200 large tractor patches, can be ironed or sewed on, great for shirts, hoodies, etc., priced to sell; Larry nnn-nnn-nnnn or xxxx@xxxx.xxx (Las Vegas NV)
Allis Chalmer M with hyd dozer, $950 obo; Lynn Pekarek nnn-nnn-nnnn (Chico CA)
Allis Chalmers B and Case VA parts including adjustable wide front axles; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Allis Chalmers B, 1950, restored. Reconditioned engine, like new tires, paint and decals the proper color for the year. Tractor was completely disassembled except the final drives and kept as original as possible. Pictures and more detail available on request, $3500; Dennis Kytola nnn-nnn-nnnn (Ridgefield WA)
Allis Chalmers HD 14C crawler, 1947, approximate date. Should go to an AC collector, it is the first crawler tractor built with torque converter drive. It has an Isaacson cable blade, Carco logging winch and nice canopy. Starts and runs. Powered with 671 GM diesel. All sheet metal in good condition, $4000 or offer; Paul Valentine nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)
Allis Chalmers HD3 crawler with loader & 3 rippers in rear, $6500 obo; Phil Morrison nnn-nnn-nnnn (Redmond OR) [link to photo]
Allis Chalmers WM, 1934, valves ground, tracks good, 15" pads, replaced steering clutch discs and crank start. Sand blasted and painted, $2300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Allis Chalmers WM, 1937, valves ground, cylinders honed, rebuilt carb, several steering clutch plates replaced, electric start, sand blasted and painted, $2750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Brake band, new, for John Deere 40C or 440-I, and rear belly pan for 440-I; J Keith nnn-nnn-nnnn (Hermiston OR)
Case 300 round nose, very nice unrestored tractor complete with Eagle hitch, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Case 310 G Diesel track loader. Rebuilt left final, rebuilt transmission, rebuilt track slack adjusters. Very nice canopy. Factory counter weight. Very good paint and undercarriage. Runs great; excellent for home owner with small acreage. Has bolt on blade, $6750 obo, some trade? Don Chappell nnn-nnn-nnnn (St Helens OR)
Case 430 gas industrial tractor comes with side mount brush hog and opposite side hyd tank and counter weight. Used for mowing shoulders on roads. Good tires and paint. Runs and operates well, $3975 obo, some trades? Don Chappell nnn-nnn-nnnn (St Helens OR)
Case backhoe less motor and less hydraulic pump parts tractor. Could be a Case 310 gas, not sure. I hate to scrap it. Would like $1500 obo; Dave nnn-nnn-nnnn (Carson City NV) [link to photo]
Case C, 1929, complete and stuck, on cut downs to rubber has rare flat belt water pump, $600 obo. Also parting out Case C, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 rear round spoke wheels 9x24, very nice and rare, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case D parts: manifold, valve cover, radiator cap, call for details; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)
Case G320W. Tractor loader backhoe. Runs and drives, needs hydraulic hoses, $1250; nnn-nnn-nnnn (Rainier OR)
Case VAC, 1952, single front end, runs good. Lots of work done on tractor, have all manuals; Ray Gossett nnn-nnn-nnnn (Hermiston OR)
Case VAI Industrial tractor with front street sweeper attachment, extra brush. Just in, call for details; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)
Case wide tread tractor, 1936, on full steel, includes set of rubber tires & wheels plus a cultivator, $5250 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)
Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar 10 parts, mostly castings; Buck nnn-nnn-nnnn (Greenville IL)
Caterpillar 10's: 1 Narrow stuck, $500. 1 Narrow not stuck has carb, $2,000. 1 Wide not stuck has carb, $2,500; Aaron nnn-nnn-nnnn (Walnut Grove CA) [link to photo]
Caterpillar 22 project tractor, complete, excellent tractor, was going to restore but now unable, $1500 or possible trade; Don Travis nnn-nnn-nnnn (Fallon NV)
Caterpillar 2-Ton. Runs well, $3750; Jim Messick nnn-nnn-nnnn (Linden CA) [link to photo]
Caterpillar D2 5J series wide gauge tractor. Runs good, has a hydraulic bulldozer blade, brand unknown. Undercarriage fair. Located in Eureka NV, $2500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D2 dozer, 1938, $2850 obo; Lynn Pekarek nnn-nnn-nnnn (Chico CA)
Caterpillar D2 engine side panels, $195 per pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Caterpillar D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Caterpillar D4 angle dozer elect. Pony engine $3900 obo; Lynn Pekarek nnn-nnn-nnnn (Chico CA)
Caterpillar D7-3T series, 1948. Runs very good. Has electric start pony which runs well. Has hydraulic assist steering, and forward/reverse lever. Undercarriage is good, grousers are a little low. Tractor is bare, no attachments, $3500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95. Photos available by email; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)
Caterpillar Thirty tail seat tractor, nearly complete not stuck; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Centaur KM tractor, cute little "orphan" tractor, approx. 1940, LeRoi engine, looks good, $600. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)
Cletrac AD 1936 Hercules diesel, hydraulic dozer (Issacson), valves ground, cylinders honed. Diesel pump gone through and adjusted, starter gone through, steering bands replaced, good tracks, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2 1937 Buda diesel, valves ground, starter gone through, diesel pump cleaned and gone through and adjusted, set for pressure. Sand blasted and painted. Cylinders honed. Good tracks. $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac HG31 narrow gauge crawler, little over three feet wide total. Been sitting for many years but motor will turn, would make great restoration. Has nice original tag. Good tracks, $2200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Cletrac W, nearly complete, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Collection of original Caterpillar Manuals for early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25.00 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)
Eisemann G-4 magneto, rebuilt, $275; Alan Langmuir nnn-nnn-nnnn (West Sacramento CA)
Empire, 1948, these tractors were built after WWII using Willys jeep drivetrains. The engine in this tractor is not original, but is a professionally rebuilt counterbalanced flathead 4 Jeep engine. All electrical has been converted to 12v (including the starter). This would make a great tractor drive tractor as it easily does 20 mph before the tire balance comes into play. $4000 obo; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR) [link to photo]
Ensign carbs for Cat 20, 30 all rebuilt $450. D2-D6 battery box covers with thumb screws $80; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Farmall 400 diesel runs Factory wide front with Behlen power steering good sheet metal, $1750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A comes with sickle bar mower, plow, other attachments. Very nice condition, $1450 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall AV 1952, new front tires, gauges, kill switch, seat, steering wheel, breather cap, gas cap, radiator cap, front wheel weights, rears if wanted. Reconditioned cultivators, magneto, starter, 3 lights, every bolt and nut will turn. Cream puff!! Just needs paint. Tin is perfect, $2650 obo; Roger nnn-nnn-nnnn (Redding CA) [link to photo]
Farmall Cub LoBoy, 1958, new tires, front wheel weights, fast hitch with fast hitch plow, fast hitch trailer ball. Runs good. Have new wire harness and head lights, $2400; John Loder nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA) [link to photo]
Farmall Cub, hydraulics, cultivators, PTO pulley. Runs great $1100 or offer or trades; Klein Tractor nnn-nnn-nnnn (Rainier OR)
Farmall F 14, sn FS 45424. Single front wheel. Tires are shot. Tractor is complete except for hood, $400. Also the mowing machine for Farmall F 14. 7 foot bar. Complete except for wood arm, $100. PTO unit that bolts to the back of tractor; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Farmall F-12, 1936. Older restoration with F-14 drive train for lower gear ratio for tractor pulls, new rear rubber, extra set steel wheels, rebuilt engine, new radiator, high altitude pistons, $1800 obo; Alan Langmuir 916 524-7055 (West Sacramento CA)
Farmall live hydraulic pump, fast hitch drawbar large, misc parts; Al nnn-nnn-nnnn (Elko NV)
Farmall M, 1952. Restored with 4 new tires, good paint, rebuilt engine, parade ready, runs good, $4000; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)
Farmall sheet metal from A to 450 plus a bunch of misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall SM 1953 with loader. Farmall SH 1954, $4850; Al nnn-nnn-nnnn (Elko NV)
Farmall Super A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Super H, 1954, restored, $4850; Al nnn-nnn-nnnn (Elko NV)
Farmall Super H, runs good, good tires. Have IH Wide and Narrow front ends. Have rear lift made by IH, $2,500; Aaron nnn-nnn-nnnn (Walnut Grove CA) [link to photo]
Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Fender weights, 300 lb each or better, bolts on like fenders. Came off Ford 851. Will fit Massey & others, $100 each; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)
Ferguson F35, OHV engine, 3+2 transmission, good tin, tires, and paint, $3100; David Gibson nnn-nnn-nnnn leave message (Morgan Hill CA)
Ferguson TO-30 and rear half of a TO-20 parting out. Some tin in fair to good condition. Engine, transmission, rear end, fuel tank with toolbox, dash, steering, etc. No lights or wheels. Reasonable prices or trades, obo. Open to deal, prefer you pickup but may be able to ship smaller parts. Don't make me haul this stuff to Tulare; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ferguson TO-30, one owner (Lundy, Madras OR). Runs great. Original lights work. Good tin, front tires great, rear tires 50% or less. Needs new paint, $2200; Dennis nnn-nnn-nnnn (Powell Butte OR)
Ford (2002-2004?) with 3 cylinder diesel, new rear long bar/short bar tires, paint is blue and grey; Perry Rosenquist nnn-nnn-nnnn (Noonan ND)
Ford 1953 Golden Jubilee with hydraulic front blade that angles and offsets. Nice set up with power down! Also has a fully functional Scout backhoe; works great. Tractor has excellent sheet metal and runs like a top. Call or email for pictures, $3750; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)
Ford 3 cylinder engine, 201, gas, new, never ran, complete, came in Ford 4000 and 3000 tractors, $1000; Larry Manley nnn-nnn-nnnn (Dorris CA)
Ford 661 runs good. Really smooth factory power steering. Fair rubber sheet metal good. New electronic ignition, water pump and 12 volt alternator, $2800; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)
Ford 8N (early) nicely restored, new tires, $3000 Email or call for pictures; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)
Ford 8N, 1948, with dealer installed, when tractor was new, high clearance option. Bought from original owner. Tractor restored in 1992 and kept in garage. 38" rears and 19" fronts. Runs perfect on 6 volt system. Has Sherman Cable Shift step down with dip stick and drain plug for the Sherman. Tractor has many unique options. Can e-mail more photos. $8500; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA) [link to photo]
Ford 9N with Dearborn belly mount sickle mower. Just in; call for details; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)
Ford gear down transmission. Made by Everett Trenching Co of Los Angeles. Same as Sherman. Fits Jubilee, NAA, 600, 800, 900. Came off of 820 5-speed; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)
Fordson Trackson crawler, 1927, all complete with great paint, owned over 25 years, was running great when stored, price reduced to $5900 obo; Mike Tyler nnn-nnn-nnnn (Moore MT) [link to photo]
Fordson tractors: Would like to trim down my Fordson collection. I have about 9 of them ranging from parts tractors to complete tractors in various conditions. Some on steel, some on cutdowns, some with Hamilton transmissions, one with a Hyster double drum winch. Most are $800 to $2000 range; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)
Grille for John Deere 110, NOS, part #M1906T, $40; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
International 300 Utility with power steering and a nice loader. Sheet metal good. Tractor runs good, tires ok, $4000; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)
International 350 Hi-Utility fast hitch 1 remote runs, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International Harvester T20 crawler tractor. Does not run, has a hole in the block. Parts tractor or restoration. Weighs 7100# as is. Will assist in loading, $599. Email for more pictures; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA) [link to photo]
International Super A, 5’ Woods underbody mower, 4’-8” push blade. This is a very good running/operating tractor, $2150; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)
International TD14A dozer tractor, 1955, sn 39801. Does not run, cable angle blade, Carco winch, cable front unit, international UD14 engine, 11' wide blade, great for parts or restoration, still does not run, engine appears to be frozen, will load on your truck, $1999. Email for more pictures; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA) [link to photo]
International TD-9, hydraulic angle dozer, engine stuck, need final, have all the parts to repair, have spare engine, $1000; Larry Manley nnn-nnn-nnnn (Dorris CA)
International TD-6 series II direct start 6 cyl. Diesel hydraulic blade with hydraulic tilt built up grousers-good yellow paints engine wants to lope at idle. Probably needs adjustment on governor. Good solid dozer, $4250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
International tractors: 1944 (no model listed), excellent condition, new paint job, narrow front, 12 volt, hydraulics; 1939 W-30, good steel, 4 new tires; 1938 10-20 on good steel lugs (original), new paint job and decals, runs very good; Perry Rosenquist nnn-nnn-nnnn (Noonan ND)
John Deere 420, 1958. Running when parked, restoration started but not completed. Partially apart. Head rebuilt, gas tank and steering shaft out, carb & manifold off. Lost interest. Have 2 extra hoods and complete hydraulic seal kit $2700; Roland Bleitz nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)
John Deere 2 cylinder crawler parts. lots of misc. parts; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 40 and M engines and many usable engine parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
John Deere 40 cylinder head (#M-1768T), no cracks or repairs, will need new exhaust seats, $100. Exhaust manifold (M-1799T), sound, $65. Carburetor (TSX-530), $50. Grille (fits 40C-U-S), one piece screen, needs new screen, $100. 40 fuel tank, clean inside, $50; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere 40 two rear wheel weights, restored, $75; John nnn-nnn-nnnn or nnn-nnn-nnnn (Dallas OR)
John Deere 40S, 1953, model 40S. Complete original tractor. engine stuck and needs front tires, $700. Pictures available by email.; John Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Dallas OR)
John Deere 420U slant steer, new tires, engine over hauled, new paint 5 years ago, ower steering, apart and needs repair. May need brake work. Restore or part out, $2500; Jim nnn-nnn-nnnn (Santa Barbara CA)
John Deere 420-W, 5 spd trans, 1958. Running when parked 7 years ago, head has since been rebuilt, carb apart, gas tank out, steering shaft out, have complete new trans seal parts, carb kit, other seals. 2 extra hoods. 1-rear tire 90%, other 60%. I've lost interest in it. All there, just needs to be put back together by someone that knows these. $2750; Roland nnn-nnn-nnnn (Grants Pass OR)
John Deere 520 row crop. 9.5-42 rear single front, sn 5207795. Tractor is in very good condition. Put it in the field or add it to your collection. Power steering, live PTO, original three point hitch, hydraulic lift cylinder for front cultivator. Live hydraulics, sealed beam lights. All the fluids have been changed and everything works, $6500 or offer; Rick nnn-nnn-nnnn (Kuna ID) [link to photo]
John Deere 60 parted out, lots left: crank, head, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 60 wide front, excellent sheet metal, recent engine work. Very handsome John Deere ready for proper restoration, $3975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere 820 black dash tractor. Both engines rebuilt, 12 wheel weights, power steering, float ride seat, and cyl bracket. Good rust free tractor $8000; Russell Turner nnn-nnn-nnnn (McArthur CA)
John Deere A, late style '51-52 parting out. No sheet metal or front pedestal. Front pressed steel frame, no cracks or welds, $75; Dale Longhurst nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta UT)
John Deere A, unstyled, parting out. Has F&H cast iron front wheels, but no rims no gas tank, carb or mag; Dale Longhurst nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta UT)
John Deere B carburetor, $75; John nnn-nnn-nnnn or nnn-nnn-nnnn (Dallas OR)
John Deere B, 1937, runs good, ready for restoration, $1800; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)
John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, early styled, parting out. Has sheet metal, no head or block; Dale Longhurst nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta UT)
John Deere B, has BWH front end with one long extension, not running, $2400 for complete tractor, front end available separately. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)
John Deere BN, sn 268706, 1950. Engine overhauled. Starter, magneto, carburetor, generator overhauled. Original 3 point, auxiliary oil pump. One remote. Repainted, $4000; KD Cowan nnn-nnn-nnnn (Grandview WA)
John Deere BO Lindeman frame $400 or offer; Russell Brown nnn-nnn-nnnn (Newberg OR)
John Deere BO, 1937, runs good, been in lots of parades, and hay rides. Has almost new tires and brakes are very good. Rebuilt and painted about ten years ago, with new aftermarket fenders, $4900; John Loder nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)
John Deere BR, 1936. Rough & rusty but complete & engine is free. Has good factory round spoke rear wheels, $1200; Dave Itel nnn-nnn-nnnn (Aurora OR)
John Deere D, 1935, complete, not stuck. Comes with brand new fenders & hood, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, 1946, runs great, $1800; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)
John Deere L radiator, $75; Buck nnn-nnn-nnnn (Greenville IL)
John Deere L, 1939? Very straight tractor in running condition. Good tires and wheels. Comes with cultivators, $3975 obo, some trade? Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere Lindeman crawler, sn 336407. Excellent condition, runs hand start, good tracks, no blade, $7,000 or offer. Call after 3PM; Russell Brown nnn-nnn-nnnn (Newberg OR)
John Deere M, 1948, runs good with good sheet metal and tires, older restoration, $2750. Email for photos; John Boehm xxxx@xxxx.xxx or www.vintagetractors.com (Woodland CA)
John Deere MC, sn 15436, 1952. With Yakima Works dozer model AN, sn 3077. Engine completely overhauled. Steering clutches overhauled. Undercarriage 75%. Repainted, $7000; KD Cowan nnn-nnn-nnnn (Grandview WA)
John Deere R, sn 21372, 1954. Restored. Starting engine completely overhauled. Four new tires. Sheet metal very straight, repainted, $7500; KD Cowan nnn-nnn-nnnn (Grandview WA)
John Deere: John Deere A, unstyled, needs to be restored. Also John Deere 40U, runs but needs TLC; D. Walchli nnn-nnn-nnnn (Hermiston OR)
Kubota L245, L295 parts POR, used loader off L295, $1,500, also Kubota B7100 parts. Kubota 36” 3pt pto rotary tiller $950; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Magneto for Cat D2 and D4 staring motor $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Massey Ferguson 35 diesel. 3 pt. Overriding clutch, very good sheet metal, good front wheels and tires. Good rear tires on spin-out wheels. Runs good, $2975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Massey Ferguson 35. Farmed last season. Good loaded tires. Gas, electronic ignition, $2200; nnn-nnn-nnnn (Rainier OR)
Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Massey Harris 55 diesel. Engine free, does not run, fuel injector pump will not make pressure. Has two bad tires, needs paint. Sheet metal is straight. Would make a nice pulling tractor, $1850; Paul Valentine nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)
Massey Harris 65 gas, sn 682854, 1961 model, 3 pt, power steering, original. Located in Evans/Greenly CO. $4200; Jim Robinett nnn-nnn-nnnn or tractrmnul.aol.com
McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O-4: Runs, missing orchard sheet metal, $1000. McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $650. McCormick Deering O-4, parting out: batwings/engine side panels, orchard belt pulley, hood, shutters, all-fuel manifold, exhaust elbow plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering OS 6, sn OBKS 15885. Tires are shot. Complete except for the belt pulley. Pulley gears, control and housing is there, $400; Wilbur Reil nnn-nnn-nnnn (Davis CA)
McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering T-40 crawler, engine is free, needs intake manifold, sheet metal good, under carriage is real good, tractor is complete, $1000; Larry Manley nnn-nnn-nnnn (Dorris CA)
McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)