a few times then been sitting most it life; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)
3-point implements: Disk approximately 6'x6'. Also a 3-point landscapers rake approximately 5' wide. Both in working condition. Great for grooming an arena or putting in a winter garden. Will send pictures if interested; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Air compressor - Sullivan Compressor on a wagon with rubber tires. Engine turns over and is complete with magneto and carb. Unit has a V4 compressor and has been kept in a barn, protected from the weather. It has a very nice riveted air tank with valves and oiler. It was used in mining and we think it was built in the 1930's. $2500. See pictures; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Air compressor, Curtis Model C-96: 2 stage, shop or portable, commercial compressor. Belt guard 3 (B) belt pulley, 7-3/4". Channel base for compressor. Can be used as a constant run portable or shop compressor, $300; Lynn Abraham nnn-nnn-nnnn (Philomath OR)
Air compressor: Gardner Denver 2 cylinder air compressor. Stands 3 feet tall and has a single 19 1/2 inch crowned face flywheel. Compressor is free and has been stored indoors, $300 obo; Kim Kestler nnn-nnn-nnnn (Reno NV)
American Clipper 49 B, museum quality, $1500; Klein Tractor nnn-nnn-nnnn (Rainier OR)
Antique cotton planter (yard art) $100; Robert Adams nnn-nnn-nnnn (Fresno CA)
Arbors: Two large lathe fly-cutting arbors. One arbor has sliding cutter head, 2 cutters optional. Other heavier duty arbor has an adjustable cutter in the middle, adjustable from the opposite end of the cutter tool. Best offer; Lynn Abraham nnn-nnn-nnnn (Philomath OR)
Baler engine: Rebuilt C123 baler engine IH valves ground, head resurfaced, valve covers, manifold, carb, air cleaner, generator with bracket, fan, water pump, radiator with brackets, front radiator screen, ready to go, $800; Roger nnn-nnn-nnnn (Redding CA)
Black & Decker hard seat valve grinding set with stones, pilots & stone dresser, $100; Ron Fogle nnn-nnn-nnnn (Puyallup WA)
Black walnuts: washed, clean & ready to crack. 5# for $15 plus shipping; JH Keith nnn-nnn-nnnn (Hermiston OR)
Blade: 3 pt. 6 foot blade. Heavy duty, angles left and right $225; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Blocks and cables, heavy duty, $25. I have several large blocks, hooks, choker cable etc. I would like to get $25 each for the large blocks and cable $15 for the smaller blocks. I will throw other hardware in if you take all. Photo available by e-mail; Ron nnn-nnn-nnnn or Ron xxxx@xxxx.xxx (Shingletown CA)
Boom lift: used JLG boom lift. 30 foot maximum height. Finished my project; ready to sell; Fred nnn-nnn-nnnn or xxxx@xxxx.xxx (La Grande OR)
Camper top: for 1965 - 1997 Ford full bed camper top. Plastic, in excellent condition. Used maybe 2-3 times. Includes battery operated light and securing brackets, $400 obo; Nick Neuburger, evenings nnn-nnn-nnnn (Galt CA)
Canning jars and bottles: my collection of approximately 200 pieces of old glass, $300 for all; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Case sign, measures 71-1/2"x29-1/2", $850; Ron Bledsoe nnn-nnn-nnnn (Chicago Park CA )
Cockshutt tractor manuals: Original operators model 30 and Coop E-3, parts manual, all fuel models, hyd & cultivator manuals; Al Barkl nnn-nnn-nnnn (Elko NV)
Copper heat exchanger, $35. This copper core heat exchanger has never been used. It is 24x17x5 inches and has three quarter inch copper tubing for connecting to supply. I have two of them and will sell both for $65. Photo available by e-mail; Ron nnn-nnn-nnnn or Ron xxxx@xxxx.xxx (Shingletown CA)
Cultivators: John Deere 600 series front and rear cultivators for JD Models A, B & G. Call Joe or text questions to nnn-nnn-nnnn (Escalon CA)
Delco Light Plant, not running, $200; Mel Freitas nnn-nnn-nnnn (Galt CA)
Disc: 6 ft old pull-type cover crop disc and 10 ft pull-type tandem disc, no wheels on either; Steve Hess nnn-nnn-nnnn (Dayton OR)
Extension cord, heavy duty: This is 17 ft. of 4/6, 50 amp power cable, suitable for R/V hookup, welder etc, $25. Photo available by e-mail; Ron nnn-nnn-nnnn or Ron xxxx@xxxx.xxx (Shingletown CA)
Farmhand loader, fits H & M, etc, $100; Al Barkl nnn-nnn-nnnn (Elko NV)
Floor Jack: Large 4’ long floor jack, works, not sure of size, 5 ton? $50. Photos by email; Dave Erickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)
Fuel tank, 240 gallon with stand & hose; Al Barkl nnn-nnn-nnnn (Elko NV)
Fuel/water stand mount: steel, 5 ft high, will accept round tanks, 36" round x 60" long, plus two 55-gallon drums below, $150; Nick Neuburger, evenings nnn-nnn-nnnn (Galt CA)
Gear oil pump, fits on 5-gallon can, $20. Hand oil pump, mounts in barrel, crank works piston (an antique), $25; Ron Fogle nnn-nnn-nnnn (Puyallup WA)
GMC 671 power unit, complete, $750; Mel Freitas nnn-nnn-nnnn (Galt CA)
Grain drill: John Deere iron wheel grain drill possibly Van Brunt. Working condition, $350; Harold Heia nnn-nnn-nnnn (Seattle WA)
Grain drill: Oliver 12 ft with fertilizer hoppers, $400; Mel Freitas nnn-nnn-nnnn (Galt CA)
Hay rake: 1950 Ford Dearborn Model 14-40 side delivery hay rake. Excellent working condition. New correct Ford Vermillion red paint and vintage Dearborn decals, new bearings replaced as needed, and all new teeth. Great for small hay operation or show/parade behind small tractor (Ford 8N, 9N etc), $1,300 obo; Richard Markley nnn-nnn-nnnn (Gardnerville NV)
Hay rakes: have 2 antique hay rakes, both are 10 feet with steel wheels, $200 each; Robert Carlson nnn-nnn-nnnn (Gresham OR)
Hay rakes: New Idea on tall rubber tires, $125. John Deere on tall rubber tires, $125. Massey Harris on steel wheels, $150. Yard art; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Heavy duty Sioux hard seat stone dresser Cat # 17L9A, $100; Ron Fogle nnn-nnn-nnnn (Puyallup WA)
Hitch: 3pt hitch for Farmall H, $300; Paul nnn-nnn-nnnn or nnn-nnn-nnnn (Yucca Valley CA)
Hoist: 3-ton engine hoist, good condition, $50. Photos by email; Dave Erickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)
Iron wheel axle set: Used for large wagons; front axle is king pin configuration. Rear axle is straight. These are heavy axles; will support 20-40hp engines. Will send pictures if interested.; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Jack hammer with deadman post drill. Used in tunnel mining. It is an air operated hammer with screw adjustments for the drill head. This is really really old. The hammer swivels on the deadman post. She is a very heavy unit. Will send pictures if interested; Ron Ludford nnn-nnn-nnnn (Auburn CA)
John Deere sweep rake. No wood but pretty complete iron. Was mounted on a B and later an A when I was a kid. I have a complete one on my H in the museum collection and don't need the extra one. Don't want to scrap it but feel there is $250 worth of useable iron plus scrap. Might trade for antique bicycle, scooter or cycle parts; Miracle of America Museum nnn-nnn-nnnn (Polson MT)
Lewis Power Saw Winch: spool full of 3/16" wire rope plus 100' of 3/16" wire rope (tag-line) and tree strap, 3/4" plywood storage box. No saw, $400; Lynn Abraham nnn-nnn-nnnn (Philomath OR)
Lincoln welder v4, Wisconsin hand crank, leads, $750; Klein Tractor nnn-nnn-nnnn (Rainier OR)
Manure spreader: 1950's International #100 manure spreader ground drive, good condition, all original, $950; Harold Heia nnn-nnn-nnnn (Seattle WA)
McCormick-Deering cream separator. Crank style, 99% complete floor model, $200; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Military landing mat, 23’, good condition, $75; Irvin Baker nnn-nnn-nnnn (Ripon CA)
Mining ore car. Turn of the century. Truax Manufacturing, SF. Very good condition. She's just an old ore car, not dented or abused. Will send pictures if interested; Ron Ludford nnn-nnn-nnnn (Auburn CA)
Mower: Farmall Cub sickle bar mower, (needs pitman arm stick), $75; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Mower: International Harvester 4' mid mounted rotary mower for Farmall Cub. Drives off tractor PTO, $185; Jim nnn-nnn-nnnn (Bremerton WA)
Mower: John Deere #5 mower rear mount 7 ft bar, been used very little, $100; Eldon Kerns nnn-nnn-nnnn (Goldendale WA)
Mower: John Deere #5 mower with hydraulic lift; Steve Hess nnn-nnn-nnnn (Dayton OR)
Mowers: McCormick Deering horse mower, steel wheels, $150. Massey Harris sickle bar mower, $150. International sickle bar mower for A, $150. Woods rotary 6 ft model 306, under-tractor mount, $150; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Murphy diesel engine and radiator and clutch 4cyl weighs approx. 5000 lbs. Came out of a Northwest 25 crane. Good running condition, $3975; Don Chappell nnn-nnn-nnnn (St Helens OR)
Oil Co delivery tanks. 3 oval fuel tanks 42” wide, 30” high, 34” long joined together plus trap at back. Total length about 11 feet. Tanks appear to be good. 2 brass 2” fill plugs on top. Has side rails. I have seen these style tanks on old trucks at shows. $500; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Oliver side-delivery hay rake with rubber tires, 1930’s (?); Steve Hess nnn-nnn-nnnn (Dayton OR)
Ore Car: This ore car was built by an FFA student here in the gold country back in 2007. He did an excellent job of recreating an original design. This is an end dump car. Will send pictures if interested; Ron Ludford nnn-nnn-nnnn (Auburn CA)
Pallet racking shelf runners, heavy runners $20 each, light ones $5 each, tear-drop type; JH Keith nnn-nnn-nnnn (Hermiston OR)
Part washing tank for solvent, has meter & pump, $20; Ron Fogle nnn-nnn-nnnn (Puyallup WA)
Plow: Allis Chalmers 4 bottom plow, 2 bottom extension available, $1000; Klein Tractor nnn-nnn-nnnn (Rainier OR)
Plow: Two-way IHC Chattanooga hillside walking plow, $300; Buck nnn-nnn-nnnn (Greenville IL)
Plow: Two-way Syracuse plow for a M model John Deere $525; Dave Gallant nnn-nnn-nnnn (Boring OR)
Plows and disks: All plows are old steel wheeled trip plows, 1 bottom Case plow, 2 bottom IHC plow, 4 bottom 16” Oliver plow, heavy 8’ tandem cover crop disk, 6’ tandem disk, loading on your trailer or truck is no problem, priced to sell at $100 to $150 price range; George Best nnn-nnn-nnnn (Beaverton OR)
Plows: International 3-bottom on rubber, hydraulic lift, needs repair, $150. John Deere 3 pt 2-10 bottoms, $150; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Plows: John Deere 1-bottoms with all mounting brackets for H, $300 Two L/Las for $200 and $150. Farmall Cub complete 2-way, $150. Avery V plow, $100; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Plows: Two 3-16 pull type plows on steel wheels. One is Massey Harris, the other brand unknown. Also one pull-type one-bottom plow on steel wheels; Steve Hess nnn-nnn-nnnn (Dayton OR)
Professional hot water power sprayer on wheels. Burns propane, needs some work $75; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Pump: StaRite, 1-1/2 hp water pump, recently refurbished and runs well. It is controlled by a pressure switch. Photo available by e-mail. $195; Ron nnn-nnn-nnnn or Ron xxxx@xxxx.xxx (Shingletown CA)
Safes (3) to store your valuables: Diebold 56" wide, 36" deep, 81" high, double door on wheels, $1075. 39" wide, 28" deep, 70" high, double door on wheels, $875. 27" wide, 27" deep, 64" high, single door on wheels, $775; Don Chappell nnn-nnn-nnnn (St Helens OR)
Sewing machine: Nice Singer model 221 feather weight sewing machine in original carrying case, $550; JH Keith nnn-nnn-nnnn (Hermiston OR)
Shiv Pulley Wheel: Overhead for a vertical mine head frame. 52" diameter. Weighs alot! Two smaller shiv wheels approximately 24-30" diameter. Also 200-300 feet of mining rail, some 20# and some 30#. Will send pictures if interested; Ron Ludford nnn-nnn-nnnn (Auburn CA)
Storage tanks: Heavy duty for fuel etc. 300 gallon $195. 1300 gallon $845. The larger tank can be separated into 300 and a 1000 gal tanks which are bolted together. Photos available by e-mail; Ron nnn-nnn-nnnn or Ron xxxx@xxxx.xxx (Shingletown CA)
Sulky, in great condition. Stored in barn approximately 85 years in Grass Valley, CA, $875; Ron Bledsoe nnn-nnn-nnnn (Chicago Park CA )
Surrey wagon, running condition. Wicker seats in excellent condition, $2000; Joe Pereira nnn-nnn-nnnn or Leta nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA)
Tank: 240 gallon gas tank on stand with hose; Al Barkl nnn-nnn-nnnn (Elko NV)
Tool box for full size pickup with two locking top lids, $45; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Track grease pump, holds about 3 gallons. Has button fitting. Alemite brand, $50; Ron Fogle nnn-nnn-nnnn (Puyallup WA)
Trailer: 12 ft tilt bed trailer with eight 25x20” single tires; Steve Hess nnn-nnn-nnnn (Dayton OR)
Trailer: 18 ft Titan flatbed trailer with long ramps, 12,000 GVW, $5000; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)
UTB Power Unit off #55 baler, no radiator, had 90 degree drive for 4” belt, not stuck, located in Stockton CA, $700; Gary Wiechman nnn-nnn-nnnn or cell nnn-nnn-nnnn (Petaluma CA)
Water wagon: Iron Wheeled, very old. Three compartment tank. The tank came from a delivery fuel truck and was put on the iron wheeled wagon which were the wheels and frame from a large old compressor wagon. Will send pictures if interested; Ron Ludford nnn-nnn-nnnn (Auburn CA)
Welder: 180 Amp DC Lincoln Stick Welder, 2 Cyl. Wisconsin Model TF. Hand crank, Stored inside with drained gas tank, hasn’t been started in a while, $120; Dave Erickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)
Welder: Lincoln 300 special, V4 Wisconsin, leads, used last summer, hand crank, $650 obo; nnn-nnn-nnnn (Rainier OR)
Winch: double drum Hyster winch, fits Cat 30, $1300; Gene nnn-nnn-nnnn (Davenport WA)
Windmill: 8 ft Aeromotor windmill in excellent condition. No tower, with 2-1/2” pump. No bullet holes. $1500 or will trade for 4-6 hp hit & miss engine in equal condition; Ed Permenter nnn-nnn-nnnn (Leggett CA)