1929 International 6-speed Special Truck (Cab & Chassis). Runs and drives, original condition with new front tires and wood spoke wheels. Needs a bed and some work on the cab. Would make a great show or parade truck if restored. Owned since mid-1990’s and has always been stored inside. Asking $8500 obo; Dan nnn-nnn-nnnn for details or photos (Tigard OR)
1937 Chevrolet truck, Series SB, 131.5” WB, 216 engine loose, 7.50x20 tires. Complete truck, $1250; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)
1942 WW2 Chevrolet Military Trucks. I have three 1-1/2 ton front wheel drive trucks. One has a military Hercules dump bed. Others have military cargo beds. Two trucks run with Idaho titles. The other one is 90% complete. (No title, sold as parts). The beds are steel and in fair condition. Also have many extra parts, (some new) including fenders, cab, radiator, engine, and more. Would like to sell it as a lot but would consider selling trucks individually. If interested come look at them. $8,000 or make a reasonable offer; Chuck Tillman nnn-nnn-nnnn (Nampa ID)
1944 WW2 Military MB Willys Jeep. Runs, needs restored, has Idaho title, $2,850; Chuck Tillman nnn-nnn-nnnn (Nampa ID)
1948 Red Chevy 1 ton. Dually. 12 volt. Hydraulic lift, 270 GMC 4 speed, 8x8 all steel bed. Dana 370 rear end, tubeless tires, new king pins, bushings, front brakes. Runs good. Needs minor body work and assembly. Pics available. $4500 obo; Ed King nnn-nnn-nnnn (Stockton CA)
1950-51 Studebaker bullet nose fenders and hood. The fenders are complete with inner panels, $300 or will separate; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)
1951 Buick Special Sedan straight eight car. Nice unrestored desert body with rebuilt engine. Lots of spare engine and transmission parts, $2000; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
1951 Ford Cab Over with all chrome and extras, $1000. Rebuilt 460 Ford and rebuilt C6 for an additional $1000; Robert Adams nnn-nnn-nnnn (Fresno CA)
1953 International L-120 engine & transmission, $100 each; Buck nnn-nnn-nnnn (Greenville IL)
1957 IH Golden Jubilee A110 pickup. One of the rare Gold and White Anniversary trucks, built by the International Harvester Company May 31,1957. It runs and drives (not street legal-needs gas tank to be cleaned out and recoated), but we have rebuilt the brakes and wheel cylinders. Has a BD-220 6-cylinder engine with T-1 manual 3-speed transmission. Also comes with chrome bumpers, chrome grille insert and gas cap assembly. Has hydraulic brakes, dual electric horns, dual chrome cowl mirror, dual electric wipers, tinted glass, heater & defroster. Includes Line Setting Ticket and original Operator’s Manual. Also included with the truck are numerous parts needed to complete restoration including stainless steel trim strips, headlight besels, new rear tail lights and most of the emblems. A great project for someone who wants a rare truck for their collection. Fully restored these can be worth $30-$50,000 (one recently sold at a Mecum Auction for $52,000); Dan nnn-nnn-nnnn for details or photos (Tigard OR)
1962 Corvair rampside, running, 4 speed, many dents and dings, no serious rust, many new parts, auto engine; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1963 Corvair van, have 2. One mostly complete, not running, basically rust free. One 1963 Corvair van, complete, not running (was running), quite nice, many new parts; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1963 GMC 4000 305 V6, 4+2 gears, good running truck, no serious rust; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1963 Studebaker “Zip-Van”, completely re-furbished with re-built 270 cu. in. engine. Only built one year. Very unique unit. Weighs 3,000#, 90” high, 15’ long. $7,500; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)
1964 Corvair engine running take out, complete, perfect for high performance buggy or for an EAA project power plant; $400; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
1966 Ford F703, rebuilt 330 V8, recent clutch, air brakes set up for 5th wheel or bumper pull. Nice truck, no rust, new rubber gaskets on all windows; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1968 Continental Mark III, July 1968, body is good, needs timing chain, front seats leather needs repair. New parts for restoration in trunk, $2300; Lorry Dunning nnn-nnn-nnnn (Davis CA)
1973 International 1610, with 20 ft van box, 345 cu in engine, 5+2 gears, ready to work, good tires; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1977 Chevrolet Silverado short box half-ton 4x4, 400 cu.in. Automatic trans, 110,000 original miles. Factor 2” lift. 12” wide Ralley wheels. Needs restored, $4000 obo; Daryl nnn-nnn-nnnn (Acme WA)
1983 Dodge Rampage. No dents. New motor. Has electrical problem, $5000; Joe Pereira nnn-nnn-nnnn or Leta nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA)
1989 Alfa Romero sports car, very nice, very clean, hard top/soft top. 5 speed standard transmission, $6250 or trade for nice gas engine; Charlie nnn-nnn-nnnn (Merced CA)
Collection of antique trucks for sale including (1) '47 Ford complete with bed and motor, (3) '56 Ford trucks, (1) with a 3 axle dump bed, (1) each Diesel Diamond T and Diamond Rio trucks. Photos available on request; Don nnn-nnn-nnnn, prefer email contact: xxxx@xxxx.xxx (Fallon NV)
Dodge 1/2 ton WWII truck parts, what do you need?; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Dodge slant six engine complete. Engine includes a transmission and an overdrive, engine is a rebuilt running take out, $500; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
F-head Jeep cylinder heads (2), $50 each; Joe Brick nnn-nnn-nnnn (Klamath Falls OR)
Ford Model T top bows, fit 1917 to 1924, $95 or make offer, also some other Model T parts; Dave Gallant nnn-nnn-nnnn (Boring OR)
GMC 6V92 engine, 335 hp, starts & runs good, priced to sell, $1500; Terry nnn-nnn-nnnn (Greenacres WA)
Harley Davidson 1981 FXWG Shovelhead. Handlebars need wired and the front brake disks could stand to be replaced. Runs strong, shifts and rides great. Not a completely stock bike but nice shape. Email for pictures, $6500; Tanner Remillard nnn-nnn-nnnn or xxxx@xxxx.xxx (Kennewick WA)
International Scout take-out engine, slant 4, (half of V-8), with tranny & transfer case, includes generator & new Holly carb, $350 obo; Steve Fromhold nnn-nnn-nnnn or cell nnn-nnn-nnnn (Graham WA)
Mag wheels: four cast aluminum mag wheels with Jeep hubcap. 6 hole bolt pattern, 2-3/4" distance apart, complete with mounted tires 65-70% rubber, $250; WF Henderson nnn-nnn-nnnn (Sheridan OR)
Military 2-1/2 and 5 ton truck 5 and 6 lug Budd rims and useable tires; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Samson trucks. I have 2 Samson trucks, one is mostly complete including wooden C cab, the other is an engine, radiator, transmission, chassis, and axles. Both trucks will need a full restoration, they are both somewhat apart. Both trucks are the smaller 3/4 ton model. 1 truck could be built from the two, $3250 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Studebaker hoods (2) and trunk lids (2) for a late 40’s –‘48-49?- Champion and ? $75 each obo; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)
Vehicles: 1949 White cab-over truck, no rust, first year for tilt cab. 1920's Garford truck with rebuilt engine, hard rubber wheels. 1920's Republic truck, hard rubber wheels. 1948 Chevrolet 1-ton with 9 ft pickup box, new tires, new chrome, new paint. Lots of new parts. Runs very nice, very hard to find, few made. 1921 Ford model T touring, runs. Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
Wanted: Mopar Dodge Plymouth 1962-1972 cars and parts buyer. Have cash and trailers can travel. Will buy anything from one piece to a barn full. Parts pieces project cars complete cars. Call me I will see if I can help you out.; Tom Humphreys nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Wanted: old Kenworth truck hood emblems, ones that were in front center of hood from 60s era on back. Also would be interested in the chrome handles used to open the hoods. Also looking for 1937 Chevy Coupe parts, mostly body parts, hood emblem, grille, etc; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Wanted: Peterbilt bubble nose truck. Looking for a Peterbilt 280/350 bubble nose cab over truck; Kim Kestler nnn-nnn-nnnn (Reno NV)
Wanted: Willys Overland station wagon with 6 cyl engine, 4 wheel drive in restorable condition; Jesse Mason nnn-nnn-nnnn (Tillamook OR)
Wheels: 5 snap ring truck wheels off 1947 Ford truck. 7.50/8.25 x 20, $250; Wendell Newman nnn-nnn-nnnn (Carson City NV)